graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/cisco/CISCO-ENTITY-FRU-CONTROL-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

3601 lines
119 KiB
Text
Raw Permalink Blame History

-- *****************************************************************
-- CISCO-ENTITY-FRU-CONTROL-MIB
--
-- October 2002, Srini Kode
--
-- %DNP% October 2003, Wen Xu
-- %DNP% November 2003, Vasanta Kottapalli
--
-- Copyright (c) 1998-2018 by cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-ENTITY-FRU-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
TimeStamp,
TruthValue
FROM SNMPv2-TC
entPhysicalIndex,
entPhysicalContainedIn,
entPhysicalModelName,
entPhysicalClass,
entPhysicalVendorType,
entPhysicalName
FROM ENTITY-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoEntityFRUControlMIB MODULE-IDENTITY
LAST-UPDATED "201811050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 408 526 4000
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor
and configure operational status of
Field Replaceable Units (FRUs) and other managable
physical entities of the system listed in the
Entity-MIB (RFC 2737) entPhysicalTable.
FRUs include assemblies such as power supplies, fans,
processor modules, interface modules, etc."
REVISION "201811050000Z"
DESCRIPTION
"Corrected MAX-ACCESS of cefcFRUActualInputCurrent
and cefcFRUActualOutputCurrent."
REVISION "201808200000Z"
DESCRIPTION
"Added CefcVmModuleOperType Textual Convention.
Added following OBJECT-GROUP
- cefcVmModuleGroup
- cefcVmModuleNotifsGroup
Added cefcMIBPowerCompliance10"
REVISION "201807250000Z"
DESCRIPTION
"Added following OBJECT-GROUP
- cefcPowerSupplyActualGroup"
REVISION "201712060000Z"
DESCRIPTION
"Added following OBJECT-GROUP
- cefcFanDirectionGroup
- cefcFanSpeedGroup"
REVISION "201308190000Z"
DESCRIPTION
"Added fwMismatchFound(25), fwDownloadSuccess(26)
and fwDownloadFailure(27) to the
Textual Convention ModuleOperType"
REVISION "201112220000Z"
DESCRIPTION
"Added new enumeration value mdr(24) to
ModuleOperType Textual Convention."
REVISION "201103180000Z"
DESCRIPTION
"Added FRUCoolingUnit Textual Convention.
Added psRedundantSingleInput(7) to Textual
Convention PowerRedundancyType.
Added the following groups:
cefcFRUPowerRealTimeStatusGroup
cefcFRUPowerCapabilityGroup
cefcFRUCoolingUnitGroup
cefcFRUFanCoolingUnitGroup
Deprecated cefcCoolingGroup and replaced with
cefcCoolingGroup2 and cefcFanCoolingGroup."
REVISION "201012100000Z"
DESCRIPTION
"Added cefcMIBModuleLocalSwitchingGroup."
REVISION "200810080000Z"
DESCRIPTION
"Added two new enumeration values
upgrading(22) and okButAuthFailed(23) to
ModuleOperType Textual Convention."
REVISION "200706210000Z"
DESCRIPTION
"* Added two new enumeration values :
psRedundant(5) and inPwrSrcRedundant(6) to
PowerRedundancyType Textual Convention."
REVISION "200703140000Z"
DESCRIPTION
"* Added cefcTotalDrawnInlineCurrent and
cefcMIBInLinePowerCurrentGroup.
* Added cefcPowerNonRedundantReason and
cefcMIBPowerRedundancyInfoGroup.
* Added cefcFanCoolingCapTable and
cefcFanCoolingCapGroup.
* Added cefcMIBPowerCompliance8."
REVISION "200606230000Z"
DESCRIPTION
"* Added new value 'onButInlinePowerFail(12)' to PowerOperType."
REVISION "200509060000Z"
DESCRIPTION
"* Added cefcPowerCapacityGroup,
cefcCoolingGroup and cefcConnectorRatingGroup.
* Added new enumerator 'powerCycle' to the TC
PowerAdminType.
* Added two new enumerators 'offCooling'
and 'offConnectorRating' to the TC PowerOperType.
* Added cefcMIBNotificationEnablesGroup2
and cefcMgmtNotificationsGroup3."
REVISION "200412090000Z"
DESCRIPTION
"Removed the additional varbind 'entPhysicalDescr' added
in 'cefcFRUInserted' & 'cefcFRURemoved' notifications."
REVISION "200410190000Z"
DESCRIPTION
"* Added the enumeration 'syncInProgress' to
ModuleOperType Textual Convention.
Added an additional varbind 'entPhysicalDescr' in
'cefcFRUInserted' & 'cefcFRURemoved' notifications."
REVISION "200311240000Z"
DESCRIPTION
"* Added the enumerations okButPowerOverWarning
and okButPowerOverCritical to ModuleOperType
Textual Convention."
REVISION "200310270000Z"
DESCRIPTION
"Added poweredDown,poweredUp, powerDenied,powerCycled
to ModuleOperType."
REVISION "200310230000Z"
DESCRIPTION
"* Added cefcModuleStateChangeReasonDescr and
cefcModuleUpTime in the cefcModuleTable.
* Added cefcIntelliModuleTable to provide the
IP address information for intelligent
modules."
REVISION "200307220000Z"
DESCRIPTION
"* Modified the description for cefcPowerRedudancyMode to
indicate that this object reflects the administrative
power supply redundancy mode.
* Added cefcPowerRedundancyOperMode to reflect the
operational status of the power supply redundancy mode.
* Deprecated cefcMaxDefaultInLinePower and added
cefcMaxDefaultHighInLinePower to replace it.
* Modified the DESCRIPTION for cefcFanTrayStatusTable
and cefcFanTrayStatusEntry to reflect the right
situation."
REVISION "200210160000Z"
DESCRIPTION
"Added:
* Added cefcFanTrayStatusChange notification
* Added cefcFanTrayStatusChange to
cefcMgmtNotificationsGroup2"
REVISION "200210030000Z"
DESCRIPTION
"Added:
* cefcFanTrayStatus table containing fan tray status
information.
* added cefcPhysical table containing status information
of the physical entity.
* added cefcUnrecognizedFRU notification.
* added cefcMIBFanTrayStatusGroup.
* added cefcMIBPhysicalGroup."
REVISION "200209150000Z"
DESCRIPTION
"Added:
* powerSupplyValue table containing information such
as, total and used inline and data power, for variable
power supplies.
* added following object group
cefcMIBPowerFRUValueGroup"
REVISION "200207120000Z"
DESCRIPTION
"Added:
cefcModuleLastClearConfigTime
cefcModuleResetReasonDescription
cefcModuleGroupRev1
Modified:
Added enumerations watchDogTimeoutReset,
resourceOverflowReset, missingTaskReset,
lowVoltageReset, controllerReset, systemReset,
switchoverReset, upgradeReset, downgradeReset,
cacheErrorReset, deviceDriverReset,
softwareExceptionReset, restoreConfigReset,
abortRevReset, burnBootReset,
standbyCdHealthierReset, nonNativeConfigClearReset,
and memoryProtectionErrorReset to
ModuleResetReasonType TC."
REVISION "200105220000Z"
DESCRIPTION
"Modified the description for cefcTotalAvailableCurrent.
Changed 'cefcPowerRedundancy' in the description to
'cefcPowerRedundancyMode'
Also made the file conform to the 72 char line limit.
Imported NOTIFICATION-GROUP
Added cefcMgmtNotificationsGroup."
REVISION "200001130000Z"
DESCRIPTION
"Following changes are made in this revision
* added following enumerations to ModuleOperType TC:
dormant, outOfServiceAdmin, outOfServiceEnvTemp
* added outOfServiceAdmin to ModuleAdminType TC
* added following notifications:
cefcMIBNotificationEnables
cefcMIBEnableStatusNotification
cefcPowerStatusChange
cefcFRUInserted
cefcFRURemoved
* added following object groups:
cefcMIBInLinePowerControlGroup
cefcMIBNotificationEnablesGroup"
REVISION "9904050000Z"
DESCRIPTION
"Added module table containing the status information."
::= { ciscoMgmt 117 }
cefcMIBObjects OBJECT IDENTIFIER
::= { ciscoEntityFRUControlMIB 1 }
cefcFRUMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoEntityFRUControlMIB 2 }
cefcMIBConformance OBJECT IDENTIFIER
::= { ciscoEntityFRUControlMIB 3 }
-- textual conventions
PowerRedundancyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"power supply redundancy modes. valid values are:
notsupported(1): Read-only operational state, indicates
that the requested administrative state (redundant(2),
combined(3), psRedundant(5), inPwrSrcRedundant(6)
or psRedundantSingleInput(7)) is not supported
by the system.
redundant(2): A single power supply output can power
the entire system, although there are more than
one matched supply in the system.
In the systems which support multiple level of
redundancy, such as input power redundancy, this
state indicates that redundancy is enabled on
all levels.
combined(3): The combined output of the power supplies
are available to operate the system when there are
more than one matched power supply in the system.
In the platforms which support multiple level of
redundancy, such as input redundancy, this state
indicates that no redundancy on all levels.
nonRedundant(4): Read-only operational state, indicates
that there is only one power supply or there are
unmatched power supplies in the system.
psRedundant(5): Only the power output redundancy
is enabled in the systems which support multiple
levels of redundancy. All other types of redundancy,
such as input power redundancy, are disabled.
This value is only supported by the systems which
support multiple levels of redundancy.
inPwrSrcRedundant(6): Only the input power redundancy
is enabled in the systems which support multiple
levels of redundancy. All other types of redundancy,
such as output power redundancy, are disabled.
