Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1415 lines
43 KiB
Text
1415 lines
43 KiB
Text
DKT-FE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
|
|
Counter32 FROM SNMPv2-SMI
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
dkt FROM DKT-MIB;
|
|
|
|
feMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200812170000Z"
|
|
ORGANIZATION "DKT A/S"
|
|
CONTACT-INFO
|
|
"postal: DKT A/S
|
|
Fanoevej 6
|
|
DK-4060 Kirke Saaby
|
|
Denmark
|
|
|
|
email: info@dktcomega.com"
|
|
DESCRIPTION "DKT Fast Ethernet MIB."
|
|
::= { dkt 12 }
|
|
|
|
feSwitchEngine OBJECT IDENTIFIER ::= { feMIB 1 }
|
|
|
|
|
|
feATU OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20480))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps the Address Translation Unit (ATU) Switch table in semi colon format"
|
|
::= { feSwitchEngine 1 }
|
|
|
|
feUnicastDelete
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table."
|
|
::= { feSwitchEngine 2 }
|
|
|
|
feMulticastDelete
|
|
OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Removes a multicast IP address from the Address Translation Unit (ATU) Switch table."
|
|
::= { feSwitchEngine 3 }
|
|
|
|
feIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port"
|
|
::= { feSwitchEngine 4 }
|
|
|
|
feVTU OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..9600))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps the VLAN Table Unit (VTU) Switch table in semi colon format"
|
|
::= { feSwitchEngine 5 }
|
|
|
|
feVLANCreate OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE"
|
|
::= { feSwitchEngine 6 }
|
|
|
|
feVLANDelete OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes a VLAN, input parameter is VLAN VID: 0 - 4095"
|
|
::= { feSwitchEngine 7 }
|
|
|
|
feClearVTU OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table"
|
|
::= { feSwitchEngine 8 }
|
|
|
|
feDumpPIRLBuckets OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dumps a list of the active buckets."
|
|
::= { feSwitchEngine 9 }
|
|
|
|
feDisablePIRLBucket OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Disables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11."
|
|
::= { feSwitchEngine 10 }
|
|
|
|
feVLANProviderMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port."
|
|
::= { feSwitchEngine 11 }
|
|
|
|
fePorts OBJECT IDENTIFIER ::= { feMIB 2 }
|
|
|
|
feCPUPort OBJECT IDENTIFIER ::= { fePorts 1 }
|
|
|
|
feCPUPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 1 }
|
|
|
|
feCPUPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HD"
|
|
::= { feCPUPort 2 }
|
|
|
|
|
|
feCPUPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feCPUPort 3 }
|
|
|
|
|
|
feCPUPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 4 }
|
|
|
|
|
|
feCPUPortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 5 }
|
|
|
|
|
|
feCPUPortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 6 }
|
|
|
|
feCPUPortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feCPUPort 7 }
|
|
|
|
|
|
feCPUPortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feCPUPort 8 }
|
|
|
|
|
|
feCPUPortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feCPUPort 9 }
|
|
|
|
|
|
feCPUPortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 10 }
|
|
|
|
|
|
feCPUPortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 11 }
|
|
|
|
|
|
feCPUPortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feCPUPort 12 }
|
|
|
|
|
|
feCPUPortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feCPUPort 13 }
|
|
|
|
|
|
feCPUPortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feCPUPort 14 }
|
|
|
|
|
|
feCPUPortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feCPUPort 15 }
|
|
|
|
|
|
feCPUPortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feCPUPort 16 }
|
|
|
|
|
|
feCPUPortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 17 }
|
|
|
|
|
|
feCPUPortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feCPUPort 18 }
|
|
|
|
|
|
feCPUPortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feCPUPort 19 }
|
|
|
|
|
|
feCPUPortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feCPUPort 20 }
|
|
|
|
|
|
feCPUPortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feCPUPort 21 }
|
|
|
|
|
|
feCPUPortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feCPUPort 22 }
|
|
|
|
|
|
|
|
|
|
feWANPort OBJECT IDENTIFIER ::= { fePorts 2 }
|
|
|
|
feWANPortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 1 }
|
|
|
|
feWANPortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feWANPort 2 }
