Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
841 lines
35 KiB
Text
841 lines
35 KiB
Text
STP-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
MODULE-IDENTITY, Counter32, TimeTicks, OBJECT-TYPE, Integer32
|
||
FROM SNMPv2-SMI
|
||
MODULE-COMPLIANCE, OBJECT-GROUP
|
||
FROM SNMPv2-CONF
|
||
gbnL2 FROM ADMIN-MASTER-MIB;
|
||
|
||
|
||
stpMib MODULE-IDENTITY
|
||
LAST-UPDATED "9904230031Z" -- April 23, 1999
|
||
ORGANIZATION "admin Inc."
|
||
CONTACT-INFO
|
||
"admin
|
||
E-mail: "
|
||
|
||
DESCRIPTION "STP module management."
|
||
|
||
REVISION "9905130000Z" -- May 13, 1999
|
||
DESCRIPTION "Initial Version"
|
||
|
||
::= { gbnL2 3 }
|
||
|
||
stpMIBObjects OBJECT IDENTIFIER ::= { stpMib 1 }
|
||
stpDot1dStp OBJECT IDENTIFIER ::= { stpMIBObjects 1 }
|
||
|
||
|
||
-- All representations of MAC addresses in this MIB Module
|
||
-- use, as a textual convention (i.e. this convention does
|
||
-- not affect their encoding), the data type:
|
||
|
||
-- MacAddress ::= OCTET STRING (SIZE (6)) a 6 octet address
|
||
-- in the
|
||
-- "canonical"
|
||
-- order
|
||
-- defined by IEEE 802.1a, i.e., as if it were transmitted
|
||
-- least significant bit first, even though 802.5 (in
|
||
-- contrast to other n802.x protocols) requires MAC
|
||
-- addresses to be transmitted most significant bit first.
|
||
--
|
||
-- 16-bit addresses, if needed, are represented by setting
|
||
-- their upper 4 octets to all 0's, i.e., AAFF would be
|
||
-- represented as 00000000AAFF.
|
||
|
||
|
||
-- Similarly, all representations of Bridge-Id in this MIB
|
||
-- Module use, as a textual convention (i.e. this
|
||
-- convention does not affect their encoding), the data
|
||
-- type:
|
||
|
||
BridgeId ::= OCTET STRING (SIZE (8)) -- the
|
||
-- Bridge-Identifier
|
||
-- as used in the
|
||
-- Spanning Tree
|
||
-- Protocol to uniquely identify a bridge. Its first two
|
||
-- octets (in network byte order) contain a priority
|
||
-- value and its last 6 octets contain the MAC address
|
||
-- used to refer to a bridge in a unique fashion
|
||
-- (typically, the numerically smallest MAC address
|
||
-- of all ports on the bridge).
|
||
-- Several objects in this MIB module represent values of
|
||
-- timers used by the Spanning Tree Protocol. In this
|
||
-- MIB, these timers have values in units of hundreths of
|
||
-- a second (i.e. 1/100 secs).
|
||
-- These timers, when stored in a Spanning Tree Protocol's
|
||
-- BPDU, are in units of 1/256 seconds. Note, however,
|
||
-- that 802.1D-1990 specifies a settable granularity of
|
||
-- no more than 1 second for these timers. To avoid
|
||
-- ambiguity, a data type is defined here as a textual
|
||
-- convention and all representation of these timers
|
||
-- in this MIB module are defined using this data type. An
|
||
-- algorithm is also defined for converting between the
|
||
-- different units, to ensure a timer's value is not
|
||
-- distorted by multiple conversions.
|
||
-- The data type is:
|
||
|
||
Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
|
||
|
||
-- To convert a Timeout value into a value in units of
|
||
-- 1/256 seconds, the following algorithm should be used:
|
||
--
|
||
-- b = floor( (n * 256) / 100)
|
||
--
|
||
-- where:
|
||
-- floor = quotient [ignore remainder]
|
||
-- n is the value in 1/100 second units
|
||
-- b is the value in 1/256 second units
|
||
--
|
||
-- To convert the value from 1/256 second units back to
|
||
-- 1/100 seconds, the following algorithm should be used:
|
||
--
|
||
-- n = ceiling( (b * 100) / 256)
|
||
--
|
||
-- where:
|
||
-- ceiling = quotient [if remainder is 0], or
|
||
-- quotient + 1 [if remainder is non-zero]
|
||
-- n is the value in 1/100 second units
|
||
-- b is the value in 1/256 second units
|
||
--
|
||
-- Note: it is important that the arithmetic operations are
|
||
-- done in the order specified (i.e., multiply first, divide
|
||
-- second).
