Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1525 lines
53 KiB
Text
1525 lines
53 KiB
Text
DIFF-SERV-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
rlExperience FROM CISCOSB-MIB
|
|
Unsigned32, Counter32, Counter64,
|
|
OBJECT-TYPE, MODULE-IDENTITY,
|
|
zeroDotZero, mib-2 FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus,
|
|
RowPointer, TestAndIncr FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
-- InetEndpointType, InetEndpoint FROM INET-ENDPOINT-MIB;
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
|
|
|
|
diffServMib MODULE-IDENTITY
|
|
LAST-UPDATED "9907190100Z" -- Mon Jul 19 01:00:00 PDT 1999
|
|
ORGANIZATION "Cisco Systems"
|
|
CONTACT-INFO
|
|
" Fred Baker
|
|
Postal: 519 Lado Drive
|
|
Santa Barbara, California 93111
|
|
Tel: +1 (408)526-4257
|
|
FAX: +1 (805)681-0115
|
|
E-mail: fred@cisco.com
|
|
Kwok Ho Chan
|
|
Postal: 600 Technology Park Drive
|
|
Billerica, Massachusetts 01821, USA
|
|
Tel: +1 (978)288-8175
|
|
E-mail: khchan@nortelnetworks.com
|
|
Andrew Smith
|
|
Postal: 3585 Monroe St.
|
|
Santa Clara, California 95051
|
|
Tel: +1 (408) 579 2821
|
|
FAX: +1 (408) 579 3000
|
|
E-mail: andrew@extremenetworks.com"
|
|
DESCRIPTION
|
|
"This MIB defines the objects necessary to manage a
|
|
device that uses the Differentiated Services
|
|
Architecture described in RFC 2475."
|
|
REVISION "9907190100Z" -- Mon Jul 19 01:00:00 PDT 1999
|
|
DESCRIPTION
|
|
"Initial version, published as RFC xxxx."
|
|
-- ::= { mib-2 12345 } ## anybody who uses this
|
|
-- ## unassigned number
|
|
-- ## deserves the wrath of IANA
|
|
::= { rlExperience 1 }
|
|
|
|
|
|
diffServObjects OBJECT IDENTIFIER ::= { diffServMib 1 }
|
|
diffServTables OBJECT IDENTIFIER ::= { diffServMib 2 }
|
|
diffServMIBConformance OBJECT IDENTIFIER ::= { diffServMib 3 }
|
|
|
|
-- The tools necessary to perform basic Behavior
|
|
-- Aggregate Classification
|
|
--
|
|
Dscp ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The code point used for discriminating a traffic
|
|
stream."
|
|
SYNTAX INTEGER (0..63)
|
|
|
|
diffServAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiffServAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'Aggregate' Table enumerates Behavior Aggregate
|
|
classifiers (DSCPs) that a system may identify traffic
|
|
using."
|
|
::= { diffServTables 1 }
|
|
|
|
diffServAggregateEntry OBJECT-TYPE
|
|
SYNTAX DiffServAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An 'aggregate' entry describes a single BA
|
|
classifier."
|
|
INDEX { diffServAggregateDSCP }
|
|
::= { diffServAggregateTable 1 }
|
|
|
|
DiffServAggregateEntry ::= SEQUENCE {
|
|
diffServAggregateDSCP Dscp
|
|
}
|
|
|
|
diffServAggregateDSCP OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Differentiated Services Code Point (DSCP)
|
|
for the classifier. This object is only meant to be
|
|
pointed to by a RowPointer from other tables, such as
|
|
the diffServClassifierMatchObject, and is not actually
|
|
configured or changed."
|
|
::= { diffServAggregateEntry 1 }
|
|
|
|
-- The tools for MultiField Classification.
|
|
--
|
|
-- This textual convention has no effect on either the syntax
|
|
-- nor the semantics of any managed object. Objects defined
|
|
-- using this convention are always encoded by means of the
|
|
-- rules that define their primitive type.
|
|
--
|
|
MFClassifierL4Port ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value indicating a Layer-4 protocol port number."
|
|
SYNTAX INTEGER (0..65535)
|
|
|
|
-- This object allows a configuring system to obtain a
|
|
-- unique value for diffServClassifierNumber for purposes of
|
|
-- configuration.
|
|
|
|
diffServMFClassifierUnique OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The diffServMFClassifierUnique object yields a
|
|
unique new value for diffServMFClassifierIndex when read and
|
|
subsequently set. This value must be tested for
|
|
uniqueness."
|
|
::= { diffServObjects 1 }
|
|
|
|
diffServMFClassifierTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiffServMFClassifierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of MF (IP 6-tuple multi-field) classifier
|
|
entries that a system may use to identify traffic."
|
|
::= { diffServTables 2 }
|
|
|
|
diffServMFClassifierEntry OBJECT-TYPE
|
|
SYNTAX DiffServMFClassifierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A multi-field classifier entry describes a single MF
|
|
classifier."
