Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
618 lines
21 KiB
Text
618 lines
21 KiB
Text
-- *****************************************************************
|
|
-- CISCO-HSRP-EXT-MIB
|
|
--
|
|
-- Jan 2010, Sreenadh Gaddam
|
|
-- Copyright (c) 1998-2005, 2009-2010 by cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-HSRP-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
IpAddress,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
ifIndex,
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
cHsrpGrpNumber
|
|
FROM CISCO-HSRP-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoHsrpExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201009020000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-hsrp@cisco.com"
|
|
DESCRIPTION
|
|
"The Extension MIB module for the CISCO-HSRP-MIB which is
|
|
based on RFC2281.
|
|
|
|
This MIB provides an extension to the CISCO-HSRP-MIB which
|
|
defines Cisco's proprietary Hot Standby Routing Protocol
|
|
(HSRP), defined in RFC2281. The extensions cover assigning
|
|
of secondary HSRP ip addresses, modifying an HSRP Group's
|
|
priority by tracking the operational status of interfaces,
|
|
etc.
|
|
|
|
Terminology:
|
|
HSRP is a protocol used amoung a group of routers for the
|
|
purpose of selecting an active router and a standby router.
|
|
|
|
An active router is the router of choice for routing
|
|
packets.
|
|
|
|
A standby router is a router that takes over the routing
|
|
duties when an active router fails, or when preset
|
|
conditions have been met.
|
|
|
|
A HSRP group or a standby group is a set of routers
|
|
which communicate using HSRP. An HSRP group has a group
|
|
MAC address and a group IP address. These are the
|
|
designated addresses. The active router assumes
|
|
(i.e. inherits) these group addresses. An HSRP group is
|
|
identified by a ( ifIndex, cHsrpGrpNumber ) pair.
|
|
|
|
BIA stands for Burned In Address."
|
|
REVISION "201009020000Z"
|
|
DESCRIPTION
|
|
"The following changes have been made.
|
|
|
|
[1] Objects cHsrpExtIfTrackedIpNone has been deprecated.
|
|
|
|
[2] Deprecates object group cHsrpExtIfTrackedGroupSup1, which
|
|
supplementary to cHsrpExtIfTrackedGroup.
|
|
|
|
|
|
[3] Added new compliance cHsrpExtComplianceRev2, which
|
|
deprecates cHsrpExtComplianceRev1."
|
|
REVISION "201002050000Z"
|
|
DESCRIPTION
|
|
"Added cHsrpExtIfTrackedIpNone to
|
|
cHsrpExtIfTrackedTable
|
|
|
|
Added new table cHsrpExtIfStandbyTable.
|
|
|
|
Added OBJECT-GROUP cHsrpExtIfStandbyGroup91.
|
|
|
|
Added OBJECT-GROUP cHsrpExtIfTrackedGroupSup1, which
|
|
supplementary to cHsrpExtIfTrackedGroup.
|
|
|
|
Added MODULE-COMPLIANCE cHsrpExtComplianceRev1, which
|
|
deprecates cHsrpExtCompliance."
|
|
REVISION "200602150000Z"
|
|
DESCRIPTION
|
|
"Updated the imports such that Unsigned32 is imported from
|
|
SNMPv2-SMI instead of CISCO-TC. Updated the module
|
|
description. Also updated the descriptions of
|
|
cHsrpExtIfTrackedEntry and cHsrpExtIfTracked. Formatted the
|
|
complete MIB."
|
|
REVISION "9808030000Z"
|
|
DESCRIPTION
|
|
"Initial version of this mib."
|
|
::= { ciscoMgmt 107 }
|
|
|
|
|
|
ciscoHsrpExtMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIB 1 }
|
|
|
|
-- HSRP Extension Tables
|
|
-- Extention group info
|
|
|
|
cHsrpExtGroup OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIBObjects 1 }
|
|
|
|
-- Interface Use Burned-In Address state
|
|
|
|
cHsrpExtIfBIA OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIBObjects 2 }
|
|
|
|
|
|
cHsrpExtIfTrackedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtIfTrackedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information about tracked interfaces per
|
|
HSRP group."
