graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/enterasys/CTRON-AppleTalk-ROUTER-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

3339 lines
118 KiB
Text
Raw Permalink Blame History

CTRON-AppleTalk-ROUTER-MIB DEFINITIONS ::= BEGIN
-- ctron-appletalk-router-mib.txt
-- Revision: 1.01.00
-- Part Number:
-- Date: August 11, 1995
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific at Routing Services MIB.
--
-- This module will be extended, as required.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
--
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString, PhysAddress
FROM RFC1213-MIB
nwRouter, nwRtrProtoSuites
FROM ROUTER-OIDS
Counter, TimeTicks, Gauge
FROM RFC1155-SMI;
nwRtrExperimental OBJECT IDENTIFIER ::= { nwRouter 4 }
-- The At Router Group.
nwAtRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 4 }
nwAtMibs OBJECT IDENTIFIER ::= { nwAtRouter 1 }
nwAtComponents OBJECT IDENTIFIER ::= { nwAtRouter 2 }
-- At Router Component Groups
nwAtSystem OBJECT IDENTIFIER ::= { nwAtComponents 1 }
nwAtForwarding OBJECT IDENTIFIER ::= { nwAtComponents 2 }
nwAtTopology OBJECT IDENTIFIER ::= { nwAtComponents 4 }
nwAtFib OBJECT IDENTIFIER ::= { nwAtComponents 5 }
nwAtEndSystems OBJECT IDENTIFIER ::= { nwAtComponents 6 }
nwAtAccessControl OBJECT IDENTIFIER ::= { nwAtComponents 7 }
nwAtFilters OBJECT IDENTIFIER ::= { nwAtComponents 8 }
nwAtRedirector OBJECT IDENTIFIER ::= { nwAtComponents 9 }
nwAtEvent OBJECT IDENTIFIER ::= { nwAtComponents 10 }
nwAtWorkGroup OBJECT IDENTIFIER ::= { nwAtComponents 11 }
nwAtNetDiag OBJECT IDENTIFIER ::= { nwAtComponents 12 }
-- At Router System Groups
nwAtSysConfig OBJECT IDENTIFIER ::= { nwAtSystem 1 }
nwAtSysAdministration OBJECT IDENTIFIER ::= { nwAtSystem 2 }
-- At Router Forwarding Groups
nwAtFwdSystem OBJECT IDENTIFIER ::= { nwAtForwarding 1 }
nwAtFwdInterfaces OBJECT IDENTIFIER ::= { nwAtForwarding 2 }
nwAtFwdCounters OBJECT IDENTIFIER ::= { nwAtFwdSystem 1 }
nwAtFwdIfConfig OBJECT IDENTIFIER ::= { nwAtFwdInterfaces 1 }
nwAtFwdIfCounters OBJECT IDENTIFIER ::= { nwAtFwdInterfaces 2 }
-- At Router Routing Groups
nwAtDistanceVector OBJECT IDENTIFIER ::= { nwAtTopology 1 }
nwAtLinkState OBJECT IDENTIFIER ::= { nwAtTopology 2 }
nwAtProto OBJECT IDENTIFIER ::= { nwAtDistanceVector 1 }
nwAtProtoSystem OBJECT IDENTIFIER ::= { nwAtProto 1 }
nwAtProtoInterface OBJECT IDENTIFIER ::= { nwAtProto 2 }
nwAtProtoConfig OBJECT IDENTIFIER ::= { nwAtProtoSystem 1 }
nwAtProtoCounters OBJECT IDENTIFIER ::= { nwAtProtoSystem 2 }
nwAtProtoIfConfig OBJECT IDENTIFIER ::= { nwAtProtoInterface 1 }
nwAtProtoIfCounters OBJECT IDENTIFIER ::= { nwAtProtoInterface 2 }
-- At Router Host End Systems Groups
nwAtHostsSystem OBJECT IDENTIFIER ::= { nwAtEndSystems 1 }
nwAtHostsInterfaces OBJECT IDENTIFIER ::= { nwAtEndSystems 2 }
nwAtHostsToMedia OBJECT IDENTIFIER ::= { nwAtEndSystems 3 }
-- At Router Access Control Group
-- At Router Filters Group
-- At Router Redirector Group
-- At Router Event Log Group
nwAtEventLogConfig OBJECT IDENTIFIER ::= { nwAtEvent 1 }
nwAtEventLogFilterTable OBJECT IDENTIFIER ::= { nwAtEvent 2 }
nwAtEventLogTable OBJECT IDENTIFIER ::= { nwAtEvent 3 }
-- At Router Work-Group Group
-- AT Network Diagnostic Group
nwAtNetDiagPing OBJECT IDENTIFIER ::= { nwAtNetDiag 1 }
nwAtNetDiagTelnet OBJECT IDENTIFIER ::= { nwAtNetDiag 2 }
nwAtNetDiagOutbound OBJECT IDENTIFIER ::= { nwAtNetDiag 3 }
AtNetworkNumber ::=
-- 2 octets of network number in network byte order
OCTET STRING (SIZE (2))
AtDdpNodeAddress ::=
-- 2 octets of net number in network byte order,
-- 1 octet of node number
OCTET STRING (SIZE (3))
AtName ::=
-- 0 to 32 octets of
-- AppleTalk ASCII [10]
OCTET STRING (SIZE (0..32))
-- At MIB Group
-- This group contains information about the revision level of this
-- MIB within the device. It allows verification of the released
-- version without having to read other objects.
nwAtMibRevText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the Cabletron at
Routing Services MIB in textual format."
::= { nwAtMibs 1 }
-- At Router System Group
-- This group contains the objects that pertain to the at routing
-- services at a global, device-wide level.
-- At System Configuration Group
-- This group contains the objects that pertain to the setup and
-- configuration of the At routing services at a global,
-- device-wide level.
nwAtSysRouterId OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The AppleTalk node address used to uniquely identify the
host (device) running the AppleTalk Routing Services. The
value of nwAtSysRouterId is equal to the highest AppleTalk
node address assigned to any router port."
::= { nwAtSysConfig 1 }
-- At System Administration Group
-- This group contains the objects that pertain to the administration of
-- At routing services at a global, device-wide level.
nwAtSysAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- shutdown the router
enabled(3) -- startup the router
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of AppleTalk Routing
Services system wide. Enabled (3) causes AppleTalk Routing
Services to become active on all router ports configured
and enabled for AppleTalk Routing Services. Disabled (2)
causes AppleTalk Routing Services to become inactive
system-wide."
::= { nwAtSysAdministration 1 }
nwAtSysOperSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the operating condition of AppleTalk Routing
Services system- wide. The value of nwAtSysOperStatus
indicates any problem with your AppleTalk Routing Services
configuration. A value of 6 indicates that regardless of
the value of nwAtSysAdminStatus, AppleTalk Routing
Services is not operating because of an invalid
configuration."
::= { nwAtSysAdministration 2 }
nwAtSysAdminReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets AppleTalk Routing Services system-wide. Reset (2)
forces a restart of AppleTalk Routing Services without a
graceful shutdown on any active router ports and without
affecting any other routing services."
::= { nwAtSysAdministration 3 }
nwAtSysOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that nwAtSysOperStatus has been in its current state."
::= { nwAtSysAdministration 4 }
nwAtSysVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the AppleTalk
Routing Services firmware, in textual format."
::= { nwAtSysAdministration 5 }
-- at Forwarding Group
-- This group contains the managed objects used to setup and configure
-- the at router ports for packet forwarding as well as the aggregate
-- and per-interface at packet forwarding counters.
-- at System-wide Packet Forwarding Counters
-- This group contains the aggregate (device-wide) at packet forwarding
-- counters. The byte counters include bytes for the network layer on
-- up, framing is not included.
nwAtFwdCtrAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the aggregate
(system-wide) AppleTalk packet and byte counters.
Enabled (3) causes these counters to become active.
Disabled (2) causes these counters to become inactive."
::= { nwAtFwdCounters 1 }
nwAtFwdCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset(2) resets the aggregate (system-wide) AppleTalk
packet and byte counters. Reset (2) resets the AppleTalk
aggregate counters to 0.nwAtFwdCtrOperationalTime is also
reset to 0."
::= { nwAtFwdCounters 2 }
nwAtFwdCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that nwAtFwdCtrAdminStatus has been in the current state."
