graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/cisco/CISCOSB-BRIDGEMIBOBJECTS-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

2876 lines
89 KiB
Text
Raw Permalink Blame History

CISCOSB-BRIDGEMIBOBJECTS-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB ROS
-- Private BRIDGE MIB OBJECTS MIB
-- Version: 9.30
-- Date: 11-Nov-2018
IMPORTS
switch001 FROM CISCOSB-MIB
OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Counter32 FROM SNMPv2-SMI
TruthValue, DisplayString, RowStatus FROM SNMPv2-TC
Counter FROM RFC1155-SMI
BridgeId, Timeout, dot1dBasePort, dot1dStpPort, MacAddress FROM BRIDGE-MIB
InterfaceIndex, ifIndex, InterfaceIndexOrZero FROM IF-MIB
PortList FROM Q-BRIDGE-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
VlanList1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlan 1 through
8, the second octet specifying vlan 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered vlan, and the least significant bit
represents the highest numbered vlan. Thus, each vlan
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that vlan is included in the set of vlans; the vlan
is not included if its bit has a value of '0'.
VlanList1 represent vlans 1-1024"
SYNTAX OCTET STRING (SIZE(0..128))
VlanList2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"As VlanList1 but represent vlans 1025-2048"
SYNTAX OCTET STRING (SIZE(0..128))
VlanList3 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"As VlanList1 but represent vlans 2049-3072"
SYNTAX OCTET STRING (SIZE(0..128))
VlanList4 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"As VlanList1 but represent vlans 3073-4094"
SYNTAX OCTET STRING (SIZE(0..128))
rlpBridgeMIBObjects MODULE-IDENTITY
LAST-UPDATED "200701020001Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"This private MIB module defines bridge MIB objects private MIBs."
REVISION "200701020000Z"
DESCRIPTION
"Initial revision."
::= { switch001 57 }
rldot1dPriority OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 1 }
rldot1dPriorityMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rldot1dPriority 1 }
--
-- rldot1dPriorityPortGroupTable
--
rldot1dPriorityPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dPriorityPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of PortGroupNumber for each port."
::= { rldot1dPriority 2 }
rldot1dPriorityPortGroupEntry OBJECT-TYPE
SYNTAX Rldot1dPriorityPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All ports belonging to a same group have
the same User Priority to Traffic Class mapping."
INDEX { dot1dBasePort }
::= { rldot1dPriorityPortGroupTable 1 }
Rldot1dPriorityPortGroupEntry ::= SEQUENCE {
rldot1dPriorityPortGroupNumber INTEGER
}
rldot1dPriorityPortGroupNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A group, that port belongs to. All ports belonging
to a same group have the same User Priority to
Traffic Class mapping."
::= { rldot1dPriorityPortGroupEntry 1 }
rldot1dStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 2 }
--
-- Scalars
--
rldot1dStpMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 2."
::= { rldot1dStp 1 }
rldot1dStpType OBJECT-TYPE
SYNTAX INTEGER {
perDevice (1),
mstp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the device supports Spanning Tree per device,
or per group."
::= { rldot1dStp 2 }
rldot1dStpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable spanning tree. When working in per vlan mode
enable / disable STP per all vlans."
DEFVAL { true }
::= { rldot1dStp 3 }
rldot1dStpPortMustBelongToVlan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether a port must belong to a VLAN in order
to participate in the STP."
DEFVAL { true }
::= { rldot1dStp 4 }
rldot1dStpExtendedPortNumberFormat OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the STP uses the extended port fnumber format."
DEFVAL { false }
::= { rldot1dStp 5 }
--
-- The Spanning Tree Vlan Table
--
rldot1dStpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vlan-specific information
for the Spanning Tree Protocol."
::= { rldot1dStp 6 }
rldot1dStpVlanEntry OBJECT-TYPE
SYNTAX Rldot1dStpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every Vlan
about the Spanning Tree Protocol state for that
Vlan."
INDEX { rldot1dStpVlan }
::= { rldot1dStpVlanTable 1 }
Rldot1dStpVlanEntry ::= SEQUENCE {
rldot1dStpVlan INTEGER,
rldot1dStpVlanEnable TruthValue,
rldot1dStpTimeSinceTopologyChange TimeTicks,
rldot1dStpTopChanges Counter,
rldot1dStpDesignatedRoot BridgeId,
rldot1dStpRootCost INTEGER,
rldot1dStpRootPort INTEGER,
rldot1dStpMaxAge Timeout,
rldot1dStpHelloTime Timeout,
rldot1dStpHoldTime INTEGER,
rldot1dStpForwardDelay Timeout
}
rldot1dStpVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan index."
::= { rldot1dStpVlanEntry 1 }
rldot1dStpVlanEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether this vlan is STP enable or disable"
REFERENCE
" ?? "
DEFVAL { true }
::= { rldot1dStpVlanEntry 2 }
rldot1dStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1dStpVlanEntry 3 }
rldot1dStpTopChanges OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1dStpVlanEntry 4 }
rldot1dStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { rldot1dStpVlanEntry 5 }
rldot1dStpRootCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { rldot1dStpVlanEntry 6 }
rldot1dStpRootPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { rldot1dStpVlanEntry 7 }
rldot1dStpMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { rldot1dStpVlanEntry 8 }
rldot1dStpHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { rldot1dStpVlanEntry 9 }
rldot1dStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { rldot1dStpVlanEntry 10 }
rldot1dStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { rldot1dStpVlanEntry 11 }
--
-- rldot1dStpVlanPortTable
--
rldot1dStpVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains pair <vlan, port> specific information
for the Spanning Tree Protocol."
::= { rldot1dStp 7 }
rldot1dStpVlanPortEntry OBJECT-TYPE
SYNTAX Rldot1dStpVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every pair <vlan, port>
about the Spanning Tree Protocol state for that pair."