This value is only supported by the systems which
support input power redundancy.
psRedundantSingleInput(7): Only the power redundancy with
single input is enabled in the systems which support
multiple levels of redundancy. All other types of
redundancy, such as output power redundancy, are disabled.
This value is only supported by the systems which
support power redundancy with single input."
SYNTAX INTEGER {
notsupported(1),
redundant(2),
combined(3),
nonRedundant(4),
psRedundant(5),
inPwrSrcRedundant(6),
psRedundantSingleInput(7)
}
PowerAdminType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Administratively desired FRU power state types. valid values
are:
on(1): Turn FRU on.
off(2): Turn FRU off.
The inline power means that the FRU itself won't cost any power,
but the external device connecting to the FRU will drain the
power from FRU. For example, the IP phone device. The FRU is a
port of a switch with voice ability and IP phone will cost power
from the port once it connects to the port.
inlineAuto(3): Turn FRU inline power to auto mode. It means that
the FRU will try to detect whether the connecting device needs
power or not. If it needs power, the FRU will supply power. If
it doesn't, the FRU will treat the device as a regular network
device.
inlineOn(4): Turn FRU inline power to on mode. It means that
once the device connects to the FRU, the FRU will always supply
power to the device no matter the device needs the power or not.
powerCycle(5): Power cycle the FRU. This value may be specified
in a management protocol set operation, it will not be returned
in response to a management protocol retrieval operation."
SYNTAX INTEGER {
on(1),
off(2),
inlineAuto(3),
inlineOn(4),
powerCycle(5)
}
PowerOperType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational FRU Status types. valid values are:
offEnvOther(1) FRU is powered off because of a problem not
listed below.
on(2): FRU is powered on.
offAdmin(3): Administratively off.
offDenied(4): FRU is powered off because available
system power is insufficient.
offEnvPower(5): FRU is powered off because of power problem in
the FRU. for example, the FRU's power
translation (DC-DC converter) or distribution
failed.
offEnvTemp(6): FRU is powered off because of temperature
problem.
offEnvFan(7): FRU is powered off because of fan problems.
failed(8): FRU is in failed state.
onButFanFail(9): FRU is on, but fan has failed.
offCooling(10): FRU is powered off because of the system's
insufficient cooling capacity.
offConnectorRating(11): FRU is powered off because of the
system's connector rating exceeded.
onButInlinePowerFail(12): The FRU on, but no inline power
is being delivered as the
data/inline power component of the
FRU has failed."
SYNTAX INTEGER {
offEnvOther(1),
on(2),
offAdmin(3),
offDenied(4),
offEnvPower(5),
offEnvTemp(6),
offEnvFan(7),
failed(8),
onButFanFail(9),
offCooling(10),
offConnectorRating(11),
onButInlinePowerFail(12)
}
FRUCurrentType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a current measurement, on the system power supply
primary output, expressed in cefcPowerUnits. Range is
from negative 1 million to positive one million
amperes.
A negative value expresses current used by the FRU.
A positive value expresses current supplied by the FRU."
SYNTAX Integer32 (-1000000000..1000000000)
ModuleAdminType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Administratively desired module states. Valid values are:
enabled(1) module is operational.
disabled(2) module is not operational.
reset(3) module is reset. This value may be specified
in a management protocol set operation, it will
not be returned in response to a management
protocol retrieval operation.
outOfServiceAdmin(4) module is powered on but out of
service, set by CLI."
SYNTAX INTEGER {
enabled(1),
disabled(2),
reset(3),
outOfServiceAdmin(4)
}
ModuleOperType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational module states. Valid values are :
unknown(1) Module is not in one of other states
normal operational states:
ok(2) Module is operational.
disabled(3) Module is administratively disabled.
okButDiagFailed(4) Module is operational but there is some
diagnostic information available.
transitional states:
boot(5) Module is currently in the process of
bringing up image. After boot, it starts
its operational software and transitions
to the appropriate state.
selfTest(6) Module is performing selfTest.
failure states:
failed(7) Module has failed due to some condition
not stated above.
missing(8) Module has been provisioned, but it is
missing
mismatchWithParent(9) Module is not compatible with parent
entity. Module has not been provisioned
and wrong type of module is plugged in.
This state can be cleared by plugging
in the appropriate module.
mismatchConfig(10) Module is not compatible with the
current
configuration. Module was correctly
provisioned earlier, however the module
was replaced by an incompatible module.
This state can be resolved by clearing
the configuration, or replacing with the
appropriate module.
diagFailed(11) Module diagnostic test failed due to
some
hardware failure.
dormant(12) Module is waiting for an external or
internal event to become operational.
outOfServiceAdmin(13) module is administratively set to be
powered on but out of service.
outOfServiceEnvTemp(14)Module is powered on but out of service,
due to environmental temperature problem.
An out-o-service module consumes less
power thus will cool down the board.
poweredDown(15) Module is in powered down state.
poweredUp(16) Module is in powered up state.
powerDenied(17) System does not have enough power in
power budget to power on this module.
powerCycled(18) Module is being power cycled.
okButPowerOverWarning(19) Module is drawing more power than
allocated to this module. The module
is still operational but may go into
a failure state. This state may be
caused by misconfiguration of power
requirements (especially for inline
power).
okButPowerOverCritical(20) Module is drawing more power
than this module is designed to
handle. The module is still
operational but may go into a
failure state and could potentially
take the system down. This state
may be caused by gross misconfi-
guration of power requirements
(especially for inline power).
syncInProgress(21) Synchronization in progress.
In a high availability system there
will be 2 control modules, active and
standby.
This transitional state specifies the
synchronization of data between the
active and standby modules.
upgrading(22) Module is upgrading.
okButAuthFailed(23) Module is operational but did not pass
hardware integrity verification.
mdr(24) Module is undergoing a Minimum
Disruptive Restart (MDR) upgrade.
firmware download states:
fwMismatchFound(25) Mistmatch found between current firmware
version and the firmware version in the
system image.
fwDownloadSuccess(26) Module firmware download succeeded.
fwDownloadFailure(27) Module firmware download failed."
SYNTAX INTEGER {
unknown(1),
ok(2),
disabled(3),
okButDiagFailed(4),
boot(5),
selfTest(6),
failed(7),
missing(8),
mismatchWithParent(9),
mismatchConfig(10),
diagFailed(11),
dormant(12),
outOfServiceAdmin(13),
outOfServiceEnvTemp(14),
poweredDown(15),
poweredUp(16),
powerDenied(17),
powerCycled(18),
okButPowerOverWarning(19),
okButPowerOverCritical(20),
syncInProgress(21),
upgrading(22),
okButAuthFailed(23),
mdr(24),
fwMismatchFound(25),
fwDownloadSuccess(26),
fwDownloadFailure(27)
}
ModuleResetReasonType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the reason for the last module reset operation.
unknown(1) source of the reset is not
identified
powerUp(2) system power up operation
parityError(3) parity error during system
bring up operation
clearConfigReset(4) reset due to clear
configuration operation
manualReset(5) reset due to administrative
request
watchDogTimeoutReset(6) reset due to watchdog timeout
resourceOverflowReset(7) reset due to resource overflow
missingTaskReset(8) reset due to missing task
lowVoltageReset(9) reset due to low voltage
controllerReset(10) reset by controller
systemReset(11) system reset
switchoverReset(12) reset due to user initiated
graceful switchover
upgradeReset(13) reset due to upgrade
downgradeReset(14) reset due to downgrade
cacheErrorReset(15) reset due to cache error
deviceDriverReset(16) reset due to device driver
error
softwareExceptionReset(17) reset due to software
exception
restoreConfigReset(18) reset due to configuration
restoration
abortRevReset(19) reset due to revision change
abort
burnBootReset(20) reset due to boot image
change
standbyCdHealthierReset(21) reset to switch to healthier
standby card
nonNativeConfigClearReset(22) reset due clearing of
non-native configuration
memoryProtectionErrorReset(23) reset due to memory protection
violation."
SYNTAX INTEGER {
unknown(1),
powerUp(2),
parityError(3),
clearConfigReset(4),
manualReset(5),
watchDogTimeoutReset(6),
resourceOverflowReset(7),
missingTaskReset(8),
lowVoltageReset(9),
controllerReset(10),
systemReset(11),
switchoverReset(12),
upgradeReset(13),
downgradeReset(14),
cacheErrorReset(15),
deviceDriverReset(16),
softwareExceptionReset(17),
restoreConfigReset(18),
abortRevReset(19),
burnBootReset(20),
standbyCdHealthierReset(21),
nonNativeConfigClearReset(22),
memoryProtectionErrorReset(23)
}
FRUTimeSeconds ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is a non-negative integer which represents
the time in second between two epochs.
Since time is not discrete, it is rounded up to
the nearest second. For example, if the elapsed
time is greater than zero and less or equal to
one second, then one second is returned, etc.
When objects are defined which use this type, the
description of the object identifies both of the
reference epochs."
SYNTAX Unsigned32
FRUCoolingUnit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The unit for the cooling capacity and requirement.
cfm(1) Cubic feet per minute
watts(2) Watts"
SYNTAX INTEGER {
cfm(1),
watts(2)
}
CefcPercentOrMinusOne ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An integer that is in the range of a percent value.
A value of -1 means that the percentage is not available."
SYNTAX Integer32 (-1 | 0..100)
CefcVmModuleOperType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational VM module states. Valid values are :
down(1) module is down.
up(2) module is operational.
unknown(3) module is unknown.
goingDown(4) module is goingDown from Up."