|
|
::= { cHsrpExtGroup 1 }
|
|
|
|
cHsrpExtIfTrackedEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtIfTrackedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row of this table allows the tracking of one
|
|
interface of the HSRP group which is identified by the
|
|
(ifIndex, cHsrpGrpNumber) values in this table's INDEX clause.
|
|
Weight(priority) is given to each and every interface tracked.
|
|
When a tracked interface is unavailable, the HSRP priority of
|
|
the router is decreased. i.e cHsrpGrpPriority value assigned
|
|
to an HSRP group will reduce by the value assigned to
|
|
cHsrpExtIfTrackedPriority. This reduces the likelihood
|
|
of a router with a failed key interface becoming the
|
|
active router.
|
|
|
|
Setting cHsrpExtIfTrackedRowStatus to active starts
|
|
the tracking of cHsrpExtIfTracked by the HSRP group.
|
|
The value of cHsrpExtIfTrackedRowStatus may be set
|
|
to destroy at any time.
|
|
|
|
Entries may not be created via SNMP without explicitly setting
|
|
cHsrpExtIfTrackedRowStatus to either 'createAndGo'
|
|
or 'createAndWait'.
|
|
|
|
Entries can be created and modified via the management
|
|
protocol or by the device's local management interface.
|
|
|
|
If the row is not active, and a local management interface
|
|
command modifies that row, the row may transition to active
|
|
state.
|
|
|
|
A row entry in the cHsrpExtIfTrackedTable can not be created
|
|
unless the corresponding row in the cHsrpGrpTable has been
|
|
created. If that corresponding row in cHsrpGrpTable is
|
|
deleted, the interfaces it tracks also get deleted.
|
|
|
|
A row which is not in active state will timeout after a
|
|
configurable period (five minutes by default). This timeout
|
|
period can be changed by setting cHsrpConfigTimeout."
|
|
INDEX {
|
|
ifIndex,
|
|
cHsrpGrpNumber,
|
|
cHsrpExtIfTracked
|
|
}
|
|
::= { cHsrpExtIfTrackedTable 1 }
|
|
|
|
CHsrpExtIfTrackedEntry ::= SEQUENCE {
|
|
cHsrpExtIfTracked InterfaceIndex,
|
|
cHsrpExtIfTrackedPriority Unsigned32,
|
|
cHsrpExtIfTrackedRowStatus RowStatus,
|
|
cHsrpExtIfTrackedIpNone TruthValue
|
|
}
|
|
|
|
cHsrpExtIfTracked OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the tracked interface."
|
|
::= { cHsrpExtIfTrackedEntry 1 }
|
|
|
|
cHsrpExtIfTrackedPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority of the tracked interface for the corresponding
|
|
{ ifIndex, cHsrpGrpNumber } pair. In the range of 0 to 255, 0
|
|
is the lowest priority and 255 is the highest. When a tracked
|
|
interface is unavailable, the cHsrpGrpPriority of the router
|
|
is decreased by the value of this object instance (If the
|
|
cHsrpGrpPriority is less than the
|
|
cHsrpExtIfTrackedPriority, then the HSRP priority
|
|
becomes 0). This allows a standby router to be configured
|
|
with a priority such that if the currently active router's
|
|
priority is lowered because the tracked interface goes down,
|
|
the standby router can takeover."
|
|
DEFVAL { 0 }
|
|
::= { cHsrpExtIfTrackedEntry 2 }
|
|
|
|
cHsrpExtIfTrackedRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation, and deletion
|
|
of entries. For detailed rules see the DESCRIPTION for
|
|
cHsrpExtIfTrackedEntry."
|
|
::= { cHsrpExtIfTrackedEntry 3 }
|
|
|
|
cHsrpExtIfTrackedIpNone OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the disable HSRP IPv4 virtual
|
|
IP address."
|
|
DEFVAL { false }
|
|
::= { cHsrpExtIfTrackedEntry 4 }
|
|
|
|
|
|
|
|
cHsrpExtSecAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtSecAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information about secondary HSRP IP
|
|
Addresses per interface and group."
