Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2218 lines
77 KiB
Text
2218 lines
77 KiB
Text
-- *****************************************************************
|
|
-- CISCO-ENTITY-DIAG-MIB
|
|
-- Definitions of managed objects supporting the Online
|
|
-- Diagnostic Feature
|
|
--
|
|
-- November 2002, Patrick Gili
|
|
-- October 2005, Jayakumar Kadirvelu
|
|
--
|
|
-- Copyright (c) 2002-2010, 2016 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- ****************************************************************
|
|
|
|
CISCO-ENTITY-DIAG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
Unsigned32,
|
|
Gauge32,
|
|
Integer32,
|
|
Counter32,
|
|
OBJECT-TYPE,
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
entPhysicalIndex,
|
|
PhysicalIndex,
|
|
entPhysicalDescr
|
|
FROM ENTITY-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
DateAndTime,
|
|
TruthValue,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
EntPhysicalIndexOrZero
|
|
FROM CISCO-TC
|
|
CeDiagDiagnosticLevel,
|
|
CeDiagDiagnosticMethod,
|
|
CeDiagTestIdentifier,
|
|
CeDiagErrorIdentifier,
|
|
CeDiagErrorIdentifierOrZero,
|
|
CeDiagJobIdentifier,
|
|
CeDiagPortList,
|
|
CeDiagTestList,
|
|
CeDiagJobSuite
|
|
FROM CISCO-ENTITY-DIAG-TC-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoEntityDiagMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201603110000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB module defines the managed objects that describe the
|
|
online diagnostics capabilities supported by the
|
|
physical entities contained by the system, including chassis,
|
|
modules, ports, power supplies, fans, and sensors. In order to
|
|
manage the online diagnostic capabilities supported by
|
|
a physical entity, it must be represented by a conceptual row
|
|
in the entPhysicalTable of the ENTITY-MIB (RFC-2737).
|
|
|
|
GLOSSARY
|
|
|
|
Boot-up Diagnostic - a diagnostic consisting of tests intended
|
|
to be executed in a reasonable timeframe when a physical entity
|
|
boots.
|
|
|
|
Diagnostic - a suite of tests intended to exercise the
|
|
functional integrity of a physical entity.
|
|
|
|
Diagnostic Level - the degree of completeness that a diagnostic
|
|
will exercise a physical entity.
|
|
|
|
Field Diagnostic - a special suite of tests intended to
|
|
exercise the functional integrity of a physical entity in a
|
|
manner that is possible when a physical entity is
|
|
operational or running an operational image.
|
|
|
|
Field Diagnostic Image - an image supporting field diagnostics.
|
|
A physical entity has to be loaded with a field diagnostic
|
|
image before field diagnostics can be executed on the physical
|
|
entity.
|
|
|
|
Health Monitoring - the process of running special
|
|
non-intrusive online tests periodically on a physical entity
|
|
for the purpose of tracking the overall condition of a physical
|
|
entity.
|
|
|
|
On-Demand Diagnostic - a diagnostic intended to be executed
|
|
immediately upon request.
|
|
|
|
Offline Diagnostic - a diagnostic that consists of tests that
|
|
are disruptive in nature, and thus requires the physical entity
|
|
being evaluated to be taken offline for the duration.
|
|
|
|
Online Diagnostic - a diagnostic that consists of tests that
|
|
are not disruptive in nature, and thus can be done without
|
|
taking the physical entity offline.
|
|
|
|
Physical Entity - an identifiable physical resource, such as a
|
|
chassis, line card, power supply, or communication port. See
|
|
RFC-2737, 'Entity MIB (Version 2)', K. McCloghrie and A.
|
|
Bierman.
|
|
|
|
Scheduled Diagnostic - a diagnostic intended to execute at some
|
|
time in the future. There exist two types of scheduled
|
|
diagnostics: 1) one-shot, which execute only once; and 2)
|
|
periodic, which executes at a specific interval.
|
|
|
|
Test - an exercise intended to determine the functional
|
|
integrity of a component comprising a physical entity (e.g., a
|
|
port might support an internal loopback test).
|
|
|
|
Diagnostic Job - Consists of a diagnostic suite
|
|
(i.e., a collection of tests) to be executed by a physical
|
|
entity."
|
|
REVISION "201603110000Z"
|
|
DESCRIPTION
|
|
"Added one new enumaration value disruptive(15)
|
|
to ceDiagTestAttributes"
|
|
REVISION "201005260000Z"
|
|
DESCRIPTION
|
|
"Added ceDiagHMTestThreshWindowGroup."
