graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/cisco/CISCO-IETF-PW-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1369 lines
49 KiB
Text
Raw Permalink Blame History

-- *****************************************************************
-- CISCO-IETF-PW-MIB.my
--
-- February 2003, Tim Swanson
--
-- Copyright (c) 2003-2004, 2006 by cisco Systems, Inc.
-- All rights reserved.
--
-- Made Cisco Proprietary based on IETF draft:
-- http://www.ietf.org/internet-drafts/draft-ietf-pwe3-pw-mib-00.txt
-- *****************************************************************
CISCO-IETF-PW-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
experimental, Integer32, Unsigned32,
Counter64, TimeTicks
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue, RowStatus, StorageType,
TimeStamp
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
CpwVcIndexType, CpwGroupID, CpwVcIDType, CpwOperStatus,
CpwVcType
FROM CISCO-IETF-PW-TC-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
ciscoExperiment
FROM CISCO-SMI
;
cpwVcMIB MODULE-IDENTITY
LAST-UPDATED "200403171200Z" -- 17 March 2004 12:00:00 GMT
ORGANIZATION
"Cisco Systems, Inc."
CONTACT-INFO
"
Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01824
Tel: +1-978-497-3051
Email: tnadeau@cisco.com
MPLS MIB Development Team
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01924
Tel: +1-978-497-3989
Email: ch-mpls-mib-dev@cisco.com
"
DESCRIPTION
"This MIB contains managed object definitions for Pseudo
Wire operation as in: Pate, P., et al, <draft-ietf-pwe3-
framework>, Xiao, X., et al, <draft-ietf-pwe3-
requirements>, Martini, L., et al, <draft-martini-
l2circuit-trans-mpls>, and Martini, L., et al,
<draft-martini-l2circuit-encap-mpls>.
The indexes for this MIB are also used to index the PSN-
specific tables and the VC-specific tables. The VC Type
dictates which VC-specific MIB to use. For example, a
'cep' VC Type requires the use the configuration and status
tables within the CEP-MIB.
This MIB enable the use of any underlying packet switched
network (PSN). Specific tables for the MPLS PSN is
currently defined in a separate CISCO-IETF-PW-MPLS-MIB.
Tables to support other PSNs (IP, L2TP for example) will
be added to this MIB in future revisions.
At the time of publication of this version, there are no
PWE3 WG documents for all features and objects in this MIB,
and the MIB is therefore subject to change based on the WG
progress."
-- Revision history.
REVISION "200403171200Z" -- 17 March 2004 12:00:00 GMT
DESCRIPTION
"1) Added notifications group:
-cpwVcUpDownNotifEnable
-cpwVcNotifRate
-cpwVcDown
-cpwVcUp
2) Added CANA OID value ciscoExperiment.106
3) updated based on MIB police comments
-replaced un-cisco-ized variable names w/
cisco-ized names in descriptions (e.g. pwVcxxx
replaced w/ cpwVcxxx)
"
REVISION "200302261200Z" -- 26 Feb 2003 12:00:00 GMT
DESCRIPTION
"Made Cisco proprietary based on the PW-MIB.my file
extracted from draft-ietf-pwe3-pw-mib-00.txt
"
REVISION
"200205261200Z" -- 26 May 2002 12:00:00 EST
DESCRIPTION
"Moved to draft-ietf-00 status. Changes from previous draft:
1) Change name of pwVcPriority to pwVcSetUpPriority and
added pwVcHoldingPriority.
2) Add pwVcIdMappingTable and pwVcPeersMappingTable to help
ordered query of the MIB tables for EMS applications.
3) Clarification to work in progress objects.
4) Editorial and typos in descriptions.
5) Added pwVcPerfTotalDiscontinuityTime and
pwVcPerfIntervalTimeElapsed.
6) Remove 32 bit counters.
"
REVISION
"200201301200Z" -- 30 January 2002 12:00:00 EST
DESCRIPTION
" Changes from -01 draft:
1) Inbound and outbound clarification and name changes.