|
|
|
|
|
|
feWANPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feWANPort 3 }
|
|
|
|
|
|
feWANPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 4 }
|
|
|
|
|
|
feWANPortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 5 }
|
|
|
|
|
|
feWANPortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 6 }
|
|
|
|
feWANPortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feWANPort 7 }
|
|
|
|
|
|
feWANPortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feWANPort 8 }
|
|
|
|
|
|
feWANPortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feWANPort 9 }
|
|
|
|
|
|
feWANPortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 10 }
|
|
|
|
|
|
feWANPortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 11 }
|
|
|
|
|
|
feWANPortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feWANPort 12 }
|
|
|
|
|
|
feWANPortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feWANPort 13 }
|
|
|
|
|
|
feWANPortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feWANPort 14 }
|
|
|
|
|
|
feWANPortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feWANPort 15 }
|
|
|
|
|
|
feWANPortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feWANPort 16 }
|
|
|
|
|
|
feWANPortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 17 }
|
|
|
|
|
|
feWANPortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feWANPort 18 }
|
|
|
|
|
|
feWANPortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feWANPort 19 }
|
|
|
|
|
|
feWANPortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feWANPort 20 }
|
|
|
|
|
|
feWANPortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feWANPort 21 }
|
|
|
|
|
|
feWANPortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feWANPort 22 }
|
|
|
|
|
|
feWANPortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feWANPort 23 }
|
|
|
|
|
|
feLAN1Port OBJECT IDENTIFIER ::= { fePorts 3 }
|
|
|
|
feLAN1PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 1 }
|
|
|
|
feLAN1PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN1Port 2 }
|
|
|
|
|
|
feLAN1PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN1Port 3 }
|
|
|
|
|
|
feLAN1PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 4 }
|
|
|
|
|
|
feLAN1PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 5 }
|
|
|
|
|
|
feLAN1PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 6 }
|
|
|
|
feLAN1PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN1Port 7 }
|
|
|
|
|
|
feLAN1PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN1Port 8 }
|
|
|
|
|
|
feLAN1PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN1Port 9 }
|
|
|
|
|
|
feLAN1PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 10 }
|
|
|
|
|
|
feLAN1PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 11 }
|
|
|
|
|
|
feLAN1PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN1Port 12 }
|
|
|
|
|
|
feLAN1PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN1Port 13 }
|
|
|
|
|
|
feLAN1PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN1Port 14 }
|
|
|
|
|
|
feLAN1PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN1Port 15 }
|
|
|
|
|
|
feLAN1PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN1Port 16 }
|
|
|
|
|
|
feLAN1PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 17 }
|
|
|
|
|
|
feLAN1PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN1Port 18 }
|
|
|
|
|
|
feLAN1PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN1Port 19 }
|
|
|
|
|
|
feLAN1PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN1Port 20 }
|
|
|
|
|
|
feLAN1PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN1Port 21 }
|
|
|
|
|
|
feLAN1PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN1Port 22 }
|
|
|
|
|
|
feLAN1PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN1Port 23 }
|
|
|
|
|
|
|
|
feLAN2Port OBJECT IDENTIFIER ::= { fePorts 4 }
|
|
|
|
feLAN2PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 1 }
|
|
|
|
feLAN2PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN2Port 2 }
|
|
|
|
|
|
feLAN2PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN2Port 3 }
|
|
|
|
|
|
feLAN2PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 4 }
|
|
|
|
|
|
feLAN2PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 5 }
|
|
|
|
|
|
feLAN2PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 6 }
|
|
|
|
feLAN2PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN2Port 7 }
|
|
|
|
|
|
feLAN2PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN2Port 8 }
|
|
|
|
|
|
feLAN2PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN2Port 9 }