::= { nwAtFwdCounters 3 }
nwAtFwdCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been received, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 4 }
nwAtFwdCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been transmitted, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 5 }
nwAtFwdCtrFwdPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been forwarded, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 6 }
nwAtFwdCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been administratively filtered, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 7 }
nwAtFwdCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 8 }
nwAtFwdCtrAddrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded, system-wide, during
nwAtFwdCtrOperationalTime because of addressing errors
in the AppleTalk header."
::= { nwAtFwdCounters 9 }
nwAtFwdCtrLenErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded, system-wide, during
nwAtFwdCtrOperationalTime, because an invalid packet
length is contained in the AppleTalk header."
::= { nwAtFwdCounters 10 }
nwAtFwdCtrHdrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of at packets that have been
discarded, device-wide, during nwAtFwdCtrOperationalTime,
because of an invalid at header."
::= { nwAtFwdCounters 11 }
nwAtFwdCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been received, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 12 }
nwAtFwdCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been transmitted, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 13 }
nwAtFwdCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been forwarded, system-wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 14 }
nwAtFwdCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been administratively filtered,
system-wide, during nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 15 }
nwAtFwdCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been discarded, system wide, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 16 }
nwAtFwdCtrHostInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been successfully delivered to the local host,
during nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 17 }
nwAtFwdCtrHostOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been transmitted by the local host, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 18 }
nwAtFwdCtrHostDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded by the local host, during
nwAtFwdCtrOperationalTiime, due to a lack of host
resources."
::= { nwAtFwdCounters 19 }
nwAtFwdCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been received by the local host, during
nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 20 }
nwAtFwdCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been transmitted by the local host,
during nwAtFwdCtrOperationalTime."
::= { nwAtFwdCounters 21 }
nwAtFwdCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been discarded by the local host,
during nwAtFwdCtrOperationalTime, due to a lack of host
resources."
::= { nwAtFwdCounters 22 }
-- at Forwarding Interface Table
-- This table contains the managed objects used to set-up and configure
-- each router port.
nwAtFwdIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtFwdIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port.
This table is indexed by nwAtFwdIfIndex, which indicates
the value of MIB 2 ifindex, which identifies the router
port for which each entry exists."
::= { nwAtFwdIfConfig 1 }
nwAtFwdIfEntry OBJECT-TYPE
SYNTAX NwAtFwdIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the AppeTalk Routing Services
configuration for the router port for which the entry
exists."
INDEX { nwAtFwdIfIndex }
::= { nwAtFwdIfTable 1 }
NwAtFwdIfEntry ::=
SEQUENCE {
nwAtFwdIfIndex INTEGER,
nwAtFwdIfAdminSTATUS INTEGER,
nwAtFwdIfOperSTATUS INTEGER,
nwAtFwdIfOperationalTime TimeTicks,
nwAtFwdIfControl INTEGER,
nwAtFwdIfMtu INTEGER,
nwAtFwdIfForwarding INTEGER,
nwAtFwdIfFrameType INTEGER,
nwAtFwdIfAclIdentifier INTEGER,
nwAtFwdIfAclSTATUS INTEGER,
nwAtFwdIfCacheControl INTEGER,
nwAtFwdIfCacheEntries Counter,
nwAtFwdIfCacheHits Counter,
nwAtFwdIfCacheMisses Counter
}
nwAtFwdIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of the MIB 2 ifIndex, which
identifies the router port for which the entry exists."
::= { nwAtFwdIfEntry 1 }
nwAtFwdIfAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of AppleTalk Routing
Services on the router port for which the entry exists.
Enabled (3) causes AppleTalk Routing Services to become
active. Disabled (2) causes it to become inactive."
::= { nwAtFwdIfEntry 2 }
nwAtFwdIfOperSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of AppleTalk
Routing Services on the AppleTalk router port for which
the entry exists. The value of nwAtFwdIfOperStatus
indicates any problem with the configuration of AppleTalk
Routing Services on the router port. A value of 6
indicates that regardless of the state of
nwAtFwdIfAdminStatus AppleTalk Routing Services is not
operating because of an invalid port-level configuration."
::= { nwAtFwdIfEntry 3 }
nwAtFwdIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that nwAtFwdIfOper Status has been in its current state."
::= { nwAtFwdIfEntry 4 }
nwAtFwdIfControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
add(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting this
object has no effect."
::= { nwAtFwdIfEntry 5 }
nwAtFwdIfMtu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Maximum Transmissions Unit (MTU) for
AppleTalk packets on the router port for which the entry
exists. This includes the AppleTalk header and data, but
does not include framing."
::= { nwAtFwdIfEntry 6 }
nwAtFwdIfForwarding OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls forwarding of AppleTalk packets on the
AppleTalk router port for which the entry exists.
Enabled (3) causes AppleTalk packets to be forwarded.
Disabled (2) prevents AppleTalk packets from being
forwarded."
::= { nwAtFwdIfEntry 7 }
nwAtFwdIfFrameType OBJECT-TYPE
SYNTAX INTEGER { -- valid media types
other(1), -- experimental
ethernet(2), -- ethernet
snap(3), -- enet,fddi,and token ring
nativewan(8), -- wan media types
encapenet(9), -- wan media types
encapenetsnap(11), -- wan media types
encapfddisnap(16), -- wan media types
canonical(17) -- special, tbd
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the framing type for AppleTalk packets forwarded on the
router port for which the entry exists. Some frame types are only
valid for specific media types. The comments reflect those valid
media types."
DEFVAL { snap }
::= { nwAtFwdIfEntry 8 }
nwAtFwdIfAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Access Control ID of the access control
list in effect for AppleTalk packets being routed on
the router port for which the entry exists. A value of 0
indicates that no access control list is in effect."
::= { nwAtFwdIfEntry 9 }
nwAtFwdIfAclSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of any access control list
configured for AppleTalk traffic on the router port for
which the entry exists. Enabled (3) applies the access
control list indicated by the value of
nwAtFwdIfAclIdentifier to all AppleTalk traffic being
routed on the port. Disabled (2) prevents the access
control list from being applied."
::= { nwAtFwdIfEntry 10 }
nwAtFwdIfCacheControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls AppleTalk Address caching on the router port
for which the entry exists. When AppleTalk Address
caching is enabled, AppleTalk Addresses used for address
validation, filtering, and forwarding are stored in the
cache. This cache is checked first before doing a full
route table lockup, which speeds up the switching process.
Enabled (3) turns on AppleTalk Address caching.
Disabled (2) turns it off."
::= { nwAtFwdIfEntry 11 }
nwAtFwdIfCacheEntries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of entries in the AppleTalk Address
cache on the router port for which the entry exists."
::= { nwAtFwdIfEntry 12 }
nwAtFwdIfCacheHits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of times entries in the AppleTalk
Address cache have been used to provide the AppleTalk
address required to validate, filter, or forward an
AppleTalk packet on the router port."
::= { nwAtFwdIfEntry 13 }
nwAtFwdIfCacheMisses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of times the AppleTalk Address
required to validate, filter, or forward an AppleTalk
packet on the router port was not found in the AppleTalk
Address cache."
::= { nwAtFwdIfEntry 14 }
-- The at Interface Address Table
-- This table contains the managed object used to setup and configure
-- at addresses on a per router port basis.
nwAtportTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port
configured for AppleTalk Routing Services."
::= { nwAtFwdIfConfig 2 }
nwAtportEntry OBJECT-TYPE
SYNTAX NwAtportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the AppleTalk address information
for the router port for which the entry exists."
INDEX { nwAtportIndex }
::= { nwAtportTable 1 }
NwAtportEntry ::= SEQUENCE {
nwAtportIndex INTEGER,
nwAtportDescr DisplayString,
nwAtportType INTEGER,
nwAtportNetStart AtNetworkNumber,
nwAtportNetEnd AtNetworkNumber,
nwAtportNetAddress AtDdpNodeAddress,
nwAtportSTATUS INTEGER,
nwAtportNetConfig INTEGER,
nwAtportZoneConfig INTEGER,
nwAtportZoneDefault AtName,
nwAtportIfIndex INTEGER,
nwAtportNetFrom AtDdpNodeAddress,
nwAtportZoneFrom AtDdpNodeAddress,
nwAtportInPkts Counter,
nwAtportOutPkts Counter,
nwAtportHome INTEGER,
nwAtportCurrentZone AtName,
nwAtportConflictPhysAddr OCTET STRING
}
nwAtportIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates a unique value for each router port. The value
of nwAtportIndex is an integer between 1 and the total
number of ports configured for AppleTalk Routing
Services."