INDEX { rldot1dStpVlanPortVlan, rldot1dStpVlanPortPort }
::= { rldot1dStpVlanPortTable 1 }
Rldot1dStpVlanPortEntry ::= SEQUENCE {
rldot1dStpVlanPortVlan INTEGER,
rldot1dStpVlanPortPort INTEGER,
rldot1dStpVlanPortPriority INTEGER,
rldot1dStpVlanPortState INTEGER,
rldot1dStpVlanPortEnable INTEGER,
rldot1dStpVlanPortPathCost INTEGER,
rldot1dStpVlanPortDesignatedRoot BridgeId,
rldot1dStpVlanPortDesignatedCost INTEGER,
rldot1dStpVlanPortDesignatedBridge BridgeId,
rldot1dStpVlanPortDesignatedPort OCTET STRING,
rldot1dStpVlanPortForwardTransitions Counter
}
rldot1dStpVlanPortVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1s/D2-1999 "
::= { rldot1dStpVlanPortEntry 1 }
rldot1dStpVlanPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1dStpVlanPortEntry 2 }
rldot1dStpVlanPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value
of rldot1dStpVlanPort."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1dStpVlanPortEntry 3 }
rldot1dStpVlanPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1dStpVlanPortEntry 4 }
rldot1dStpVlanPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1dStpVlanPortEntry 5 }
rldot1dStpVlanPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { rldot1dStpVlanPortEntry 6 }
rldot1dStpVlanPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { rldot1dStpVlanPortEntry 7 }
rldot1dStpVlanPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1dStpVlanPortEntry 8 }
rldot1dStpVlanPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { rldot1dStpVlanPortEntry 9 }
rldot1dStpVlanPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { rldot1dStpVlanPortEntry 10 }
rldot1dStpVlanPortForwardTransitions OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { rldot1dStpVlanPortEntry 11 }
--
-- STP Private TRAP variables
--
rldot1dStpTrapVariable OBJECT IDENTIFIER ::= { rldot1dStp 8 }
rldot1dStpTrapVrblifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of port which STP status was changed"
::= { rldot1dStpTrapVariable 1 }
rldot1dStpTrapVrblVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VID of VLAN to which the port belongs which STP status was changed"
::= { rldot1dStpTrapVariable 2 }
rldot1dStpTypeAfterReset OBJECT-TYPE
SYNTAX INTEGER {
perDevice(1),
mstp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New mode of spaning tree supported by the device after the next reset."
DEFVAL { perDevice }
::= { rldot1dStp 9 }
rldot1dStpMonitorTime OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Factor of hello-time during which a port is monotored to determine if it is stable."
DEFVAL { 10 }
::= { rldot1dStp 10 }
rldot1dStpBpduCount OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of bpdu that need to received for the link to be considered stable."
DEFVAL { 10 }
::= { rldot1dStp 11 }
rldot1dStpLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time any object in this table was changed
by SNMP or other local management means."
REFERENCE
""
::= { rldot1dStp 12 }
--
-- rldot1dStpPortTable
--
rldot1dStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains extended pair port specific information."
::= { rldot1dStp 13 }
rldot1dStpPortEntry OBJECT-TYPE
SYNTAX Rldot1dStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that port."
INDEX { rldot1dStpPortPort }
::= { rldot1dStpPortTable 1 }
Rldot1dStpPortEntry ::= SEQUENCE {
rldot1dStpPortPort INTEGER,
rldot1dStpPortDampEnable TruthValue,
rldot1dStpPortDampStable TruthValue,
rldot1dStpPortFilterBpdu INTEGER,
rldot1dStpPortBpduSent Counter32,
rldot1dStpPortBpduReceived Counter32,
rldot1dStpPortRole INTEGER,
rldot1dStpBpduType INTEGER,
rldot1dStpPortRestrictedRole TruthValue,
rldot1dStpPortAutoEdgePort TruthValue,
rldot1dStpPortLoopback TruthValue,
rldot1dStpPortBpduOperStatus INTEGER,
rldot1dStpPortTcnGuardEnable TruthValue
}
rldot1dStpPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1dStpPortEntry 1 }
rldot1dStpPortDampEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified if dampening is enabled on this port."
REFERENCE
""
DEFVAL { false }
::= { rldot1dStpPortEntry 2 }
rldot1dStpPortDampStable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified if the port is stable."
REFERENCE
""
DEFVAL { true }
::= { rldot1dStpPortEntry 3 }
rldot1dStpPortFilterBpdu OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified if this port should filter bpdus when stp is disabled."
REFERENCE
""
DEFVAL { none }
::= { rldot1dStpPortEntry 4 }
rldot1dStpPortBpduSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the number of bpdu sent from this port."
REFERENCE
""
::= { rldot1dStpPortEntry 5 }
rldot1dStpPortBpduReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the number of bpdu received in this port."
REFERENCE
""
::= { rldot1dStpPortEntry 6 }
rldot1dStpPortRole OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the role of this this port."
REFERENCE
""
::= { rldot1dStpPortEntry 7 }
rldot1dStpBpduType OBJECT-TYPE
SYNTAX INTEGER {
stp(0),
rstp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the type of BPDU transmitted by this port."
::= { rldot1dStpPortEntry 8 }
rldot1dStpPortRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If TRUE causes the Port not to be selected as Root Port for the CIST or
any MSTI, even if it has the best spanning tree priority vector.
Such a Port will be selected as an Alternate Port after the Root Port
has been selected."
REFERENCE
"IEEE 802.1ad-D3-1: Section 13.24.29"
DEFVAL { false }
::= { rldot1dStpPortEntry 9 }
rldot1dStpPortAutoEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If TRUE causes the Port when become up, to enter the blocking state,
and if during 3 seconds it doesn't receive a BPDU, it will enter
the forwarding state."
REFERENCE
"IEEE 802.1D-2004: Section 17.13.3"
DEFVAL { false }
::= { rldot1dStpPortEntry 10 }
rldot1dStpPortLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified loopback was detected on port.
Usable for only a short period of time if stp loopback guard is enabled
(since port enters into shutdown state)."
REFERENCE
""
::= { rldot1dStpPortEntry 11 }
rldot1dStpPortBpduOperStatus OBJECT-TYPE
SYNTAX INTEGER {
filter(0),
flood(1),
bridge(2),
stp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified BPDU handling operative status for port."
REFERENCE
""
::= { rldot1dStpPortEntry 12 }
rldot1dStpPortTcnGuardEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable TCN guard on port. TCN guard prevents receiving topology change notifications."
::= { rldot1dStpPortEntry 13 }
rldot1dStpPortsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable / Disable spanning tree on ports by default ."
DEFVAL { true }
::= { rldot1dStp 14 }
rldot1dStpTaggedFlooding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"flooding can be done in tagged bpdu ."
::= { rldot1dStp 15 }
rldot1dStpPortBelongToVlanDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default value of rldot1dStpPortMustBelongToVlan ."
::= { rldot1dStp 16 }
rldot1dStpEnableByDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default value of rldot1dStpEnable ."
::= { rldot1dStp 17 }
rldot1dStpPortToDefault OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To order port/s to revert to default setings ."
::= { rldot1dStp 18 }
rldot1dStpSupportedType OBJECT-TYPE
SYNTAX INTEGER {
perDevice(1),
perVlan(2),
mstp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of stp supported by the device."
::= { rldot1dStp 19 }
rldot1dStpEdgeportSupportInStp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If EdgePort is supported in stpCompatible mode ."