|
|
REVISION "200906300000Z"
|
|
DESCRIPTION
|
|
"Added ceDiagTestPerfLastTestMethodGroup.
|
|
Updated Description of ceDiagTestPerfLastErrorID object."
|
|
REVISION "200803120000Z"
|
|
DESCRIPTION
|
|
"Added ceDiagNotifControlGroup, ceDiagNotifErrorMsgGroup
|
|
and ceDiagNotificationGroup."
|
|
REVISION "200701090000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { ciscoMgmt 350 }
|
|
|
|
|
|
ciscoEntityDiagMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIB 0 }
|
|
|
|
ciscoEntityDiagMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIB 1 }
|
|
|
|
ciscoEntityDiagMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIB 2 }
|
|
|
|
ceDiagDescriptions OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 1 }
|
|
|
|
ceDiagGlobalConfig OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 2 }
|
|
|
|
ceDiagEntity OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 3 }
|
|
|
|
ceDiagOnDemand OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 4 }
|
|
|
|
ceDiagScheduled OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 5 }
|
|
|
|
ceDiagTest OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 6 }
|
|
|
|
ceDiagHealthMonitor OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 7 }
|
|
|
|
ceDiagEvents OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 8 }
|
|
|
|
ceDiagNotificationControl OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBObjects 9 }
|
|
|
|
-- DiagDescriptions
|
|
|
|
ceDiagTestInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagTestInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the tests supported by each physical
|
|
entity supporting online diagnostics. The table
|
|
organizes tests into sets associated with the physical entity
|
|
supporting those tests.
|
|
|
|
The SNMP entity adds a set of tests corresponding to a physical
|
|
entity upon detection of a physical entity supporting
|
|
online diagnostics.
|
|
|
|
The SNMP entity deletes a set of tests corresponding to a
|
|
physical entity upon removal of the physical entity.
|
|
|
|
The SNMP entity replaces a set of tests corresponding to a
|
|
physical entity when the physical entity has been successfully
|
|
loaded with a different image (e.g., the field diagnostic
|
|
image)."
|
|
::= { ceDiagDescriptions 1 }
|
|
|
|
ceDiagTestInfoEntry OBJECT-TYPE
|
|
SYNTAX CeDiagTestInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of a single test supported by a corresponding
|
|
physical entity."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceDiagTestId
|
|
}
|
|
::= { ceDiagTestInfoTable 1 }
|
|
|
|
CeDiagTestInfoEntry ::= SEQUENCE {
|
|
ceDiagTestId CeDiagTestIdentifier,
|
|
ceDiagTestText SnmpAdminString,
|
|
ceDiagTestAttributes BITS
|
|
}
|
|
|
|
ceDiagTestId OBJECT-TYPE
|
|
SYNTAX CeDiagTestIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an arbitrary positive integer
|
|
arbitrarily identifying the test."
|
|
::= { ceDiagTestInfoEntry 1 }
|
|
|
|
ceDiagTestText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a human-readable description of the
|
|
test. Examples include:
|
|
|
|
'Marching Pattern DRAM Test'
|
|
|
|
'Data Pins DRAM Test'
|
|
|
|
'Internal Loopback Test'
|
|
|
|
'External Loopback Test'"
|
|
::= { ceDiagTestInfoEntry 2 }
|
|
|
|
ceDiagTestAttributes OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
minimal(0),
|
|
complete(1),
|
|
perPort(2),
|
|
fatal(3),
|
|
basicOnDemand(4),
|
|
standby(5),
|
|
parallel(6),
|
|
nonDisruptive(7),
|
|
hmAlwaysEnable(8),
|
|
hmFixedInterval(9),
|
|
nonHM(10),
|
|
proxy(11),
|
|
activeToStandby(12),
|
|
offline(13),
|
|
perDevice(14),
|
|
disruptive(15)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a set of attributes characterizing the
|
|
test:
|
|
|
|
'minimal' - indicates that this test will be executed
|
|
during boot-up if ceDiagBootupLevel is set
|
|
to 'minimal' or 'complete'. This test is
|
|
also included in the minimal or complete
|
|
test suites.
|
|
|
|
'complete' - indicates that this test will be executed
|
|
during boot-up if ceDiagBootupLevel is set
|
|
to 'complete'. This test is also included
|
|
in the complete test suites.
|
|
|
|
'perPort' - indicates that this test is a executed for
|
|
each port contained by the module. This
|
|
test is also included in the perPort test
|
|
suites.