SYNTAX INTEGER {
down(1),
up(2),
unknown(3),
goingDown(4)
}
-- MIB variables
cefcFRUPower OBJECT IDENTIFIER
::= { cefcMIBObjects 1 }
cefcModule OBJECT IDENTIFIER
::= { cefcMIBObjects 2 }
cefcMIBNotificationEnables OBJECT IDENTIFIER
::= { cefcMIBObjects 3 }
cefcFRUFan OBJECT IDENTIFIER
::= { cefcMIBObjects 4 }
cefcPhysical OBJECT IDENTIFIER
::= { cefcMIBObjects 5 }
cefcPowerCapacity OBJECT IDENTIFIER
::= { cefcMIBObjects 6 }
cefcCooling OBJECT IDENTIFIER
::= { cefcMIBObjects 7 }
cefcConnector OBJECT IDENTIFIER
::= { cefcMIBObjects 8 }
-- cefcFRUPowerSupplyGroupTable
cefcFRUPowerSupplyGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFRUPowerSupplyGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the redundancy mode and the
operational status of the power supply groups
in the system."
::= { cefcFRUPower 1 }
cefcFRUPowerSupplyGroupEntry OBJECT-TYPE
SYNTAX CefcFRUPowerSupplyGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An cefcFRUPowerSupplyGroupTable entry lists the desired
redundancy mode, the units of the power outputs and the
available and drawn current for the power supply group.
Entries are created by the agent when a power supply group
is added to the entPhysicalTable. Entries are deleted by
the agent at power supply group removal."
INDEX { entPhysicalIndex }
::= { cefcFRUPowerSupplyGroupTable 1 }
CefcFRUPowerSupplyGroupEntry ::= SEQUENCE {
cefcPowerRedundancyMode PowerRedundancyType,
cefcPowerUnits DisplayString,
cefcTotalAvailableCurrent FRUCurrentType,
cefcTotalDrawnCurrent FRUCurrentType,
cefcPowerRedundancyOperMode PowerRedundancyType,
cefcPowerNonRedundantReason INTEGER,
cefcTotalDrawnInlineCurrent FRUCurrentType
}
cefcPowerRedundancyMode OBJECT-TYPE
SYNTAX PowerRedundancyType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired power supply redundancy
mode."
::= { cefcFRUPowerSupplyGroupEntry 1 }
cefcPowerUnits OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The units of primary supply to interpret
cefcTotalAvailableCurrent and cefcTotalDrawnCurrent
as power.
For example, one 1000-watt power supply could
deliver 100 amperes at 10 volts DC. So the value
of cefcPowerUnits would be 'at 10 volts DC'.
cefcPowerUnits is for display purposes only."
::= { cefcFRUPowerSupplyGroupEntry 2 }
cefcTotalAvailableCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total current available for FRU usage."
::= { cefcFRUPowerSupplyGroupEntry 3 }
cefcTotalDrawnCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total current drawn by powered-on FRUs."
::= { cefcFRUPowerSupplyGroupEntry 4 }
cefcPowerRedundancyOperMode OBJECT-TYPE
SYNTAX PowerRedundancyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power supply redundancy operational mode."
::= { cefcFRUPowerSupplyGroupEntry 5 }
cefcPowerNonRedundantReason OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
unknown(2),
singleSupply(3),
mismatchedSupplies(4),
supplyError(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object has the value of notApplicable(1) when
cefcPowerRedundancyOperMode of the instance does not
have the value of nonRedundant(4).
The other values explain the reason why
cefcPowerRedundancyOperMode is nonRedundant(4), e.g.
unknown(2) the reason is not identified.
singleSupply(3) There is only one power supply
in the group.
mismatchedSupplies(4) There are more than one power
supplies in the groups. However
they are mismatched and can not
work redundantly.
supplyError(5) Some power supply or supplies
does or do not working properly."
::= { cefcFRUPowerSupplyGroupEntry 6 }
cefcTotalDrawnInlineCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total inline current drawn for inline operation."
::= { cefcFRUPowerSupplyGroupEntry 7 }
-- cefcFRUPowerStatusTable
cefcFRUPowerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFRUPowerStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the power-related administrative status
and operational status of the manageable components
in the system."
::= { cefcFRUPower 2 }
cefcFRUPowerStatusEntry OBJECT-TYPE
SYNTAX CefcFRUPowerStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An cefcFRUPowerStatusTable entry lists the desired
administrative status, the operational status of the
power manageable component, and the current required by
the component for operation.
Entries are created by the agent at system power-up or
the insertion of the component. Entries are deleted by
the agent at the removal of the component.
Only components with power control are listed in the
table."
INDEX { entPhysicalIndex }
::= { cefcFRUPowerStatusTable 1 }
CefcFRUPowerStatusEntry ::= SEQUENCE {
cefcFRUPowerAdminStatus PowerAdminType,
cefcFRUPowerOperStatus PowerOperType,
cefcFRUCurrent FRUCurrentType,
cefcFRUPowerCapability BITS,
cefcFRURealTimeCurrent FRUCurrentType
}
cefcFRUPowerAdminStatus OBJECT-TYPE
SYNTAX PowerAdminType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively desired FRU power state."
::= { cefcFRUPowerStatusEntry 1 }
cefcFRUPowerOperStatus OBJECT-TYPE
SYNTAX PowerOperType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational FRU power state."
::= { cefcFRUPowerStatusEntry 2 }
cefcFRUCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current supplied by the FRU (positive values)
or current required to operate the FRU (negative values)."
::= { cefcFRUPowerStatusEntry 3 }
cefcFRUPowerCapability OBJECT-TYPE
SYNTAX BITS {
realTimeCurrent(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the set of supported power capabilities
of the FRU.
realTimeCurrent(0) -
cefcFRURealTimeCurrent is supported by the FRU."
::= { cefcFRUPowerStatusEntry 4 }
cefcFRURealTimeCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the realtime value of current supplied
by the FRU (positive values) or the realtime value of current
drawn by the FRU (negative values)."
::= { cefcFRUPowerStatusEntry 5 }
-- cefcMaxDefaultInLinePower
cefcMaxDefaultInLinePower OBJECT-TYPE
SYNTAX Integer32 (0..12500)
UNITS "miliwatts"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The system will provide power to the device connecting
to the FRU if the device needs power, like an IP Phone.
We call the providing power inline power.
This MIB object controls the maximum default inline power
for the device connecting to the FRU in the system. If the
maximum default inline power of the device is greater than
the maximum value reportable by this object, then this
object should report its maximum reportable value (12500)
and cefcMaxDefaultHighInLinePower must be used to report
the actual maximum default inline power."
DEFVAL { 12500 }
::= { cefcFRUPower 3 }
-- cefcFRUPowerSupplyValueTable
cefcFRUPowerSupplyValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFRUPowerSupplyValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the power capacity of a power FRU in the
system if it provides variable power. Power supplies usually
provide either system or inline power. They cannot be
controlled by software to dictate how they distribute power.
We can also have what are known as variable power supplies.
They can provide both system and inline power and can be
varied within hardware defined ranges for system and inline
limited by a total maximum combined output. They could be
configured by the user via CLI or SNMP or be controlled by
software internally.
This table supplements the information in the
cefcFRUPowerStatusTable for power supply FRUs. The
cefcFRUCurrent attribute in that table provides the overall
current the power supply FRU can provide while this table
gives us the individual contribution towards system and
inline power."
::= { cefcFRUPower 4 }
cefcFRUPowerSupplyValueEntry OBJECT-TYPE
SYNTAX CefcFRUPowerSupplyValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An cefcFRUPowerSupplyValueTable entry lists the current
provided by the FRU for operation.
Entries are created by the agent at system power-up or
FRU insertion. Entries are deleted by the agent at FRU
removal.
Only power supply FRUs are listed in the table."
INDEX { entPhysicalIndex }
::= { cefcFRUPowerSupplyValueTable 1 }
CefcFRUPowerSupplyValueEntry ::= SEQUENCE {
cefcFRUTotalSystemCurrent FRUCurrentType,
cefcFRUDrawnSystemCurrent FRUCurrentType,
cefcFRUTotalInlineCurrent FRUCurrentType,
cefcFRUDrawnInlineCurrent FRUCurrentType,
cefcFRUActualInputCurrent FRUCurrentType,
cefcFRUActualOutputCurrent FRUCurrentType
}
cefcFRUTotalSystemCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total current that could be supplied by the FRU (positive
values) for system operations."
::= { cefcFRUPowerSupplyValueEntry 1 }
cefcFRUDrawnSystemCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of current drawn by the FRU's in the system towards
system operations from this FRU"
::= { cefcFRUPowerSupplyValueEntry 2 }
cefcFRUTotalInlineCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total current supplied by the FRU (positive values) for
inline operations."
::= { cefcFRUPowerSupplyValueEntry 3 }
cefcFRUDrawnInlineCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of current that is being drawn from this FRU for inline
operation."
::= { cefcFRUPowerSupplyValueEntry 4 }
cefcFRUActualInputCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of actual input current of this power supply."
::= { cefcFRUPowerSupplyValueEntry 5 }
cefcFRUActualOutputCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of actual output current of this power supply."
::= { cefcFRUPowerSupplyValueEntry 6 }
cefcMaxDefaultHighInLinePower OBJECT-TYPE
SYNTAX Unsigned32
UNITS "miliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system will provide power to the device connecting
to the FRU if the device needs power, like an IP Phone.