|
|
|
|
|
|
feLAN2PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 10 }
|
|
|
|
|
|
feLAN2PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 11 }
|
|
|
|
|
|
feLAN2PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN2Port 12 }
|
|
|
|
|
|
feLAN2PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN2Port 13 }
|
|
|
|
|
|
feLAN2PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN2Port 14 }
|
|
|
|
|
|
feLAN2PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN2Port 15 }
|
|
|
|
|
|
feLAN2PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN2Port 16 }
|
|
|
|
|
|
feLAN2PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 17 }
|
|
|
|
|
|
feLAN2PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN2Port 18 }
|
|
|
|
|
|
feLAN2PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN2Port 19 }
|
|
|
|
|
|
feLAN2PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN2Port 20 }
|
|
|
|
|
|
feLAN2PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN2Port 21 }
|
|
|
|
|
|
feLAN2PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN2Port 22 }
|
|
|
|
|
|
feLAN2PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN2Port 23 }
|
|
|
|
|
|
feLAN3Port OBJECT IDENTIFIER ::= { fePorts 5 }
|
|
|
|
feLAN3PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 1 }
|
|
|
|
feLAN3PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN3Port 2 }
|
|
|
|
|
|
feLAN3PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN3Port 3 }
|
|
|
|
|
|
feLAN3PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 4 }
|
|
|
|
|
|
feLAN3PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 5 }
|
|
|
|
|
|
feLAN3PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 6 }
|
|
|
|
feLAN3PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN3Port 7 }
|
|
|
|
|
|
feLAN3PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN3Port 8 }
|
|
|
|
|
|
feLAN3PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN3Port 9 }
|
|
|
|
|
|
feLAN3PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 10 }
|
|
|
|
|
|
feLAN3PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 11 }
|
|
|
|
|
|
feLAN3PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN3Port 12 }
|
|
|
|
|
|
feLAN3PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN3Port 13 }
|
|
|
|
|
|
feLAN3PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN3Port 14 }
|
|
|
|
|
|
feLAN3PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN3Port 15 }
|
|
|
|
|
|
feLAN3PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN3Port 16 }
|
|
|
|
|
|
feLAN3PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 17 }
|
|
|
|
|
|
feLAN3PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN3Port 18 }
|
|
|
|
|
|
feLAN3PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN3Port 19 }
|
|
|
|
|
|
feLAN3PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN3Port 20 }
|
|
|
|
|
|
feLAN3PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN3Port 21 }
|
|
|
|
|
|
feLAN3PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN3Port 22 }
|
|
|
|
|
|
feLAN3PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN3Port 23 }
|
|
|
|
|
|
feLAN4Port OBJECT IDENTIFIER ::= { fePorts 6 }
|
|
|
|
feLAN4PortAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 1 }
|
|
|
|
feLAN4PortSpeedMode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)"
|
|
::= { feLAN4Port 2 }
|
|
|
|
|
|
feLAN4PortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gets the Link status for the port"
|
|
::= { feLAN4Port 3 }
|
|
|
|
|
|
feLAN4PortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 4 }
|
|
|
|
|
|
feLAN4PortIEEEQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 5 }
|
|
|
|
|
|
feLAN4PortIPQoSPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 6 }
|
|
|
|
feLAN4PortFramePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN4Port 7 }
|
|
|
|
|
|
feLAN4PortQueuePriorityOverwrite OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1."
|
|
::= { feLAN4Port 8 }
|
|
|
|
|
|
feLAN4PortQueuePriority OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 "
|
|
::= { feLAN4Port 9 }
|
|
|
|
|
|
feLAN4PortQoSPortMapRule OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 10 }
|
|
|
|
|
|
feLAN4PortVIDNRLEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 11 }
|
|
|
|
|
|
feLAN4PortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN4Port 12 }
|
|
|
|
|
|
feLAN4PortDeletePortMap2PIRL OBJECT-TYPE
|
|
SYNTAX INTEGER (0..11)
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11."