2) Removing pwVcPeerIpv4Addr and pwVcPeerIpv6Addr,
replacing them with pwVcPeerAddr and adding type for
address type selection.
3) Adding type for VC OperStatus.
4) Adding pwVcTimeElapsed and pwVcValidIntervals.
"
REVISION
"200111071200Z" -- 7 November 2001 12:00:00 EST
DESCRIPTION
"Changes from -00 draft:
1) Remove VcInstance from tables indexes in order to simplify
the MIB.
2) Removing APS 1+1 table.
3) Changing hdlcCisco to hdlc in pwVcType.
4) Add description of VC label at pending PW signaling stage.
5) Add interval valid object in interval performance tables.
6) Remove VC APS notification.
7) Change 'conservative'/'liberal' to 'strict'/'loose'.
8) Add objects for interface MTU, use of control word,
interface string.
9) Ordering of objects based on functionality.
10) Update operation of pwVcOperStatus.
"
REVISION
"200107111200Z" -- 11 July 2001 12:00:00 EST
DESCRIPTION
"draft-00 version"
::= { ciscoExperiment 106 }
-- Top-level components of this MIB.
-- Notifications
-- Tables, Scalars
cpwVcObjects OBJECT IDENTIFIER
::= { cpwVcMIB 1 }
-- Notifications
cpwVcNotifications OBJECT IDENTIFIER
::= { cpwVcMIB 2 }
-- Conformance
cpwVcConformance OBJECT IDENTIFIER
::= { cpwVcMIB 3 }
-- PW Virtual Connection (VC) Table
cpwVcIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for cpwVcIndex when creating entries in the
cpwVcTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of cpwVcIndex for a new entry in the
cpwVcTable, the manager issues a management
protocol retrieval operation to obtain the current
value of cpwVcIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse."
::= { cpwVcObjects 1 }
cpwVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for connecting various
emulated services to various tunnel type."
::= { cpwVcObjects 2 }
cpwVcEntry OBJECT-TYPE
SYNTAX CpwVcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents an emulated virtual
connection (VC) across a packet network. It is indexed by
cpwVcIndex, which uniquely identifying a singular
connection.
"
INDEX { cpwVcIndex }
::= { cpwVcTable 1 }
CpwVcEntry ::= SEQUENCE {
cpwVcIndex CpwVcIndexType,
cpwVcType CpwVcType,
cpwVcOwner INTEGER,
cpwVcPsnType INTEGER,
cpwVcSetUpPriority Integer32,
cpwVcHoldingPriority Integer32,
cpwVcInboundMode INTEGER,
cpwVcPeerAddrType InetAddressType,
cpwVcPeerAddr InetAddress,
cpwVcID CpwVcIDType,
cpwVcLocalGroupID CpwGroupID,
cpwVcControlWord TruthValue,
cpwVcLocalIfMtu Unsigned32,
cpwVcLocalIfString TruthValue,
cpwVcRemoteGroupID CpwGroupID,
cpwVcRemoteControlWord INTEGER,
cpwVcRemoteIfMtu Unsigned32,
cpwVcRemoteIfString SnmpAdminString,
cpwVcOutboundVcLabel Unsigned32,
cpwVcInboundVcLabel Unsigned32,
cpwVcName SnmpAdminString,
cpwVcDescr SnmpAdminString,
cpwVcCreateTime TimeStamp,
cpwVcUpTime TimeTicks,
cpwVcAdminStatus INTEGER,
cpwVcOperStatus CpwOperStatus,
cpwVcInboundOperStatus CpwOperStatus,
cpwVcOutboundOperStatus CpwOperStatus,
cpwVcTimeElapsed Integer32,
cpwVcValidIntervals Integer32,
cpwVcRowStatus RowStatus,
cpwVcStorageType StorageType
}
cpwVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the conceptual row identifying a VC within
this PW Emulation VC table."
::= { cpwVcEntry 1 }
cpwVcType OBJECT-TYPE
SYNTAX CpwVcType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicate the service to be carried over
this VC.