We call the providing power inline power.
This MIB object controls the maximum default inline power
for the device connecting to the FRU in the system."
::= { cefcFRUPower 5 }
-- cefcModuleTable
cefcModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcModuleTable entry lists the operational and
administrative status information for ENTITY-MIB
entPhysicalTable entries for manageable components
of type PhysicalClass module(9)."
::= { cefcModule 1 }
cefcModuleEntry OBJECT-TYPE
SYNTAX CefcModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcModuleStatusTable entry lists the operational and
administrative status information for ENTITY-MIB
entPhysicalTable entries for manageable components
of type PhysicalClass module(9).
Entries are created by the agent at the system power-up or
module insertion.
Entries are deleted by the agent upon module removal."
INDEX { entPhysicalIndex }
::= { cefcModuleTable 1 }
CefcModuleEntry ::= SEQUENCE {
cefcModuleAdminStatus ModuleAdminType,
cefcModuleOperStatus ModuleOperType,
cefcModuleResetReason ModuleResetReasonType,
cefcModuleStatusLastChangeTime TimeStamp,
cefcModuleLastClearConfigTime TimeStamp,
cefcModuleResetReasonDescription DisplayString,
cefcModuleStateChangeReasonDescr DisplayString,
cefcModuleUpTime FRUTimeSeconds,
cefcVmModuleOperStatus CefcVmModuleOperType,
cefcVmModuleStatusLastChangeTime TimeStamp
}
cefcModuleAdminStatus OBJECT-TYPE
SYNTAX ModuleAdminType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides administrative control of the
module."
::= { cefcModuleEntry 1 }
cefcModuleOperStatus OBJECT-TYPE
SYNTAX ModuleOperType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the module's operational state."
::= { cefcModuleEntry 2 }
cefcModuleResetReason OBJECT-TYPE
SYNTAX ModuleResetReasonType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the reason for the last reset performed
on the module."
::= { cefcModuleEntry 3 }
cefcModuleStatusLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the cefcModuleOperStatus
is changed."
::= { cefcModuleEntry 4 }
cefcModuleLastClearConfigTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the
configuration was most recently cleared."
::= { cefcModuleEntry 5 }
cefcModuleResetReasonDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description qualifying the module reset reason
specified in cefcModuleResetReason.
Examples:
command xyz
missing task
switch over
watchdog timeout
etc.
cefcModuleResetReasonDescription is for display purposes only.
NMS applications must not parse."
::= { cefcModuleEntry 6 }
cefcModuleStateChangeReasonDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays human-readable textual string which
describes the cause of the last state change of the
module. This object contains zero length string
if no meaningful reason could be provided.
Examples:
'Invalid software version'
'Software download failed'
'Software version mismatch'
'Module is in standby state'
etc.
This object is for display purposes only.
NMS applications must not parse this object
and take any decision based on its value."
::= { cefcModuleEntry 7 }
cefcModuleUpTime OBJECT-TYPE
SYNTAX FRUTimeSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the up time for the module
since it was last re-initialized.
This object is not persistent; if a module reset,
restart, power off, the up time starts from zero."
::= { cefcModuleEntry 8 }
cefcVmModuleOperStatus OBJECT-TYPE
SYNTAX CefcVmModuleOperType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VM module's operational state."
::= { cefcModuleEntry 9 }
cefcVmModuleStatusLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the cefcVmModuleOperStatus
is changed."
::= { cefcModuleEntry 10 }
-- cefcIntelliModuleTable
cefcIntelliModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcIntelliModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table sparsely augments the
cefcModuleTable (i.e., every row in
this table corresponds to a row in
the cefcModuleTable but not necessarily
vice-versa).
A cefcIntelliModuleTable entry lists the
information specific to intelligent
modules which cannot be provided by the
cefcModuleTable."
::= { cefcModule 2 }
cefcIntelliModuleEntry OBJECT-TYPE
SYNTAX CefcIntelliModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcIntelliModuleTable entry lists the
information specific to an intelligent
module which cannot be provided by
this module's corresponding instance in
the cefcModuleTable. Only an intelligent
module with Internet address configured has
its entry here.
An entry of this table is created if an
intelligent module is detected by the
managed system and its management Internet
address is configured on the intelligent
module.
An entry of this table is deleted if the
removal of Internet address configuration of
this module or the module itself."
INDEX { entPhysicalIndex }
::= { cefcIntelliModuleTable 1 }
CefcIntelliModuleEntry ::= SEQUENCE {
cefcIntelliModuleIPAddrType InetAddressType,
cefcIntelliModuleIPAddr InetAddress
}
cefcIntelliModuleIPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Internet address by which the
intelligent module is reachable."
::= { cefcIntelliModuleEntry 1 }
cefcIntelliModuleIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Internet address configured
for the intelligent module.
The type of this address is
determined by the value of the object
cefcIntelliModuleIPAddrType."
::= { cefcIntelliModuleEntry 2 }
cefcModuleLocalSwitchingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcModuleLocalSwitchingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table sparsely augments the cefcModuleTable
(i.e., every row in this table corresponds to a row in
the cefcModuleTable but not necessarily vice-versa).
A cefcModuleLocalSwitchingTable entry lists the
information specific to local switching capable
modules which cannot be provided by the
cefcModuleTable."
::= { cefcModule 3 }
cefcModuleLocalSwitchingEntry OBJECT-TYPE
SYNTAX CefcModuleLocalSwitchingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcModuleLocalSwitchingTable entry lists the
information specific to a local switching capable
module which cannot be provided by this module's
corresponding instance in the cefcModuleTable.
Only a module which is capable of local switching
has its entry here.
An entry of this table is created if a module which
is capable of local switching is detected by the
managed system.
An entry of this table is deleted if the
removal of this module."
INDEX { entPhysicalIndex }
::= { cefcModuleLocalSwitchingTable 1 }
CefcModuleLocalSwitchingEntry ::= SEQUENCE {
cefcModuleLocalSwitchingMode INTEGER
}
cefcModuleLocalSwitchingMode OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the mode of local switching.
enabled(1) - local switching is enabled.
disabled(2) - local switching is disabled."
::= { cefcModuleLocalSwitchingEntry 1 }
-- cefcFanTrayStatusTable
cefcFanTrayStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFanTrayStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the operational status information
for all ENTITY-MIB entPhysicalTable entries which have
an entPhysicalClass of 'fan'; specifically, all
entPhysicalTable entries which represent either: one
physical fan, or a single physical 'fan tray' which is a
manufactured (inseparable in the field) combination of
multiple fans."
::= { cefcFRUFan 1 }
cefcFanTrayStatusEntry OBJECT-TYPE
SYNTAX CefcFanTrayStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An cefcFanTrayStatusTable entry lists the operational
status information for the ENTITY-MIB entPhysicalTable
entry which is identified by the value of entPhysicalIndex.
The value of entPhysicalClass for the identified entry will
be 'fan', and the represented physical entity will be
either: one physical fan, or a single physical 'fan tray'
which is a manufactured (inseparable in the field)
combination of multiple fans.
Entries are created by the agent at system power-up or
fan or fan tray insertion. Entries are deleted
by the agent at the fan or fan tray removal."
INDEX { entPhysicalIndex }
::= { cefcFanTrayStatusTable 1 }
CefcFanTrayStatusEntry ::= SEQUENCE {
cefcFanTrayOperStatus INTEGER,
cefcFanTrayDirection INTEGER
}
cefcFanTrayOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
up(2),
down(3),
warning(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the fan or fan tray.
unknown(1) - unknown.
up(2) - powered on.
down(3) - powered down.
warning(4) - partial failure, needs replacement
as soon as possible."
::= { cefcFanTrayStatusEntry 1 }
cefcFanTrayDirection OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
frontToBack(2),
backToFront(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The air flow direction of the fan or fan tray.
unknown(1) - unknown.
frontToBack(2) - air flow from front to back
backToFront(3) - air flow from back to front"
::= { cefcFanTrayStatusEntry 2 }
-- cefcFanTable
cefcFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of fan information
for all the fans that have entPhysicalTable
entries with 'fan' in the entPhysicalClass
and capable of providing management information
defined in this table."
::= { cefcFRUFan 2 }
cefcFanEntry OBJECT-TYPE
SYNTAX CefcFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information
applicable to a particular fan unit.
Entries are created by the agent at system power-up or
fan or fan tray insertion. Entries are deleted
by the agent at the fan or fan tray removal."
INDEX { entPhysicalIndex }
::= { cefcFanTable 1 }
CefcFanEntry ::= SEQUENCE {
cefcFanSpeed Unsigned32,
cefcFanSpeedPercent CefcPercentOrMinusOne
}
cefcFanSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "rpm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed of the fan."
::= { cefcFanEntry 1 }
cefcFanSpeedPercent OBJECT-TYPE
SYNTAX CefcPercentOrMinusOne
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percent of speed relative to the maximum
speed of the fan."
::= { cefcFanEntry 2 }
-- cefcPhysicalTable
cefcPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per physical entity."
::= { cefcPhysical 1 }
cefcPhysicalEntry OBJECT-TYPE
SYNTAX CefcPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical entity."
INDEX { entPhysicalIndex }
::= { cefcPhysicalTable 1 }
CefcPhysicalEntry ::= SEQUENCE {
cefcPhysicalStatus INTEGER
}
cefcPhysicalStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
supported(2),
unsupported(3),
incompatible(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this physical entity.
other(1) - the status is not any of the listed below.
supported(2) - this entity is supported.
unsupported(3) - this entity is unsupported.
incompatible(4) - this entity is incompatible.