::= { rldot1dStp 20 }
rldot1dStpFilterBpdu OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified if the device should filter BPDUs when STP is disabled."
::= { rldot1dStp 21 }
rldot1dStpFloodBpduMethod OBJECT-TYPE
SYNTAX INTEGER {
classic(0),
bridging(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified flooding method:
1 - classic - untagged to all stp disabled ports
2 - bridging -normal bridging."
::= { rldot1dStp 22 }
rldot1dStpSeparatedBridges OBJECT IDENTIFIER ::= { rldot1dStp 23 }
--
-- rldot1dStpPortBpduGuardTable
--
rldot1dStpPortBpduGuardTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpPortBpduGuardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains for each port whether it is bpdu guard ."
::= { rldot1dStp 24 }
rldot1dStpPortBpduGuardEntry OBJECT-TYPE
SYNTAX Rldot1dStpPortBpduGuardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
whether it is bpdu guard."
INDEX { dot1dBasePort }
::= { rldot1dStpPortBpduGuardTable 1 }
Rldot1dStpPortBpduGuardEntry ::= SEQUENCE {
rldot1dStpPortBpduGuardEnable TruthValue
}
rldot1dStpPortBpduGuardEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified if bpdu guard is enabled on this port."
REFERENCE
""
DEFVAL { false }
::= { rldot1dStpPortBpduGuardEntry 1 }
rldot1dStpLoopbackGuardEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define if STP loopback guard feature is globally enabled."
DEFVAL { false }
::= { rldot1dStp 25 }
rldot1dStpSeparatedBridgesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpSeparatedBridgesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define if separated bridges feature is enabled for each interface."
::= { rldot1dStpSeparatedBridges 1 }
rldot1dStpSeparatedBridgesEntry OBJECT-TYPE
SYNTAX Rldot1dStpSeparatedBridgesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the contents of each line in the rlSeparatedBridgesTable table."
INDEX { ifIndex }
::= { rldot1dStpSeparatedBridgesTable 1 }
Rldot1dStpSeparatedBridgesEntry ::= SEQUENCE {
rldot1dStpSeparatedBridgesPortEnable TruthValue
}
rldot1dStpSeparatedBridgesPortEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the separated bridge feature is enabled on a specified ifIndex."
DEFVAL { false }
::= { rldot1dStpSeparatedBridgesEntry 1 }
rldot1dStpSeparatedBridgesEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable Separated Bridges Feature."
DEFVAL { false }
::= { rldot1dStpSeparatedBridges 2 }
rldot1dStpSeparatedBridgesAutoConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / Disable Separated Bridges Automatic Configuration."
DEFVAL { false }
::= { rldot1dStpSeparatedBridges 3 }
rldot1dStpDisabledPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1dStpDisabledPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define stp port state for each stp disabled interface.
This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port.
The MIB contains only stp disabled ports entries "
::= { rldot1dStp 26 }
rldot1dStpDisabledPortStateEntry OBJECT-TYPE
SYNTAX Rldot1dStpDisabledPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the contents of each line in the rldot1dStpDisabledPortStateTable table."
INDEX { dot1dStpPort }
::= { rldot1dStpDisabledPortStateTable 1 }
Rldot1dStpDisabledPortStateEntry ::= SEQUENCE {
rldot1dStpDisabledPortState INTEGER
}
rldot1dStpDisabledPortState OBJECT-TYPE
SYNTAX INTEGER {
blocking(2),
listening(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's stp state as defined by external
application . This state controls what action a port takes on
reception of a frame."
DEFVAL {forwarding}
::= { rldot1dStpDisabledPortStateEntry 1 }
rldot1dExtBase OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 3 }
rldot1dExtBaseMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rldot1dExtBase 1 }
rldot1dDeviceCapabilities OBJECT-TYPE
-- SYNTAX BITS {
-- rldot1dIGMPSnoopingFilteringServices(0)
-- ## can perform filtering of
-- ## individual multicast addresses
-- ## controlled by IGMP snooping.
-- rldot1dDefaultFilteringAllServices(1)
-- ## can perform default filtering
-- ## behavior for All multicast addresses.
-- ## controlled by Multicast DB.
-- rldot1dDefaultFilteringUnregServices(2)
-- ## can perform default filtering
-- ## behavior for Unregistered
-- ## multicast addresses.
-- ## controlled by Multicast DB.
-- }
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the optional parts of private extension of
IEEE 802.1D and 802.1Q that are implemented by this
device and are manageable through this MIB.
Capabilities that are allowed on a per-port basis are
indicated in dot1dPortCapabilities."
::= { rldot1dExtBase 2 }
rldot1dStpClearPortCounters OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the number of bpdu sent and recieved on specific port,
if Value of 0 is specified then clear counters action is applied to all ports,
this object behaviors is write-only, when reading this object
it will always return 0."
::= { rldot1dStp 27 }
rldot1wRStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 4 }
--
-- rldot1wStpVlanEdgePortTable
--
rldot1wRStpVlanEdgePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1wRStpVlanEdgePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains pair <vlan, port> specific information
for the Rapid Spanning Tree Protocol."
::= { rldot1wRStp 1 }
rldot1wRStpVlanEdgePortEntry OBJECT-TYPE
SYNTAX Rldot1wRStpVlanEdgePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every pair <vlan, port>
about the RAPID Spanning Tree Protocol state for that pair."
INDEX { rldot1wRStpVlanEdgePortVlan, rldot1wRStpVlanEdgePortPort }
::= { rldot1wRStpVlanEdgePortTable 1 }
Rldot1wRStpVlanEdgePortEntry ::= SEQUENCE {
rldot1wRStpVlanEdgePortVlan INTEGER,
rldot1wRStpVlanEdgePortPort INTEGER,
rldot1wRStpEdgePortStatus TruthValue
}
rldot1wRStpVlanEdgePortVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management information,
If STP per device then only one value of 1 is allowed.
If STP per a VLAN then all value of 1..4095 are allowed."
::= { rldot1wRStpVlanEdgePortEntry 1 }
rldot1wRStpVlanEdgePortPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management information."
::= { rldot1wRStpVlanEdgePortEntry 2 }
rldot1wRStpEdgePortStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether this port is an Edge Port or not"
REFERENCE
"IEEE 802.1wd6-2000: Section 17.13.3.1 "
DEFVAL { false }
::= { rldot1wRStpVlanEdgePortEntry 3 }
--
-- rldot1wStpForceVersionTable
--
rldot1wRStpForceVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1wRStpForceVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains <vlan> specific information
for the Rapid Spanning Tree Protocol."
::= { rldot1wRStp 2 }
rldot1wRStpForceVersionEntry OBJECT-TYPE
SYNTAX Rldot1wRStpForceVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every <vlan>
about the RAPID Spanning Tree Protocol state for that pair."