|
|
INDEX { diffServMFClassifierIndex }
|
|
::= { diffServMFClassifierTable 1 }
|
|
|
|
DiffServMFClassifierEntry ::= SEQUENCE {
|
|
diffServMFClassifierIndex INTEGER,
|
|
diffServMFClassifierAddrType InetAddressType,
|
|
diffServMFClassifierDstAddr InetAddress,
|
|
diffServMFClassifierDstAddrMask InetAddress,
|
|
diffServMFClassifierSrcAddr InetAddress,
|
|
diffServMFClassifierSrcAddrMask InetAddress,
|
|
diffServMFClassifierDscp INTEGER,
|
|
diffServMFClassifierProtocol INTEGER,
|
|
diffServMFClassifierDstL4PortMin MFClassifierL4Port,
|
|
diffServMFClassifierDstL4PortMax MFClassifierL4Port,
|
|
diffServMFClassifierSrcL4PortMin MFClassifierL4Port,
|
|
diffServMFClassifierSrcL4PortMax MFClassifierL4Port,
|
|
diffServMFClassifierStatus RowStatus
|
|
}
|
|
|
|
diffServMFClassifierIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for the classifier. This object
|
|
is meant to be pointed to by a RowPointer from other
|
|
tables, such as the diffServClassifierMatchObject."
|
|
::= { diffServMFClassifierEntry 1 }
|
|
|
|
diffServMFClassifierAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of IP address used by this classifier entry."
|
|
::= { diffServMFClassifierEntry 2 }
|
|
|
|
diffServMFClassifierDstAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address to match against the packet's
|
|
destination IP address."
|
|
::= { diffServMFClassifierEntry 3 }
|
|
|
|
diffServMFClassifierDstAddrMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mask for the matching of the destination IP address.
|
|
A zero bit in the mask means that the corresponding bit
|
|
in the address always matches."
|
|
::= { diffServMFClassifierEntry 4 }
|
|
|
|
diffServMFClassifierSrcAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address to match against the source IP address
|
|
of each packet."
|
|
::= { diffServMFClassifierEntry 5 }
|
|
|
|
diffServMFClassifierSrcAddrMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mask for the matching of the source IP address."
|
|
::= { diffServMFClassifierEntry 6 }
|
|
|
|
diffServMFClassifierDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (-1 | 0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that the DSCP in the packet must have to
|
|
match this entry. A value of -1 indicates that a
|
|
specific DSCP value has not been defined and thus all
|
|
DSCP values are considered a match."
|
|
::= { diffServMFClassifierEntry 7 }
|
|
|
|
diffServMFClassifierProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP protocol to match against the IPv4 protocol
|
|
number in the packet. A value of zero means match all."
|
|
::= { diffServMFClassifierEntry 8 }
|
|
|
|
diffServMFClassifierDstL4PortMin OBJECT-TYPE
|
|
SYNTAX MFClassifierL4Port
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value that the layer-4 destination port
|
|
number in the packet must have in order to match this
|
|
classifier entry."
|
|
::= { diffServMFClassifierEntry 9 }
|
|
|
|
diffServMFClassifierDstL4PortMax OBJECT-TYPE
|
|
SYNTAX MFClassifierL4Port
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value that the layer-4 destination port
|
|
number in the packet must have in order to match this
|
|
classifier entry. This value must be equal to or
|
|
greater that the value specified for this entry in
|
|
diffServMFClassifierDstL4PortMin."
|
|
::= { diffServMFClassifierEntry 10 }
|
|
|
|
diffServMFClassifierSrcL4PortMin OBJECT-TYPE
|
|
SYNTAX MFClassifierL4Port
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum value that the layer-4 source port number
|
|
in the packet must have in order to match this
|
|
classifier entry."
|
|
::= { diffServMFClassifierEntry 11 }
|
|
|
|
diffServMFClassifierSrcL4PortMax OBJECT-TYPE
|
|
SYNTAX MFClassifierL4Port
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value that the layer-4 source port number
|
|
in the packet must have in oder to match this
|
|
classifier entry. This value must be equal to or
|
|
greater that the value specified for this entry in
|
|
dsSixTupleIpSrcL4PortMin."
|
|
::= { diffServMFClassifierEntry 12 }
|
|
|
|
diffServMFClassifierStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the status of this classifier entry."
|
|
::= { diffServMFClassifierEntry 13 }
|
|
|
|
-- This object allows a configuring system to obtain a
|
|
-- unique value for diffServClassifierNumber for purposes of
|
|
-- configuration
|
|
|
|
diffServClassifierUnique OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The diffServClassifierUnique object yields a unique
|
|
new value for diffServClassifierNumber when read and
|
|
subsequently set. This value must be tested for
|
|
uniqueness."
|
|
::= { diffServObjects 2 }
|
|
|
|
-- The Classifier Table allows us to enumerate the
|
|
-- relationship between arbitrary classifiers and
|
|
-- the meters which apply to classified streams.