It would be unsupported(3), if the ID read from Serial
EPROM is not supported. It would be incompatible(4), if
in the present configuration this FRU is not supported."
::= { cefcPhysicalEntry 1 }
-- Power supply capacity
cefcPowerSupplyInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcPowerSupplyInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the power input information
for all the power supplies that have entPhysicalTable
entries with 'powerSupply' in the entPhysicalClass.
The entries are created by the agent at the system
power-up or power supply insertion.
Entries are deleted by the agent upon power supply
removal.
The number of entries is determined by the number of
power supplies and number of power inputs on the power
supply."
::= { cefcPowerCapacity 1 }
cefcPowerSupplyInputEntry OBJECT-TYPE
SYNTAX CefcPowerSupplyInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing power input management information
applicable to a particular power supply and input."
INDEX {
entPhysicalIndex,
cefcPowerSupplyInputIndex
}
::= { cefcPowerSupplyInputTable 1 }
CefcPowerSupplyInputEntry ::= SEQUENCE {
cefcPowerSupplyInputIndex Unsigned32,
cefcPowerSupplyInputType INTEGER
}
cefcPowerSupplyInputIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each input on
a power supply."
::= { cefcPowerSupplyInputEntry 1 }
cefcPowerSupplyInputType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
acLow(2),
acHigh(3),
dcLow(4),
dcHigh(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of an input power detected on the power
supply.
unknown(1): No input power is detected.
acLow(2): Lower rating AC input power is detected.
acHigh(3): Higher rating AC input power is detected.
dcLow(4): Lower rating DC input power is detected.
dcHigh(5): Higher rating DC input power is detected."
::= { cefcPowerSupplyInputEntry 2 }
cefcPowerSupplyOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcPowerSupplyOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of possible output
mode for the power supplies, whose ENTITY-MIB
entPhysicalTable entries have an entPhysicalClass
of 'powerSupply'. It also indicate which mode
is the operational mode within the system."
::= { cefcPowerCapacity 2 }
cefcPowerSupplyOutputEntry OBJECT-TYPE
SYNTAX CefcPowerSupplyOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcPowerSupplyOutputTable entry lists the
power output capacity and its operational status
for manageable components of type PhysicalClass
'powerSupply'.
Entries are created by the agent at the system
power-up or power supply insertion.
Entries are deleted by the agent upon power supply
removal.
The number of entries of a power supply is determined
by the power supply."
INDEX {
entPhysicalIndex,
cefcPSOutputModeIndex
}
::= { cefcPowerSupplyOutputTable 1 }
CefcPowerSupplyOutputEntry ::= SEQUENCE {
cefcPSOutputModeIndex Unsigned32,
cefcPSOutputModeCurrent FRUCurrentType,
cefcPSOutputModeInOperation TruthValue
}
cefcPSOutputModeIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
possible output mode on a power supply."
::= { cefcPowerSupplyOutputEntry 1 }
cefcPSOutputModeCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output capacity of the power supply."
::= { cefcPowerSupplyOutputEntry 2 }
cefcPSOutputModeInOperation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of 'true' indicates that this mode is the
operational mode of the power supply output
capacity.
A value of 'false' indicates that this mode is not
the operational mode of the power supply output
capacity.
For a given power supply's entPhysicalIndex,
at most one instance of this object can have the
value of true(1)."
::= { cefcPowerSupplyOutputEntry 3 }
-- Chassis cooling management
cefcChassisCoolingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcChassisCoolingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the cooling capacity
information of the chassis whose ENTITY-MIB
entPhysicalTable entries have an
entPhysicalClass of 'chassis'."
::= { cefcCooling 1 }
cefcChassisCoolingEntry OBJECT-TYPE
SYNTAX CefcChassisCoolingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcChassisCoolingEntry lists the maximum
cooling capacity that could be provided
for one slot on the manageable components of type
PhysicalClass 'chassis'.
Entries are created by the agent if the corresponding
entry is created in ENTITY-MIB entPhysicalTable.
Entries are deleted by the agent if the corresponding
entry is deleted in ENTITY-MIB entPhysicalTable."
INDEX { entPhysicalIndex }
::= { cefcChassisCoolingTable 1 }
CefcChassisCoolingEntry ::= SEQUENCE {
cefcChassisPerSlotCoolingCap Unsigned32,
cefcChassisPerSlotCoolingUnit FRUCoolingUnit
}
cefcChassisPerSlotCoolingCap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum cooling capacity that could be provided
for any slot in this chassis.
The default unit of the cooling capacity is 'cfm', if
cefcChassisPerSlotCoolingUnit is not supported."
::= { cefcChassisCoolingEntry 1 }
cefcChassisPerSlotCoolingUnit OBJECT-TYPE
SYNTAX FRUCoolingUnit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit of the maximum cooling capacity for any slot
in this chassis."
::= { cefcChassisCoolingEntry 2 }
cefcFanCoolingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFanCoolingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the cooling capacity
information of the fans whose ENTITY-MIB
entPhysicalTable entries have an
entPhysicalClass of 'fan'."
::= { cefcCooling 2 }
cefcFanCoolingEntry OBJECT-TYPE
SYNTAX CefcFanCoolingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcFanCoolingEntry lists the cooling
capacity that is provided by the
manageable components of type PhysicalClass
'fan'.
Entries are created by the agent if the corresponding
entry is created in ENTITY-MIB entPhysicalTable.
Entries are deleted by the agent if the corresponding
entry is deleted in ENTITY-MIB entPhysicalTable."
INDEX { entPhysicalIndex }
::= { cefcFanCoolingTable 1 }
CefcFanCoolingEntry ::= SEQUENCE {
cefcFanCoolingCapacity Unsigned32,
cefcFanCoolingCapacityUnit FRUCoolingUnit
}
cefcFanCoolingCapacity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cooling capacity that is provided by this fan.
The default unit of the fan cooling capacity is 'cfm',
if cefcFanCoolingCapacityUnit is not supported."
::= { cefcFanCoolingEntry 1 }
cefcFanCoolingCapacityUnit OBJECT-TYPE
SYNTAX FRUCoolingUnit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit of the fan cooling capacity."
::= { cefcFanCoolingEntry 2 }
cefcModuleCoolingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcModuleCoolingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the cooling requirement for
all the manageable components of type entPhysicalClass
'module'."
::= { cefcCooling 3 }
cefcModuleCoolingEntry OBJECT-TYPE
SYNTAX CefcModuleCoolingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcModuleCoolingEntry lists the cooling
requirement for a manageable components of type
entPhysicalClass 'module'.
Entries are created by the agent at the system
power-up or module insertion.
Entries are deleted by the agent upon module
removal."
INDEX { entPhysicalIndex }
::= { cefcModuleCoolingTable 1 }
CefcModuleCoolingEntry ::= SEQUENCE {
cefcModuleCooling Unsigned32,
cefcModuleCoolingUnit FRUCoolingUnit
}
cefcModuleCooling OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cooling requirement of the module and its daughter
cards.
The default unit of the module cooling requirement is
'cfm', if cefcModuleCoolingUnit is not supported."
::= { cefcModuleCoolingEntry 1 }
cefcModuleCoolingUnit OBJECT-TYPE
SYNTAX FRUCoolingUnit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit of the cooling requirement of the module and its
daughter cards."
::= { cefcModuleCoolingEntry 2 }
cefcFanCoolingCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcFanCoolingCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of the possible cooling
capacity modes and properties of the fans, whose
ENTITY-MIB entPhysicalTable entries have an
entPhysicalClass of 'fan'."
::= { cefcCooling 4 }
cefcFanCoolingCapEntry OBJECT-TYPE
SYNTAX CefcFanCoolingCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcFanCoolingCapacityEntry lists the cooling
capacity mode of a manageable components of type
entPhysicalClass 'fan'. It also lists the corresponding
cooling capacity provided and the power consumed
by the fan on this mode.
Entries are created by the agent if the corresponding
entry is created in ENTITY-MIB entPhysicalTable.
Entries are deleted by the agent if the corresponding
entry is deleted in ENTITY-MIB entPhysicalTable."
INDEX {
entPhysicalIndex,
cefcFanCoolingCapIndex
}
::= { cefcFanCoolingCapTable 1 }
CefcFanCoolingCapEntry ::= SEQUENCE {
cefcFanCoolingCapIndex Unsigned32,
cefcFanCoolingCapModeDescr SnmpAdminString,
cefcFanCoolingCapCapacity Unsigned32,
cefcFanCoolingCapCurrent FRUCurrentType,
cefcFanCoolingCapCapacityUnit FRUCoolingUnit
}
cefcFanCoolingCapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary value that uniquely identifies a
cooling capacity mode for a fan."
::= { cefcFanCoolingCapEntry 1 }
cefcFanCoolingCapModeDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the cooling capacity
mode of the fan."
::= { cefcFanCoolingCapEntry 2 }
cefcFanCoolingCapCapacity OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cooling capacity that could be provided
when the fan is operating in this mode.
The default unit of the cooling capacity is 'cfm',
if cefcFanCoolingCapCapacityUnit is not supported."
::= { cefcFanCoolingCapEntry 3 }
cefcFanCoolingCapCurrent OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power consumption of the fan when operating in
in this mode."
::= { cefcFanCoolingCapEntry 4 }
cefcFanCoolingCapCapacityUnit OBJECT-TYPE
SYNTAX FRUCoolingUnit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit of the fan cooling capacity when operating
in this mode."