|
||
|
||
|
||
-- the stpDot1dStp group
|
||
|
||
-- Implementation of the dot1dStp group is optional. It is
|
||
-- implemented by those bridges that support the Spanning Tree
|
||
-- Protocol.
|
||
|
||
|
||
stpDot1dStpProtocolSpecification OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
unknown(1),
|
||
decLb100(2),
|
||
ieee8021d(3)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"An indication of what version of the Spanning
|
||
Tree Protocol is being run. The value
|
||
'decLb100(2)' indicates the DEC LANbridge 100
|
||
Spanning Tree protocol. IEEE 802.1d
|
||
implementations will return 'ieee8021d(3)'. If
|
||
future versions of the IEEE Spanning Tree Protocol
|
||
are released that are incompatible with the
|
||
current version a new value will be defined."
|
||
::= { stpDot1dStp 1 }
|
||
|
||
stpDot1dStpPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..61440)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { 32768:all }
|
||
The value of the write-able portion of the Bridge
|
||
ID, i.e., the first two octets of the (8 octet
|
||
long) Bridge ID. The other (last) 6 octets of the
|
||
Bridge ID are given by the value of
|
||
dot1dBaseBridgeAddress.The value has to be a multiple
|
||
of 4096"
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.7"
|
||
::= { stpDot1dStp 2 }
|
||
|
||
stpDot1dStpTimeSinceTopologyChange OBJECT-TYPE
|
||
SYNTAX TimeTicks
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The time (in hundredths of a second) since the
|
||
last time a topology change was detected by the
|
||
bridge entity."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
||
::= { stpDot1dStp 3 }
|
||
|
||
stpDot1dStpTopChanges OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The total number of topology changes detected by
|
||
this bridge since the management entity was last
|
||
reset or initialized."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
||
::= { stpDot1dStp 4 }
|
||
|
||
stpDot1dStpDesignatedRoot OBJECT-TYPE
|
||
SYNTAX BridgeId
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The bridge identifier of the root of the spanning
|
||
tree as determined by the Spanning Tree Protocol
|
||
as executed by this node. This value is used as
|
||
the Root Identifier parameter in all Configuration
|
||
Bridge PDUs originated by this node."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.1"
|
||
::= { stpDot1dStp 5 }
|
||
|
||
stpDot1dStpRootCost OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The cost of the path to the root as seen from
|
||
this bridge."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.2"
|
||
::= { stpDot1dStp 6 }
|
||
|
||
stpDot1dStpRootPort OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port number of the port which offers the
|
||
lowest cost path from this bridge to the root
|
||
bridge."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.3"
|
||
::= { stpDot1dStp 7 }
|
||
|
||
stpDot1dStpMaxAge OBJECT-TYPE
|
||
SYNTAX Timeout (600..4000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The maximum age of Spanning Tree Protocol
|
||
information learned from the network on any port
|
||
before it is discarded, in units of hundredths of
|
||
a second. This is the actual value that this
|
||
bridge is currently using."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.4"
|
||
::= { stpDot1dStp 8 }
|
||
|
||
stpDot1dStpHelloTime OBJECT-TYPE
|
||
SYNTAX Timeout (100..1000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The amount of time between the transmission of
|
||
Configuration bridge PDUs by this node on any port
|
||
when it is the root of the spanning tree or trying
|
||
to become so, in units of hundredths of a second.