|
|
|
|
diffServClassifierTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiffServClassifierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The classifier table enumerates specific classifiers
|
|
that a system may apply, including Differentiated
|
|
Services Code Points (DSCPs) and Multi-field
|
|
discriminators such as {Source IP Address, Destination
|
|
IP Address, IP Protocol, Source TCP/UDP Port,
|
|
Destination TCP/UDP Port)."
|
|
::= { diffServTables 3 }
|
|
|
|
diffServClassifierEntry OBJECT-TYPE
|
|
SYNTAX DiffServClassifierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the classifier table describes a single
|
|
classifier."
|
|
INDEX { ifIndex, diffServInterfaceDirection,
|
|
diffServClassifierNumber }
|
|
::= { diffServClassifierTable 1 }
|
|
|
|
DiffServClassifierEntry ::= SEQUENCE {
|
|
diffServInterfaceDirection INTEGER,
|
|
diffServClassifierNumber INTEGER,
|
|
diffServClassifierMatchObject RowPointer,
|
|
diffServClassifierNext RowPointer,
|
|
diffServClassifierSequence Unsigned32,
|
|
diffServClassifierConfigType INTEGER,
|
|
diffServClassifierConfigTypeInfo OCTET STRING,
|
|
diffServClassifierStatus RowStatus
|
|
}
|
|
|
|
diffServInterfaceDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inbound(1), -- ingress interface
|
|
outbound(2) -- egress interface
|
|
}
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the direction for this entry on the
|
|
interface. 'inbound' traffic is operated on during
|
|
receipt, while 'outbound' traffic is operated on prior
|
|
to transmission."
|
|
::= { diffServClassifierEntry 1 }
|
|
|
|
diffServClassifierNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"diffServClassifierNumber enumerates the classifier
|
|
entry."
|
|
::= { diffServClassifierEntry 2 }
|
|
|
|
diffServClassifierMatchObject OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A pointer to the row that describes the applicable
|
|
classifier. An obvious choice would be the
|
|
diffServAggregateEntry for a given DSCP, but other
|
|
choices include tables describing any classifier that
|
|
may be of interest. If the row pointed to does not
|
|
exist, the classifier is ignored.
|
|
The NULL OID zeroDotZero is interpreted to match
|
|
anything not matched by another classifier."
|
|
DEFVAL { zeroDotZero }
|
|
::= { diffServClassifierEntry 3 }
|
|
|
|
diffServClassifierNext OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'next' variable selects the appropriate meter or
|
|
action to apply to this class of traffic."
|
|
::= { diffServClassifierEntry 4 }
|
|
|
|
diffServClassifierSequence OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence in which classifiers are applied, in
|
|
ascending order. Classifiers with the same sequence
|
|
number must be unambiguous. Classifiers with different
|
|
sequence numbers may overlap in their ranges, with the
|
|
understanding that the first applied classifier to
|
|
match a packet is taken."
|
|
DEFVAL { 0 }
|
|
::= { diffServClassifierEntry 5 }
|
|
|
|
diffServClassifierConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (0),
|
|
mib (1), -- Configured via MIB
|
|
pib (2), -- Configured via PIB
|
|
bgp (3) -- Configured via BGP
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to indicate how the classifer is configured."
|
|
::= { diffServClassifierEntry 6 }
|
|
|
|
diffServClassifierConfigTypeInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional information associated with how the
|
|
classifier is configured."
|
|
::= { diffServClassifierEntry 7 }
|
|
|
|
diffServClassifierStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus variable controls the activation,
|
|
deactivation, or deletion of a classifier. Any writable
|
|
variable may be modified whether the row is active or
|
|
notInService."
|
|
::= { diffServClassifierEntry 8 }
|
|
|
|
-- This object allows a configuring system to obtain a
|
|
-- unique value for diffServClassifierNumber for purposes of
|
|
-- configuration
|
|
|
|
diffServTBMeterUnique OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The diffServTBMeterUnique object yieldiffServ a unique
|
|
new value for diffServTBMeterNumber when read and
|
|
subsequently set. This value must be tested for
|
|
uniqueness."
|
|
::= { diffServObjects 3 }
|
|
|
|
-- The Meter Table allows us to enumerate the
|
|
-- relationship between meters and the actions, other
|
|
-- meters, and queues that result from them.
|
|
|
|
diffServTBMeterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiffServTBMeterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Meter Table enumerates specific token bucket
|
|
meters that a system may use to police a stream of
|
|
classified traffic. Such a stream may include a single
|
|
micro-flow, all traffic from a given source to a given
|
|
destination, all traffic conforming to a single
|
|
classifier, or any other cut of the traffic, including
|
|
all of it.
|
|
Note that the conceptual model requires all traffic to
|
|
pass through one or more meters, and that the last
|
|
meter configured in such a sequence must always
|
|
conform.
|
|
Counters in this table start counting on creation of
|
|
the meter that specifies their existence."