::= { cefcFanCoolingCapEntry 5 }
-- Connector rating management
cefcConnectorRatingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcConnectorRatingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the connector power
ratings of FRUs.
Only components with power connector rating
management are listed in this table."
::= { cefcConnector 1 }
cefcConnectorRatingEntry OBJECT-TYPE
SYNTAX CefcConnectorRatingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcConnectorRatingEntry lists the
power connector rating information of a
component in the system.
An entry or entries are created by the agent
when an physical entity with connector rating
management is added to the ENTITY-MIB
entPhysicalTable. An entry is deleted
by the agent at the entity removal."
INDEX { entPhysicalIndex }
::= { cefcConnectorRatingTable 1 }
CefcConnectorRatingEntry ::= SEQUENCE {
cefcConnectorRating FRUCurrentType
}
cefcConnectorRating OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum power that the component's
connector can withdraw."
::= { cefcConnectorRatingEntry 1 }
cefcModulePowerConsumptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CefcModulePowerConsumptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the total power consumption
information for modules whose ENTITY-MIB
entPhysicalTable entries have an entPhysicalClass
of 'module'."
::= { cefcConnector 2 }
cefcModulePowerConsumptionEntry OBJECT-TYPE
SYNTAX CefcModulePowerConsumptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cefcModulePowerConsumptionEntry lists the total
power consumption of a manageable components of type
entPhysicalClass 'module'.
Entries are created by the agent at the system
power-up or module insertion.
Entries are deleted by the agent upon module
removal."
INDEX { entPhysicalIndex }
::= { cefcModulePowerConsumptionTable 1 }
CefcModulePowerConsumptionEntry ::= SEQUENCE {
cefcModulePowerConsumption FRUCurrentType
}
cefcModulePowerConsumption OBJECT-TYPE
SYNTAX FRUCurrentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combined power consumption to operate the module
and its submodule(s) and inline-power device(s)."
::= { cefcModulePowerConsumptionEntry 1 }
-- notifications
cefcMIBEnableStatusNotification OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system
produces the following notifications:
cefcModuleStatusChange, cefcPowerStatusChange,
cefcFRUInserted, cefcFRURemoved,
cefcUnrecognizedFRU, cefcFanTrayStatusChange
and cefcVmModuleStatusChangeNotif.
A false value will prevent these notifications
from being generated."
DEFVAL { false }
::= { cefcMIBNotificationEnables 1 }
cefcEnablePSOutputChangeNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system
produces the cefcPowerSupplyOutputChange
notifications when the output capacity of
a power supply has changed. A false value
will prevent this notification to generated."
DEFVAL { false }
::= { cefcMIBNotificationEnables 2 }
cefcMIBNotifications OBJECT IDENTIFIER
::= { cefcFRUMIBNotificationPrefix 0 }
cefcModuleStatusChange NOTIFICATION-TYPE
OBJECTS {
cefcModuleOperStatus,
cefcModuleStatusLastChangeTime
}
STATUS current
DESCRIPTION
"This notification is generated when the value of
cefcModuleOperStatus changes. It can be utilized by
an NMS to update the status of the module it is
managing."
::= { cefcMIBNotifications 1 }
cefcPowerStatusChange NOTIFICATION-TYPE
OBJECTS {
cefcFRUPowerOperStatus,
cefcFRUPowerAdminStatus
}
STATUS current
DESCRIPTION
"The cefcFRUPowerStatusChange notification indicates that
the power status of a FRU has changed. The varbind for this
notification indicates the entPhysicalIndex of the FRU,
and the new operational-status of the FRU."
::= { cefcMIBNotifications 2 }
cefcFRUInserted NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn }
STATUS current
DESCRIPTION
"The cecfFRUInserted notification indicates that a FRU was
inserted. The varbind for this notification indicates the
entPhysicalIndex of the inserted FRU, and the entPhysicalIndex
of the FRU's container."
::= { cefcMIBNotifications 3 }
cefcFRURemoved NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn }
STATUS current
DESCRIPTION
"The cefcFRURemoved notification indicates that a FRU was
removed. The varbind for this notification indicates the
entPhysicalIndex of the removed FRU, and the entPhysicalIndex
of the FRU's container."
::= { cefcMIBNotifications 4 }
cefcUnrecognizedFRU NOTIFICATION-TYPE
OBJECTS {
entPhysicalClass,
entPhysicalVendorType,
entPhysicalName,
entPhysicalModelName,
cefcPhysicalStatus
}
STATUS current
DESCRIPTION
"The cefcUnrecognizedFRU notification indicates that a FRU was
inserted whose product ID is not supported. The varbind for
this notification indicates the entPhysicalIndex of the
inserted FRU, the entPhysicalClass this FRU belongs to, the
entPhysicalVendorType of this FRU, the entPhysicalName
of the FRU, the entPhysicalModelName of the inserted FRU, and
the cefcPhysicalStatus telling the reason code for sending this
notification."
::= { cefcMIBNotifications 5 }
cefcFanTrayStatusChange NOTIFICATION-TYPE
OBJECTS { cefcFanTrayOperStatus }
STATUS current
DESCRIPTION
"This notification is generated when the value of
cefcFanTrayOperStatus changes."
::= { cefcMIBNotifications 6 }
cefcPowerSupplyOutputChange NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
entPhysicalModelName,
cefcPSOutputModeCurrent
}
STATUS current
DESCRIPTION
"The notification indicates that the power
supply's output capacity has changed.
This notification is triggered whenever one instance
of the power supply's cefcPSOutputModeInOperation
has transitioned from 'false' to 'true'."
::= { cefcMIBNotifications 7 }
cefcVmModuleStatusChangeNotif NOTIFICATION-TYPE
OBJECTS {
cefcVmModuleOperStatus,
cefcVmModuleStatusLastChangeTime
}
STATUS current
DESCRIPTION
"This notification is generated when the value of
cefcVmModuleOperStatus changes. It can be utilized by
an NMS to update the status of the module it is
managing."
::= { cefcMIBNotifications 8 }
-- conformance information
cefcMIBCompliances OBJECT IDENTIFIER
::= { cefcMIBConformance 1 }
cefcMIBGroups OBJECT IDENTIFIER
::= { cefcMIBConformance 2 }
-- compliance statements
cefcMIBPowerCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS { cefcMIBPowerModeGroup }
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
::= { cefcMIBCompliances 1 }
cefcMIBPowerCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroup
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be implemented
for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
::= { cefcMIBCompliances 2 }
cefcMIBPowerCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroup
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
::= { cefcMIBCompliances 3 }
cefcMIBPowerCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroup
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cefcMIBCompliances 4 }
cefcMIBPowerCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup,
cefcMgmtNotificationsGroup2
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroup
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
GROUP cefcMIBFanTrayStatusGroup
DESCRIPTION
"The cefcMIBFanTrayStatusGroup must be implemented
in all systems which can detect the status of Fan
Tray FRUs."
GROUP cefcMIBPhysicalGroup
DESCRIPTION
"The collection of objects which show information of
the Physical Entity."
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cefcMIBCompliances 5 }
cefcMIBPowerCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroupRev1
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
GROUP cefcMIBFanTrayStatusGroup
DESCRIPTION
"The cefcMIBFanTrayStatusGroup must be implemented
in all systems which can detect the status of Fan
Tray FRUs."
GROUP cefcMIBPhysicalGroup
DESCRIPTION
"The collection of objects which show information of
the Physical Entity."
GROUP cefcMgmtNotificationsGroup2
DESCRIPTION
"The implementation of this group of notifications
is optional."
GROUP cefcMIBPowerOperModeGroup
DESCRIPTION
"The cefcMIBPowerOperModeGroup must be
implemented for the device which supports
power supply operational modes."
GROUP cefcModuleExtGroup
DESCRIPTION
"Implementation of cefcModuleExtGroup is
optional."
GROUP cefcIntelliModuleGroup
DESCRIPTION
"Implementation of cefcModuleAddrGroup is
optional."
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcIntelliModuleIPAddrType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"An implementation is only required to
support IPv4 addresses."
::= { cefcMIBCompliances 6 }
cefcMIBPowerCompliance7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroupRev1
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
GROUP cefcMIBFanTrayStatusGroup
DESCRIPTION
"The cefcMIBFanTrayStatusGroup must be implemented
in all systems which can detect the status of Fan
Tray FRUs."
GROUP cefcMIBPhysicalGroup
DESCRIPTION
"The collection of objects which show information of
the Physical Entity."
GROUP cefcMgmtNotificationsGroup2
DESCRIPTION
"The implementation of this group of notifications
is optional."
GROUP cefcMIBPowerOperModeGroup
DESCRIPTION
"The cefcMIBPowerOperModeGroup must be
implemented for the device which supports
power supply operational modes."
GROUP cefcModuleExtGroup
DESCRIPTION
"Implementation of cefcModuleExtGroup is
optional."
GROUP cefcIntelliModuleGroup
DESCRIPTION
"Implementation of cefcModuleAddrGroup is
optional."
GROUP cefcPowerCapacityGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power capacity
information."
GROUP cefcCoolingGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate cooling
capacity information."
GROUP cefcConnectorRatingGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power
connector rating and module power total
consumption information."
GROUP cefcMIBNotificationEnablesGroup2
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMgmtNotificationsGroup3
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcIntelliModuleIPAddrType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"An implementation is only required to
support IPv4 addresses."