|
|
::= { feLAN4Port 13 }
|
|
|
|
|
|
feLAN4PortEgressRateLimitation OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the egress limitation rate for the port. Input parameter is value in kbps"
|
|
::= { feLAN4Port 14 }
|
|
|
|
|
|
feLAN4PortIngressRateLimitation OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
|
|
::= { feLAN4Port 15 }
|
|
|
|
|
|
feLAN4PortDefaultVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
|
|
::= { feLAN4Port 16 }
|
|
|
|
|
|
feLAN4PortForceDefaultVID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 17 }
|
|
|
|
|
|
feLAN4PortVLANPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the 802.1Q mode for the ingress port.
|
|
Mode either 0=disable,
|
|
1=fallback,
|
|
2=check,
|
|
3=secure"
|
|
::= { feLAN4Port 18 }
|
|
|
|
|
|
feLAN4PortBlockAllUnknown OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
|
|
::= { feLAN4Port 19 }
|
|
|
|
|
|
feLAN4PortIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
|
|
::= { feLAN4Port 20 }
|
|
|
|
|
|
feLAN4PortAddUnicast OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..100))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
|
|
::= { feLAN4Port 21 }
|
|
|
|
|
|
feLAN4PortAddMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
|
|
::= { feLAN4Port 22}
|
|
|
|
feLAN4PortArpMirroring OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mirror ARP packets seen on the port to the CPU port."
|
|
::= { feLAN4Port 23 }
|
|
|
|
|
|
|
|
|
|
feModuleGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
feSwitchEngine,
|
|
feATU,
|
|
feUnicastDelete,
|
|
feMulticastDelete,
|
|
feIGMPSnooping,
|
|
feVTU,
|
|
feVLANCreate,
|
|
feVLANDelete,
|
|
feClearVTU,
|
|
feDumpPIRLBuckets,
|
|
feDisablePIRLBucket,
|
|
feVLANProviderMode,
|
|
fePorts,
|
|
feCPUPort,
|
|
feCPUPortAutoNegotiation, feCPUPortSpeedMode, feCPUPortLinkStatus, feCPUPortFlowControl, feCPUPortIEEEQoSPriority, feCPUPortIPQoSPriority, feCPUPortFramePriorityOverwrite, feCPUPortQueuePriorityOverwrite, feCPUPortQueuePriority, feCPUPortQoSPortMapRule, feCPUPortVIDNRLEnable, feCPUPortMap2PIRL, feCPUPortDeletePortMap2PIRL, feCPUPortEgressRateLimitation, feCPUPortIngressRateLimitation, feCPUPortDefaultVLAN, feCPUPortForceDefaultVID, feCPUPortVLANPortMode, feCPUPortBlockAllUnknown, feCPUPortIGMPSnooping, feCPUPortAddUnicast, feCPUPortAddMulticast,
|
|
feWANPort,
|
|
feWANPortAutoNegotiation, feWANPortSpeedMode, feWANPortLinkStatus, feWANPortFlowControl, feWANPortIEEEQoSPriority, feWANPortIPQoSPriority, feWANPortFramePriorityOverwrite, feWANPortQueuePriorityOverwrite, feWANPortQueuePriority, feWANPortQoSPortMapRule, feWANPortVIDNRLEnable, feWANPortMap2PIRL, feWANPortDeletePortMap2PIRL, feWANPortEgressRateLimitation, feWANPortIngressRateLimitation, feWANPortDefaultVLAN, feWANPortForceDefaultVID, feWANPortVLANPortMode, feWANPortBlockAllUnknown, feWANPortIGMPSnooping, feWANPortAddUnicast, feWANPortAddMulticast, feWANPortArpMirroring,