|
|
::= { diffServTables 4 }
|
|
|
|
diffServTBMeterEntry OBJECT-TYPE
|
|
SYNTAX DiffServTBMeterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the meter table describes a single token
|
|
bucket meter. Note that a meter has exactly one rate,
|
|
defined as the burst size each time interval. Multiple
|
|
meters may be cascaded should a multi-rate token bucket
|
|
be needed in a given Per-Hop Behavior. An example of
|
|
such a PHB is AF."
|
|
INDEX { ifIndex, diffServInterfaceDirection,
|
|
diffServTBMeterNumber }
|
|
::= { diffServTBMeterTable 1 }
|
|
|
|
DiffServTBMeterEntry ::= SEQUENCE {
|
|
diffServTBMeterNumber INTEGER,
|
|
diffServTBMeterInterval Unsigned32,
|
|
diffServTBMeterBurstSize Unsigned32,
|
|
diffServTBMeterFailNext RowPointer,
|
|
diffServTBMeterSucceedNext RowPointer,
|
|
diffServTBMeterStatus RowStatus
|
|
}
|
|
|
|
diffServTBMeterNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the meter, for reference from the
|
|
classifier or in cascade from another meter."
|
|
::= { diffServTBMeterEntry 1 }
|
|
|
|
diffServTBMeterInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of microseconds in the token bucket
|
|
interval for this meter. Note that implementations
|
|
frequently do not keep time in microseconds internally,
|
|
so in implementation the effect of this value must be
|
|
approximated."
|
|
::= { diffServTBMeterEntry 2 }
|
|
|
|
diffServTBMeterBurstSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes in a single transmission burst.
|
|
The rate at which the metered traffic may run is one
|
|
burst per interval. Note that if multiple meters are
|
|
cascaded onto one PHB, such as in AF, their intervals
|
|
must be equal, and the peak rate of the data stream is
|
|
the sum of their intervals per interval."
|
|
::= { diffServTBMeterEntry 3 }
|
|
|
|
diffServTBMeterFailNext OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the traffic does not conform to the meter, the next
|
|
meter or action to enquire of."
|
|
::= { diffServTBMeterEntry 4 }
|
|
|
|
diffServTBMeterSucceedNext OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'Succeed Next' pointer selects which action or
|
|
queue on the interface that to be used with the
|
|
message. Incoming traffic may use the value zeroDotZero
|
|
in this variable to indicate that no queuing on receipt
|
|
occurs. Incoming interfaces generally use queuing
|
|
either to divert routing traffic for speedier
|
|
processing during a flap, or for shaping purposes."
|
|
DEFVAL { zeroDotZero }
|
|
::= { diffServTBMeterEntry 5 }
|
|
|
|
diffServTBMeterStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus variable controls the activation,
|
|
deactivation, or deletion of a meter. Any writable
|
|
variable may be modified whether the row is active or
|
|
notInService."
|
|
::= { diffServTBMeterEntry 6 }
|
|
|
|
-- This object allows a configuring system to obtain a
|
|
-- unique value for diffServActionNumber for purposes of
|
|
-- configuration
|
|
|
|
diffServActionUnique OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The diffServActionUnique object yields a unique new
|
|
value for diffServActionNumber when read and
|
|
subsequently set. This value must be tested for
|
|
uniqueness."
|
|
::= { diffServObjects 4 }
|
|
|
|
-- The Meter Table allows us to enumerate the
|
|
-- relationship between meters and the actions, other meters,
|
|
-- and queues that result from them.
|
|
|
|
diffServActionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiffServActionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Action Table enumerates specific apply to a stream
|
|
of classified traffic. Such a stream may include a
|
|
single micro-flow, all traffic from a given source to a
|
|
given destination, all traffic conforming to a single
|
|
classifier, or any other cut of the traffic, including
|
|
all of it.
|
|
Counters in this table start counting on creation of
|
|
the action that specifies their existence."
|
|
::= { diffServTables 5 }
|
|
|
|
diffServActionEntry OBJECT-TYPE
|
|
SYNTAX DiffServActionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the action table describes the actions
|
|
applied to traffic conforming to a given meter."
|
|
INDEX { ifIndex, diffServInterfaceDirection,
|
|
diffServActionNumber }
|
|
::= { diffServActionTable 1 }
|
|
|
|
DiffServActionEntry ::= SEQUENCE {
|
|
diffServActionNumber INTEGER,
|
|
diffServActionNext RowPointer,
|
|
diffServActionDSCP Dscp,
|
|
diffServActionMinThreshold Unsigned32,
|
|
diffServActionMaxThreshold Unsigned32,
|
|
diffServActionDropPolicy INTEGER,
|
|
diffServActionHCConformingPackets Counter64,
|
|
diffServActionConformingPackets Counter32,
|
|
diffServActionHCConformingOctets Counter64,
|
|
diffServActionConformingOctets Counter32,
|
|
diffServActionTailDrops Counter32,
|
|
diffServActionHCTailDrops Counter64,
|
|
diffServActionRandomDrops Counter32,
|
|
diffServActionHCRandomDrops Counter64,
|
|
diffServActionStatus RowStatus
|
|
}
|
|
|
|
diffServActionNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the meter, for reference from the
|
|
classifier or in cascade from another meter."