::= { nwAtportEntry 1 }
nwAtportDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This text string provides a description of the port to
the end-user; it must not contain anything but printable
ASCII characters."
::= { nwAtportEntry 2 }
-- objects throughout the MIB key off of nwAtportType to determine
-- the format of address OCTET STRINGs. The address formats
-- are as follows:
-- localtalk, ethertalk1, ethertalk2, tokentalk, iptalk,
-- fdditalk, smdstalk, arctalk, and virtual take the format of
-- DdpNodeAddress
-- serialPPP: null OCTET STRING
-- serialNonstandard: vendor specific
-- aurp: see AURP MIB to determine format
-- frameRelay: 32 bit DLCI in network byte order
-- (OCTET STRING (SIZE (4)))
-- x25: X121Address (see RFC 1382)
-- ip: IpAddress (see RFC 1155)
-- osi: NSAP (OCTET STRING (SIZE (3..20)))
-- decnetIV: 6 bit area, 10 bit host in network byte order
-- (OCTET STRING (SIZE (2)))
-- arap: ???
-- isdnInThePacketMode: ???
-- nonAppleTalk3Com: based on ifType
-- ipx: 32 bit network number in network byte order followed
-- by datalink address of host
-- arns: 32 bit ARNS header
-- hdlc: DdpNodeAddress or null OCTET STRING
nwAtportType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
localtalk(2),
ethertalk1(3),
ethertalk2(4),
tokentalk(5),
iptalk(6),
serialPPP(7),
serialNonstandard(8),
virtual(9), -- an internal interface
fdditalk(10),
arctalk(11),
smdstalk(12),
aurp(13),
frameRelay(14),
x25(15),
ip(16),
osi(17),
decnetIV(18),
arap(19),
isdnInThePacketMode(20),
nonAppleTalk3Com(21),
ipx(22),
arns(23),
hdlc(24)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of nwArPortType indicates which link-layer
protocol is running immediately below DDP in the protocol
stack on the router port for which the entry exists. The
value of nwAtPortType determines the format of address
octet stings throughout the entire AppleTalk MIB."
::= { nwAtportEntry 3 }
nwAtportNetStart OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The first AppleTalk network address in the network range
configured for the port. If the port is not a native
AppleTalk port, this object will have the value of two
octets of zero. Set this value to the first network
address in the network range configured for the port."
::= { nwAtportEntry 4 }
nwAtportNetEnd OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The last AppleTalk network address in the network range
configured for the port. If the network to which this
AppleTalk port is connected is a non-extended network, or
if it is not a native AppleTalk port, the value for
nwAtportNetEnd will be two octets of zero. Set this value
to the last network address in the network range
configured for the port."
::= { nwAtportEntry 5 }
nwAtportNetAddress OBJECT-TYPE
SYNTAX AtDdpNodeAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The AppleTalk node number configured for the port. This
value may be used as a hint for an initial node number
used during node-finding. If the port is not a native
AppleTalk port, this object shall have the value of
three octets of zero."
::= { nwAtportEntry 6 }
nwAtportSTATUS OBJECT-TYPE
SYNTAX INTEGER {
routing(1), -- this port is fully configured and routing
unconfigured(2),
off(3),
invalid(4),
endNode(5), -- this port is acting as an end node
offDueToConflict(6), -- port is off due to configuration
other(7) -- none of the states defined above
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the current state of the router port's
AppleTalk configuration. If either nwAtportNetConfig or
nwApportZoneConfig are set to (5), conflictAverseSeed,
and either the configured network number range or zone
name seeded by the port conflict with the settings of a
neighbor router, nwApPortStatus will have a value of (6),
offDueToConflict."
::= { nwAtportEntry 7 }
nwAtportNetConfig OBJECT-TYPE
SYNTAX INTEGER {
conflictOrientedSeed(1),
garnered(2),
guessed(3),
unconfigured(4),
conflictAverseSeed(5),
softSeed(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the network configuration type of the port.
If the port is not a native AppleTalk port, this object
will have an unconfigured (4) value."
::= { nwAtportEntry 8 }
nwAtportZoneConfig OBJECT-TYPE
SYNTAX INTEGER {
conflictOrientedSeed(1),
garnered(2),
guessed(3),
unconfigured(4),
conflictAverseSeed(5),
softSeed(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value."
::= { nwAtportEntry 9 }
nwAtportZoneDefault OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the name of the default zone for the port. If
the port only has one zone, that zone is represented
here. If the port is not a native AppleTalk port, this
object will contain an octet string of zero length."
::= { nwAtportEntry 10 }
nwAtportIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifIndex, which identifies
the router port for which the entry exists."
::= { nwAtportEntry 11 }
nwAtportNetFrom OBJECT-TYPE
SYNTAX AtDdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When nwAtportNetConfig is set to garnered (2), this
variable contains the DDP address of the entity from
which the AppleTalk network number was garnered. When
nwAtportNetConfig is set to conflictOrientedSeed (1),
conflictAverseSeed (5), or softSeed (6), this variable
contains the DDP address of an entity which supplied or
confirmed the AppleTalk network number. If
nwAtportNetConfig is set to guessed (3) or
unconfigured (4), or if the AppleTalk Routing
Services-enabled device has not received any network
number confirmation, this object will be set to three
octets of zero."
::= { nwAtportEntry 12 }
nwAtportZoneFrom OBJECT-TYPE
SYNTAX AtDdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When nwAtportZoneConfig is set to garnered (2), this
variable contains the DDP address of the entity from
which the AppleTalk Zone List was garnered. When
nwAtportZoneConfig is set to conflictOrientedSeed (1),
conflictAverseSeed (5), or softSeed (6), this variable
contains the DDP address of an entity which supplied or
confirmed the AppleTalk zone information. If
nwAtportZoneConfig is set to guessed (3) or unconfigured
(4), or if the AppleTalk Routing Services-enabled device
has not received any zone confirmation, this object will
be set to three octets of zero."
::= { nwAtportEntry 13 }
nwAtportInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AppleTalk packets received on the
port."
::= { nwAtportEntry 14 }
nwAtportOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AppleTalk packets transmitted on the
port."
::= { nwAtportEntry 15 }
nwAtportHome OBJECT-TYPE
SYNTAX INTEGER {
home(1),
notHome(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of nwAtportHome indicates whether or not the
AppleTalk Routing Services-enabled device, the routing
entity, is `homed' on the port for which the entry exists.
If the entity is homed on the port, then it could perform
NBP (Name Binding Protocol) registrations for services
that it chooses to advertise."
::= { nwAtportEntry 16 }
-- note that modifications to the following variable do
-- not affect the nbpTable
nwAtportCurrentZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the current zone name for the port. In
general, this is the zone name in which services on the
port will be registered. If the port is not a native
AppleTalk port, this object will contain an octet string
of zero length."
::= { nwAtportEntry 17 }
nwAtportConflictPhysAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the link-layer address of the device which
caused nwAtportStatus to be set to off (3). If this
address is not available, or if nwAtportStatus is not
set to off, this object will be a zero length octet
string."
::= { nwAtportEntry 18 }
-- at Forwarding Interfaces Counter Table
-- This table contains the objects that specify the packet and byte counters
-- for each configured at router port.
nwAtFwdIfCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtFwdIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port
configured and enabled for AppleTalk Routing Services."
::= { nwAtFwdIfCounters 1 }
nwAtFwdIfCtrEntry OBJECT-TYPE
SYNTAX NwAtFwdIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry indicates the current packet and byte count
of AppleTalk packets on the router port for which the
entry exists."