INDEX { rldot1wRStpForceVersionVlan }
::= { rldot1wRStpForceVersionTable 1 }
Rldot1wRStpForceVersionEntry ::= SEQUENCE {
rldot1wRStpForceVersionVlan INTEGER,
rldot1wRStpForceVersionState INTEGER
}
rldot1wRStpForceVersionVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management information,
If STP per device then only one value of 1 is allowed.
If STP per a VLAN then all value of 1..4095 are allowed."
::= { rldot1wRStpForceVersionEntry 1 }
rldot1wRStpForceVersionState OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether this Bridge uses the normal RSTP algorithm,
or STP Compatibility algorythm:
0 - STP Compatibility
2 - Normal RSTP"
REFERENCE
"IEEE 802.1wd9-2000: Section 17.16.1 "
DEFVAL { 2 }
::= { rldot1wRStpForceVersionEntry 2 }
rldot1pPriorityMap OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 5 }
rldot1pPriorityMapState OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable / disable"
::= { rldot1pPriorityMap 1 }
rldot1pPriorityMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1pPriorityMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table hold information the priority maps"
::= { rldot1pPriorityMap 2 }
rldot1pPriorityMapEntry OBJECT-TYPE
SYNTAX Rldot1pPriorityMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table."
INDEX { rldot1pPriorityMapName }
::= { rldot1pPriorityMapTable 1 }
Rldot1pPriorityMapEntry ::= SEQUENCE {
rldot1pPriorityMapName DisplayString,
rldot1pPriorityMapPriority OCTET STRING,
rldot1pPriorityMapPort PortList,
rldot1pPriorityMapPortList PortList,
rldot1pPriorityMapStatus RowStatus
}
rldot1pPriorityMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..25))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The map name"
::= { rldot1pPriorityMapEntry 1 }
rldot1pPriorityMapPriority OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The map holding the queue"
::= { rldot1pPriorityMapEntry 2 }
rldot1pPriorityMapPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the port that the map, is applied on in config"
::= { rldot1pPriorityMapEntry 3 }
rldot1pPriorityMapPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ports that the map, is applied on in actual"
::= { rldot1pPriorityMapEntry 4 }
rldot1pPriorityMapStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the table entry. It's used to delete an entry"
::= { rldot1pPriorityMapEntry 5 }
rldot1sMstp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 6 }
--
-- The Multiple Spanning Tree Instance Table
--
rldot1sMstpInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Mstp instance specific information
for the Multiple Spanning Tree Protocol."
::= { rldot1sMstp 1 }
rldot1sMstpInstanceEntry OBJECT-TYPE
SYNTAX Rldot1sMstpInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every instance
about the multiple Spanning Tree Protocol state for
that instance."
INDEX { rldot1sMstpInstanceId }
::= { rldot1sMstpInstanceTable 1 }
Rldot1sMstpInstanceEntry ::= SEQUENCE {
rldot1sMstpInstanceId INTEGER,
rldot1sMstpInstanceEnable TruthValue,
rldot1sMstpInstanceTimeSinceTopologyChange TimeTicks,
rldot1sMstpInstanceTopChanges Counter,
rldot1sMstpInstanceDesignatedRoot BridgeId,
rldot1sMstpInstanceRootCost INTEGER,
rldot1sMstpInstanceRootPort INTEGER,
rldot1sMstpInstanceMaxAge Timeout,
rldot1sMstpInstanceHelloTime Timeout,
rldot1sMstpInstanceHoldTime INTEGER,
rldot1sMstpInstanceForwardDelay Timeout,
rldot1sMstpInstancePriority INTEGER,
rldot1sMstpInstanceRemainingHopes INTEGER,
rldot1sMstpInstanceSwId INTEGER
}
rldot1sMstpInstanceId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Instance index."
::= { rldot1sMstpInstanceEntry 1 }
rldot1sMstpInstanceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether this Instance is STP enable or disable"
REFERENCE
" ?? "
::= { rldot1sMstpInstanceEntry 2 }
rldot1sMstpInstanceTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
Mstp Instance ."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1sMstpInstanceEntry 3 }
rldot1sMstpInstanceTopChanges OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by
this Instance since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { rldot1sMstpInstanceEntry 4 }
rldot1sMstpInstanceDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Muliple Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { rldot1sMstpInstanceEntry 5 }
rldot1sMstpInstanceRootCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { rldot1sMstpInstanceEntry 6 }
rldot1sMstpInstanceRootPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { rldot1sMstpInstanceEntry 7 }
rldot1sMstpInstanceMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { rldot1sMstpInstanceEntry 8 }
rldot1sMstpInstanceHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { rldot1sMstpInstanceEntry 9 }
rldot1sMstpInstanceHoldTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { rldot1sMstpInstanceEntry 10 }
rldot1sMstpInstanceForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { rldot1sMstpInstanceEntry 11 }
rldot1sMstpInstancePriority OBJECT-TYPE
SYNTAX INTEGER (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge
ID, i.e., the first four bits of the first octet
of the (8 octet long) Bridge ID.The value is a product
of 4096. The next 12 bit are the msti id .
The other (last) 6 octets of the Bridge ID are given
by the value of dot1dBaseBridgeAddress."
REFERENCE
"IEEE 802.1S-2001: Section 13.24.2"
::= {rldot1sMstpInstanceEntry 12 }
rldot1sMstpInstanceRemainingHopes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This count value determines the amount of hopes
the information transmited by this bridge on this
instance can travel."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { rldot1sMstpInstanceEntry 13 }
rldot1sMstpInstanceSwId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical Instance Id which is binded for this entry from rldot1sMstpSwInstanceTable."
::= { rldot1sMstpInstanceEntry 14 }
--
-- rldot1sMstpInstancePortTable
--
rldot1sMstpInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains pair <msti, port> specific information
for the Spanning Tree Protocol."
::= { rldot1sMstp 2 }
rldot1sMstpInstancePortEntry OBJECT-TYPE
SYNTAX Rldot1sMstpInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every pair <msti, port>
about the Spanning Tree Protocol state for that pair."