|
|
::= { diffServActionEntry 1 }
|
|
|
|
diffServActionNext OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'Next' pointer selects which queue or Traffic
|
|
Control Block on the interface. Incoming traffic may
|
|
use the value zeroDotZero in this variable to indicate
|
|
that no queuing on receipt occurs. Incoming interfaces
|
|
generally use queuing either to divert routing traffic
|
|
for speedier processing during a flap, or for shaping
|
|
purposes."
|
|
DEFVAL { zeroDotZero }
|
|
::= { diffServActionEntry 2 }
|
|
|
|
diffServActionDSCP OBJECT-TYPE
|
|
SYNTAX Dscp
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP that traffic conforming to this classifier
|
|
and this meter is remarked with. Note that if the
|
|
classifier is working from the same DSCP value, no
|
|
effective change in the DSCP results.
|
|
Differentiated Services may result in packet remarking
|
|
both on ingress to a network and on egress, and it is
|
|
quite possible that ingress and egress would occur in
|
|
the same router."
|
|
::= { diffServActionEntry 3 }
|
|
|
|
diffServActionMinThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min-threshold is the queue depth that a random
|
|
drop process will seek to manage the queue's depth to.
|
|
This object is in the action table rather than the
|
|
queue table because Differentiated Services PHBs, such
|
|
as the Assured Service, permit differently classified
|
|
traffic to have different drop parameters even though
|
|
they occupy the same queue."
|
|
::= { diffServActionEntry 4 }
|
|
|
|
diffServActionMaxThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "packets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max-threshold is the maximum permissible queue
|
|
depth. In tail drop scenarios, the queue will drop if a
|
|
packet is presented to it and it is instantaneously
|
|
full by this measure. In random drop scenarios, the
|
|
queue will drop if a packet is presented to it and the
|
|
average queue depth exceeds the max-threshold.
|
|
This object is in the action table rather than the
|
|
queue table because Differentiated Services PHBs, such
|
|
as the Assured Service, permit differently classified
|
|
traffic to have different drop parameters even though
|
|
they occupy the same queue."
|
|
::= { diffServActionEntry 5 }
|
|
|
|
diffServActionDropPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
alwaysDrop (2), -- Disallowed traffic
|
|
tailDrop(3), -- Fixed Queue Size
|
|
randomDrop(4) -- RED w/thresholds
|
|
-- per class
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop policy applied to traffic."
|
|
::= { diffServActionEntry 6 }
|
|
|
|
diffServActionHCConformingPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Packets conforming to this meter. This
|
|
object is used on high speed interfaces.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 7 }
|
|
|
|
diffServActionConformingPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Packets conforming to this meter. This
|
|
object may be used on low speed interfaces, and
|
|
represents the least significant 32 bits of
|
|
diffServActionHCConformingPackets.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 8 }
|
|
|
|
diffServActionHCConformingOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets conforming to this meter. This
|
|
object is used on high speed interfaces.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 9 }
|
|
|
|
diffServActionConformingOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets conforming to this meter. This
|
|
object may be used on low speed interfaces, and
|
|
represents the least significant 32 bits of
|
|
diffServActionHCConformingOctets.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 10 }
|
|
|
|
diffServActionTailDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets conforming to this classifier
|
|
and meter that have been dropped because either the
|
|
meter always drops, or the queue's depth exceeds the
|
|
max-threshold value. On high speed devices, this
|
|
object implements the least significant 32 bits of
|
|
diffServActionHCTailDrops .
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 11 }
|
|
|
|
diffServActionHCTailDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets conforming to this classifier
|
|
and meter that have been dropped because either the
|
|
meter always drops, or the queue's depth exceeds the
|
|
max-threshold value. This object should be used on
|
|
high speed interfaces.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 12 }
|
|
|
|
diffServActionRandomDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets conforming to this classifier
|
|
and meter that have been dropped by a random drop
|
|
process because the queue is over-full. On high speed
|
|
lines, this object reflects the least significant 32
|
|
bits of diffServActionHCRandomDrops.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 13 }
|
|
|
|
diffServActionHCRandomDrops OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets conforming to this classifier
|
|
and meter that have been dropped by a random drop
|
|
process because the queue is over-full. This object is
|
|
used on high speed lines.
|
|
Discontinuities in the value of this counter can occur
|
|
at re-initialization of the management system, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime."
|
|
::= { diffServActionEntry 14 }
|
|
|
|
diffServActionStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus variable controls the activation,
|
|
deactivation, or deletion of a meter. Any writable
|
|
variable may be modified whether the row is active or
|
|
notInService."
|
|
::= { diffServActionEntry 15 }
|
|
|
|
-- This object allows a configuring system to obtain a
|
|
-- unique value for diffServQueueNumber for purposes of
|
|
-- configuration
|
|
|
|
diffServQueueUnique OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The diffServQueueUnique object yields a unique new
|
|
value for diffServQueueNumber when read and
|
|
subsequently set. This value must be tested for
|
|
uniqueness."