|
||
This is the actual value that this bridge is
|
||
currently using."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.5"
|
||
::= { stpDot1dStp 9 }
|
||
|
||
stpDot1dStpHoldTime OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This time value determines the interval length
|
||
during which no more than two Configuration bridge
|
||
PDUs shall be transmitted by this node, in units
|
||
of hundredths of a second."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.14"
|
||
::= { stpDot1dStp 10 }
|
||
|
||
stpDot1dStpForwardDelay OBJECT-TYPE
|
||
SYNTAX Timeout (400..3000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This time value, measured in units of hundredths
|
||
of a second, controls how fast a port changes its
|
||
spanning state when moving towards the Forwarding
|
||
state. The value determines how long the port
|
||
stays in each of the Listening and Learning
|
||
states, which precede the Forwarding state. This
|
||
value is also used, when a topology change has
|
||
been detected and is underway, to age all dynamic
|
||
entries in the Forwarding Database. [Note that
|
||
this value is the one that this bridge is
|
||
currently using, in contrast to
|
||
stpDot1dStpBridgeForwardDelay which is the value that
|
||
this bridge and all others would start using
|
||
if/when this bridge were to become the root.]"
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.6"
|
||
::= { stpDot1dStp 11 }
|
||
|
||
stpDot1dStpBridgeMaxAge OBJECT-TYPE
|
||
SYNTAX Timeout (600..4000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { 2000:all }
|
||
The value that all bridges use for MaxAge when
|
||
this bridge is acting as the root. Note that
|
||
802.1D-1990 specifies that the range for this
|
||
parameter is related to the value of
|
||
stpDot1dStpBridgeHelloTime. The granularity of this
|
||
timer is specified by 802.1D-1990 to be 1 second.
|
||
An agent may return a badValue error if a set is
|
||
attempted to a value which is not a whole number
|
||
of seconds."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.8"
|
||
::= { stpDot1dStp 12 }
|
||
|
||
stpDot1dStpBridgeHelloTime OBJECT-TYPE
|
||
SYNTAX Timeout (100..1000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { 200:all }
|
||
The value that all bridges use for HelloTime when
|
||
this bridge is acting as the root. The
|
||
granularity of this timer is specified by 802.1D-
|
||
1990 to be 1 second. An agent may return a
|
||
badValue error if a set is attempted to a value
|
||
which is not a whole number of seconds."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.9"
|
||
::= { stpDot1dStp 13 }
|
||
|
||
stpDot1dStpBridgeForwardDelay OBJECT-TYPE
|
||
SYNTAX Timeout (400..3000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { 1500:all }
|
||
The value that all bridges use for ForwardDelay
|
||
when this bridge is acting as the root. Note that
|
||
802.1D-1990 specifies that the range for this
|
||
parameter is related to the value of
|
||
stpDot1dStpBridgeMaxAge. The granularity of this
|
||
timer is specified by 802.1D-1990 to be 1 second.
|
||
An agent may return a badValue error if a set is
|
||
attempted to a value which is not a whole number
|
||
of seconds."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.3.10"
|
||
::= { stpDot1dStp 14 }
|
||
|
||
stpPropStpEnable OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enabled(1),
|
||
disabled(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { enabled:all }
|
||
The enabled/disabled status of STP for the bridge entity."
|
||
::= { stpDot1dStp 16 }
|
||
|
||
-- The Spanning Tree Port Table
|
||
|
||
stpDot1dStpPortTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF StpDot1dStpPortEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A table that contains port-specific information
|
||
for the Spanning Tree Protocol."
|
||
::= { stpDot1dStp 15 }
|
||
|
||
stpDot1dStpPortEntry OBJECT-TYPE
|
||
SYNTAX StpDot1dStpPortEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A list of information maintained by every port
|
||
about the Spanning Tree Protocol state for that
|
||
port."