|
|
feLAN1Port,
|
|
feLAN1PortAutoNegotiation, feLAN1PortSpeedMode, feLAN1PortLinkStatus, feLAN1PortFlowControl, feLAN1PortIEEEQoSPriority, feLAN1PortIPQoSPriority, feLAN1PortFramePriorityOverwrite, feLAN1PortQueuePriorityOverwrite, feLAN1PortQueuePriority, feLAN1PortQoSPortMapRule, feLAN1PortVIDNRLEnable, feLAN1PortMap2PIRL, feLAN1PortDeletePortMap2PIRL, feLAN1PortEgressRateLimitation, feLAN1PortIngressRateLimitation, feLAN1PortDefaultVLAN, feLAN1PortForceDefaultVID, feLAN1PortVLANPortMode, feLAN1PortBlockAllUnknown, feLAN1PortIGMPSnooping, feLAN1PortAddUnicast, feLAN1PortAddMulticast, feLAN1PortArpMirroring,
|
|
feLAN2Port,
|
|
feLAN2PortAutoNegotiation, feLAN2PortSpeedMode, feLAN2PortLinkStatus, feLAN2PortFlowControl, feLAN2PortIEEEQoSPriority, feLAN2PortIPQoSPriority, feLAN2PortFramePriorityOverwrite, feLAN2PortQueuePriorityOverwrite, feLAN2PortQueuePriority, feLAN2PortQoSPortMapRule, feLAN2PortVIDNRLEnable, feLAN2PortMap2PIRL, feLAN2PortDeletePortMap2PIRL, feLAN2PortEgressRateLimitation, feLAN2PortIngressRateLimitation, feLAN2PortDefaultVLAN, feLAN2PortForceDefaultVID, feLAN2PortVLANPortMode, feLAN2PortBlockAllUnknown, feLAN2PortIGMPSnooping, feLAN2PortAddUnicast, feLAN2PortAddMulticast, feLAN2PortArpMirroring,
|
|
feLAN3Port,
|
|
feLAN3PortAutoNegotiation, feLAN3PortSpeedMode, feLAN3PortLinkStatus, feLAN3PortFlowControl, feLAN3PortIEEEQoSPriority, feLAN3PortIPQoSPriority, feLAN3PortFramePriorityOverwrite, feLAN3PortQueuePriorityOverwrite, feLAN3PortQueuePriority, feLAN3PortQoSPortMapRule, feLAN3PortVIDNRLEnable, feLAN3PortMap2PIRL, feLAN3PortDeletePortMap2PIRL, feLAN3PortEgressRateLimitation, feLAN3PortIngressRateLimitation, feLAN3PortDefaultVLAN, feLAN3PortForceDefaultVID, feLAN3PortVLANPortMode, feLAN3PortBlockAllUnknown, feLAN3PortIGMPSnooping, feLAN3PortAddUnicast, feLAN3PortAddMulticast, feLAN3PortArpMirroring,
|
|
feLAN4Port,
|
|
feLAN4PortAutoNegotiation, feLAN4PortSpeedMode, feLAN4PortLinkStatus, feLAN4PortFlowControl, feLAN4PortIEEEQoSPriority, feLAN4PortIPQoSPriority, feLAN4PortFramePriorityOverwrite, feLAN4PortQueuePriorityOverwrite, feLAN4PortQueuePriority, feLAN4PortQoSPortMapRule, feLAN4PortVIDNRLEnable, feLAN4PortMap2PIRL, feLAN4PortDeletePortMap2PIRL, feLAN4PortEgressRateLimitation, feLAN4PortIngressRateLimitation, feLAN4PortDefaultVLAN, feLAN4PortForceDefaultVID, feLAN4PortVLANPortMode, feLAN4PortBlockAllUnknown, feLAN4PortIGMPSnooping, feLAN4PortAddUnicast, feLAN4PortAddMulticast, feLAN4PortArpMirroring
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00."
|
|
::= { feMIB 4 }
|
|
|
|
|
|
END
|
|
|
|
|
|
|