Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
334 lines
9.8 KiB
Text
334 lines
9.8 KiB
Text
CISCOSB-MNGINF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB MNGINF ROS
|
|
-- This Private MIB supports the Management ACL for ROS
|
|
-- Version: 7.46
|
|
-- Date: 20 Jan 2007
|
|
|
|
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
OBJECT-TYPE, IpAddress, Unsigned32,
|
|
MODULE-IDENTITY FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString,
|
|
TruthValue, RowStatus FROM SNMPv2-TC
|
|
InetAddressType,InetAddress FROM INET-ADDRESS-MIB; -- RFC2851
|
|
|
|
rlMngInf MODULE-IDENTITY
|
|
LAST-UPDATED "200309210001Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The private MIB module definition for management access control."
|
|
REVISION "200309210000Z"
|
|
DESCRIPTION
|
|
"Changed IMPORTS, added this MODULE-IDENTITY clause and editorial changes."
|
|
::= { switch001 89 }
|
|
|
|
RlMngInfServiceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management ACL Service type"
|
|
SYNTAX INTEGER {
|
|
dontCare(0),
|
|
telnet(1),
|
|
snmp(2),
|
|
http(3),
|
|
https(4),
|
|
ssh(5)
|
|
}
|
|
|
|
RlMngInfActionType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management ACL Action definition."
|
|
SYNTAX INTEGER {
|
|
permit(0),
|
|
deny(1)
|
|
}
|
|
|
|
rlMngInfMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= {rlMngInf 1}
|
|
|
|
rlMngInfEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable specifies if Management ACL functionality is enabled."
|
|
::= {rlMngInf 2}
|
|
|
|
rlMngInfActiveListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The currently activated Management ACL name"
|
|
::= {rlMngInf 3}
|
|
|
|
rlMngInfListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlMngInfListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table specifies all defined Access Lists definitions for IPv4 addresses.
|
|
Provide backward compatibility for previous versions."
|
|
::= {rlMngInf 4}
|
|
|
|
rlMngInfListEntry OBJECT-TYPE
|
|
SYNTAX RlMngInfListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row definition for this table."
|
|
INDEX { rlMngInfListName, rlMngInfListPriority }
|
|
::= { rlMngInfListTable 1}
|
|
|
|
RlMngInfListEntry ::= SEQUENCE {
|
|
rlMngInfListName DisplayString,
|
|
rlMngInfListPriority Unsigned32,
|
|
rlMngInfListIfIndex Unsigned32,
|
|
rlMngInfListIpAddr IpAddress,
|
|
rlMngInfListIpNetMask IpAddress,
|
|
rlMngInfListService RlMngInfServiceType,
|
|
rlMngInfListAction RlMngInfActionType,
|
|
rlMngInfListRowStatus RowStatus,
|
|
rlMngInfListPortIfIndex Unsigned32
|
|
}
|
|
|
|
rlMngInfListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the Access List."
|
|
::= { rlMngInfListEntry 1}
|
|
|
|
rlMngInfListPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Priority value."
|
|
::= { rlMngInfListEntry 2}
|
|
|
|
rlMngInfListIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex value. The IfIndex can be configured to be 0, which means don't care value."
|
|
::= { rlMngInfListEntry 3}
|
|
|
|
rlMngInfListIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address. The IP address can be configured to be 0, which means don't care value."
|
|
::= { rlMngInfListEntry 4}
|
|
|
|
rlMngInfListIpNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask associated with the IP address of this entry. The value of the mask is
|
|
an IP address with all the network bits set to 1 and all the hosts bits set to 0."
|
|
::= { rlMngInfListEntry 5}
|
|
|
|
rlMngInfListService OBJECT-TYPE
|
|
SYNTAX RlMngInfServiceType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service type. The Service type address can be configured to be 0,
|
|
which means any of Telnet, SNMP, HTTP, HTTPS, SSH."
|
|
::= { rlMngInfListEntry 6}
|
|
|
|
rlMngInfListAction OBJECT-TYPE
|
|
SYNTAX RlMngInfActionType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action type. Can be permit or deny."