Note: the exact set of VC types is yet to be worked
out by the WG.
"
::= { cpwVcEntry 2 }
cpwVcOwner OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
maintenanceProtocol (2), -- PW signaling
other (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set by the operator to indicate the protocol responsible
for establishing this VC. Value 'manual' is used in all
cases where no maintenance protocol (PW signaling) is used
to set-up the VC, i.e. require configuration of entries in
the VC tables including VC labels, etc. The value
'maintenanceProtocol' is used in case of standard
signaling of the VC for the specific PSN, for example LDP
for MPLS PSN as specified in <draft- draft-martini-
l2circuit-trans-mpls> or L2TP control protocol.
Value 'other' is used for other types of signaling."
::= { cpwVcEntry 3 }
cpwVcPsnType OBJECT-TYPE
SYNTAX INTEGER {
mpls (1),
l2tp (2),
ip (3),
mplsOverIp (4), -- May be combined with 'mpls' in the future
gre (5),
other (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set by the operator to indicate the PSN type on which this
VC will be carried. Based on this object, the relevant PSN
table entries are created in the in the PSN specific MIB
modules. For example, if mpls(1) is defined, the agent
create an entry in cpwVcMplsTable, which further define the
MPLS PSN configuration.
Note: the exact set of PSN types is yet to be worked
out by the WG.
"
::= { cpwVcEntry 4 }
cpwVcSetUpPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object define the relative set-up priority of the VC
in a lowest-to-highest fashion, where 0 is the highest
priority. VCs with the same priority are treated with
equal priority. Dropped VC will be set 'dormant' (as
indicated in cpwVcOperStatus).
This value is significant if there are competing resources
between VCs and the implementation support this feature.
If not supported or not relevant, the value of zero MUST
be used."
DEFVAL
{ 0 }
::= { cpwVcEntry 5 }
cpwVcHoldingPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object define the relative holding priority of the VC
in a lowest-to-highest fashion, where 0 is the highest
priority. VCs with the same priority are treated with
equal priority. Dropped VC will be set 'dormant' (as
indicated in cpwVcOperStatus).
This value is significant if there are competing resources
between VCs and the implementation support this feature.
If not supported or not relevant, the value of zero MUST
be used."
DEFVAL
{ 0 }
::= { cpwVcEntry 6 }
cpwVcInboundMode OBJECT-TYPE
SYNTAX INTEGER {
loose (1),
strict (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable greater security for
implementation that use per platform VC label space. In
strict mode, packets coming from the PSN are accepted only
from tunnels that are associated to the same VC via the
inbound tunnel table in the case of MPLS, or as identified
by the source IP address in case of L2TP or IP PSN. The
entries in the inbound tunnel table are either explicitly
configured or implicitly known by the maintenance protocol
used for VC set-up.
If such association is not known, not configured or not
desired, loose mode should be configured, and the node
should accept the packet based on the VC label only
regardless of the outer tunnel used to carry the VC."
DEFVAL
{ loose }
::= { cpwVcEntry 7 }
cpwVcPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the address type of the peer node maintenance
protocol (signaling) address if PW maintenance protocol is
used for the VC creation. It should be set to
'unknown' if PE/PW maintenance protocol is not used,
i.e. cpwVcOwner is set to 'manual'. "
DEFVAL { ipv4 }
::= { cpwVcEntry 8 }
cpwVcPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the value of of the peer node address
of the PW/PE maintenance protocol entity. This object
should contain a value of 0 if not relevant (manual
configuration of the VC)."
::= { cpwVcEntry 9 }
cpwVcID OBJECT-TYPE
SYNTAX CpwVcIDType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in the outgoing VC ID field within the 'Virtual
Circuit FEC Element' when LDP signaling is used or PW ID
AVP for L2TP."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>.
and So, et al, <draft-so-pwe3-ethernet>.
Note: as specified in l2circuit-trans: It is REQUIRED to
assign the same VC ID, and VC type for a given circuit in
both directions."