|
|
::= { diffServObjects 5 }
|
|
|
|
-- The Queue Table allows us to describe queues
|
|
|
|
diffServQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DiffServQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Queue Table enumerates the queues on an interface.
|
|
Queues are used to store traffic during intervals when
|
|
the arrival rate exceeds the departure rate for a class
|
|
of traffic. Because some PHBs indicate that the use of
|
|
a priority queue may be advisable, each queue in this
|
|
system is seen as having a priority. Those queues that
|
|
share the same priority operate in what may externally
|
|
appear to be a Weighted Round Robin manner, and preempt
|
|
the traffic belonging to any lower priority. For this
|
|
reason, it is strongly urged that traffic placed into
|
|
prioritized queues be strongly policed to avoid traffic
|
|
lockout.
|
|
Queues in this table also have a minimum and a maximum
|
|
rate. When a maximum rate is specified, the queue acts
|
|
as a shaper if it has sufficient traffic and capacity
|
|
is available. If it is a minimum rate, then the weight
|
|
in the WRR is effectively set to this rate divided by
|
|
the sum of the rates of queues on the interface,
|
|
guaranteeing it at least that throughput rate. If it is
|
|
a maximum rate, the queue operates as a shaper. A
|
|
shaper potentially reduces the rate of traffic through
|
|
it to the indicated rate, and minimizes variations in
|
|
rate."
|
|
::= { diffServTables 6 }
|
|
|
|
diffServQueueEntry OBJECT-TYPE
|
|
SYNTAX DiffServQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Queue Table describes a single FIFO
|
|
queue."
|
|
INDEX { ifIndex, diffServInterfaceDirection,
|
|
diffServQueueNumber }
|
|
::= { diffServQueueTable 1 }
|
|
|
|
DiffServQueueEntry ::= SEQUENCE {
|
|
diffServQueueNumber INTEGER,
|
|
diffServQueueMinimumRate Unsigned32,
|
|
diffServQueueMaximumRate Unsigned32,
|
|
diffServQueuePriority Unsigned32,
|
|
diffServQueueNextTCB RowPointer,
|
|
diffServQueueOccupancyWeight Unsigned32,
|
|
diffServQueueStatus RowStatus
|
|
}
|
|
|
|
diffServQueueNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the queue."
|
|
::= { diffServQueueEntry 1 }
|
|
|
|
diffServQueueMinimumRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KBPS"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of the queue, in kilobits per second (KBPS).
|
|
This unit is chosen because interfaces exist at the
|
|
time of this writing which exceed the number of bits
|
|
per second which may be represented in a 32 bit number.
|
|
If the value is zero, then there is effectively no
|
|
minimum rate. If the value is non-zero, the queue set
|
|
will seek to assure this class of traffic at least this
|
|
rate."
|
|
::= { diffServQueueEntry 2 }
|
|
|
|
diffServQueueMaximumRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KBPS"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate of the queue, in kilobits per second (KBPS).
|
|
This unit is chosen because interfaces exist at the
|
|
time of this writing which exceed the number of bits
|
|
per second which may be represented in a 32 bit number.
|
|
If the value is zero, then there is effectively no
|
|
maximum rate. If the value is non-zero, the queue set
|
|
will seek to assure this class of traffic at most this
|
|
rate."
|
|
::= { diffServQueueEntry 3 }
|
|
|
|
diffServQueuePriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of the queue. If multiple queues exist on
|
|
the same interface at the same priority, they are
|
|
effectively given Weighted Round Robin service. If
|
|
multiple priorities are configured on an interface,
|
|
traffic with a numerically higher priority number is
|
|
deemed to have higher priority than other traffic, and
|
|
is preemptively serviced."
|
|
::= { diffServQueueEntry 4 }
|
|
|
|
diffServQueueNextTCB OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'Next' pointer selects the successor TCB on the
|
|
interface. Incoming traffic may use the value
|
|
zeroDotZero in this variable to indicate that the
|
|
packet is now to be routed; outbound traffic may use
|
|
the same value to indicate that no subsequent queuing
|
|
applies. Ingress interfaces generally use queuing
|
|
either to divert routing traffic for speedier
|
|
processing during a flap, or for shaping purposes."
|
|
DEFVAL { zeroDotZero }
|
|
::= { diffServQueueEntry 5 }
|
|
|
|
diffServQueueOccupancyWeight OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount, in the form of a factor, that the current,
|
|
actual queue occupancy should influence the averaged
|
|
queue occupancy. The averaged queue occupancy can be
|
|
used for comparison to configured drop thresholds in
|
|
RED or RED-like dropper implementations. Larger the
|
|
weight, the greater the instantaneous queue occupancy
|
|
influences the averaged queue occupancy. Usually,
|
|
dramatic changes in the instantaneous queue occupancy
|
|
is the result of bursty input streams. Notice this
|
|
numeric attribute is divided by 10,000 to get the
|
|
effective fractional factor used in the actual
|
|
calculations."
