Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
363 lines
13 KiB
Text
363 lines
13 KiB
Text
CTRON-RATE-POLICING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-rate-policing-mib.txt
|
|
--
|
|
-- This module provides authoritative definitions for Enterasys
|
|
-- Network's CTRON-RATE-POLICING-MIB.
|
|
|
|
-- This module will be extended, as needed.
|
|
--
|
|
-- Enterasys Networks reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Enterasys Networks
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Enterasys Networks be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Enterasys
|
|
-- Networks has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Enterasys grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Enterasys products.
|
|
--
|
|
-- Copyright November 2001-2003 Enterasys Networks, Inc.
|
|
|
|
IMPORTS
|
|
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
dot1dBasePort
|
|
FROM BRIDGE-MIB
|
|
ctPriorityExt
|
|
FROM CTRON-MIB-NAMES;
|
|
|
|
ctRatePolicing MODULE-IDENTITY
|
|
LAST-UPDATED "200304101518Z" -- Thu Apr 10 15:18 GMT 2003
|
|
ORGANIZATION "Enterasys Networks, Inc"
|
|
CONTACT-INFO
|
|
"Postal: Enterasys Networks
|
|
50 Minuteman Rd.
|
|
Andover, MA 01810-1008
|
|
USA
|
|
Phone: +1 978 684 1000
|
|
E-mail: support@enterasys.com
|
|
WWW: http://www.enterasys.com"
|
|
|
|
DESCRIPTION
|
|
"The Enterasys Rate Policing MIB module allows the user to
|
|
set maximum ingress rates on a per port, per priority basis."
|
|
|
|
REVISION "200304101518Z" -- Thu Apr 10 15:18 GMT 2003
|
|
DESCRIPTION "Added display hint to CtPriList."
|
|
|
|
REVISION "200303111553Z" -- Tue Mar 11 15:53 GMT 2003
|
|
DESCRIPTION "Changed the definitions of the CtRatePolActionList and
|
|
CtRatePolDirectionList textual conventions. The syntax
|
|
was also changed from Integer32 to INTEGER with
|
|
enumeration values that map to the prior bit positions."
|
|
|
|
REVISION "200011281551Z"
|
|
DESCRIPTION "Changed the CONTACT-INFO portion of the MODULE-IDENTITY
|
|
to reflect the company name change to Enterasys Networks.
|
|
Added ranges to the ctRatePolicingThreshHoldMin and
|
|
ctRatePolicingThreshHold leaves."
|
|
|
|
REVISION "199906210000Z"
|
|
DESCRIPTION "The initial version of this MIB module"
|
|
::= { ctPriorityExt 7 }
|
|
|
|
ctRatePolicingObjects OBJECT IDENTIFIER ::= { ctRatePolicing 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
CtPriList ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "x"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The least significant octet within this integer specifies
|
|
a set of eight priorities. Within this octet, the most
|
|
significant bit represents the highest priority(7), and
|
|
the least significant bit represents the lowest priority(0).
|
|
Thus, each priority is represented by a single bit within
|
|
the value of this object. If that bit has a value of '1'
|
|
then that priority is included in the set of priorities; the
|
|
priority is not included if its bit has a value of '0'."
|
|
SYNTAX INTEGER (0..255)
|
|
|
|
CtRatePolActionList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents a list of rate policing actions."
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
dropPacket(1),
|
|
flowCtrlPacketAndDrop(2),
|
|
dropPacketOrFlowCtrlAndDrop(3)
|
|
}
|
|
|
|
CtRatePolDirectionList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the possible traffic flow directions."
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
inbound(1),
|
|
outbound(2),
|
|
inboundAndOutbound(3)
|
|
}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Rate Policing Configuration
|
|
-- -------------------------------------------------------------
|
|
|
|
ctRatePolicingAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the rate policing feature to be globally
|
|
enabled/disabled. A value of disable(2), functionally
|
|
supersedes the ctRatePolicingRuleStatus of individual
|
|
entries in the ctRatePolicingConfigTable, but does not
|
|
change their actual values."
|
|
DEFVAL { disable }
|
|
::= { ctRatePolicingObjects 1}
|
|
|
|
ctRatePolicingConfigLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime the last time anything in the
|
|
ctRatePolicingConfigTable changed."
|
|
::= { ctRatePolicingObjects 2 }
|
|
|
|
ctRatePolicingConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CtRatePolicingConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table allows configuration of rate policing rules
|
|
on this device. Their are a limited number of resources
|
|
available for rate policing, and this directly limits the
|
|
number of rate policing rules that may be configured on
|
|
each port. As a result this table does not support dynamic
|
|
row creation, rather, all possible rows exist in either an
|
|
active or disabled state. A manager application should not,
|
|
however, infer that this configuration is necessarily fixed
|
|
during the lifetime of the managed entity. The allocation
|
|
of resources could theoretically be shifted. For example
|
|
port 20 could have 3 resources and at some point suddenly
|
|
have 4 or 2. Any such change would of course cause the
|
|
value of ctRatePolicingConfigLastChange to change. At this
|
|
time their is no defined mechanism to move these resources
|
|
and there very likely never will be. This is merely a
|
|
warning that manager applications should not count on this."
|
|
::= { ctRatePolicingObjects 3 }
|
|
|
|
ctRatePolicingConfigEntry OBJECT-TYPE
|
|
SYNTAX CtRatePolicingConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes a particular entry of ctRatePolicingConfigTable."