|
||
INDEX { stpDot1dStpPort }
|
||
::= { stpDot1dStpPortTable 1 }
|
||
|
||
StpDot1dStpPortEntry ::=
|
||
SEQUENCE {
|
||
stpDot1dStpPort
|
||
INTEGER,
|
||
stpDot1dStpPortPriority
|
||
INTEGER,
|
||
stpDot1dStpPortState
|
||
INTEGER,
|
||
stpDot1dStpPortEnable
|
||
INTEGER,
|
||
stpDot1dStpPortPathCost
|
||
INTEGER,
|
||
stpDot1dStpPortDesignatedRoot
|
||
BridgeId,
|
||
stpDot1dStpPortDesignatedCost
|
||
Integer32,
|
||
stpDot1dStpPortDesignatedBridge
|
||
BridgeId,
|
||
stpDot1dStpPortDesignatedPort
|
||
OCTET STRING,
|
||
stpDot1dStpPortForwardTransitions
|
||
Counter32,
|
||
stpDot1dRemoteLoopDetect
|
||
INTEGER,
|
||
stpDot1wRstpPortTxHoldCount
|
||
INTEGER,
|
||
stpDot1wRstpPortOperP2p
|
||
INTEGER,
|
||
stpDot1wRstpPortOperEdge
|
||
INTEGER,
|
||
stpDot1wRstpPortMcheck
|
||
INTEGER,
|
||
stpDot1wRstpPortTxTcn
|
||
INTEGER,
|
||
stpDot1wRstpPortTxConfig
|
||
INTEGER,
|
||
stpDot1wRstpPortTxRstp
|
||
INTEGER,
|
||
stpDot1wRstpPortRxTcn
|
||
INTEGER,
|
||
stpDot1wRstpPortRxConfig
|
||
INTEGER,
|
||
stpDot1wRstpPortRxRstp
|
||
INTEGER,
|
||
stpDot1wRstpPortClear
|
||
INTEGER,
|
||
stpDot1wRstpPortAdminP2p
|
||
INTEGER,
|
||
stpDot1wRstpPortAdminEdge
|
||
INTEGER
|
||
}
|
||
|
||
stpDot1dStpPort OBJECT-TYPE
|
||
SYNTAX INTEGER (1..128)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port number of the port for which this entry
|
||
contains Spanning Tree Protocol management
|
||
information."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 6.8.2.1.2"
|
||
::= { stpDot1dStpPortEntry 1 }
|
||
|
||
stpDot1dStpPortPriority OBJECT-TYPE
|
||
SYNTAX INTEGER (0..240)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { 128:all }
|
||
The value of the priority field which is
|
||
contained in the first (in network byte order)
|
||
octet of the (2 octet long) Port ID. The other
|
||
octet of the Port ID is given by the value of
|
||
stpDot1dStpPort.The value has to be a multiple
|
||
of 16"
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.1"
|
||
::= { stpDot1dStpPortEntry 2 }
|
||
|
||
stpDot1dStpPortState OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
disabled(1),
|
||
blocking(2),
|
||
listening(3),
|
||
learning(4),
|
||
forwarding(5),
|
||
broken(6)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The port's current state as defined by
|
||
application of the Spanning Tree Protocol. This
|
||
state controls what action a port takes on
|
||
reception of a frame. If the bridge has detected
|
||
a port that is malfunctioning it will place that
|
||
port into the broken(6) state. For ports which
|
||
are disabled (see stpDot1dStpPortEnable), this object
|
||
will have a value of disabled(1)."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.2"
|
||
::= { stpDot1dStpPortEntry 3 }
|
||
|
||
|
||
stpDot1dStpPortEnable OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enabled(1),
|
||
disabled(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The enabled/disabled status of the port."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.2"
|
||
::= { stpDot1dStpPortEntry 4 }
|
||
|
||
stpDot1dStpPortPathCost OBJECT-TYPE
|
||
SYNTAX INTEGER (1..200000000)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { 10:all }
|
||
The contribution of this port to the path cost of
|
||
paths towards the spanning tree root which include
|
||
this port. 802.1D-1990 recommends that the
|
||
default value of this parameter be in inverse
|
||
proportion to the speed of the attached LAN."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.3"
|
||
::= { stpDot1dStpPortEntry 5 }
|
||
|
||
stpDot1dStpPortDesignatedRoot OBJECT-TYPE
|
||
SYNTAX BridgeId
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The unique Bridge Identifier of the Bridge
|
||
recorded as the Root in the Configuration BPDUs
|
||
transmitted by the Designated Bridge for the
|
||
segment to which the port is attached."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.4"
|
||
::= { stpDot1dStpPortEntry 6 }
|
||
|
||
stpDot1dStpPortDesignatedCost OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The path cost of the Designated Port of the
|
||
segment connected to this port. This value is
|
||
compared to the Root Path Cost field in received
|
||
bridge PDUs."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.5"
|
||
::= { stpDot1dStpPortEntry 7 }
|
||
|
||
stpDot1dStpPortDesignatedBridge OBJECT-TYPE
|
||
SYNTAX BridgeId
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Bridge Identifier of the bridge which this
|
||
port considers to be the Designated Bridge for
|
||
this port's segment."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.6"
|
||
::= { stpDot1dStpPortEntry 8 }
|
||
|
||
stpDot1dStpPortDesignatedPort OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (2))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Port Identifier of the port on the Designated
|
||
Bridge for this port's segment."