|
|
::= { diffServQueueEntry 6 }
|
|
|
|
diffServQueueStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus variable controls the activation,
|
|
deactivation, or deletion of a queue. Any writable
|
|
variable may be modified whether the row is active or
|
|
notInService."
|
|
::= { diffServQueueEntry 7 }
|
|
|
|
-- MIB Compliance statements. Three variations of
|
|
-- compliance are described, for optical, LAN, and low speed
|
|
-- interfaces. The difference is the implementation of
|
|
-- diffServActionHCConformingOctets
|
|
-- and diffServActionHCConformingPackets
|
|
|
|
--diffServMIBCompliances OBJECT IDENTIFIER ::= { diffServMIBConformance 1 }
|
|
--diffServMIBGroups OBJECT IDENTIFIER ::= { diffServMIBConformance 2 }
|
|
--
|
|
--diffServMIBCompliance MODULE-COMPLIANCE
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This MIB may be implemented as a read-only or as a
|
|
-- read-create MIB. As a result, it may be used for
|
|
-- monitoring or for configuration.
|
|
-- Standard compliance implies that the implementation
|
|
-- complies for interfaces for which an interface's octet
|
|
-- counter might wrap at most once an hour, which by the
|
|
-- IFMIB's convention applies to interfaces under 20 MBPS.
|
|
-- It thus applies to any device which might implement a
|
|
-- low speed serial line, Ethernet, Token Ring."
|
|
-- MODULE ## This Module
|
|
-- MANDATORY-GROUPS { diffServMIBClassifierGroup, diffServMIBMeterGroup,
|
|
-- diffServMIBQueueGroup, diffServMIBActionGroup
|
|
--
|
|
-- ## note that diffServMIBHCCounterGroup is
|
|
-- ## mandatory for medium and high speed interfaces
|
|
--
|
|
-- ## note that diffServMIBVHCCounterGroup is
|
|
-- ## mandatory for high speed interfaces
|
|
--
|
|
-- ## note that the diffServMIBStaticGroup is
|
|
-- ## mandatory for implementations that implement a
|
|
-- ## read-write or read-create mode.
|
|
-- }
|
|
--
|
|
-- GROUP diffServMIBHCCounterGroup
|
|
-- DESCRIPTION
|
|
-- "This group is mandatory for those network interfaces
|
|
-- for which the value of the corresponding instance of
|
|
-- ifSpeed is greater than 20,000,000 bits/second."
|
|
--
|
|
-- GROUP diffServMIBVHCCounterGroup
|
|
-- DESCRIPTION
|
|
-- "This group is mandatory for those network interfaces
|
|
-- for which the value of the corresponding instance of
|
|
-- ifSpeed is greater than 650,000,000 bits/second."
|
|
--
|
|
-- OBJECT diffServClassifierMatchObject
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierSequence
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterInterval
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterBurstSize
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterFailNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterSucceedNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionDSCP
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionMinThreshold
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionMaxThreshold
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionDropPolicy
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueMinimumRate
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueMaximumRate
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueuePriority
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueNextTCB
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
-- ::= { diffServMIBCompliances 1 }
|
|
--
|
|
--diffServMIBVHCCompliance MODULE-COMPLIANCE
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This MIB may be implemented as a read-only or as a
|
|
-- read-create MIB. As a result, it may be used for
|
|
-- monitoring or for configuration.
|
|
-- Very High Speed compliance implies that the
|
|
-- implementation complies for interfaces for which an
|
|
-- interface's packet or octet counters might wrap more
|
|
-- than once an hour, which by the IFMIB's convention
|
|
-- applies to interfaces over 650 MBPS, or OC-12."
|
|
-- MODULE ## This Module
|
|
-- MANDATORY-GROUPS { diffServMIBClassifierGroup, diffServMIBMeterGroup,
|
|
-- diffServMIBQueueGroup, diffServMIBHCCounterGroup,
|
|
-- diffServMIBVHCCounterGroup, diffServMIBActionGroup
|
|
--
|
|
-- ## note that the diffServMIBStaticGroup is
|
|
-- ## mandatory for implementations that implement a
|
|
-- ## read-write or read-create mode.
|
|
-- }
|
|
--
|
|
--
|
|
-- OBJECT diffServClassifierMatchObject
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierSequence
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterInterval
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterBurstSize
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterFailNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterSucceedNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionDSCP
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionMinThreshold
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionMaxThreshold
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionDropPolicy
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueMinimumRate
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueMaximumRate
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueuePriority
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueNextTCB
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
-- ::= { diffServMIBCompliances 2 }
|
|
--
|
|
--diffServMIBHCCompliance MODULE-COMPLIANCE
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This MIB may be implemented as a read-only or as a
|
|
-- read-create MIB. As a result, it may be used for
|
|
-- monitoring or for configuration.