|
|
|
|
'fatal' - indicates that if this test fails, then the
|
|
diagnostic should fail indicating that a
|
|
major error occurred.
|
|
|
|
'basicOnDemand' - indicates that this test will be
|
|
run during the basic on demand job is run.
|
|
|
|
'standby' - indicates that this test can only be run
|
|
if the physical entity is a standby unit
|
|
and can only be executed from the standby
|
|
unit.
|
|
|
|
'parallel' - indicates that this test can be executed in
|
|
parallel with other tests without checking
|
|
for resource availability.
|
|
|
|
'nonDisruptive' - indicates this test can be executed without
|
|
disrupting the physical entity's normal
|
|
operation. This test is also included in
|
|
the nonDisruptive test suites.
|
|
|
|
'hmAlwaysEnabled' - indicates that a management application can
|
|
not disable the use of this test for the
|
|
purpose of health monitoring.
|
|
|
|
'hmFixedInterval' - indicates that a management application can
|
|
not change the interval at which health
|
|
monitoring executes this test.
|
|
|
|
'nonHM' - indicates that this test can not be used for
|
|
health monitoring.
|
|
|
|
'proxy' - indicates that the test must be executed
|
|
through a proxy.
|
|
|
|
'activeToStandby' - indicates that this test can only be run if
|
|
the physical entity is a standby unit and
|
|
can only be executed from the active unit.
|
|
|
|
'offline' - indicates that this test will not get a user
|
|
confirmation when it is run.
|
|
|
|
'perDevice' - indicates that this test is a per device test.
|
|
|
|
'disruptive' - indicates that this test can be executed with
|
|
disrupting the physical entity's normal
|
|
operation. This test is also included in
|
|
the disruptive test suites."
|
|
::= { ceDiagTestInfoEntry 3 }
|
|
|
|
|
|
|
|
ceDiagTestCustomAttributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagTestCustomAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the additional custom based attributes
|
|
of the tests listed in ceDiagTestInfoTable. These are attributes
|
|
which have been customized by the platform supporting the tests."
|
|
::= { ceDiagDescriptions 2 }
|
|
|
|
ceDiagTestCustomAttributeEntry OBJECT-TYPE
|
|
SYNTAX CeDiagTestCustomAttributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of a single custom based attribute for a test
|
|
supported by a corresponding physical entity."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceDiagTestId,
|
|
ceDiagTestCustomAttributeIndex
|
|
}
|
|
::= { ceDiagTestCustomAttributeTable 1 }
|
|
|
|
CeDiagTestCustomAttributeEntry ::= SEQUENCE {
|
|
ceDiagTestCustomAttributeIndex Unsigned32,
|
|
ceDiagTestCustomAttributeDesc SnmpAdminString
|
|
}
|
|
|
|
ceDiagTestCustomAttributeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary integer which identifies the custom based attribute
|
|
of a test."
|
|
::= { ceDiagTestCustomAttributeEntry 1 }
|
|
|
|
ceDiagTestCustomAttributeDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides a textual description of the custom based
|
|
attribute of this test."
|
|
::= { ceDiagTestCustomAttributeEntry 2 }
|
|
|
|
|
|
|
|
ceDiagErrorInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagErrorInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the errors indicated by a system
|
|
supporting online diagnostics."
|
|
::= { ceDiagDescriptions 3 }
|
|
|
|
ceDiagErrorInfoEntry OBJECT-TYPE
|
|
SYNTAX CeDiagErrorInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The description of a single online error."
|
|
INDEX { ceDiagErrorId }
|
|
::= { ceDiagErrorInfoTable 1 }
|
|
|
|
CeDiagErrorInfoEntry ::= SEQUENCE {
|
|
ceDiagErrorId CeDiagErrorIdentifier,
|
|
ceDiagErrorText SnmpAdminString
|
|
}
|
|
|
|
ceDiagErrorId OBJECT-TYPE
|
|
SYNTAX CeDiagErrorIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an arbitrary positive integer
|
|
arbitrarily identifying the error."
|
|
::= { ceDiagErrorInfoEntry 1 }
|
|
|
|
ceDiagErrorText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates a human-readable description of the
|
|
error. Examples include:
|
|
|
|
'DIAG_SUCCESS'
|
|
|
|
'DIAG_FAILURE'
|
|
|
|
'DIAG_NOT_SUPPORT'
|
|
|
|
'DIAG_SKIPPED'"
|
|
::= { ceDiagErrorInfoEntry 2 }
|
|
|
|
|
|
|
|
-- DiagGlobalConfig
|
|
|
|
ceDiagBootupLevel OBJECT-TYPE
|
|
SYNTAX CeDiagDiagnosticLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the level that physical entities will
|
|
execute their boot-up diagnostic."