|
||
REFERENCE
|
||
"IEEE 802.1D-1990: Section 4.5.5.7"
|
||
::= { stpDot1dStpPortEntry 9 }
|
||
|
||
stpDot1dStpPortForwardTransitions OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The number of times this port has transitioned
|
||
from the Learning state to the Forwarding state."
|
||
::= { stpDot1dStpPortEntry 10 }
|
||
|
||
stpDot1dRemoteLoopDetect OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enabled(1),
|
||
disabled(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The LOOP DETECT status of the port."
|
||
--<2D>˿<EFBFBD>˽<EFBFBD><CBBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD>/<2F>ر<EFBFBD>״̬
|
||
::= { stpDot1dStpPortEntry 11 }
|
||
|
||
stpDot1wRstpPortTxHoldCount OBJECT-TYPE
|
||
SYNTAX INTEGER(1..255)
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Maximum number of BPDUs allowed to be transmitted during per helloTime"
|
||
--<2D>˿<EFBFBD><CBBF><EFBFBD>ÿ<EFBFBD><C3BF>helloTimeʱ<65><CAB1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͵<EFBFBD><CDB5><EFBFBD><EFBFBD><EFBFBD>BPDU<44><55>
|
||
::= { stpDot1dStpPortEntry 12 }
|
||
|
||
stpDot1wRstpPortOperP2p OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
true(1),
|
||
false(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The operational point-to-point status of the LAN segment attached to this port"
|
||
--<2D>˿<EFBFBD>ʵ<EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5>Ե<EFBFBD><D4B5><EFBFBD><EFBFBD><EFBFBD>״̬
|
||
::= { stpDot1dStpPortEntry 13 }
|
||
|
||
stpDot1wRstpPortOperEdge OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
true(1),
|
||
false(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The operational value of the Edge Port parameter"
|
||
--<2D>˿<EFBFBD>ʵ<EFBFBD>ʹ<EFBFBD><CAB9><EFBFBD><EFBFBD>ı߽<C4B1><DFBD>˿<EFBFBD>״̬
|
||
::= { stpDot1dStpPortEntry 14 }
|
||
|
||
stpDot1wRstpPortMcheck OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enable(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"force port into transmitting rstp packets"
|
||
--ǿ<>ƶ˿ڷ<CBBF><DAB7><EFBFBD>RSTP<54><50><EFBFBD><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 15 }
|
||
|
||
stpDot1wRstpPortTxTcn OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Output statistics of TCN packets"
|
||
--<2D>˿ڷ<CBBF><DAB7>͵<EFBFBD>TCN<43><4E><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 16 }
|
||
|
||
stpDot1wRstpPortTxConfig OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Output statistics of CONFIG packets"
|
||
--<2D>˿ڷ<CBBF><DAB7>͵<EFBFBD>CONFIG<49><47><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 17 }
|
||
|
||
stpDot1wRstpPortTxRstp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Output statistics of RSTP packets"
|
||
--<2D>˿ڷ<CBBF><DAB7>͵<EFBFBD>RSTP<54><50><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 18 }
|
||
|
||
stpDot1wRstpPortRxTcn OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Input statistics of TCN packets"
|
||
--<2D>˿ڽ<CBBF><DABD>յ<EFBFBD>TCN<43><4E><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 19 }
|
||
|
||
stpDot1wRstpPortRxConfig OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Input statistics of CONFIG packets"
|
||
--<2D>˿ڽ<CBBF><DABD>յ<EFBFBD>CONFIG<49><47><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 20 }
|
||
|
||
stpDot1wRstpPortRxRstp OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Input statistics of RSTP packets"