::= { cpwVcEntry 10 }
cpwVcLocalGroupID OBJECT-TYPE
SYNTAX CpwGroupID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for VC setup,
zero if not used."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet.txt>."
::= { cpwVcEntry 11 }
cpwVcControlWord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define if the control word will be sent with each packet by
the local node."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>"
DEFVAL
{ false }
::= { cpwVcEntry 12 }
cpwVcLocalIfMtu OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If not equal zero, the optional IfMtu object in the
maintenance protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
VC."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet>."
DEFVAL
{ 0 }
::= { cpwVcEntry 13 }
cpwVcLocalIfString OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Each VC is associated to an interface (or a virtual
interface) in the ifTable of the node as part of the
service configuration. This object defines if the
maintenance protocol will send the interface's name as
appears on the ifTable in the name object as part of the
maintenance protocol. If set to false, the optional element
will not be sent."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet.txt>."
DEFVAL
{ false }
::= { cpwVcEntry 14 }
cpwVcRemoteGroupID OBJECT-TYPE
SYNTAX CpwGroupID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Obtained from the Group ID field as received via the
maintenance protocol used for VC setup, zero if not used.
Value of 0xFFFF shall be used if the object is yet to be
defined by the VC maintenance protocol."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet.txt>."
::= { cpwVcEntry 15 }
cpwVcRemoteControlWord OBJECT-TYPE
SYNTAX INTEGER {
noControlWord (1),
withControlWord (2),
notYetKnown(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If maintenance protocol is used for VC establishment, this
parameter indicates the received status of the control word
usage, i.e. if packets will be received with control word
or not. The value of 'notYetKnown' is used while the
maintenance protocol has not yet received the indication
from the remote node.
In manual configuration of the VC this parameters indicate
to the local node what is the expected encapsulation for
the received packets.
"
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet.txt>."
::= { cpwVcEntry 16 }
cpwVcRemoteIfMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote interface MTU as (optionally) received from the
remote node via the maintenance protocol. Should be zero if
this parameter is not available or not used."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet.txt>."
::= { cpwVcEntry 17 }
cpwVcRemoteIfString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the interface description string as received by
the maintenance protocol, MUST be NULL string if not
applicable or not known yet."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
and So, et al, <draft-so-pwe3-ethernet>."
::= { cpwVcEntry 18 }
cpwVcOutboundVcLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VC label used in the outbound direction (i.e. toward
the PSN). It may be set up manually if owner is 'manual' or
automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of VC tag, for L2TP it represent the
32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
Townsley, et al, <draft-ietf-l2tpext-l2tp-base.txt>"
::= { cpwVcEntry 19 }
cpwVcInboundVcLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VC label used in the inbound direction (i.e. packets
received from the PSN. It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of VC
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF."
REFERENCE
"Martini, et al, <draft-martini-l2circuit-trans-mpls>
Townsley, et al, <draft-ietf-l2tpext-l2tp-base.txt>"
::= { cpwVcEntry 20 }
cpwVcName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The canonical name assigned to the VC."
::= { cpwVcEntry 21 }
cpwVcDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing information about the VC.
If there is no description this object contains a zero
length string."
::= { cpwVcEntry 22 }
cpwVcCreateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System time when this VC was created."
::= { cpwVcEntry 23 }
cpwVcUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of consecutive ticks this VC has been 'up' in
both directions together (i.e. 'up' is observed in
cpwVcOperStatus.)"
::= { cpwVcEntry 24 }
cpwVcAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired operational status of this VC."
::= { cpwVcEntry 25 }
cpwVcOperStatus OBJECT-TYPE
SYNTAX CpwOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual combined operational status of this
VC. It is 'up' if both cpwVcInboundOperStatus and
cpwVcOutboundOperStatus are in 'up' state. For all other
values, if the VCs in both directions are of the same
value it reflects that value, otherwise it is set to the
most severe status out of the two statuses. The order of
severance from most severe to less severe is: unknown,
notPresent, down, lowerLayerDown, dormant, testing, up.
The operator may consult the per direction OperStatus for
fault isolation per direction."