::= { cefcMIBCompliances 7 }
cefcMIBPowerCompliance8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroupRev1
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
GROUP cefcMIBFanTrayStatusGroup
DESCRIPTION
"The cefcMIBFanTrayStatusGroup must be implemented
in all systems which can detect the status of Fan
Tray FRUs."
GROUP cefcMIBPhysicalGroup
DESCRIPTION
"The collection of objects which show information of
the Physical Entity."
GROUP cefcMgmtNotificationsGroup2
DESCRIPTION
"The implementation of this group of notifications
is optional."
GROUP cefcMIBPowerOperModeGroup
DESCRIPTION
"The cefcMIBPowerOperModeGroup must be
implemented for the device which supports
power supply operational modes."
GROUP cefcModuleExtGroup
DESCRIPTION
"Implementation of cefcModuleExtGroup is
optional."
GROUP cefcIntelliModuleGroup
DESCRIPTION
"Implementation of cefcModuleAddrGroup is
optional."
GROUP cefcPowerCapacityGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power capacity
information."
GROUP cefcCoolingGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate cooling
capacity information."
GROUP cefcConnectorRatingGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power
connector rating and module power total
consumption information."
GROUP cefcMIBNotificationEnablesGroup2
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMgmtNotificationsGroup3
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMIBInLinePowerCurrentGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate inline power
usage information."
GROUP cefcMIBPowerRedundancyInfoGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate the reason
why the redundancy of the power supplies cannot
be achieved."
GROUP cefcFanCoolingCapGroup
DESCRIPTION
"This group is mandatory for devices which
can provide the cooling capacity modes
and properties of the fans in the system."
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcIntelliModuleIPAddrType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"An implementation is only required to
support IPv4 addresses."
::= { cefcMIBCompliances 8 }
cefcMIBPowerCompliance9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroupRev1
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
GROUP cefcMIBFanTrayStatusGroup
DESCRIPTION
"The cefcMIBFanTrayStatusGroup must be implemented
in all systems which can detect the status of Fan
Tray FRUs."
GROUP cefcMIBPhysicalGroup
DESCRIPTION
"The collection of objects which show information of
the Physical Entity."
GROUP cefcMgmtNotificationsGroup2
DESCRIPTION
"The implementation of this group of notifications
is optional."
GROUP cefcMIBPowerOperModeGroup
DESCRIPTION
"The cefcMIBPowerOperModeGroup must be
implemented for the device which supports
power supply operational modes."
GROUP cefcModuleExtGroup
DESCRIPTION
"Implementation of cefcModuleExtGroup is
optional."
GROUP cefcIntelliModuleGroup
DESCRIPTION
"Implementation of cefcModuleAddrGroup is
optional."
GROUP cefcPowerCapacityGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power capacity
information."
GROUP cefcConnectorRatingGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power
connector rating and module power total
consumption information."
GROUP cefcMIBNotificationEnablesGroup2
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMgmtNotificationsGroup3
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMIBInLinePowerCurrentGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate inline power
usage information."
GROUP cefcMIBPowerRedundancyInfoGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate the reason
why the redundancy of the power supplies cannot
be achived."
GROUP cefcFanCoolingCapGroup
DESCRIPTION
"This group is mandatory for devices which
can provide the cooling capacity modes
and properties of the fans in the system."
GROUP cefcMIBModuleLocalSwitchingGroup
DESCRIPTION
"This group is mandatory for devices which
support modules with local switching
functionality."
GROUP cefcFRUPowerRealTimeStatusGroup
DESCRIPTION
"This group is mandatory for devices which
support power related realtime status."
GROUP cefcFRUPowerCapabilityGroup
DESCRIPTION
"This group is mandatory for devices which
support power related capability information."
GROUP cefcFRUCoolingUnitGroup
DESCRIPTION
"This group is mandatory for devices which
support the cooling unit information."
GROUP cefcFRUFanCoolingUnitGroup
DESCRIPTION
"This group is mandatory for devices which
support the fan capacity cooling unit information."
GROUP cefcCoolingGroup2
DESCRIPTION
"This group is mandatory for devices which
support the chassis cooling capacity and module
cooling requirement."
GROUP cefcFanCoolingGroup
DESCRIPTION
"This group is mandatory for devices which
support the fan cooling capacity information."
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcModuleLocalSwitchingMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcIntelliModuleIPAddrType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"An implementation is only required to
support IPv4 addresses."
::= { cefcMIBCompliances 9 }
cefcMIBPowerCompliance10 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An Entity-MIB implementation can implement this group to
provide FRU power status and control."
MODULE -- this module
MANDATORY-GROUPS {
cefcMIBPowerModeGroup,
cefcMgmtNotificationsGroup
}
GROUP cefcMIBPowerFRUControlGroup
DESCRIPTION
"The cefcMIBPowerFRUControlGroup must be implemented
for FRUs that have power control"
GROUP cefcMIBModuleGroup
DESCRIPTION
"The cefcMIBModuleGroup must be implemented for
FRUs that are of module type."
GROUP cefcMIBInLinePowerControlGroupRev1
DESCRIPTION
"The cefcMIBInLinePowerControlGroup must be
implemented for FRUs that have inline power control"
GROUP cefcMIBNotificationEnablesGroup
DESCRIPTION
"The cefcMIBNotificationEnablesGroup must be
implemented for FRUs that have notification"
GROUP cefcModuleGroupRev1
DESCRIPTION
"The cefcModuleGroupRev1 is not mandatory for
agents with FRUs that are of module type."
GROUP cefcMIBPowerFRUValueGroup
DESCRIPTION
"The cefcMIBPowerFRUValueGroup must be implemented for
power supply FRUs that have variable output"
GROUP cefcMIBFanTrayStatusGroup
DESCRIPTION
"The cefcMIBFanTrayStatusGroup must be implemented
in all systems which can detect the status of Fan
Tray FRUs."
GROUP cefcMIBPhysicalGroup
DESCRIPTION
"The collection of objects which show information of
the Physical Entity."
GROUP cefcMgmtNotificationsGroup2
DESCRIPTION
"The implementation of this group of notifications
is optional."
GROUP cefcMIBPowerOperModeGroup
DESCRIPTION
"The cefcMIBPowerOperModeGroup must be
implemented for the device which supports
power supply operational modes."
GROUP cefcModuleExtGroup
DESCRIPTION
"Implementation of cefcModuleExtGroup is
optional."
GROUP cefcIntelliModuleGroup
DESCRIPTION
"Implementation of cefcModuleAddrGroup is
optional."
GROUP cefcPowerCapacityGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power capacity
information."
GROUP cefcConnectorRatingGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate power
connector rating and module power total
consumption information."
GROUP cefcMIBNotificationEnablesGroup2
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMgmtNotificationsGroup3
DESCRIPTION
"This group is mandatory for devices which
support the SNMP notification to notify
the power supply output capacity changes."
GROUP cefcMIBInLinePowerCurrentGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate inline power
usage information."
GROUP cefcMIBPowerRedundancyInfoGroup
DESCRIPTION
"This group is mandatory for devices which
have the capability to populate the reason
why the redundancy of the power supplies cannot
be achived."
GROUP cefcFanCoolingCapGroup
DESCRIPTION
"This group is mandatory for devices which
can provide the cooling capacity modes
and properties of the fans in the system."
GROUP cefcMIBModuleLocalSwitchingGroup
DESCRIPTION
"This group is mandatory for devices which
support modules with local switching
functionality."
GROUP cefcFRUPowerRealTimeStatusGroup
DESCRIPTION
"This group is mandatory for devices which
support power related realtime status."
GROUP cefcFRUPowerCapabilityGroup
DESCRIPTION
"This group is mandatory for devices which
support power related capability information."
GROUP cefcFRUCoolingUnitGroup
DESCRIPTION
"This group is mandatory for devices which
support the cooling unit information."
GROUP cefcFRUFanCoolingUnitGroup
DESCRIPTION
"This group is mandatory for devices which
support the fan capacity cooling unit information."
GROUP cefcCoolingGroup2
DESCRIPTION
"This group is mandatory for devices which
support the chassis cooling capacity and module
cooling requirement."
GROUP cefcFanCoolingGroup
DESCRIPTION
"This group is mandatory for devices which
support the fan cooling capacity information."
GROUP cefcFanDirectionGroup
DESCRIPTION
"This group is mandatory for devices which
support fan direction."
GROUP cefcFanSpeedGroup
DESCRIPTION
"This group is mandatory for devices which
support fan speed."
GROUP cefcPowerSupplyActualGroup
DESCRIPTION
"This group is mandatory for devices which
support actual input and output current of
a power supply."
GROUP cefcVmModuleGroup
DESCRIPTION
"This group is mandatory for devices which
support VM module status."
GROUP cefcVmModuleNotifsGroup
DESCRIPTION
"This group is mandatory for devices which
support VM module status notifications."
OBJECT cefcFRUTotalSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnSystemCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUTotalInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcFRUDrawnInlineCurrent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcModuleLocalSwitchingMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cefcIntelliModuleIPAddrType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"An implementation is only required to
support IPv4 addresses."
::= { cefcMIBCompliances 10 }
-- units of conformance
cefcMIBPowerModeGroup OBJECT-GROUP
OBJECTS {
cefcPowerRedundancyMode,
cefcPowerUnits,
cefcTotalAvailableCurrent,
cefcTotalDrawnCurrent
}
STATUS current
DESCRIPTION
"The collection of objects which are used
to configure and monitor power-control for
FRUs."