INDEX { nwAtFwdIfCtrIfIndex }
::= { nwAtFwdIfCtrTable 1 }
NwAtFwdIfCtrEntry ::=
SEQUENCE {
nwAtFwdIfCtrIfIndex INTEGER,
nwAtFwdIfCtrAdminSTATUS INTEGER,
nwAtFwdIfCtrReset INTEGER,
nwAtFwdIfCtrOperationalTime TimeTicks,
nwAtFwdIfCtrInPkts Counter,
nwAtFwdIfCtrOutPkts Counter,
nwAtFwdIfCtrFwdPkts Counter,
nwAtFwdIfCtrFilteredPkts Counter,
nwAtFwdIfCtrDiscardPkts Counter,
nwAtFwdIfCtrAddrErrPkts Counter,
nwAtFwdIfCtrLenErrPkts Counter,
nwAtFwdIfCtrHdrErrPkts Counter,
nwAtFwdIfCtrInBytes Counter,
nwAtFwdIfCtrOutBytes Counter,
nwAtFwdIfCtrFwdBytes Counter,
nwAtFwdIfCtrFilteredBytes Counter,
nwAtFwdIfCtrDiscardBytes Counter,
nwAtFwdIfCtrHostInPkts Counter,
nwAtFwdIfCtrHostOutPkts Counter,
nwAtFwdIfCtrHostDiscardPkts Counter,
nwAtFwdIfCtrHostInBytes Counter,
nwAtFwdIfCtrHostOutBytes Counter,
nwAtFwdIfCtrHostDiscardBytes Counter
}
nwAtFwdIfCtrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value MIB 2 ifindex, which identifies
the router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 1 }
nwAtFwdIfCtrAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the per-port AppleTalk
packet and byte counters on the router port for which
the entry exists. Enabled (3) causes these counters to
become active. Disabled (2) causes these counters to
become inactive."
::= { nwAtFwdIfCtrEntry 2 }
nwAtFwdIfCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the per-port AppleTalk packet and byte counters
on the router port for which the entry exists. Reset (2)
resets the counters to 0. nwAtFwdIfCtrOperationalTime is
also reset to 0."
::= { nwAtFwdIfCtrEntry 3 }
nwAtFwdIfCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time, in hundredths of a second,
that nwAtFwdIfCtrAdminStatus has been in the current
state."
::= { nwAtFwdIfCtrEntry 4 }
nwAtFwdIfCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been received, during nwAtFwdIfCtrOperationaltime,
on the router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 5 }
nwAtFwdIfCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been transmitted, during nwAtFwdIfCtrOperationaltime,
on the router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 6 }
nwAtFwdIfCtrFwdPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been forwarded, during nwAtFwdIfCtrOperationaltime,
on the router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 7 }
nwAtFwdIfCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been administratively filtered, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 8 }
nwAtFwdIfCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded (dropped), during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 9 }
nwAtFwdIfCtrAddrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded, because of addressing errors in the
AppleTalk header, during nwAtFwdIfCtrOperationalTime,
on the router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 10 }
nwAtFwdIfCtrLenErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded, because an invalid packet length
was contained in the AppleTalk header, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 11 }
nwAtFwdIfCtrHdrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded, because of an invalid AppleTalk
header, during nwAtFwdIfCtrOperationalTime, on the router
port for which the entry exists."
::= { nwAtFwdIfCtrEntry 12 }
nwAtFwdIfCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been received, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 13 }
nwAtFwdIfCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been transmitted, durin
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 14 }
nwAtFwdIfCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been forwarded, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 15 }
nwAtFwdIfCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been administratively filtered, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 16 }
nwAtFwdIfCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been discarded, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 17 }
nwAtFwdIfCtrHostInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been successfully delivered to the local host during
nwAtFwdIfCtrOperationalTime, that were received on the
router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 18 }
nwAtFwdIfCtrHostOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been transmitted by the local host, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwAtFwdIfCtrEntry 19 }
nwAtFwdIfCtrHostDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that
have been discarded by the local host due to a lack of
host resources during nwAtFwdIfCtrOperationalTime, that
were received on the router port for which the entry
exists."
::= { nwAtFwdIfCtrEntry 20 }
nwAtFwdIfCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been successfully delivered to the
local host, during nwAtFwdIfCtrOperationalTime, that
were received on the router port for which the entry
exists."
::= { nwAtFwdIfCtrEntry 21 }
nwAtFwdIfCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been transmitted by the local host,
during nwAtFwdIfCtrOperationalTime, on the router port
for which the entry exists."
::= { nwAtFwdIfCtrEntry 22 }
nwAtFwdIfCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
packets that have been discarded by the local host, due
to a lack of host resources during
nwAtFwdIfCtrOperationalTime, that were received on the
router port for which the entry exists."
::= { nwAtFwdIfCtrEntry 23 }
-- DistanceVector-based Protocols
-- This group contains the managed objects for the Appletalk Routing Protocol,
-- RTMP DistanceVector based routing.
-- AppleTalk Proto System Configuration Parameters
-- This group contains the objects that pertain to the setup and
-- configuration of the AppleTalk Proto DistanceVector based routing protocol.
nwAtProtoAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- shutdown the router
enabled(3) -- startup the router
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the AppleTalk
distance-vector based routing protocol system-wide.
Enabled (3) causes the routing protocol to become active
on all router ports configured and enabled for AppleTalk
Routing Services. Disabled (2) causes the routing protocol
to become inactive."
::= { nwAtProtoConfig 1 }
nwAtProtoOperSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5) -- start-up in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the
AppleTalk Routing Services distance-vector-based routing
protocol, system-wide. The value of nwAtProtoOperStatus
indicates any problem with the routing protocol
configuration. A value of 6 indicates that regardless of
the value of nwAtProtoAdminStatus, the routing protocol
is not operating because of an invalid configuration."
::= { nwAtProtoConfig 2 }
nwAtProtoAdminReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the routing protocol. Reset (2) forces a
system-wide restart of the protocol without a graceful
shutdown on any active router ports."
::= { nwAtProtoConfig 3 }
nwAtProtoOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that nwAtProtoOperStatus has been in the current state."
::= { nwAtProtoConfig 4 }
nwAtProtoVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the AppleTalk
routing protocol firmware, in textual format."
::= { nwAtProtoConfig 5 }
nwAtProtoStackSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the stack size of the AppleTalk routing
protocol thread. In order for a change of this value to
take effect, the protocol (nwAtProtoAdminReset),
AppleTalk Routing Services (nwAtProtoAdminReset), or the
device running Routing Services must be reset."
::= { nwAtProtoConfig 6 }
nwAtProtoThreadPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the run-time execution priority of the
AppleTalk routing protocol thread. In order for a change
of this value to take effect, the AppleTalk protocol
(nwAtProtoAdminReset), AppleTalk Routing Services
(nwAtProtoAdminReset), or the device running Routing
Services must be reset."
::= { nwAtProtoConfig 7 }
nwAtProtoDatabaseThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the run-time maximum number of entries that
can be held in the AppleTalk routing protocol route
table."
::= { nwAtProtoConfig 8 }
nwAtProtoAgeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the amount of time (in seconds) an inactive entry
will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or aged-out."
::= { nwAtProtoConfig 9 }
nwAtProtoHoldDown OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting this
object has no effect."
::= { nwAtProtoConfig 10 }
-- AppleTalk Routing Protocol System (aggregate) Counters
-- This group contains the aggregate (device-wide) AppleTalk Routing Protocol
-- packet and byte counters.
nwAtProtoCtrAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the aggregate
(system-wide) AppleTalk routing protocol packet and byte
counters. Enabled (3)causes these counters to become
active. Disabled (2) causes these counters to be come
inactive."
::= { nwAtProtoCounters 1 }
nwAtProtoCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the aggregate (system-wide) AppleTalk
distance-vector based routing protocol packet and byte
counters. Reset (2) resets the AppleTalk aggregate
counters to 0. nwAtProtoCtrOperationalTime is also reset
to 0."
::= { nwAtProtoCounters 2 }
nwAtProtoCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundreds of seconds, that
nwAtProtoCtrAdminStatus, has been in the current
administrative state."
::= { nwAtProtoCounters 3 }
nwAtProtoCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk routing protocol
packets that have been received, system-wide, during
nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 4 }
nwAtProtoCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk routing protocol
packets that have been transmitted, system-wide, during
nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 5 }
nwAtProtoCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk routing protocol
packets that have been administratively filtered,
system-wide, during nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 6 }
nwAtProtoCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk routing protocol
packets that have been discarded, system-wide, during
nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 7 }
nwAtProtoCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
routing protocol packets that have been received,
system-wide, during nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 8 }
nwAtProtoCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
routing protocol packets that have been transmitted,
system-wide, during nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 9 }
nwAtProtoCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
routing protocol packets that have been administratively
filtered, system-wide, during
nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 10 }
nwAtProtoCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk
routing protocol packets that have been discarded,
system-wide during nwAtProtoCtrOperationalTime."
::= { nwAtProtoCounters 11 }
-- at Protocol Interface Table
nwAtProtoIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtProtoIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port. Each
entry can contain different values, allowing the routing
protocol configuration to vary from router port to router
port. This table is indexed by nwAtProtoIfIndex, which
indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists."