|
||
--<2D>˿ڽ<CBBF><DABD>յ<EFBFBD>RSTP<54><50><EFBFBD>ĸ<EFBFBD><C4B8><EFBFBD>
|
||
::= { stpDot1dStpPortEntry 21 }
|
||
|
||
stpDot1wRstpPortClear OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
true(1)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Clear port spanning-tree statistics"
|
||
--<2D><><EFBFBD><EFBFBD><EFBFBD>˿<EFBFBD><CBBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͳ<EFBFBD><CDB3><EFBFBD><EFBFBD>Ϣ
|
||
::= { stpDot1dStpPortEntry 22 }
|
||
|
||
stpDot1wRstpPortAdminP2p OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
forceTrue(1),
|
||
forceFalse(2),
|
||
auto(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The administrative point-to-point status of the LAN segment attached to this port"
|
||
--<2D><><EFBFBD>õĶ˿ڵĵ<DAB5><C4B5>Ե<EFBFBD><D4B5><EFBFBD><EFBFBD><EFBFBD>״̬
|
||
::= { stpDot1dStpPortEntry 23 }
|
||
|
||
stpDot1wRstpPortAdminEdge OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enable(1),
|
||
disable(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The administrative value of the Edge Port parameter"
|
||
--<2D><><EFBFBD>õı߽<C4B1><DFBD>˿<EFBFBD>״̬
|
||
::= { stpDot1dStpPortEntry 24 }
|
||
|
||
spanOnOff OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
enable(1),
|
||
disable(2)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"DURABLE: { enable }
|
||
Enable/Disable Spanning Tree for the bridge.
|
||
When 'disable(2)', all ports of the device are placed in the
|
||
forwarding mode, regardless of current Spanning Tree state.
|
||
When 'enable(1)', the normal STP state transitions take place."
|
||
::= { stpDot1dStp 17 }
|
||
|
||
stpDot1wRstpForceVersion OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
ForceStp(0),
|
||
ForceRstp(2),
|
||
ForceMstp(3)
|
||
}
|
||
MAX-ACCESS read-write
|
||
STATUS current
|
||
DESCRIPTION
|
||
"which protocol mode the bridge chooses to execute ,RSTP or STP compatible"
|
||
--<2D>ŵ<EFBFBD>ǰ<EFBFBD><C7B0>Э<EFBFBD><D0AD>ģʽ<C4A3><CABD>RSTP<54><50><EFBFBD><EFBFBD>STP<54><50><EFBFBD><EFBFBD>ģʽ
|
||
::= { stpDot1dStp 19 }
|
||
|
||
stpDot1dStpTrap OBJECT IDENTIFIER ::= { stpDot1dStp 18 }
|
||
----------------------------------------------------------------------------------
|
||
--STP TRAP MIB--
|
||
----------------------------------------------------------------------------------
|
||
|
||
stpDot1dStpPortBlocking NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpPortState }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Port status is turned from forwarding to blocking."
|
||
::= { stpDot1dStpTrap 1 }
|
||
|
||
stpDot1dStpPortException NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpPort }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Port packet flood to CPU rate is too big, port exception happen."
|
||
--<2D><><EFBFBD><EFBFBD><EFBFBD>˿ڳ<CBBF><DAB3><EFBFBD>CPU<50>ı<EFBFBD><C4B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̫<EFBFBD><CCAB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><F2B7A2B3>˿<EFBFBD><CBBF>쳣<EFBFBD><ECB3A3>trap
|
||
::= { stpDot1dStpTrap 2 }
|
||
|
||
stpDot1dStpPortRecover NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpPort }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Port recover time pass after port encounter port CAR exception, and Port packet flood to CPU rate is normal, recover port."