|
|
::= { rlMngInfListEntry 7}
|
|
|
|
rlMngInfListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { rlMngInfListEntry 8}
|
|
|
|
rlMngInfListPortIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Physical Port IfIndex value. The IfIndex can be configured to be 0, which means don't care value."
|
|
::= { rlMngInfListEntry 9}
|
|
|
|
--- Management Interface auditing control (SysLog)
|
|
|
|
rlMngInfAuditingEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether SysLog messages
|
|
should be issued on reject by rule"
|
|
DEFVAL { true }
|
|
::= { rlMngInf 5 }
|
|
|
|
rlMngInfListInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlMngInfListInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table specifies all defined Access Lists definitions definitions
|
|
for both IPv4 and IPv6 addresses."
|
|
::= {rlMngInf 6}
|
|
|
|
rlMngInfListInetEntry OBJECT-TYPE
|
|
SYNTAX RlMngInfListInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row definition for this table."
|
|
INDEX { rlMngInfListInetName, rlMngInfListInetPriority }
|
|
::= { rlMngInfListInetTable 1}
|
|
|
|
RlMngInfListInetEntry ::= SEQUENCE {
|
|
rlMngInfListInetName DisplayString,
|
|
rlMngInfListInetPriority Unsigned32,
|
|
rlMngInfListInetIfIndex Unsigned32,
|
|
rlMngInfListInetIpAddrType InetAddressType,
|
|
rlMngInfListInetIpAddr InetAddress,
|
|
rlMngInfListInetIpNetMask IpAddress,
|
|
rlMngInfListInetService RlMngInfServiceType,
|
|
rlMngInfListInetAction RlMngInfActionType,
|
|
rlMngInfListInetRowStatus RowStatus,
|
|
rlMngInfListInetIPv6PrefixLength INTEGER,
|
|
rlMngInfListInetPortIfIndex Unsigned32
|
|
}
|
|
|
|
rlMngInfListInetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the Access List."
|
|
::= { rlMngInfListInetEntry 1}
|
|
|
|
rlMngInfListInetPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Priority value."
|
|
::= { rlMngInfListInetEntry 2}
|
|
|
|
rlMngInfListInetIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex value. The IfIndex can be configured to be 0, which means don't care value."
|
|
::= { rlMngInfListInetEntry 3}
|
|
|
|
rlMngInfListInetIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Inet address type."
|
|
::= { rlMngInfListInetEntry 4}
|
|
|
|
rlMngInfListInetIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Inet address.Used for both IPv4 and IPv6 addresses.
|
|
The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 ,
|
|
which means ignored value."
|
|
::= { rlMngInfListInetEntry 5}
|
|
|
|
rlMngInfListInetIpNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field will used in case of IPv4 addresses . For IPv6 this field ignored.
|
|
Default value 255.255.255.255."
|
|
::= { rlMngInfListInetEntry 6}
|
|
|
|
rlMngInfListInetService OBJECT-TYPE
|
|
SYNTAX RlMngInfServiceType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service type. The Service type address can be configured to be 0,
|
|
which means any of Telnet, SNMP, HTTP, HTTPS, SSH."
|
|
::= { rlMngInfListInetEntry 7}
|
|
|
|
rlMngInfListInetAction OBJECT-TYPE
|
|
SYNTAX RlMngInfActionType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action type. Can be permit or deny."
|
|
::= { rlMngInfListInetEntry 8}
|
|
|
|
rlMngInfListInetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to
|
|
row installation and removal conventions."
|
|
::= { rlMngInfListInetEntry 9}
|
|
|
|
rlMngInfListInetIPv6PrefixLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0.. 128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IPv6 prefix length.This field provide IPv6 prefix length (mask)
|
|
for IPv6 only.In case of IPv4 this field will ignored"
|
|
DEFVAL { 128 }
|
|
::= { rlMngInfListInetEntry 10}
|
|
|
|
rlMngInfListInetPortIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Physical Port IfIndex value. The IfIndex can be configured to be 0, which means don't care value."
|
|
::= { rlMngInfListInetEntry 11}
|
|
|
|
rlMngInfDefaultListName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default Management ACL name"
|
|
::= {rlMngInf 7}
|
|
END
|
|
|