INDEX { rldot1sMstpInstancePortMstiId, rldot1sMstpInstancePortPort }
::= { rldot1sMstpInstancePortTable 1 }
Rldot1sMstpInstancePortEntry ::= SEQUENCE {
rldot1sMstpInstancePortMstiId INTEGER,
rldot1sMstpInstancePortPort INTEGER,
rldot1sMstpInstancePortPriority INTEGER,
rldot1sMstpInstancePortState INTEGER,
rldot1sMstpInstancePortEnable INTEGER,
rldot1sMstpInstancePortPathCost INTEGER,
rldot1sMstpInstancePortDesignatedRoot BridgeId,
rldot1sMstpInstancePortDesignatedCost INTEGER,
rldot1sMstpInstancePortDesignatedBridge BridgeId,
rldot1sMstpInstancePortDesignatedPort OCTET STRING,
rldot1sMstpInstancePortForwardTransitions Counter,
rldot1sMStpInstancePortAdminPathCost INTEGER,
rldot1sMStpInstancePortRole INTEGER
}
rldot1sMstpInstancePortMstiId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan group number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1s/D11-2001 "
::= { rldot1sMstpInstancePortEntry 1 }
rldot1sMstpInstancePortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1sMstpInstancePortEntry 2 }
rldot1sMstpInstancePortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The value is a product of 16.
The other octet of the Port ID is given by the value
of rldot1dStpVlanGroupPort."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1sMstpInstancePortEntry 3 }
rldot1sMstpInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1sMstpInstancePortEntry 4 }
rldot1sMstpInstancePortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { rldot1sMstpInstancePortEntry 5 }
rldot1sMstpInstancePortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { rldot1sMstpInstancePortEntry 6 }
rldot1sMstpInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { rldot1sMstpInstancePortEntry 7 }
rldot1sMstpInstancePortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1sMstpInstancePortEntry 8 }
rldot1sMstpInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { rldot1sMstpInstancePortEntry 9 }
rldot1sMstpInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { rldot1sMstpInstancePortEntry 10 }
rldot1sMstpInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { rldot1sMstpInstancePortEntry 11 }
rldot1sMStpInstancePortAdminPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost, which
returns the operational value of the path cost."
REFERENCE
"IEEE 802.1D-1998: Section 8.5.5.3"
::= { rldot1sMstpInstancePortEntry 12 }
rldot1sMStpInstancePortRole OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the role of this this port."
REFERENCE
""
::= { rldot1sMstpInstancePortEntry 13 }
rldot1sMstpMaxHopes OBJECT-TYPE
SYNTAX INTEGER (1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max number of hopes that an MST BPDU will travel inside a region."
DEFVAL { 20 }
::= { rldot1sMstp 3 }
rldot1sMstpConfigurationName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active configuration name as will be caried in MST BPDU's."
::= { rldot1sMstp 4 }
rldot1sMstpRevisionLevel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active revision level."
DEFVAL { 0 }
::= { rldot1sMstp 5 }
--
-- rldot1sMstpVlanTable
--
rldot1sMstpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about the alocation of vlans to groups."
::= { rldot1sMstp 6 }
rldot1sMstpVlanEntry OBJECT-TYPE
SYNTAX Rldot1sMstpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every vlan
about the group it belongs to."
INDEX { rldot1sMstpVlan }
::= { rldot1sMstpVlanTable 1 }
Rldot1sMstpVlanEntry ::= SEQUENCE {
rldot1sMstpVlan INTEGER,
rldot1sMstpGroup INTEGER,
rldot1sMstpPendingGroup INTEGER
}
rldot1sMstpVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan number of the vlan for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1s/D11-2001: Section 13.7"
::= { rldot1sMstpVlanEntry 1 }
rldot1sMstpGroup OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifid the active group number this vlan belonges to."
REFERENCE
""
DEFVAL { 0 }
::= { rldot1sMstpVlanEntry 2 }
rldot1sMstpPendingGroup OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifid the pending group number this vlan belonges to."
REFERENCE
""
DEFVAL { 0 }
::= { rldot1sMstpVlanEntry 3 }
--
-- rldot1sMstpExtPortTable
--
rldot1sMstpExtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains MSTP information about ports of the CIST."
::= { rldot1sMstp 7 }
rldot1sMstpExtPortEntry OBJECT-TYPE
SYNTAX Rldot1sMstpExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
of the CIST."
INDEX { rldot1sMstpExtPortPort }
::= { rldot1sMstpExtPortTable 1 }
Rldot1sMstpExtPortEntry ::= SEQUENCE {
rldot1sMstpExtPortPort INTEGER,
rldot1sMstpExtPortInternalOperPathCost INTEGER,
rldot1sMstpExtPortDesignatedRegionalRoot BridgeId,
rldot1sMstpExtPortDesignatedRegionalCost INTEGER,
rldot1sMstpExtPortBoundary TruthValue,
rldot1sMstpExtPortInternalAdminPathCost INTEGER
}
rldot1sMstpExtPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1t/D2-1999: Section 9.2.6"
::= { rldot1sMstpExtPortEntry 1 }
rldot1sMstpExtPortInternalOperPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree regional root which
include this port. 802.1S-2002 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
::= { rldot1sMstpExtPortEntry 2 }
rldot1sMstpExtPortDesignatedRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { rldot1sMstpExtPortEntry 3 }
rldot1sMstpExtPortDesignatedRegionalCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The regional path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1sMstpExtPortEntry 4 }
rldot1sMstpExtPortBoundary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication if the port is conented to to a lan segment
outside or inside the region."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { rldot1sMstpExtPortEntry 5 }
rldot1sMstpExtPortInternalAdminPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost, which
returns the operational value of the path cost."
::= { rldot1sMstpExtPortEntry 6 }
rldot1sMstpDesignatedMaxHopes OBJECT-TYPE
SYNTAX INTEGER (1..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max number of hopes that an MST BPDU will travel inside a region."
::= { rldot1sMstp 8 }
rldot1sMstpRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CIST Regional Root Identifier (13.16.4).
The Bridge Identifier of the current CIST Regional Root."
REFERENCE
"IEEE 802.1S-2002: Section 13.16.4"
::= { rldot1sMstp 9 }
rldot1sMstpRegionalRootCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CIST path cost from the transmitting Bridge to the
CIST Regional Root."
REFERENCE
"IEEE 802.1S-2002: Section 12.8.1.1.3"
::= { rldot1sMstp 10 }
rldot1sMstpPendingConfigurationName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pending configuration name."
::= { rldot1sMstp 11 }
rldot1sMstpPendingRevisionLevel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pending revision level."
DEFVAL { 0 }
::= { rldot1sMstp 12 }
rldot1sMstpPendingAction OBJECT-TYPE
SYNTAX INTEGER {
copyPendingActive(1),
copyActivePending(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be done with the pending configuration.
copyPendingActive - to copy the pending mst configuration to the active one.
copyActivePending - to copy the active mst configuration to the pending one. "
::= { rldot1sMstp 13 }
rldot1sMstpRemainingHops OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This count value determines the amount of hops
the information transmitted by this bridge can travel."
::= { rldot1sMstp 14 }
--
-- rldot1sMstpInstanceVlanTable
--
rldot1sMstpInstanceVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpInstanceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains vlan lists per MSTP instances."