::= { nwAtProtoIfConfig 1 }
nwAtProtoIfEntry OBJECT-TYPE
SYNTAX NwAtProtoIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the AppleTalk routing protocol
configuration for the router port for which the entry
exists."
INDEX { nwAtProtoIfIndex }
::= { nwAtProtoIfTable 1 }
NwAtProtoIfEntry ::=
SEQUENCE {
nwAtProtoIfIndex INTEGER,
nwAtProtoIfAdminSTATUS INTEGER,
nwAtProtoIfOperSTATUS INTEGER,
nwAtProtoIfOperationalTime TimeTicks,
nwAtProtoIfVersion INTEGER,
nwAtProtoIfAdvertisement INTEGER,
nwAtProtoIfFloodDelay INTEGER,
nwAtProtoIfRequestDelay INTEGER,
nwAtProtoIfPriority INTEGER,
nwAtProtoIfHelloTimer INTEGER,
nwAtProtoIfSplitHorizon INTEGER,
nwAtProtoIfPoisonReverse INTEGER,
nwAtProtoIfSnooping INTEGER,
nwAtProtoIfType INTEGER,
nwAtProtoIfXmitCost INTEGER,
nwAtProtoIfAclIdentifier INTEGER,
nwAtProtoIfAclSTATUS INTEGER
}
nwAtProtoIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists."
::= { nwAtProtoIfEntry 1 }
nwAtProtoIfAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the AppleTalk routing
protocol on the router port for which the entry exists.
Enabled (3) causes the routing protocol to become active
on the router port. Disabled (2) causes it to become
inactive."
DEFVAL { disabled }
::= { nwAtProtoIfEntry 2 }
nwAtProtoIfOperSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5) -- start-up in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the
AppleTalk routing protocol on the router port for which
the entry exists. The value of nwAtProtoIfOperStatus
indicates any problem with your AppleTalk routing
protocol configuration on the router port. A value of 6
indicates that regardless of the value of
nwAtProtoIfAdminStatus, the routing protocol is not
operating on the router port because of an invalid
configuration."
::= { nwAtProtoIfEntry 3 }
nwAtProtoIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundreds of seconds, that
nwAtProtoIfOperStatus has been in the current state."
::= { nwAtProtoIfEntry 4 }
nwAtProtoIfVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the revision level of AppleTalk routing
protocol firmware on the router port for which the entry
exists, in textual format."
::= { nwAtProtoIfEntry 5 }
nwAtProtoIfAdvertisement OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This specifies the periodic interval (in seconds) that the
AppleTalk routing protocol agent will advertise routes on this
DECnet routing port."
DEFVAL { 60 }
::= { nwAtProtoIfEntry 6 }
nwAtProtoIfFloodDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the
Cabletron Routing Services protocol specific MIBs.
Setting this object has no effect"
::= { nwAtProtoIfEntry 7 }
nwAtProtoIfRequestDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol specific MIBs. Setting this
object has no effect."
::= { nwAtProtoIfEntry 8 }
nwAtProtoIfPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the priority of the AppleTalk routing protocol on
the router port for which the entry exists."
::= { nwAtProtoIfEntry 9 }
nwAtProtoIfHelloTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the
Cabletron Routing Services protocol specific MIBs.
Setting this object has no effect."
::= { nwAtProtoIfEntry 10 }
nwAtProtoIfSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the operating condition of Split Horizon on the
router port for which the entry exists. When Split Horizon
is enabled, the AppleTalk routing protocol keeps track of
which router port route information is received on, and
prevents information about a route form being sent back
out the same router port it was received on."
DEFVAL { enabled }
::= { nwAtProtoIfEntry 11 }
nwAtProtoIfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the operating condition of Poison Reverse on the
router port for which the entry exists. When Poison
Reverse is enabled, the AppleTalk routing protocol
advertises any downed routes as unreachable during the
period of time that it must wait before removing the
route from the route table."
DEFVAL { disabled }
::= { nwAtProtoIfEntry 12 }
nwAtProtoIfSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of AppleTalk routing protocol
Snooping on the router port. When AppleTalk routing
protocol Snooping is enabled, the routing protocol
operates in passive mode, so that it receives route
information, builds and maintains a route table, but
does not advertise or send updates on the router port for
which the entry exists."
DEFVAL { disabled }
::= { nwAtProtoIfEntry 13 }
nwAtProtoIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
bma(2),
nbma(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the directly connected network
segment does or does not support broadcast media access.
If broadcast media access is supported, AppleTalk routing
protocol advertisements are sent out one broadcast packet
per port. If broadcast media is not supported, AppleTalk
routing protocol advertisements are sent to each
neighbor."
::= { nwAtProtoIfEntry 14 }
nwAtProtoIfXmitCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the cost of transmitting a packet on the network
segment connected to router port for which the entry
exists."
::= { nwAtProtoIfEntry 15 }
nwAtProtoIfAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Access Control List ID of the access
control list in effect for AppleTalk routing protocol
packets on the router port for which the entry exists. A
value of 0 indicates that there is no access control list
in effect for AppleTalk routing protocol packets on the
router port."
::= { nwAtProtoIfEntry 16 }
nwAtProtoIfAclSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of the access control list
identified by nwAtProtoIfAclIdentifier. Enabled (3)
causes the access control list to be applied to all
AppleTalk routing protocol packet traffic on the router
port for which the entry exists. Disabled (2) prevents
the access control list from being applied."
::= { nwAtProtoIfEntry 17 }
-- AppleTalk Protocol Interface Counters Table
-- This table contains the managed objects for AppleTalk protocols packet and
-- byte counter on a per router port basis.
nwAtProtoIfCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtProtoIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the AppleTalk packet and byte counters for
each router port on this device."
::= { nwAtProtoIfCounters 1 }
nwAtProtoIfCtrEntry OBJECT-TYPE
SYNTAX NwAtProtoIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the DECnet Phase IV packet and byte
counters on a per router port basis."
INDEX { nwAtProtoIfCtrIfIndex }
::= { nwAtProtoIfCtrTable 1 }
NwAtProtoIfCtrEntry ::=
SEQUENCE {
nwAtProtoIfCtrIfIndex INTEGER,
nwAtProtoIfCtrAdminSTATUS INTEGER,
nwAtProtoIfCtrReset INTEGER,
nwAtProtoIfCtrOperationalTime TimeTicks,
nwAtProtoIfCtrInPkts Counter,
nwAtProtoIfCtrOutPkts Counter,
nwAtProtoIfCtrFilteredPkts Counter,
nwAtProtoIfCtrDiscardPkts Counter,
nwAtProtoIfCtrInBytes Counter,
nwAtProtoIfCtrOutBytes Counter,
nwAtProtoIfCtrFilteredBytes Counter,
nwAtProtoIfCtrDiscardBytes Counter
}
nwAtProtoIfCtrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the primary index into the AppleTalk interface counter
table. This number corresponds to the index into the mib2
InterfaceTable which describes the router port for which
the entry exists."
::= { nwAtProtoIfCtrEntry 1 }
nwAtProtoIfCtrAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the AppleTalk packet and byte
counters on the router port for which the entry exists.
enabled(3) causes these counters to become active on the
configured AppleTalk router port. disabled(2) causes these
counters to become inactive on the configured AppleTalk router
port."
::= { nwAtProtoIfCtrEntry 2 }
nwAtProtoIfCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the AppleTalk packet and byte counters on the router
port for which the entry exists. reset (2) resets the
interface-specific counters to 0.
nwAtProtoIfCtrOperationalTime is also reset to 0."
::= { nwAtProtoIfCtrEntry 3 }
nwAtProtoIfCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time (No. of time ticks) that the
interface-specific AppleTalk packet and byte counters have been
active on the router port for which the entry exists."
::= { nwAtProtoIfCtrEntry 4 }
nwAtProtoIfCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that have been
received, on the router port for which the entry exists,
during nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 5 }
nwAtProtoIfCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 6 }
nwAtProtoIfCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that have been
administratively filtered, on the router port for which this
entry exists, during nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 7 }
nwAtProtoIfCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during
nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 8 }
nwAtProtoIfCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 9 }
nwAtProtoIfCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 10 }
nwAtProtoIfCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 11 }
nwAtProtoIfCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for
which the entry exists, during nwAtIfCtrOperationalTime."
::= { nwAtProtoIfCtrEntry 12 }
-- at Forward Information Base (FIB) Group
-- This group contains the managed objects for the forwarding table of the
-- at router.
nwAtFibTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtFibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each route being used
to forward AppleTalk data packets."