::= { cpwVcEntry 26 }
cpwVcInboundOperStatus OBJECT-TYPE
SYNTAX CpwOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual operational status of this VC in the
inbound direction.
- down: if PW signaling has not yet finished, or
indications available at the service
level indicate that the VC is not
passing packets.
- testing: if AdminStatus at the VC level is set to
test.
- dormant: The VC is not available because of the
required resources are occupied VC with
higher priority VCs .
- notPresent: Some component is missing to accomplish
the set up of the VC.
- lowerLayerDown: The underlying PSN is not in OperStatus
'up'.
"
::= { cpwVcEntry 27 }
cpwVcOutboundOperStatus OBJECT-TYPE
SYNTAX CpwOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual operational status of this VC in the
outbound direction
- down: if PW signaling has not yet finished, or
indications available at the service
level indicate that the VC is not
passing packets.
- testing: if AdminStatus at the VC level is set to
test.
- dormant: The VC is not available because of the
required resources are occupied VC with
higher priority VCs .
- notPresent: Some component is missing to accomplish
the set up of the VC.
- lowerLayerDown: The underlying PSN is not in OperStatus
'up'.
"
::= { cpwVcEntry 28 }
cpwVcTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the
current interval exceeds the maximum value, the
agent will return the maximum value."
::= { cpwVcEntry 29 }
cpwVcValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous 15-minute intervals
for which data was collected.
An agent with PW capability must be capable of supporting at
least n intervals. The minimum value of n is 4, The default
of n is 32 and the maximum value of n is 96.
The value will be <n> unless the measurement was (re-)
started within the last (<n>*15) minutes, in which case the
value will be the number of complete 15 minute intervals for
which the agent has at least some data. In certain cases
(e.g., in the case where the agent is a proxy) it is
possible that some intervals are unavailable. In this case,
this interval is the maximum interval number for which data
is available. "
::= { cpwVcEntry 30 }
cpwVcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { cpwVcEntry 31 }
cpwVcStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { cpwVcEntry 32 }
-- End of PW Virtual Connection (VC) Table
-- Vc Performance Table.
cpwVcPerfCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcPerfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides per-VC performance information for the
current interval."
::= { cpwVcObjects 3 }
cpwVcPerfCurrentEntry OBJECT-TYPE
SYNTAX CpwVcPerfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for
every VC."
INDEX { cpwVcIndex }
::= { cpwVcPerfCurrentTable 1 }
CpwVcPerfCurrentEntry ::= SEQUENCE {
cpwVcPerfCurrentInHCPackets Counter64,
cpwVcPerfCurrentInHCBytes Counter64,
cpwVcPerfCurrentOutHCBytes Counter64,
cpwVcPerfCurrentOutHCPackets Counter64
}
cpwVcPerfCurrentInHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets received
by the VC (from the PSN) in the current 15 minute
interval."
::= { cpwVcPerfCurrentEntry 1 }
cpwVcPerfCurrentInHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes received
by the VC (from the PSN) in the current 15 minute
interval."
::= { cpwVcPerfCurrentEntry 2 }
cpwVcPerfCurrentOutHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets forwarded
by the VC (to the PSN) in the current 15 minute interval."
::= { cpwVcPerfCurrentEntry 3 }
cpwVcPerfCurrentOutHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes forwarded
by the VC (to the PSN) in the current 15 minute interval."
::= { cpwVcPerfCurrentEntry 4 }
-- End of Vc Perf current Table
-- Vc Performance Interval Table.
cpwVcPerfIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides per-VC performance information for
each interval."
::= { cpwVcObjects 4 }
cpwVcPerfIntervalEntry OBJECT-TYPE
SYNTAX CpwVcPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created agent for every VC."