|
|
::= { cHsrpExtGroup 2 }
|
|
|
|
cHsrpExtSecAddrEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtSecAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CHsrpExtSecAddrEntry allows creation of secondary
|
|
IP Addresses for each cHsrpGrpEntry row.
|
|
|
|
Secondary addresses can be added by setting
|
|
cHsrpExtSecAddrRowStatus to be active. The value of
|
|
cHsrpExtSecAddrRowStatus may be set to destroy at any
|
|
time.
|
|
|
|
Entries may not be created via SNMP without explicitly setting
|
|
cHsrpExtSecAddrRowStatus to either 'createAndGo'
|
|
or 'createAndWait'.
|
|
|
|
Entries can be created and modified via the management
|
|
protocol or by the device's local management interface.
|
|
|
|
If the row is not active, and a local management interface
|
|
command modifies that row, the row may transition to active
|
|
state.
|
|
|
|
A row which is not in active state will timeout after a
|
|
configurable period (five minutes by default). This timeout
|
|
period can be changed by setting cHsrpConfigTimeout.
|
|
|
|
Before creation of a cHsrpExtSecAddrEntry row,
|
|
either cHsrpGrpConfiguredVirtualIpAddr or
|
|
cHsrpGrpLearnedVirtualIpAddr must have a valid IP Address.
|
|
This is because a secondary ip address cannot be created
|
|
unless the primary ip address has already been set.
|
|
|
|
To create a new cHsrpExtSecAddrEntry row, a management
|
|
station should choose the ifIndex of the interface which is to
|
|
be added as part of an HSRP group. Also, an HSRP group number
|
|
and a cHsrpExtSecAddrAddress should be chosen.
|
|
|
|
Deleting a {ifIndex, cHsrpGrpNumber} row in the
|
|
cHsrpGrpTable will delete all corresponding
|
|
rows in the cHsrpExtSecAddrTable.
|
|
Deleting a primary address value in the cHsrpGrpEntry row
|
|
will delete all secondary addresses for the same
|
|
{ifIndex, cHsrpGrpNumber} pair."
|
|
INDEX {
|
|
ifIndex,
|
|
cHsrpGrpNumber,
|
|
cHsrpExtSecAddrAddress
|
|
}
|
|
::= { cHsrpExtSecAddrTable 1 }
|
|
|
|
CHsrpExtSecAddrEntry ::= SEQUENCE {
|
|
cHsrpExtSecAddrAddress IpAddress,
|
|
cHsrpExtSecAddrRowStatus RowStatus
|
|
}
|
|
|
|
cHsrpExtSecAddrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A secondary IpAddress for the {ifIndex, cHsrpGrpNumber} pair.
|
|
As explained in the DESCRIPTION for cHsrpExtSecAddrEntry, a
|
|
primary address must exist before a secondary address for
|
|
the same {ifIndex, cHsrpGrpNumber} pair can be created."
|
|
::= { cHsrpExtSecAddrEntry 1 }
|
|
|
|
cHsrpExtSecAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation, and deletion
|
|
of entries. For detailed rules see the DESCRIPTION for
|
|
cHsrpExtSecAddrEntry."
|
|
::= { cHsrpExtSecAddrEntry 2 }
|
|
|
|
|
|
|
|
cHsrpExtIfStandbyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtIfStandbyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information about standby
|
|
interfaces per HSRP group."
|
|
::= { cHsrpExtGroup 3 }
|
|
|
|
cHsrpExtIfStandbyEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtIfStandbyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cHsrpExtIfStandbyEntry allows an HSRP group
|
|
interface to track one or more standby interfaces.
|
|
|
|
To create a new cHsrpExtIfStandbyEntry row, a
|
|
management station should choose the ifIndex of
|
|
the interface which is to be added as part of an
|
|
HSRP group. Also, an HSRP group number and a
|
|
cHsrpExtIfStandbyIndex should be chosen."