::= { nwAtFib 1 }
nwAtFibEntry OBJECT-TYPE
SYNTAX NwAtFibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in the table describes an AppleTalk route
to a particular destination."
INDEX { nwAtFibStartNet }
::= { nwAtFibTable 1 }
NwAtFibEntry ::=
SEQUENCE {
nwAtFibStartNet AtNetworkNumber,
nwAtFibEndNet AtNetworkNumber,
nwAtFibNextHop AtDdpNodeAddress,
nwAtFibNextHopIf INTEGER,
nwAtFibHops INTEGER,
nwAtFibRouteType INTEGER
}
nwAtFibStartNet OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the start of the network range for the route."
::= { nwAtFibEntry 1 }
nwAtFibEndNet OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the end of the network range for the route."
::= { nwAtFibEntry 2 }
nwAtFibNextHop OBJECT-TYPE
SYNTAX AtDdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the full AppleTalk network address of the
next hop router for the route. An address of all zeros
indicates a directly connected net."
::= { nwAtFibEntry 3 }
nwAtFibNextHopIf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies
the router port through which the next hop node exists.
Packets destined for the network specified by the entry
will be forwarded on this router port."
::= { nwAtFibEntry 4 }
nwAtFibHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of hops required to reach the
destination for which the entry exists. It is considered
as metric 1."
::= { nwAtFibEntry 5 }
nwAtFibRouteType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
appleTalk(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of route (Allows for PPP entries
later)."
::= { nwAtFibEntry 6 }
-- at Host End Systems Group
-- This group contains the managed objects which control the use of the
-- Address Resolution Protocol (ARP) for mapping host addresses to physical
-- addresses of each router port ARP cache. Mechanisms are also
-- provided which allow 'snooping' such that all directly connected
-- end systems using ARP can be discovered along with their addresses.
nwAtHostsTimeToLive OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time (in minutes) that an entry
can remain in the AARP cache."
::= { nwAtHostsSystem 1 }
nwAtHostsRetryCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of times AppleTalk Routing
Services will retry each attempt to resolve a host
address."
::= { nwAtHostsSystem 2 }
-- at Host Interfaces Table
-- This table contains the objects that specify the control information for
-- maintaining the ARP cache (at Net-to-Media Table).
nwAtHostCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtHostCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the control information for
maintaining an AARP cache on each router port. Note that
the cache entries are maintained by theAppleTalk Address
Resolution Protocol Table of the AppleTalk MIB."
::= { nwAtHostsInterfaces 1 }
nwAtHostCtlEntry OBJECT-TYPE
SYNTAX NwAtHostCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the control information for the ARP
cache on the router port indicated by the value
nwAtHostCtlIfIndex."
INDEX { nwAtHostCtlIfIndex }
::= { nwAtHostCtlTable 1 }
NwAtHostCtlEntry ::=
SEQUENCE {
nwAtHostCtlIfIndex INTEGER,
nwAtHostCtlAdminSTATUS INTEGER,
nwAtHostCtlOperSTATUS INTEGER,
nwAtHostCtlOperationalTime TimeTicks,
nwAtHostCtlProtocol INTEGER,
nwAtHostCtlSnooping INTEGER,
nwAtHostCtlProxy INTEGER,
nwAtHostCtlCacheMax INTEGER,
nwAtHostCtlCacheSize INTEGER,
nwAtHostCtlNumStatics Counter,
nwAtHostCtlNumDynamics Counter,
nwAtHostCtlCacheHits Counter,
nwAtHostCtlCacheMisses Counter
}
nwAtHostCtlIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB2 ifindex, which identifies
the router port for which the entry exists."
::= { nwAtHostCtlEntry 1 }
nwAtHostCtlAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the AARP cache on the
router port for which the entry exists. Enabled (3) causes
AARP caching to become active. Disabled (2) causes AARP
caching to perform a graceful shutdown."
::= { nwAtHostCtlEntry 2 }
nwAtHostCtlOperSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5) -- start-up in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the AARP
Table on the router port for which the entry exists."
::= { nwAtHostCtlEntry 3 }
nwAtHostCtlOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time, in hundredths of a second,
that nwAtHostCtlOperStatus has been in the current state."
::= { nwAtHostCtlEntry 4 }
nwAtHostCtlProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of the AARP protocol on the
router port for which the entry exists."
::= { nwAtHostCtlEntry 5 }
nwAtHostCtlSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls AARP Snooping on the router port for which the
entry exists. Given the AARP protocol is enabled,
setting nwAtHostCtlIfSnooping to enabled (3) turns on AARP Snooping.
When AARP Snooping is enabled the source AppleTalk and physical
addresses of all AARP packets received on the router port are added to
the AARP Table."
::= { nwAtHostCtlEntry 6 }
nwAtHostCtlProxy OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting this
object has no effect."
::= { nwAtHostCtlEntry 7 }
nwAtHostCtlCacheMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of entry slots the AARP
cache can consist of. nwAtHostCtlCacheMax cannot be set
to less than 16. Setting this value does not allocate
any memory for the cache."
::= { nwAtHostCtlEntry 8 }
nwAtHostCtlCacheSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the current number of entry slots in the AARP
cache on the router port for which the entry exists. The
cache automatically resizes to accommodate all entries
up to the maximum number of entries set by
nwAtHostCtlCacheMax."
::= { nwAtHostCtlEntry 9 }
nwAtHostCtlNumStatics OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of static entries in the AARP
cache on the router port for which the entry exists.
Static entries remain in the cache until they are
administratively removed."
::= { nwAtHostCtlEntry 10 }
nwAtHostCtlNumDynamics OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of dynamic entries in the AARP
cache on the router port for which the entry exists.
Dynamic entries area added and aged out by the AARP
protocol."
::= { nwAtHostCtlEntry 11 }
nwAtHostCtlCacheHits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of times an entry in the AARP cache
has been used to successfully provide the physical address
required to forward an AppleTalk packet on the router
port for which the entry exists."
::= { nwAtHostCtlEntry 12 }
nwAtHostCtlCacheMisses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of times the physical address
required to forward an AppleTalk packet has not been
found in the AARP cache on the router port for which the
entry exists."
::= { nwAtHostCtlEntry 13 }
-- at Access Control List Table
-- This table contains the managed objects for the Access Control Lists
-- within the at Router. Access Control Lists allow configuration of
-- restricted access to networks and protocols reachable thru the at
-- Router device. Access Control Lists can be defined with these
-- objects and then be independently applied to at forwarding router ports.
nwAtAclValidEntries OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of valid entries that exist in the
Access Control List Table."
::= { nwAtAccessControl 1 }
nwAtAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the Access Control List information
for theAppleTalk protocol. This table contains entries,
each of which allows packet forwarding between
source/destination pairs to be permitted or denied. The
particular list is identified by the access control
list ID. Each list may contain multiple entries ordered
by sequence number. When a particular access control list
is searched, it is searched in sequence number order and
the first match found ends the search. If no match is
found, access defaults to permitted."
::= { nwAtAccessControl 2 }
nwAtAclEntry OBJECT-TYPE
SYNTAX NwAtAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains AppleTalk source/destination access
information."
INDEX { nwAtAclIdentifier, nwAtAclSequence }
::= { nwAtAclTable 1 }
NwAtAclEntry ::=
SEQUENCE {
nwAtAclIdentifier INTEGER,
nwAtAclSequence INTEGER,
nwAtAclPermission INTEGER,
nwAtAclMatches Counter,
nwAtAclDestZone AtName,
nwAtAclSrcZone AtName
}
nwAtAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the primary (major) index into the AppleTalk
access control list table. Essentially, this identifies
the access control list by a unique identifier (at least 1)
and is arbitrarily assigned by the user. All entries that
have the same ID belong to the same access control list."
::= { nwAtAclEntry 1 }
nwAtAclSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the secondary (minor) index into the AppleTalk
access control list table. This number corresponds to a
sequence number used to order multiple entries within the
same access control list."
::= { nwAtAclEntry 2 }
nwAtAclPermission OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
permit(3),
deny(4),
permit-bidirectional(5),
deny-bidirectional(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether access is allowed or denied between
the source and destination address pairs. Note that
source and destination are interchangeable when
bi-directional control is selected. To remove an existing
entry set invalid (2), and it will disappear after
reboot."
::= { nwAtAclEntry 3 }
nwAtAclMatches OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of matches on this entry that
have resulted in the access restriction permit/deny
being applied as part of the forwarding process."