|
|
-- High Speed compliance implies that the implementation
|
|
-- complies for interfaces for which an interface's octet
|
|
-- counters might wrap more than once an hour, which by
|
|
-- the IFMIB's convention applies to interfaces over 20
|
|
-- MBPS, but under 650 MBPS. It thus applies to devices
|
|
-- which implement a 100 MBPS Ethernet, FDDI, E3, DS3, or
|
|
-- SONET/SDH interface up to OC-12."
|
|
-- MODULE ## This Module
|
|
-- MANDATORY-GROUPS { diffServMIBClassifierGroup, diffServMIBMeterGroup,
|
|
-- diffServMIBQueueGroup, diffServMIBHCCounterGroup,
|
|
-- diffServMIBActionGroup
|
|
--
|
|
-- ## note that diffServMIBVHCCounterGroup is
|
|
-- ## mandatory for high speed interfaces
|
|
--
|
|
-- ## note that the diffServMIBStaticGroup is
|
|
-- ## mandatory for implementations that implement a
|
|
-- ## read-write or read-create mode.
|
|
-- }
|
|
--
|
|
-- GROUP diffServMIBVHCCounterGroup
|
|
-- DESCRIPTION
|
|
-- "This group is mandatory for those network interfaces
|
|
-- for which the value of the corresponding instance of
|
|
-- ifSpeed is greater than 650,000,000 bits/second."
|
|
--
|
|
-- OBJECT diffServClassifierMatchObject
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierSequence
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServClassifierStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterInterval
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterBurstSize
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterFailNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterSucceedNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServTBMeterStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionNext
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionDSCP
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionMinThreshold
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionMaxThreshold
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionDropPolicy
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServActionStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueMinimumRate
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueMaximumRate
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueuePriority
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueNextTCB
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
--
|
|
-- OBJECT diffServQueueStatus
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION
|
|
-- "Write access is not required."
|
|
-- ::= { diffServMIBCompliances 3 }
|
|
--
|
|
--diffServMIBClassifierGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServAggregateDSCP,
|
|
-- diffServClassifierMatchObject,
|
|
-- diffServClassifierNext,
|
|
-- diffServClassifierSequence,
|
|
-- diffServClassifierStatus
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Classifier Group defines the MIB Objects that
|
|
-- describe a classifier."
|
|
-- ::= { diffServMIBGroups 1 }
|
|
--
|
|
--diffServMIBMeterGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServTBMeterInterval, diffServTBMeterBurstSize,
|
|
-- diffServTBMeterSucceedNext, diffServTBMeterFailNext,
|
|
-- diffServTBMeterStatus
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Meter Group defines the objects used in describing
|
|
-- a meter."
|
|
-- ::= { diffServMIBGroups 2 }
|
|
--
|
|
--diffServMIBActionGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServActionDropPolicy,
|
|
-- diffServActionRandomDrops,
|
|
-- diffServActionTailDrops,
|
|
-- diffServActionMinThreshold,
|
|
-- diffServActionMaxThreshold, diffServActionDSCP,
|
|
-- diffServActionNext,
|
|
-- diffServActionConformingPackets,
|
|
-- diffServActionConformingOctets,
|
|
-- diffServActionStatus
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Action Group defines the objects used in
|
|
-- describing an action."
|
|
-- ::= { diffServMIBGroups 3 }
|
|
--
|
|
--diffServMIBHCCounterGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServActionHCConformingOctets
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "At 20,000,000 bits per second or greater, the number
|
|
-- of octets a given class may count can overflow a 32 bit
|
|
-- counter in under an hour. Therefore, by convention
|
|
-- established in the IFMIB, the 64 bit counter must be
|
|
-- implemented as well."
|
|
-- ::= { diffServMIBGroups 4 }
|
|
--
|
|
--diffServMIBVHCCounterGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServActionHCConformingPackets,
|
|
-- diffServActionHCRandomDrops,
|
|
-- diffServActionHCTailDrops
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "At 650,000,000 bits per second or greater, the number
|
|
-- of packets a given class may count can overflow a 32
|
|
-- bit counter in under an hour. Therefore, by convention
|
|
-- established in the IFMIB, the 64 bit counter must be
|
|
-- implemented as well."
|
|
-- ::= { diffServMIBGroups 5 }
|
|
--
|
|
--diffServMIBQueueGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServQueueMinimumRate,
|
|
-- diffServQueueMaximumRate,
|
|
-- diffServQueuePriority, diffServQueueStatus,
|
|
-- diffServQueueNextTCB
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Queue Group contains the objects that describe an
|
|
-- interface's queues."
|
|
-- ::= { diffServMIBGroups 6 }
|
|
--
|
|
--diffServMIBStaticGroup OBJECT-GROUP
|
|
-- OBJECTS { diffServClassifierUnique, diffServTBMeterUnique,
|
|
-- diffServQueueUnique, diffServActionUnique
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Static Group contains scalar objects used in
|
|
-- creating unique enumerations for classifiers, meters,
|
|
-- and queues."
|
|
-- ::= { diffServMIBGroups 7 }
|
|
END
|