|
||
--<2D>˿ڱ<CBBF><DAB1>˿<EFBFBD>CAR<41>رպ<D5BA><F3A3ACB9>˶˿ڻָ<DABB>ʱ<EFBFBD>䣬<EFBFBD><E4A3AC><EFBFBD>Ҹö˿<C3B6><CBBF>³<EFBFBD><C2B3><EFBFBD>CPU<50><55><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>´˿ڣ<CBBF><DAA3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ͷ˿ڻָ<DABB>trap
|
||
::= { stpDot1dStpTrap 3 }
|
||
|
||
stpDot1dStpPortRmtLoop NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpPort }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Port is blocked because of remote loop."
|
||
--<2D>˿<EFBFBD><CBBF><EFBFBD>ΪԶ<CEAA>˻<EFBFBD><CBBB>ض<EFBFBD><D8B6><EFBFBD>block
|
||
::= { stpDot1dStpTrap 4 }
|
||
|
||
stpDot1dStpPortRmtLoopFree NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpPort }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Port is released from remote loop."
|
||
--<2D>˿<EFBFBD>Զ<EFBFBD>˻<EFBFBD><CBBB>ؽ<EFBFBD><D8BD><EFBFBD>
|
||
::= { stpDot1dStpTrap 5 }
|
||
|
||
stpDot1dStpNewRoot NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpDesignatedRoot }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Root bridge changed for the stp."
|
||
::= { stpDot1dStpTrap 6 }
|
||
|
||
stpDot1dStpPortForwarding NOTIFICATION-TYPE
|
||
OBJECTS { stpDot1dStpPortState }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Port status is turned from blocking to forwarding."
|
||
::= { stpDot1dStpTrap 7 }
|
||
-- -----------------------------------------------------------------------------
|
||
-- STP MIB - Conformance information
|
||
-- Not really necessary other than for strict interpretation of SMIv2
|
||
-- (and it doesn't hurt anything)
|
||
-- -----------------------------------------------------------------------------
|
||
stpMIBConformance OBJECT IDENTIFIER ::= { stpMib 2 }
|
||
stpMIBGroups OBJECT IDENTIFIER ::= { stpMIBConformance 1 }
|
||
stpMIBCompliances OBJECT IDENTIFIER ::= { stpMIBConformance 2 }
|
||
|
||
stpMIBBaseGroup OBJECT-GROUP
|
||
OBJECTS {
|
||
stpDot1dStpProtocolSpecification,
|
||
stpDot1dStpPriority,
|
||
stpDot1dStpTimeSinceTopologyChange,
|
||
stpDot1dStpTopChanges,
|
||
stpDot1dStpDesignatedRoot,
|
||
stpDot1dStpRootCost,
|
||
stpDot1dStpRootPort,
|
||
stpDot1dStpMaxAge,
|
||
stpDot1dStpHelloTime,
|
||
stpDot1dStpHoldTime,
|
||
stpDot1dStpForwardDelay,
|
||
stpDot1dStpBridgeMaxAge,
|
||
stpDot1dStpBridgeHelloTime,
|
||
stpDot1dStpBridgeForwardDelay,
|
||
stpPropStpEnable,
|
||
stpDot1dStpPort,
|
||
stpDot1dStpPortPriority,
|
||
stpDot1dStpPortState,
|
||
stpDot1dStpPortEnable,
|
||
stpDot1dStpPortPathCost,
|
||
stpDot1dStpPortDesignatedRoot,
|
||
stpDot1dStpPortDesignatedCost,
|
||
stpDot1dStpPortDesignatedBridge,
|
||
stpDot1dStpPortDesignatedPort,
|
||
stpDot1dStpPortForwardTransitions
|
||
}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"STP module groups."
|
||
::= { stpMIBGroups 1 }
|
||
|
||
-- -----------------------------------------------------------------------------
|
||
-- STP MIB - Compliance information
|
||
-- -----------------------------------------------------------------------------
|
||
stpMIBCompliance MODULE-COMPLIANCE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The compliance statement for STP module."
|
||
MODULE
|
||
MANDATORY-GROUPS {
|
||
stpMIBBaseGroup
|
||
}
|
||
::= { stpMIBCompliances 1 }
|
||
|
||
END
|
||
|
||
|