::= { nwAtAclEntry 4 }
nwAtAclDestZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the destination zone name used to compare for
matches on the access control list."
::= { nwAtAclEntry 5 }
nwAtAclSrcZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the source zone to be used to compare for
matches on the access control list."
::= { nwAtAclEntry 6 }
-- AppleTalk Event Group
nwAtEventAdminSTATUS OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of AppleTalk event
logging. Enabled (3) causes the event log to become
active. Disabled (2) causes the event log to become
inactive."
::= { nwAtEventLogConfig 1 }
nwAtEventMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the maximum number of entries allowed in the event
log table. When the number of entries reaches the value
of nwAtEventMaxEntries the first (oldest) entry is deleted
to allow a new entry to be added."
::= { nwAtEventLogConfig 2 }
nwAtEventTraceAll OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled (3) allows logging of all event types on all
router ports from all protocols and components. Disabled
(2) causes the event log filter table to specify which
events to log."
::= { nwAtEventLogConfig 3 }
-- Event Log Filter Table
-- The Event Log Filter Table contains the managed objects used to set-up
-- and configure log entries.
nwAtEventFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each event filter
configured for AppleTalk Routing Service's events."
::= { nwAtEventLogFilterTable 1 }
nwAtEventFilterEntry OBJECT-TYPE
SYNTAX NwAtEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes an event filter which defines a
particular type of event to be logged to the event log.
The value of nwIpEventProtocol indicates the value used
in either the nwRtgProtocolTable or the nwComponentTable
Cabletron Routing Services MIB, which indentifies the
protocol to which the entry exists."
INDEX { nwAtEventFltrProtocol, nwAtEventFltrIfNum }
::= { nwAtEventFilterTable 1 }
NwAtEventFilterEntry ::=
SEQUENCE {
nwAtEventFltrProtocol INTEGER,
nwAtEventFltrIfNum INTEGER,
nwAtEventFltrControl INTEGER,
nwAtEventFltrType INTEGER,
nwAtEventFltrSeverity INTEGER,
nwAtEventFltrAction INTEGER
}
nwAtEventFltrProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of the Cabletron Routing Services
MIB nwRtgProtocolInstance or nwComponentRtgInstance,
which identifies the protocol involved in the event for
which the event filter exists."
::= { nwAtEventFilterEntry 1 }
nwAtEventFltrIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the router port involved in the event for
which the event filter exists."
::= { nwAtEventFilterEntry 2 }
nwAtEventFltrControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2),
add(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this value to 3 to add the entry to the event log
table. Set this value to 2 to remove the entry from the
event filter table."
::= { nwAtEventFilterEntry 3 }
nwAtEventFltrType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
error(32)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This 6 bit mask specifies the types of events to be
logged. By default all 6 bits are set to 1, indicating
that all types of events are to be logged. Setting any bit
to 0 removes an event type from this field and prevents
that type of event from being logged. Setting any bit to 1
adds an event type to this field and enables that type of
event to be logged. "
::= { nwAtEventFilterEntry 4 }
nwAtEventFltrSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the level of severity an event must meet in
order to be logged. Controls the amount of event logging
by ignoring events of a lower priority than specified by
this filter value. `Highmed' ignores only events of the
lowest severity. `Highlow' logs all events highest priority
through lowest. `Highest' severity causes all events
except those of the highest severity to be ignored.
`Highmed' severity is the default setting which causes
only events of the lowest severity to be ignored.
`Highlow' severity logs all events, regardless of
severity."
::= { nwAtEventFilterEntry 5 }
nwAtEventFltrAction OBJECT-TYPE
SYNTAX INTEGER {
log(1),
trap(2),
log-trap(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies how the events are to be logged. Logging to
the `log' stores the events in the event log table
(nwIpEventFltrAction). Logging to `trap' sends events
out through the trap mechanism."
::= { nwAtEventFilterEntry 6 }
-- Event Log Table
-- The Event Log Table contains the logged events.
nwAtEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each event that has
been logged."
::= { nwAtEventLogTable 1 }
nwAtEventEntry OBJECT-TYPE
SYNTAX NwAtEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the information about an event that
has been logged to the event table."
INDEX { nwAtEventNumber }
::= { nwAtEventTable 1 }
NwAtEventEntry ::=
SEQUENCE {
nwAtEventNumber INTEGER,
nwAtEventTime TimeTicks,
nwAtEventType INTEGER,
nwAtEventSeverity INTEGER,
nwAtEventProtocol INTEGER,
nwAtEventIfNum INTEGER,
nwAtEventTextString OCTET STRING
}
nwAtEventNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ordinal value assigned to the event for which the
log entry exists. nwAtEvnetNumber is assigned so that
each event in the event log can be uniquely identified by
the value of nwAtEventNumber."
::= { nwAtEventEntry 1 }
nwAtEventTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time at which the event was logged to the
event log"
::= { nwAtEventEntry 2 }
nwAtEventType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
error(32)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of event that was logged."
::= { nwAtEventEntry 3 }
nwAtEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the severity that was assigned to this event."
::= { nwAtEventEntry 4 }
nwAtEventProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of the Cabletron Routing Services
MIB nwRtgProtocolInstance or nwComponentInstance which
identifies the protocol or component that was involved in
the event."
::= { nwAtEventEntry 5 }
nwAtEventIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the router port that was involved in the
event."
::= { nwAtEventEntry 6 }
nwAtEventTextString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the actual text string that was logged."
::= { nwAtEventEntry 7 }
-- AppleTalk Outbound Diagnostics Group
nwAtNetDiagOutboundNetAddress OBJECT-TYPE
SYNTAX AtDdpNodeAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The AppleTalk Network Address of a node with which the
diagnostic test will directly correspond."
::= { nwAtNetDiagOutbound 1 }
nwAtNetDiagOutboundPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An integer representing the port through which the
diagnostic test will broadcast or multicast packets."
::= { nwAtNetDiagOutbound 2 }
nwAtNetDiagOutboundTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An integer representing the number of seconds before a
diagnostic request will time out."
::= { nwAtNetDiagOutbound 3 }
nwAtNetDiagOutboundRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An integer representing the number of times a request
will be repeated before failure."
::= { nwAtNetDiagOutbound 4 }
nwAtNetDiagOutboundATEchoType OBJECT-TYPE
SYNTAX INTEGER {
noAction(1),
sendEchoRequest(2),
other(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of echo diagnostic function to initiate. Upon
setting this to send EchoRequest (2), an echo request
will be initiated and the value will be set to noAction
(1)."
::= { nwAtNetDiagOutbound 5 }
nwAtNetDiagOutboundATEchoStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
inProgress(2),
timeout(3),
success(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current status of the echo diagnostic."
::= { nwAtNetDiagOutbound 6 }
nwAtNetDiagOutboundNBPEntityObject OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity object or wildcard object used in the
NBP lookup diagnostic."
::= { nwAtNetDiagOutbound 7 }
nwAtNetDiagOutboundNBPEntityType OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity type or wildcard type used in the
NBP lookup diagnostic."
::= { nwAtNetDiagOutbound 8 }
nwAtNetDiagOutboundNBPEntityZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity zone used in the NBP lookup diagnostic."
::= { nwAtNetDiagOutbound 9 }
nwAtNetDiagOutboundNBPType OBJECT-TYPE
SYNTAX INTEGER {
noAction(1),
localRequest(2),
lookupMcast(3),
lookupBcast(4),
lookupDirect(5),
bcastRequestBcast(6),
bcastRequestDirect(7),
forwardRequestBcast(8),
forwardRequestDirect(9),
other(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of outbound NBP diagnostic function
to initiate. Upon setting this value to any value other
than noAction (1) or other (10), the corresponding request
will be made and the value will be set to noAction (1)."
::= { nwAtNetDiagOutbound 10 }
nwAtNetDiagOutboundNBPStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
inProgress(2),
done(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the current status of the outbound NBP
diagnostic."
::= { nwAtNetDiagOutbound 11 }
nwAtNetDiagOutboundRTMPType OBJECT-TYPE
SYNTAX INTEGER {
noAction(1),
sendRequest(2),
bcastRequest(3),
sendRDRequestSplitHorizon(4),
bcastRDRequestSplitHorizon(5),
sendRDRequestFullTable(6),
bcastRDRequestFullTable(7),
other(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of outbound RTMP diagnostic function to initiate.