INDEX { cpwVcIndex, cpwVcPerfIntervalNumber }
::= { cpwVcPerfIntervalTable 1 }
CpwVcPerfIntervalEntry ::= SEQUENCE {
cpwVcPerfIntervalNumber Integer32,
cpwVcPerfIntervalValidData TruthValue,
cpwVcPerfIntervalTimeElapsed Integer32,
cpwVcPerfIntervalInHCPackets Counter64,
cpwVcPerfIntervalInHCBytes Counter64,
cpwVcPerfIntervalOutHCPackets Counter64,
cpwVcPerfIntervalOutHCBytes Counter64
}
cpwVcPerfIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number N, between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval, and the interval identified
by N is the interval immediately preceding the one
identified by N-1.
The minimum range of N is 1 through 4. The default range
is 1 to 32. The maximum range of N is 1 through 96. "
REFERENCE
"Tesink, K. 'Definitions of Managed Objects for the
SONET/SDH Interface Type', RFC 2558"
::= { cpwVcPerfIntervalEntry 1 }
cpwVcPerfIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid."
::= { cpwVcPerfIntervalEntry 2 }
cpwVcPerfIntervalTimeElapsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than the
normal value. Therefore this actual interval value
is provided."
::= { cpwVcPerfIntervalEntry 3 }
cpwVcPerfIntervalInHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets received by
the VC (from the PSN) in a particular 15-minute interval."
::= { cpwVcPerfIntervalEntry 4 }
cpwVcPerfIntervalInHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes received by the
VC (from the PSN) in a particular 15-minute interval."
::= { cpwVcPerfIntervalEntry 5 }
cpwVcPerfIntervalOutHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets forwarded by
the VC (to the PSN) in a particular 15-minute interval."
::= { cpwVcPerfIntervalEntry 6 }
cpwVcPerfIntervalOutHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes forwarded by the
VC (to the PSN) in a particular 15-minute interval."
::= { cpwVcPerfIntervalEntry 7 }
-- End of VC Performance Interval Table
-- VC Performance Total Table.
cpwVcPerfTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcPerfTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides per-VC Performance information from VC
start time."
::= { cpwVcObjects 5 }
cpwVcPerfTotalEntry OBJECT-TYPE
SYNTAX CpwVcPerfTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created agent for every VC."
INDEX { cpwVcIndex }
::= { cpwVcPerfTotalTable 1 }
CpwVcPerfTotalEntry ::= SEQUENCE {
cpwVcPerfTotalInHCPackets Counter64,
cpwVcPerfTotalInHCBytes Counter64,
cpwVcPerfTotalOutHCPackets Counter64,
cpwVcPerfTotalOutHCBytes Counter64,
cpwVcPerfTotalDiscontinuityTime TimeStamp
}
cpwVcPerfTotalInHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets received by the
VC (from the PSN)."
::= { cpwVcPerfTotalEntry 1 }
cpwVcPerfTotalInHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes received by the
VC (from the PSN)."
::= { cpwVcPerfTotalEntry 2 }
cpwVcPerfTotalOutHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets forwarded by
the VC (to the PSN)."
::= { cpwVcPerfTotalEntry 3 }
cpwVcPerfTotalOutHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes forwarded by the
VC (to the PSN)."
::= { cpwVcPerfTotalEntry 4 }
cpwVcPerfTotalDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which any one or more of this row Counter32 or
Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem, then
this object contains a zero value."
::= { cpwVcPerfTotalEntry 5 }
-- End of VC Perf Total Table
-- Error counter scalar
cpwVcPerfTotalErrorPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for number of error at VC level processing, for
example packets received with unknown VC label."
::= { cpwVcObjects 6 }
-- Reverse mapping tables
cpwVcIdMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcIdMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides reverse mapping of the existing VCs
based on vc type and VC ID ordering. This table is
typically useful for EMS ordered query of existing VCs."
::= { cpwVcObjects 7 }
cpwVcIdMappingEntry OBJECT-TYPE
SYNTAX CpwVcIdMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for every
VC configured by the cpwVcTable."