::= { cefcMIBGroups 1 }
cefcMIBPowerFRUControlGroup OBJECT-GROUP
OBJECTS {
cefcFRUPowerAdminStatus,
cefcFRUPowerOperStatus,
cefcFRUCurrent
}
STATUS current
DESCRIPTION
"The collection of objects which are used
to configure and monitor power-control for
FRUs."
::= { cefcMIBGroups 2 }
cefcMIBModuleGroup OBJECT-GROUP
OBJECTS {
cefcModuleAdminStatus,
cefcModuleOperStatus,
cefcModuleResetReason,
cefcModuleStatusLastChangeTime
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
operational state and redundancy state of the modules"
::= { cefcMIBGroups 3 }
cefcMIBInLinePowerControlGroup OBJECT-GROUP
OBJECTS { cefcMaxDefaultInLinePower }
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to
configure and monitor inline power control for
FRUs."
::= { cefcMIBGroups 4 }
cefcMIBNotificationEnablesGroup OBJECT-GROUP
OBJECTS { cefcMIBEnableStatusNotification }
STATUS current
DESCRIPTION
"The collection of objects which are used to
enable notification."
::= { cefcMIBGroups 5 }
cefcMgmtNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cefcModuleStatusChange,
cefcPowerStatusChange,
cefcFRUInserted,
cefcFRURemoved
}
STATUS current
DESCRIPTION
"The notifications which a FRU Management entity is
required to implement."
::= { cefcMIBGroups 6 }
cefcModuleGroupRev1 OBJECT-GROUP
OBJECTS {
cefcModuleLastClearConfigTime,
cefcModuleResetReasonDescription
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
operational state and redundancy state of the modules"
::= { cefcMIBGroups 7 }
cefcMIBPowerFRUValueGroup OBJECT-GROUP
OBJECTS {
cefcFRUTotalSystemCurrent,
cefcFRUDrawnSystemCurrent,
cefcFRUTotalInlineCurrent,
cefcFRUDrawnInlineCurrent
}
STATUS current
DESCRIPTION
"The collection of objects which are used to retrieve
the total and used capacity of a power supply for both
system and inline power."
::= { cefcMIBGroups 8 }
cefcMIBFanTrayStatusGroup OBJECT-GROUP
OBJECTS { cefcFanTrayOperStatus }
STATUS current
DESCRIPTION
"The collection of objects which show information of the
status of Fan Tray FRUs."
::= { cefcMIBGroups 9 }
cefcMIBPhysicalGroup OBJECT-GROUP
OBJECTS { cefcPhysicalStatus }
STATUS current
DESCRIPTION
"The collection of objects which show information of the
Physical Entity."
::= { cefcMIBGroups 10 }
cefcMgmtNotificationsGroup2 NOTIFICATION-GROUP
NOTIFICATIONS {
cefcUnrecognizedFRU,
cefcFanTrayStatusChange
}
STATUS current
DESCRIPTION
"The additional notifications for FRU status."
::= { cefcMIBGroups 11 }
cefcMIBPowerOperModeGroup OBJECT-GROUP
OBJECTS { cefcPowerRedundancyOperMode }
STATUS current
DESCRIPTION
"The collection of objects which are used
to monitor the device's power supply operational
redundancy mode."
::= { cefcMIBGroups 12 }
cefcMIBInLinePowerControlGroupRev1 OBJECT-GROUP
OBJECTS { cefcMaxDefaultHighInLinePower }
STATUS current
DESCRIPTION
"The collection of objects which are used to
configure and monitor inline power control for
FRUs."
::= { cefcMIBGroups 13 }
cefcModuleExtGroup OBJECT-GROUP
OBJECTS {
cefcModuleStateChangeReasonDescr,
cefcModuleUpTime
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
state change reason and up time of the modules."
::= { cefcMIBGroups 14 }
cefcIntelliModuleGroup OBJECT-GROUP
OBJECTS {
cefcIntelliModuleIPAddrType,
cefcIntelliModuleIPAddr
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
information specific to intelligent modules."
::= { cefcMIBGroups 15 }
cefcPowerCapacityGroup OBJECT-GROUP
OBJECTS {
cefcPowerSupplyInputType,
cefcPSOutputModeCurrent,
cefcPSOutputModeInOperation
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
power capacity information"
::= { cefcMIBGroups 16 }
cefcCoolingGroup OBJECT-GROUP
OBJECTS {
cefcChassisPerSlotCoolingCap,
cefcFanCoolingCapacity,
cefcModuleCooling
}
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to get the
cooling capacity information."
::= { cefcMIBGroups 17 }
cefcConnectorRatingGroup OBJECT-GROUP
OBJECTS {
cefcConnectorRating,
cefcModulePowerConsumption
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
power connector rating and module power total
consumption information."
::= { cefcMIBGroups 18 }
cefcMIBNotificationEnablesGroup2 OBJECT-GROUP
OBJECTS { cefcEnablePSOutputChangeNotif }
STATUS current
DESCRIPTION
"The collection of objects which are used to
enable additional group of notifications."
::= { cefcMIBGroups 19 }
cefcMgmtNotificationsGroup3 NOTIFICATION-GROUP
NOTIFICATIONS { cefcPowerSupplyOutputChange }
STATUS current
DESCRIPTION
"The additional notification for notify the
power capacity mode change."
::= { cefcMIBGroups 20 }
cefcMIBInLinePowerCurrentGroup OBJECT-GROUP
OBJECTS { cefcTotalDrawnInlineCurrent }
STATUS current
DESCRIPTION
"The collection of objects which are used to
monitor inline power usage for FRUs."
::= { cefcMIBGroups 21 }
cefcMIBPowerRedundancyInfoGroup OBJECT-GROUP
OBJECTS { cefcPowerNonRedundantReason }
STATUS current
DESCRIPTION
"The collection of objects provide additional
information about the device's power supply
redundancy."
::= { cefcMIBGroups 22 }
cefcFanCoolingCapGroup OBJECT-GROUP
OBJECTS {
cefcFanCoolingCapModeDescr,
cefcFanCoolingCapCapacity,
cefcFanCoolingCapCurrent
}
STATUS current
DESCRIPTION
"The collection of objects provide the cooling
capacity modes and properties of the fans."
::= { cefcMIBGroups 23 }
cefcMIBModuleLocalSwitchingGroup OBJECT-GROUP
OBJECTS { cefcModuleLocalSwitchingMode }
STATUS current
DESCRIPTION
"The collection of objects which show information of the
local switching status of modules."
::= { cefcMIBGroups 24 }
cefcFRUPowerRealTimeStatusGroup OBJECT-GROUP
OBJECTS { cefcFRURealTimeCurrent }
STATUS current
DESCRIPTION
"The collection of objects provide the power-related
realtime information of the manageable entities."
::= { cefcMIBGroups 25 }
cefcFRUPowerCapabilityGroup OBJECT-GROUP
OBJECTS { cefcFRUPowerCapability }
STATUS current
DESCRIPTION
"The collection of objects provide the power-related
capability information of the manageable entities."
::= { cefcMIBGroups 26 }
cefcFRUCoolingUnitGroup OBJECT-GROUP
OBJECTS {
cefcChassisPerSlotCoolingUnit,
cefcModuleCoolingUnit
}
STATUS current
DESCRIPTION
"The collection of objects provide the cooling unit
information of the manageable entities."
::= { cefcMIBGroups 27 }
cefcFRUFanCoolingUnitGroup OBJECT-GROUP
OBJECTS {
cefcFanCoolingCapacityUnit,
cefcFanCoolingCapCapacityUnit
}
STATUS current
DESCRIPTION
"The collection of objects provide the cooling unit
information of the manageable fan entities."
::= { cefcMIBGroups 28 }
cefcCoolingGroup2 OBJECT-GROUP
OBJECTS {
cefcChassisPerSlotCoolingCap,
cefcModuleCooling
}
STATUS current
DESCRIPTION
"The collection of objects which are used to get the
cooling capacity or requirement information."
::= { cefcMIBGroups 29 }
cefcFanCoolingGroup OBJECT-GROUP
OBJECTS { cefcFanCoolingCapacity }
STATUS current
DESCRIPTION
"The collection of objects provide the cooling
capacity modes and properties of the fans."
::= { cefcMIBGroups 30 }
cefcFanDirectionGroup OBJECT-GROUP
OBJECTS { cefcFanTrayDirection }
STATUS current
DESCRIPTION
"The collection of objects provide the direction
information of the manageable fan entities."
::= { cefcMIBGroups 31 }
cefcFanSpeedGroup OBJECT-GROUP
OBJECTS {
cefcFanSpeed,
cefcFanSpeedPercent
}
STATUS current
DESCRIPTION
"The collection of objects provide the speed
information of the manageable fan entities."
::= { cefcMIBGroups 32 }
cefcPowerSupplyActualGroup OBJECT-GROUP
OBJECTS {
cefcFRUActualInputCurrent,
cefcFRUActualOutputCurrent
}
STATUS current
DESCRIPTION
"The collection of objects which are used to retrieve
the actual input and output current of a power supply."
::= { cefcMIBGroups 33 }
cefcVmModuleGroup OBJECT-GROUP
OBJECTS {
cefcVmModuleOperStatus,
cefcVmModuleStatusLastChangeTime
}
STATUS current
DESCRIPTION
"The collection of objects which povide the VM
module opertional status information."
::= { cefcMIBGroups 34 }
cefcVmModuleNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS { cefcVmModuleStatusChangeNotif }
STATUS current
DESCRIPTION
"A collection of notifications for VM module
status change."
::= { cefcMIBGroups 35 }
END
Reference in a new issue View git blame Copy permalink