::= { rldot1sMstp 15 }
rldot1sMstpInstanceVlanEntry OBJECT-TYPE
SYNTAX Rldot1sMstpInstanceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The entry contains vlan lists per specific MSTP instance."
INDEX { rldot1sMstpInstanceVlanId, rldot1sMstpInstanceVlanDbType }
::= { rldot1sMstpInstanceVlanTable 1 }
Rldot1sMstpInstanceVlanEntry::= SEQUENCE {
rldot1sMstpInstanceVlanId INTEGER,
rldot1sMstpInstanceVlanDbType INTEGER,
rldot1sMstpInstanceVlanId1To1024 VlanList1,
rldot1sMstpInstanceVlanId1025To2048 VlanList2,
rldot1sMstpInstanceVlanId2049To3072 VlanList3,
rldot1sMstpInstanceVlanId3073To4094 VlanList4
}
rldot1sMstpInstanceVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifiy the instance number."
::= { rldot1sMstpInstanceVlanEntry 1 }
rldot1sMstpInstanceVlanDbType OBJECT-TYPE
SYNTAX INTEGER {
active(1),
pending(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifiy which data-base to access: active or pending."
::= { rldot1sMstpInstanceVlanEntry 2 }
rldot1sMstpInstanceVlanId1To1024 OBJECT-TYPE
SYNTAX VlanList1
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"first VlanId List of specific MSTP instance."
::= { rldot1sMstpInstanceVlanEntry 3 }
rldot1sMstpInstanceVlanId1025To2048 OBJECT-TYPE
SYNTAX VlanList2
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"second VlanId List of specific MSTP instance."
::= { rldot1sMstpInstanceVlanEntry 4 }
rldot1sMstpInstanceVlanId2049To3072 OBJECT-TYPE
SYNTAX VlanList3
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"third VlanId List of specific MSTP instance."
::= { rldot1sMstpInstanceVlanEntry 5 }
rldot1sMstpInstanceVlanId3073To4094 OBJECT-TYPE
SYNTAX VlanList4
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"fourth VlanId List of specific MSTP instance."
::= { rldot1sMstpInstanceVlanEntry 6 }
--
-- rldot1sMstpSwInstanceTable
--
rldot1sMstpSwInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rldot1sMstpSwInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains logical instance to rldot1sMstpInstanceId mapping."
::= { rldot1sMstp 18 }
rldot1sMstpSwInstanceEntry OBJECT-TYPE
SYNTAX Rldot1sMstpSwInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains logical instance information."
INDEX { rldot1sMstpSwInstanceSwId}
::= { rldot1sMstpSwInstanceTable 1 }
Rldot1sMstpSwInstanceEntry::= SEQUENCE {
rldot1sMstpSwInstanceSwId INTEGER,
rldot1sMstpSwInstanceId INTEGER,
rldot1sMstpSwInstanceStatus RowStatus
}
rldot1sMstpSwInstanceSwId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The STP Instance logical index."
::= { rldot1sMstpSwInstanceEntry 1 }
rldot1sMstpSwInstanceId OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The STP Instance index rldot1sMstpInstanceId which exist at rldot1sMstpInstanceTable."
::= { rldot1sMstpSwInstanceEntry 2 }
rldot1sMstpSwInstanceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the entry, used to add, delete or update an entry"
::= { rldot1sMstpSwInstanceEntry 3 }
--
-- rldot1sMstpPendingInstanceVlanTable
--
--rldot1sMstpPendingInstanceVlanTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF Rldot1sMstpPendingInstanceVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table contains vlan lists per MSTP instances."
-- ::= { rldot1sMstp 16 }
--
--rldot1sMstpPendingInstanceVlanEntry OBJECT-TYPE
-- SYNTAX Rldot1sMstpPendingInstanceVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The entry contains vlan lists per specific MSTP instance."
-- INDEX { rldot1sMstpPendingInstanceVlanId }
-- ::= { rldot1sMstpPendingInstanceVlanTable 1 }
--
--Rldot1sMstpPendingInstanceVlanEntry::= SEQUENCE {
-- rldot1sMstpPendingInstanceVlanId INTEGER,
-- rldot1sMstpPendingInstanceVlanId1To1024 VlanList1,
-- rldot1sMstpPendingInstanceVlanId1025To2048 VlanList2,
-- rldot1sMstpPendingInstanceVlanId2049To3072 VlanList3,
-- rldot1sMstpPendingInstanceVlanId3073To4094 VlanList4,
-- rldot1sMstpPendingInstanceVlanStatus RowStatus
-- }
--
--rldot1sMstpPendingInstanceVlanId OBJECT-TYPE
-- SYNTAX INTEGER (0..4094)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Specifiy the instance number."
-- ::= { rldot1sMstpPendingInstanceVlanEntry 1 }
--
--rldot1sMstpPendingInstanceVlanId1To1024 OBJECT-TYPE
-- SYNTAX VlanList1
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "first VlanId List of specific MSTP instance."
-- ::= { rldot1sMstpPendingInstanceVlanEntry 2 }
--
--rldot1sMstpPendingInstanceVlanId1025To2048 OBJECT-TYPE
-- SYNTAX VlanList2
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "second VlanId List of specific MSTP instance."
-- ::= { rldot1sMstpPendingInstanceVlanEntry 3 }
--
--rldot1sMstpPendingInstanceVlanId2049To3072 OBJECT-TYPE
-- SYNTAX VlanList3
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "third VlanId List of specific MSTP instance."
-- ::= { rldot1sMstpPendingInstanceVlanEntry 4 }
--
--rldot1sMstpPendingInstanceVlanId3073To4094 OBJECT-TYPE
-- SYNTAX VlanList4
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "fourth VlanId List of specific MSTP instance."
-- ::= { rldot1sMstpPendingInstanceVlanEntry 5 }
--
--
--rldot1sMstpPendingInstanceVlanStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of the table entry, used to add, delete or update an entry, when logical mstp IDs are supported,
-- Otherwise field value must be Active"
-- DEFVAL {active }
-- ::= { rldot1sMstpPendingInstanceVlanEntry 6 }
rldot1dTpAgingTime OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 7 }
rldot1dTpAgingTimeMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min timeout period in seconds for aging out
dynamically learned forwarding information."
REFERENCE
"P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
::= { rldot1dTpAgingTime 1 }
rldot1dTpAgingTimeMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max timeout period in seconds for aging out
dynamically learned forwarding information."
REFERENCE
"P802.1d/D9, July 14, 1989: Section 6.7.1.1.3"
::= { rldot1dTpAgingTime 2 }
rldot1sMstpConfigurationDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active configuration digest."