INDEX { cpwVcIdMappingVcType, cpwVcIdMappingVcID,
cpwVcIdMappingPeerAddrType, cpwVcIdMappingPeerAddr,
cpwVcIdMappingVcIndex}
::= { cpwVcIdMappingTable 1 }
CpwVcIdMappingEntry ::= SEQUENCE {
cpwVcIdMappingVcType CpwVcType,
cpwVcIdMappingVcID CpwVcIDType,
cpwVcIdMappingPeerAddrType InetAddressType,
cpwVcIdMappingPeerAddr InetAddress,
cpwVcIdMappingVcIndex CpwVcIndexType
}
cpwVcIdMappingVcType OBJECT-TYPE
SYNTAX CpwVcType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VC type (indicate the service) of this VC."
::= { cpwVcIdMappingEntry 1 }
cpwVcIdMappingVcID OBJECT-TYPE
SYNTAX CpwVcIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VC ID of this VC. Zero if the VC is configured
manually."
::= { cpwVcIdMappingEntry 2 }
cpwVcIdMappingPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address type of the peer node."
::= { cpwVcIdMappingEntry 3 }
cpwVcIdMappingPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address type of the peer node."
::= { cpwVcIdMappingEntry 4 }
cpwVcIdMappingVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that represent the VC in the cpwVcTable."
::= { cpwVcIdMappingEntry 5 }
cpwVcPeerMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcPeerMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides reverse mapping of the existing VCs
based on vc type and VC ID ordering. This table is
typically useful for EMS ordered query of existing VCs."
::= { cpwVcObjects 8 }
cpwVcPeerMappingEntry OBJECT-TYPE
SYNTAX CpwVcPeerMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for every
VC configured in cpwVcTable."
INDEX { cpwVcPeerMappingPeerAddrType, cpwVcPeerMappingPeerAddr,
cpwVcPeerMappingVcType, cpwVcPeerMappingVcID,
cpwVcPeerMappingVcIndex}
::= { cpwVcPeerMappingTable 1 }
CpwVcPeerMappingEntry ::= SEQUENCE {
cpwVcPeerMappingPeerAddrType InetAddressType,
cpwVcPeerMappingPeerAddr InetAddress,
cpwVcPeerMappingVcType CpwVcType,
cpwVcPeerMappingVcID CpwVcIDType,
cpwVcPeerMappingVcIndex CpwVcIndexType
}
cpwVcPeerMappingPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address type of the peer node."
::= { cpwVcPeerMappingEntry 1 }
cpwVcPeerMappingPeerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address type of the peer node."
::= { cpwVcPeerMappingEntry 2 }
cpwVcPeerMappingVcType OBJECT-TYPE
SYNTAX CpwVcType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VC type (indicate the service) of this VC."
::= { cpwVcPeerMappingEntry 3 }
cpwVcPeerMappingVcID OBJECT-TYPE
SYNTAX CpwVcIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VC ID of this VC. Zero if the VC is configured
manually."
::= { cpwVcPeerMappingEntry 4 }
cpwVcPeerMappingVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that represent the VC in the cpwVcTable."
::= { cpwVcPeerMappingEntry 5 }
-- End of reverse mapping tables
cpwVcUpDownNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of cpwVcUp and cpwVcDown
notifications; otherwise these notifications are not
emitted."
REFERENCE
"See also RFC3413 for explanation that
notifications are under the ultimate control of the
MIB modules in this document."
DEFVAL { false }
::= { cpwVcObjects 9 }
cpwVcNotifRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the maximum number of PW VC notifications
that can be emitted from the device per second."
::= { cpwVcObjects 10 }
-- Notifications - PW VCs
cpwVcDown NOTIFICATION-TYPE
OBJECTS { cpwVcOperStatus, --start of range
cpwVcOperStatus --end of range
}
STATUS current
DESCRIPTION
"This notification is generated when the
cpwVcOperStatus object for one or more contiguous
entries in cpwVcTable are about to enter the
down(2) state from some other state. The included values
of cpwVcOperStatus MUST all be set equal to this
down(2) state. The two instances of cpwVcOperStatus
in this notification indicate the range of indexes
that are affected. Note that all the indexes of the
two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the down(2) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
cpwVcOperStatus objects MUST be identical."