Upon setting this value to a value other than noAction(1)
or other(8), the corresponding request will be initiated
and the value will be set to noAction(1)."
::= { nwAtNetDiagOutbound 12 }
nwAtNetDiagOutboundRTMPStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
inProgress(2),
done(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current status of the outbound RTMP diagnostic."
::= { nwAtNetDiagOutbound 13 }
nwAtNetDiagOutboundRTMPNetStart OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The start of the network range from the last successful
outbound RTMP request or route data request."
::= { nwAtNetDiagOutbound 14 }
nwAtNetDiagOutboundRTMPNetEnd OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The end of the network range from the last successful
outbound RTMP request or route data request."
::= { nwAtNetDiagOutbound 15 }
nwAtNetDiagOutboundZIPType OBJECT-TYPE
SYNTAX INTEGER {
noAction(1),
sendQuery(2),
bcastQuery(3),
sendGetZonesList(4),
sendGetLocalZones(5),
sendGetMyZone(6),
sendGetNetInfo(7),
bcastGetNetInfo(8),
other(9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of outbound ZIP diagnostic function to initiate.
Upon setting this value to a value other than noAction(1)
or other(8), the corresponding request will be initiated
and the value will be set to noAction(1)."
::= { nwAtNetDiagOutbound 16 }
nwAtNetDiagOutboundZIPStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
queryInProgress(2),
atpInProgress(3),
gniInProgress(4),
done(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current status of the outbound ZIP diagnostic."
::= { nwAtNetDiagOutbound 17 }
nwAtNetDiagOutboundZIPQueryNet OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The start of the network range to send ZIP query for."
::= { nwAtNetDiagOutbound 18 }
nwAtNetDiagOutboundZIPQueryZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The first zone from the last successful ZIP query."
::= { nwAtNetDiagOutbound 19 }
nwAtNetDiagOutboundZIPGetNetInfoZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The zone name to be used in a ZIP get-net-info request
diagnostic."
::= { nwAtNetDiagOutbound 20 }
nwAtNetDiagOutboundZIPGetNetInfoNetStart OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The start of the network range from the last successful
ZIP get-net-info request."
::= { nwAtNetDiagOutbound 21 }
nwAtNetDiagOutboundZIPGetNetInfoNetEnd OBJECT-TYPE
SYNTAX AtNetworkNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The end of the network range from the last successful
ZIP get-net-info request."
::= { nwAtNetDiagOutbound 22 }
nwAtNetDiagOutboundZIPGetNetInfoMulticast OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The data-link multicast address from the last successful
ZIP get-net-info request."
::= { nwAtNetDiagOutbound 23 }
nwAtNetDiagOutboundZIPGetNetInfoDefaultZone OBJECT-TYPE
SYNTAX AtName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default zone name from the last successful
ZIP get-net-info request."
::= { nwAtNetDiagOutbound 24 }
-- AppleTalk Experimental Branch
-- The AppleTalk zone table has been placed under the
-- experimental branch because it is based on the appletalk
-- draft mib and shall be deprecated when the draft mib
-- becomes a standard.
-- The atportZoneTable stores information about the zones
-- associated with each port. The default zone for each
-- port is stored in the port's atportZoneDefault variable;
-- all other zones for the port are listed in this table.
-- If a port only has one zone, it should be stored in the
-- port's atportZoneDefault variable, and this table should
-- be empty.
nwAtportZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtportZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of zone information for non-default
zones on ports."
::= { nwRtrExperimental 1 }
nwAtportZoneEntry OBJECT-TYPE
SYNTAX NwAtportZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of zone information for a port."
INDEX { nwAtportZonePort, nwAtportZoneName }
::= { nwAtportZoneTable 1 }
NwAtportZoneEntry ::= SEQUENCE {
nwAtportZonePort INTEGER,
nwAtportZoneName AtName,
nwAtportZoneStatus INTEGER
}
nwAtportZonePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An integer representing the port to which this zone belongs.
The port identified by a particular value of this object
is the same port as identified by the same value of
nwAtportIndex."
::= { nwAtportZoneEntry 1 }
nwAtportZoneName OBJECT-TYPE
SYNTAX AtName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A zone name configured for the AppleTalk port referred to in
the corresponding entry of nwAtportZonePort.
When this value is changed in a router, the router must
send a zipNotify packet on the associated network."
::= { nwAtportZoneEntry 2 }
nwAtportZoneStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this zone entry.
Setting this object to the value invalid(2) has the
effect of invalidating the corresponding entry in the
nwAtportZoneTable. That is, it effectively disassociates
the mapping identified with said entry. It is an
implementation-specific matter as to whether the agent
removes an invalidated entry from the table.
Accordingly, management stations must be prepared to
receive from agents tabular information corresponding
to entries not currently in use. Proper
interpretation of such entries requires examination
of the relevant nwAtportZoneStatus object."
::= { nwAtportZoneEntry 3 }
--
-- IP Hosts-to-Media Table
-- This table serves to supplement the MIB-2 Net-To-Media Table. It
-- supports both non-WAN interfaces and logical WAN interfaces and the
-- circuits under them. In addition to the ifIndex, AtNetworkNumber, and
-- PhysAddress mapping, each address translation includes the framing
-- required to converse with the host, the platform's logical port number,
-- and the circuit identifier associated with the mapping if applicable.
nwAtHostMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAtHostMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Ip Address translation table used for mapping an IP
address to physical address, framing, port and circuit
identifier, if applicable."
::= { nwAtHostsToMedia 1 }
nwAtHostMapEntry OBJECT-TYPE
SYNTAX NwAtHostMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains one AtNetworkNumber to 'physical'
address equivalence, including a circuit identifier
if applicable. Also provided is the framing and
port number required to converse with this host."
INDEX { nwAtHostMapIfIndex, nwAtHostMapAtAddr }
::= { nwAtHostMapTable 1 }
NwAtHostMapEntry ::=
SEQUENCE {
nwAtHostMapIfIndex INTEGER,
nwAtHostMapAtAddr AtDdpNodeAddress,
nwAtHostMapPhysAddr PhysAddress,
nwAtHostMapType INTEGER,
nwAtHostMapCircuitID INTEGER,
nwAtHostMapFraming INTEGER,
nwAtHostMapPortNumber INTEGER
}
nwAtHostMapIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the primary (major) index into the HostMap
table. This number corresponds to the index into the
MIB-2 Interfaces Group which describes the IP router
port for which the entry exists."
::= { nwAtHostMapEntry 1 }
nwAtHostMapAtAddr OBJECT-TYPE
SYNTAX AtDdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The AtDdpNodeAddress corresponding to the
media-dependent 'physical' address and circuit
identifier (if applic)."
::= { nwAtHostMapEntry 2 }
nwAtHostMapPhysAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The media-dependent 'physical' address. The value of
this object is 0 for entries indicating native-wan(8)
framing."
::= { nwAtHostMapEntry 3 }
nwAtHostMapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
dynamic(3),
static(4),
inactive(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the nwAtHostMapTable. That is, it effectively
dissasociates the circuit identified with said
entry from the mapping identified with said entry.
It is an implementation-specific matter as to
whether the agent removes an invalidated entry
from the table. Accordingly, management stations
must be prepared to receive tabular information
from agents that corresponds to entries not
currently in use. Proper interpretation of such
entries requires examination of the relevant
nwAtHostMapType object."
::= { nwAtHostMapEntry 4 }
nwAtHostMapCircuitID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The identifier for the virtual circuit present on the
interface. On an interface configured for Frame Relay,
this number is the DLCI for the IP Address at the end of
the circuit. For non-WAN interfaces, the value of this
object is zero."
::= { nwAtHostMapEntry 5 }
nwAtHostMapFraming OBJECT-TYPE
SYNTAX INTEGER { -- valid media types
other(1), -- experimental
ethernet(2), -- ethernet
snap(3), -- enet,fddi,and token ring
nativewan(8), -- wan media types
encapenet(9), -- wan media types
encapenetsnap(11), -- wan media types
encapfddisnap(16), -- wan media types
canonical(17) -- special, tbd
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the framing type required to converse with the
host for which this entry exists."
::= { nwAtHostMapEntry 6 }
nwAtHostMapPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value for the logical port number. It's value
ranges between 1 and a maximum value which is dependent on
both the number of interfaces in the system and the number
of circuits present on interfaces which are of WAN type."
::= { nwAtHostMapEntry 7 }
END
Reference in a new issue View git blame Copy permalink