::= { rldot1sMstp 16 }
rldot1sMstpPendingConfigurationDigest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pending configuration digest."
::= { rldot1sMstp 17 }
--
-- PerVlan SpaningTree MIBs
--
-- rlBrgPvst
-- rlBrgPvstVlanTable, rlBrgPvstPortTable
--
rlBrgPvst OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 9 }
-- rlBrgPvstVlanTable
rlBrgPvstVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgPvstVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Per Vlan Spanning-Tree vlan configuration."
::= { rlBrgPvst 1 }
rlBrgPvstVlanEntry OBJECT-TYPE
SYNTAX RlBrgPvstVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains PVST configuration per specific Vlan."
INDEX { rlBrgPvstVlanId }
::= { rlBrgPvstVlanTable 1 }
RlBrgPvstVlanEntry ::= SEQUENCE {
rlBrgPvstVlanId INTEGER,
rlBrgPvstVlanHelloTime INTEGER,
rlBrgPvstVlanForwardDelay INTEGER,
rlBrgPvstVlanMaxAge INTEGER,
rlBrgPvstVlanPriority INTEGER,
rlBrgPvstVlanStatus RowStatus
}
rlBrgPvstVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number for this entry which contains PVST configuration."
::= { rlBrgPvstVlanEntry 1 }
rlBrgPvstVlanHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time intervals in seconds for the transmission of
Configuration PVST bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so.
When configuring the Hello time, the following relationship
should be maintained:
Max-Age >= 2*(Hello-Time + 1)."
DEFVAL { 2 }
::= { rlBrgPvstVlanEntry 2 }
rlBrgPvstVlanForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval in seconds, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state.
When configuring the forwarding time, the following relationship
should be maintained:
2*(Forward-Time - 1) >= Max-Age."
DEFVAL { 4 }
::= { rlBrgPvstVlanEntry 3 }
rlBrgPvstVlanMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum age time in seconds of PVST Protocol information learned
from the network on any port before it is discarded.
When configuring the maximum age, the following relationships
should be maintained:
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)."
DEFVAL { 15 }
::= { rlBrgPvstVlanEntry 4 }
rlBrgPvstVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge
ID, i.e., the first four bits of the first octet
of the (8 octet long) Bridge ID. The value is a product of 4096."
DEFVAL { 32768 }
::= { rlBrgPvstVlanEntry 5 }
rlBrgPvstVlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the table entry, used to add, delete or update an entry"
::= { rlBrgPvstVlanEntry 6 }
-- rlBrgPvstOperVlanTable
rlBrgPvstOperVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgPvstOperVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Per Vlan Spanning-Tree active vlan configuration."
::= { rlBrgPvst 2 }
rlBrgPvstOperVlanEntry OBJECT-TYPE
SYNTAX RlBrgPvstOperVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains PVST active configuration per specific Vlan."
INDEX { rlBrgPvstOperVlanId }
::= { rlBrgPvstOperVlanTable 1 }
RlBrgPvstOperVlanEntry ::= SEQUENCE {
rlBrgPvstOperVlanId INTEGER,
rlBrgPvstOperVlanEnable TruthValue,
rlBrgPvstOperVlanTimeSinceTopologyChange TimeTicks,
rlBrgPvstOperVlanTopChanges Counter,
rlBrgPvstOperVlanDesignatedRoot BridgeId,
rlBrgPvstOperVlanRootCost INTEGER,
rlBrgPvstOperVlanRootPort INTEGER,
rlBrgPvstOperVlanRootMaxAge INTEGER,
rlBrgPvstOperVlanRootHelloTime INTEGER,
rlBrgPvstOperVlanRootForwardDelay INTEGER,
rlBrgPvstOperVlanMaxAge INTEGER,
rlBrgPvstOperVlanHelloTime INTEGER,
rlBrgPvstOperVlanForwardDelay INTEGER,
-- rlBrgPvstOperVlanHoldTime INTEGER,
rlBrgPvstOperVlanPriority INTEGER
}
rlBrgPvstOperVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number for this entry which contains PVST active configuration."
::= { rlBrgPvstOperVlanEntry 1 }
rlBrgPvstOperVlanEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this Vlan is enabled for PVST / RPVST."
::= { rlBrgPvstOperVlanEntry 2 }
rlBrgPvstOperVlanTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in miliseconds) since the
last time a topology change was detected on current PVST Instance."
::= { rlBrgPvstOperVlanEntry 3 }
rlBrgPvstOperVlanTopChanges OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by
this on current PVST Instance since the management entity was last
reset or initialized."
::= { rlBrgPvstOperVlanEntry 4 }
rlBrgPvstOperVlanDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the PVST Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { rlBrgPvstOperVlanEntry 5 }
rlBrgPvstOperVlanRootCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from
current bridge on current vlan."
::= { rlBrgPvstOperVlanEntry 6 }
rlBrgPvstOperVlanRootPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root bridge."
::= { rlBrgPvstOperVlanEntry 7 }
rlBrgPvstOperVlanRootMaxAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rlBrgPvstVlanMaxAge which recieved from the root of current
PVST instance."
::= { rlBrgPvstOperVlanEntry 8 }
rlBrgPvstOperVlanRootHelloTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rlBrgPvstVlanHelloTime which recieved from the root of current
PVST instance."
::= { rlBrgPvstOperVlanEntry 9 }
rlBrgPvstOperVlanRootForwardDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rlBrgPvstVlanForwardDelay which recieved from the root of current
PVST instance."
::= { rlBrgPvstOperVlanEntry 10 }
rlBrgPvstOperVlanMaxAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational maximum age time in seconds of PVST Protocol information learned
from the network on any port before it is discarded.
When configuring the maximum age, the following relationships
should be maintained:
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)."
::= { rlBrgPvstOperVlanEntry 11 }
rlBrgPvstOperVlanHelloTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational time intervals in seconds for the transmission of
Configuration PVST bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so.
When configuring the Hello time, the following relationship
should be maintained:
Max-Age >= 2*(Hello-Time + 1)."
::= { rlBrgPvstOperVlanEntry 12 }
rlBrgPvstOperVlanForwardDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational time interval in seconds, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state.
When configuring the forwarding time, the following relationship
should be maintained:
2*(Forward-Time - 1) >= Max-Age."
::= { rlBrgPvstOperVlanEntry 13 }
rlBrgPvstOperVlanPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge
ID, i.e., the first four bits of the first octet
of the (8 octet long) Bridge ID. The value is a product of 4096."
::= { rlBrgPvstOperVlanEntry 14 }
-- rlBrgPvstPortTable
rlBrgPvstPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgPvstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Per Vlan Spanning-Tree Port configuration."