|
|
INDEX { dot1dBasePort, ctRatePolicingResourceIndex }
|
|
::= { ctRatePolicingConfigTable 1 }
|
|
|
|
CtRatePolicingConfigEntry ::=
|
|
SEQUENCE {
|
|
ctRatePolicingResourceIndex
|
|
INTEGER,
|
|
ctRatePolicingActionsAllowed
|
|
CtRatePolActionList,
|
|
ctRatePolicingAction
|
|
CtRatePolActionList,
|
|
ctRatePolicingThreshHoldMin
|
|
Integer32,
|
|
ctRatePolicingThreshHold
|
|
Integer32,
|
|
ctRatePolicingPriorityList
|
|
CtPriList,
|
|
ctRatePolicingRuleStatus
|
|
INTEGER,
|
|
ctRatePolicingActionsTaken
|
|
Integer32,
|
|
ctRatePolicingDirectionsAllowed
|
|
CtRatePolDirectionList,
|
|
ctRatePolicingDirection
|
|
CtRatePolDirectionList
|
|
}
|
|
|
|
ctRatePolicingResourceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies a unique resource available for configuring
|
|
a rate policing rule on this port. Each port has a limited
|
|
number of resources available for rate policing. This index
|
|
simply provides a mechanism for uniquely addressing each of
|
|
these resources."
|
|
::= { ctRatePolicingConfigEntry 1 }
|
|
|
|
ctRatePolicingActionsAllowed OBJECT-TYPE
|
|
SYNTAX CtRatePolActionList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the valid policing actions that may be
|
|
taken for this port upon exceeding the threshold specified
|
|
in ctRatePolicingThreshHold."
|
|
::= { ctRatePolicingConfigEntry 2 }
|
|
|
|
ctRatePolicingAction OBJECT-TYPE
|
|
SYNTAX CtRatePolActionList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the action to be taken if the rate limit is
|
|
exceeded. This value must be a valid action as specified
|
|
by the corresponding ctRatePolicingActionsAllowed object.
|
|
Also, no more than one action may be specified. Attempts
|
|
to set this value outside of the aforementioned guidelines
|
|
will fail."
|
|
::= { ctRatePolicingConfigEntry 3 }
|
|
|
|
ctRatePolicingThreshHoldMin OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
UNITS "kilobytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum rate limit value for this entry in kB per second."
|
|
::= { ctRatePolicingConfigEntry 4 }
|
|
|
|
ctRatePolicingThreshHold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
UNITS "kilobytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate limit value for this entry in kB per second. If the
|
|
rate is exceeded the defined action in ctRatePolicingAction
|
|
will be enforced. This value may not be set below the minimum
|
|
rate specified in ctRatePolicingThreshHoldMin."
|
|
::= { ctRatePolicingConfigEntry 5 }
|
|
|
|
ctRatePolicingPriorityList OBJECT-TYPE
|
|
SYNTAX CtPriList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the list of priorities to which this rule applies."
|
|
::= { ctRatePolicingConfigEntry 6 }
|
|
|
|
ctRatePolicingRuleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides both control and status for the
|
|
associated conceptual row in the table. The value of
|
|
active(1) indicates that device is actively applying
|
|
the rate policing rule defined by the other leaves
|
|
in this row. All other read-write leaves in this row
|
|
have an effective value of read-only while the row
|
|
is in the active state. The value of disabled(2)
|
|
indicates that this row is essentially an available
|
|
resource which MAY be configured and activated."
|
|
::= { ctRatePolicingConfigEntry 7 }
|
|
|
|
ctRatePolicingActionsTaken OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"This object counts the number of times the
|
|
ctRatePolicingAction has been enforced for this
|
|
particular entry."
|
|
::= { ctRatePolicingConfigEntry 8 }
|
|
|
|
ctRatePolicingDirectionsAllowed OBJECT-TYPE
|
|
SYNTAX CtRatePolDirectionList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the valid policing directions that may be
|
|
taken for this port."
|
|
::= { ctRatePolicingConfigEntry 9 }
|
|
|
|
ctRatePolicingDirection OBJECT-TYPE
|
|
SYNTAX CtRatePolDirectionList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the direction of the traffic flow that
|
|
will be limited."
|
|
::= { ctRatePolicingConfigEntry 10 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
ctRatePolicingConformance OBJECT IDENTIFIER ::= { ctRatePolicing 2 }
|
|
|
|
ctRatePolicingGroups OBJECT IDENTIFIER ::= { ctRatePolicingConformance 1 }
|
|
ctRatePolicingCompliances OBJECT IDENTIFIER ::= { ctRatePolicingConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
ctRatePolicingConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ctRatePolicingAdminStatus,
|
|
ctRatePolicingConfigLastChange,
|
|
ctRatePolicingActionsAllowed,
|
|
ctRatePolicingAction,
|
|
ctRatePolicingThreshHold,
|
|
ctRatePolicingPriorityList,
|
|
ctRatePolicingRuleStatus,
|
|
ctRatePolicingActionsTaken,
|
|
ctRatePolicingDirectionsAllowed,
|
|
ctRatePolicingDirection
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing device level control
|
|
and status information for rate policing."
|
|
::= { ctRatePolicingGroups 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
ctRatePolicingCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for devices that support
|
|
rate policing."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS { ctRatePolicingConfigGroup }
|
|
|
|
::= { ctRatePolicingCompliances 1 }
|
|
|
|
END
|