|
|
INDEX {
|
|
ifIndex,
|
|
cHsrpGrpNumber,
|
|
cHsrpExtIfStandbyIndex
|
|
}
|
|
::= { cHsrpExtIfStandbyTable 1 }
|
|
|
|
CHsrpExtIfStandbyEntry ::= SEQUENCE {
|
|
cHsrpExtIfStandbyIndex Unsigned32,
|
|
cHsrpExtIfStandbyDestAddrType InetAddressType,
|
|
cHsrpExtIfStandbyDestAddr InetAddress,
|
|
cHsrpExtIfStandbySourceAddrType InetAddressType,
|
|
cHsrpExtIfStandbySourceAddr InetAddress,
|
|
cHsrpExtIfStandbyRowStatus RowStatus
|
|
}
|
|
|
|
cHsrpExtIfStandbyIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the index of the standby table."
|
|
::= { cHsrpExtIfStandbyEntry 1 }
|
|
|
|
cHsrpExtIfStandbyDestAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of Internet address
|
|
denoted by cHsrpExtIfStandbyDestAddr."
|
|
::= { cHsrpExtIfStandbyEntry 2 }
|
|
|
|
cHsrpExtIfStandbyDestAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the destination IP address of
|
|
the standby router."
|
|
::= { cHsrpExtIfStandbyEntry 3 }
|
|
|
|
cHsrpExtIfStandbySourceAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of Internet address
|
|
denoted by cHsrpExtIfStandbySourceAddr."
|
|
::= { cHsrpExtIfStandbyEntry 4 }
|
|
|
|
cHsrpExtIfStandbySourceAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the source IP address of
|
|
the standby router."
|
|
::= { cHsrpExtIfStandbyEntry 5 }
|
|
|
|
cHsrpExtIfStandbyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation,
|
|
and deletion of entries. Entries may not be created
|
|
via SNMP without explicitly setting
|
|
cHsrpExtIfStandbyRowStatus to either
|
|
'createAndGo' or 'createAndWait'."
|
|
::= { cHsrpExtIfStandbyEntry 6 }
|
|
|
|
|
|
|
|
cHsrpExtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HSRP-specific configurations for each physical interface."
|
|
::= { cHsrpExtIfBIA 1 }
|
|
|
|
cHsrpExtIfEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If HSRP entries on this interface must use the BIA (Burned
|
|
In Address), there must be an entry for the interface in this
|
|
table. Entries of this table are only accessible if HSRP has
|
|
been enabled i.e entries can not be created if HSRP is not
|
|
enabled. Also, the interfaces should be of IEEE 802 ones
|
|
(Ethernet, Token Ring, FDDI,VLAN, LANE, TR-LANE).
|
|
|
|
Setting cHsrpExtIfRowStatus to active initiates the
|
|
entry with default value for cHsrpExtIfUseBIA as FALSE.
|
|
The value of cHsrpExtIfRowStatus may be set to destroy
|
|
at any time. If the row is not initiated, it is similar to
|
|
having cHsrpExtIfUseBIA as FALSE.
|
|
|
|
Entries may not be created via SNMP without explicitly setting
|
|
cHsrpExtIfRowStatus to either 'createAndGo' or 'createAndWait'.
|
|
|
|
Entries can be created and modified via the management
|
|
protocol or by the device's local management interface.
|
|
|
|
If the row is not active, and a local management interface
|
|
command modifies that row, the row may transition to active
|
|
state.
|
|
|
|
A row which is not in active state will timeout after a
|
|
configurable period (five minutes by default). This timeout
|
|
period can be changed by setting cHsrpConfigTimeout."
|
|
INDEX { ifIndex }
|
|
::= { cHsrpExtIfTable 1 }
|
|
|
|
CHsrpExtIfEntry ::= SEQUENCE {
|
|
cHsrpExtIfUseBIA TruthValue,
|
|
cHsrpExtIfRowStatus RowStatus
|
|
}
|
|
|
|
cHsrpExtIfUseBIA OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to TRUE, the HSRP Group MAC Address for all groups
|
|
on this interface will be the burned-in-address. Otherwise,
|
|
this will be determined by ciscoHsrpGroupNumber. In case of
|
|
sub-interfaces, UseBIA applies to all sub-interfaces on an
|
|
interface and to all groups on those sub-interfaces."