::= { cpwVcNotifications 1 }
cpwVcUp NOTIFICATION-TYPE
OBJECTS { cpwVcOperStatus, --start of range
cpwVcOperStatus --end of range
}
STATUS current
DESCRIPTION
"This notification is generated when the
cpwVcOperStatus object for one or more contiguous
entries in cpwVcTable are about to enter the up(1)
state from some other state. The included values of
cpwVcOperStatus MUST both be set equal to this
new state (i.e: up(1)). The two instances of
cpwVcOperStatus in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the up(1) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
cpwVcOperStatus objects MUST be the identical."
::= { cpwVcNotifications 2 }
-- End of notifications.
-- conformance information
-- Note: Conformance at the object access and values level is
-- still FFS, therefore current conformance is defined at the
-- object existence level only.
cpwVcGroups OBJECT IDENTIFIER ::= { cpwVcConformance 1 }
cpwVcCompliances OBJECT IDENTIFIER ::= { cpwVcConformance 2 }
cpwModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agent that support PW
operation."
MODULE -- this module
MANDATORY-GROUPS { cpwVcGroup,
cpwVcPeformanceGroup }
::= { cpwVcCompliances 1 }
-- Units of conformance.
cpwVcGroup OBJECT-GROUP
OBJECTS {
cpwVcIndexNext,
cpwVcType,
cpwVcOwner,
cpwVcPsnType,
cpwVcSetUpPriority,
cpwVcHoldingPriority,
cpwVcInboundMode,
cpwVcPeerAddrType,
cpwVcPeerAddr,
cpwVcID,
cpwVcLocalGroupID,
cpwVcControlWord,
cpwVcLocalIfMtu,
cpwVcLocalIfString,
cpwVcRemoteGroupID,
cpwVcRemoteControlWord,
cpwVcRemoteIfMtu,
cpwVcRemoteIfString,
cpwVcOutboundVcLabel,
cpwVcInboundVcLabel,
cpwVcName,
cpwVcDescr,
cpwVcCreateTime,
cpwVcUpTime,
cpwVcAdminStatus,
cpwVcOperStatus,
cpwVcOutboundOperStatus,
cpwVcInboundOperStatus,
cpwVcTimeElapsed,
cpwVcValidIntervals,
cpwVcRowStatus,
cpwVcStorageType,
cpwVcUpDownNotifEnable,
cpwVcNotifRate
}
STATUS current
DESCRIPTION
"Collection of objects needed for PW VC
configuration."
::= { cpwVcGroups 1 }
cpwVcPeformanceGroup OBJECT-GROUP
OBJECTS {
cpwVcPerfCurrentInHCPackets,
cpwVcPerfCurrentInHCBytes,
cpwVcPerfCurrentOutHCPackets,
cpwVcPerfCurrentOutHCBytes,
cpwVcPerfIntervalValidData,
cpwVcPerfIntervalTimeElapsed,
cpwVcPerfIntervalInHCPackets,
cpwVcPerfIntervalInHCBytes,
cpwVcPerfIntervalOutHCPackets,
cpwVcPerfIntervalOutHCBytes,
cpwVcPerfTotalInHCPackets,
cpwVcPerfTotalInHCBytes,
cpwVcPerfTotalOutHCPackets,
cpwVcPerfTotalOutHCBytes,
cpwVcPerfTotalDiscontinuityTime,
cpwVcPerfTotalErrorPackets
}
STATUS current
DESCRIPTION
"Collection of objects needed for PW VC
performance."
::= { cpwVcGroups 2 }
cpwVcMappingTablesGroup OBJECT-GROUP
OBJECTS {
cpwVcIdMappingVcIndex,
cpwVcPeerMappingVcIndex
}
STATUS current
DESCRIPTION
"Collection of objects contained in the reverse
mapping tables."
::= { cpwVcGroups 3 }
cpwVcNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cpwVcUp,
cpwVcDown
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this module.
None is mandatory."
::= { cpwVcGroups 4 }
END
Reference in a new issue View git blame Copy permalink