::= { rlBrgPvst 3 }
rlBrgPvstPortEntry OBJECT-TYPE
SYNTAX RlBrgPvstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains PVST configuration per specific Vlan and Port."
INDEX { rlBrgPvstPortVlanId, rlBrgPvstPortPort }
::= { rlBrgPvstPortTable 1 }
RlBrgPvstPortEntry ::= SEQUENCE {
rlBrgPvstPortVlanId INTEGER,
rlBrgPvstPortPort INTEGER,
rlBrgPvstPortPathCost INTEGER,
rlBrgPvstPortPriority INTEGER,
rlBrgPvstPortStatus RowStatus
}
rlBrgPvstPortVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number for this entry which contains PVST configuration."
::= { rlBrgPvstPortEntry 1 }
rlBrgPvstPortPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Per Vlan Spanning Tree Protocol management
information."
::= { rlBrgPvstPortEntry 2 }
rlBrgPvstPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
Default path cost is determined by port speed and path cost method (long or short)."
::= { rlBrgPvstPortEntry 3 }
rlBrgPvstPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Admin value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value
of rlBrgPvstPortPort.
The priority value must be a multiple of 16."
DEFVAL { 128 }
::= { rlBrgPvstPortEntry 4 }
rlBrgPvstPortStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the table entry, used to add, delete or update an entry"
::= { rlBrgPvstPortEntry 5 }
-- rlBrgPvstOperPortTable
rlBrgPvstOperPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgPvstOperPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Per Vlan Spanning-Tree active Port configuration."
::= { rlBrgPvst 4 }
rlBrgPvstOperPortEntry OBJECT-TYPE
SYNTAX RlBrgPvstOperPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains PVST active configuration per specific Vlan and Port."
INDEX { rlBrgPvstOperPortVlanId, rlBrgPvstOperPortPort }
::= { rlBrgPvstOperPortTable 1 }
RlBrgPvstOperPortEntry ::= SEQUENCE {
rlBrgPvstOperPortVlanId INTEGER,
rlBrgPvstOperPortPort INTEGER,
rlBrgPvstOperPortEnable TruthValue,
rlBrgPvstOperPortPathCost INTEGER,
rlBrgPvstOperPortPriority INTEGER,
rlBrgPvstOperPortState INTEGER,
rlBrgPvstOperPortRole INTEGER,
rlBrgPvstOperPortBpduType INTEGER,
rlBrgPvstOperPortDesignatedRoot BridgeId,
rlBrgPvstOperPortDesignatedCost INTEGER,
rlBrgPvstOperPortDesignatedBridge BridgeId,
rlBrgPvstOperPortDesignatedPort OCTET STRING,
rlBrgPvstOperPortForwardTransitions Counter32,
rlBrgPvstOperPortEdgePort TruthValue,
rlBrgPvstOperPortBpduSent Counter32,
rlBrgPvstOperPortBpduReceived Counter32
}
rlBrgPvstOperPortVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number for this entry which contains PVST configuration."
::= { rlBrgPvstOperPortEntry 1 }
rlBrgPvstOperPortPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Per Vlan Spanning Tree Protocol management
information."
::= { rlBrgPvstOperPortEntry 2 }
rlBrgPvstOperPortEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enabled/disabled status of the port."
::= { rlBrgPvstOperPortEntry 3 }
rlBrgPvstOperPortPathCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Operational contribution of this port to the path cost of
paths towards the spanning tree root which include
this port.
Default path cost is determined by port speed and path cost method
(long or short)."
::= { rlBrgPvstOperPortEntry 4 }
rlBrgPvstOperPortPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Operational value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value
of rlBrgPvstOperPortPort."
::= { rlBrgPvstOperPortEntry 5 }
rlBrgPvstOperPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
blocking (2),
listening (3),
learning (4),
forwarding(5),
broken (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6)state."
::= { rlBrgPvstOperPortEntry 6 }
rlBrgPvstOperPortRole OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
disabled (1),
alternate (2),
backup (3),
root (4),
designated (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the STP role of this this port."
::= { rlBrgPvstOperPortEntry 7 }
rlBrgPvstOperPortBpduType OBJECT-TYPE
SYNTAX INTEGER {
pvst (2),
rpvst(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the type of BPDU transmitted by this port."
::= { rlBrgPvstOperPortEntry 8 }
rlBrgPvstOperPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { rlBrgPvstOperPortEntry 9 }
rlBrgPvstOperPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
::= { rlBrgPvstOperPortEntry 10 }
rlBrgPvstOperPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { rlBrgPvstOperPortEntry 11 }
rlBrgPvstOperPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
::= { rlBrgPvstOperPortEntry 12 }
rlBrgPvstOperPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { rlBrgPvstOperPortEntry 13 }
rlBrgPvstOperPortEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
dot1dStpPortAdminEdgePort and is set FALSE on reception of
a BPDU."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { rlBrgPvstOperPortEntry 14 }
rlBrgPvstOperPortBpduSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the number of bpdu sent from this port."
::= { rlBrgPvstOperPortEntry 15 }
rlBrgPvstOperPortBpduReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specified the number of bpdu received in this port."
::= { rlBrgPvstOperPortEntry 16 }
-- rlBrgPvstInconsistencyPortTable
rlBrgPvstInconsistencyPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlBrgPvstInconsistencyPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Per Vlan Spanning-Tree Ports Inconsistency
information."
::= { rlBrgPvst 5 }
rlBrgPvstInconsistencyPortEntry OBJECT-TYPE
SYNTAX RlBrgPvstInconsistencyPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry contains Per Vlan Spanning-Tree Port Inconsistency information."
INDEX { rlBrgPvstInconsistencyVlanId, rlBrgPvstInconsistencyPort}
::= { rlBrgPvstInconsistencyPortTable 1 }
RlBrgPvstInconsistencyPortEntry ::= SEQUENCE {
rlBrgPvstInconsistencyVlanId INTEGER,
rlBrgPvstInconsistencyPort INTEGER,
rlBrgPvstInconsistencyState BITS
}
rlBrgPvstInconsistencyVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan number for this entry which contains PVST Port Inconsistency
information."
::= { rlBrgPvstInconsistencyPortEntry 1 }
rlBrgPvstInconsistencyPort OBJECT-TYPE
SYNTAX INTEGER (1..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry
contains Per Vlan Spanning Tree Port Inconsistency information."
::= { rlBrgPvstInconsistencyPortEntry 2 }
rlBrgPvstInconsistencyState OBJECT-TYPE
SYNTAX BITS {
type(0), -- a port-type inconsistency
pvid(1) -- a PVID inconsistency
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port PVST Inconsistency state."
::= { rlBrgPvstInconsistencyPortEntry 3 }
END
Reference in a new issue View git blame Copy permalink