|
|
DEFVAL { false }
|
|
::= { cHsrpExtIfEntry 1 }
|
|
|
|
cHsrpExtIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation, and deletion
|
|
of entries. For detailed rules see the DESCRIPTION for
|
|
cHsrpExtIfEntry."
|
|
::= { cHsrpExtIfEntry 2 }
|
|
|
|
|
|
-- Notifications
|
|
-- None
|
|
--
|
|
-- Conformance groups
|
|
|
|
cHsrpExtConformance OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIB 3 }
|
|
|
|
cHsrpExtCompliances OBJECT IDENTIFIER
|
|
::= { cHsrpExtConformance 1 }
|
|
|
|
cHsrpExtComplianceGroups OBJECT IDENTIFIER
|
|
::= { cHsrpExtConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
cHsrpExtCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the CISCO-HSRP-EXT-MIB. This is deprecated by
|
|
cHsrpExtComplianceRev1."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cHsrpExtIfTrackedGroup,
|
|
cHsrpExtSecAddrGroup,
|
|
cHsrpExtIfGroup
|
|
}
|
|
::= { cHsrpExtCompliances 1 }
|
|
|
|
cHsrpExtComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"the compliance statement for entities which implement
|
|
the CISCO-HSRP-EXT-MIB.This is deprecated by
|
|
cHsrpExtComplianceRev2."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cHsrpExtIfTrackedGroup,
|
|
cHsrpExtSecAddrGroup,
|
|
cHsrpExtIfGroup,
|
|
cHsrpExtIfStandbyGroup91,
|
|
cHsrpExtIfTrackedGroupSup1
|
|
}
|
|
::= { cHsrpExtCompliances 2 }
|
|
|
|
cHsrpExtComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the compliance statement for entities which implement
|
|
the CISCO-HSRP-EXT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cHsrpExtIfTrackedGroup,
|
|
cHsrpExtSecAddrGroup,
|
|
cHsrpExtIfGroup,
|
|
cHsrpExtIfStandbyGroup91
|
|
}
|
|
::= { cHsrpExtCompliances 3 }
|
|
|
|
cHsrpExtIfTrackedGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cHsrpExtIfTrackedPriority,
|
|
cHsrpExtIfTrackedRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects used to add, delete and retrieve
|
|
the interfaces getting tracked for HSRP groups."
|
|
::= { cHsrpExtComplianceGroups 1 }
|
|
|
|
cHsrpExtSecAddrGroup OBJECT-GROUP
|
|
OBJECTS { cHsrpExtSecAddrRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects used to add, delete and retrieve
|
|
primary and secondary Ip Addresses for HSRP groups."
|
|
::= { cHsrpExtComplianceGroups 2 }
|
|
|
|
cHsrpExtIfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cHsrpExtIfUseBIA,
|
|
cHsrpExtIfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which tells if HSRP entries on this interface must
|
|
use BIA or not."
|
|
::= { cHsrpExtComplianceGroups 3 }
|
|
|
|
cHsrpExtIfStandbyGroup91 OBJECT-GROUP
|
|
OBJECTS {
|
|
cHsrpExtIfStandbyDestAddrType,
|
|
cHsrpExtIfStandbyDestAddr,
|
|
cHsrpExtIfStandbySourceAddrType,
|
|
cHsrpExtIfStandbySourceAddr,
|
|
cHsrpExtIfStandbyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects used to add, delete and
|
|
retrieve the interfaces getting standby for
|
|
HSRP groups."
|
|
::= { cHsrpExtComplianceGroups 4 }
|
|
|
|
cHsrpExtIfTrackedGroupSup1 OBJECT-GROUP
|
|
OBJECTS { cHsrpExtIfTrackedIpNone }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The collection of HSRP interface tracked objects
|
|
which suppliments cHsrpExtIfTrackedGroup."
|
|
::= { cHsrpExtComplianceGroups 5 }
|
|
|
|
END
|
|
|
|
|
|
|