|
|
DEFVAL { minimal }
|
|
::= { ceDiagGlobalConfig 1 }
|
|
-- DiagEntity
|
|
|
|
ceDiagEntityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagEntityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table supports online diagnostic control and
|
|
status for each physical entity that supporting the feature.
|
|
|
|
The SNMP entity adds a conceptual row to this table
|
|
corresponding to a physical entity upon detection of a physical
|
|
entity supporting online diagnostics.
|
|
|
|
The SNMP entity deletes a conceptual row from this table
|
|
corresponding to a physical entity upon removal of the physical
|
|
entity."
|
|
::= { ceDiagEntity 1 }
|
|
|
|
ceDiagEntityEntry OBJECT-TYPE
|
|
SYNTAX CeDiagEntityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Online diagnostic control and status for a single
|
|
physical entity supporting the feature. Observe that this data
|
|
may not be accurate if the corresponding cefcModuleOperStatus
|
|
(see the CISCO-ENTITY-FRU-CONTROL-MIB for further details) has
|
|
a value of 'boot'."
|
|
INDEX { entPhysicalIndex }
|
|
::= { ceDiagEntityTable 1 }
|
|
|
|
CeDiagEntityEntry ::= SEQUENCE {
|
|
ceDiagEntityBootLevel CeDiagDiagnosticLevel,
|
|
ceDiagEntityImageAdminStatus INTEGER,
|
|
ceDiagEntityImageOperStatus INTEGER,
|
|
ceDiagEntityFieldDiagnosticUrl SnmpAdminString
|
|
}
|
|
|
|
ceDiagEntityBootLevel OBJECT-TYPE
|
|
SYNTAX CeDiagDiagnosticLevel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the level that the physical entity
|
|
executed its boot-up diagnostic."
|
|
::= { ceDiagEntityEntry 1 }
|
|
|
|
ceDiagEntityImageAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operational(1),
|
|
fieldDiagnostic(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the desired image the physical entity
|
|
should be running:
|
|
|
|
'operational' - the physical entity should be running the
|
|
operational image.
|
|
|
|
'fieldDiagnostic' - the physical entity should be running the
|
|
field diagnostic image."
|
|
DEFVAL { operational }
|
|
::= { ceDiagEntityEntry 2 }
|
|
|
|
ceDiagEntityImageOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operational(1),
|
|
fieldDiagnostic(2),
|
|
booting(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the actual image the physical entity is
|
|
running:
|
|
|
|
'operational' - the physical entity is running the
|
|
operational image.
|
|
|
|
'fieldDiagnostic' - the physical entity is running the field
|
|
diagnostic image.
|
|
|
|
'booting' - the physical entity is booting; that is,
|
|
there is no way of determining what image
|
|
the physical entity is running because it
|
|
is currently booting."
|
|
::= { ceDiagEntityEntry 3 }
|
|
|
|
ceDiagEntityFieldDiagnosticUrl OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a URL (see RFC-1630) that specifies the
|
|
location of the field diagnostic image. The following list
|
|
provides some examples of URLs for the field diagnostic:
|
|
|
|
file://disk0:/images/fd001
|
|
Describes a file with the path '/images/fd001' on 'disk0:'
|
|
accessed locally.
|
|
|
|
ftp://pop-server/usr/bin/fd001
|
|
Describes a file with the path '/usr/bin/fd001' on the host
|
|
'pop-server' accessed via FTP.
|
|
|
|
tftp://pop-server/tftpout/fd001
|
|
Describes a file with the path '/tftpout/fd001' on the host
|
|
'pop-server' accessed via TFTP."
|
|
REFERENCE
|
|
"RFC-1630, 'Universal Resource Identifiers in WWW', T.
|
|
Berners-Lee."
|
|
::= { ceDiagEntityEntry 4 }
|
|
|
|
|
|
|
|
ceDiagEntityCurrentTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagEntityCurrentTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the information about the current test
|
|
executing on a physical entity."
|
|
::= { ceDiagEntity 2 }
|
|
|
|
ceDiagEntityCurrentTestEntry OBJECT-TYPE
|
|
SYNTAX CeDiagEntityCurrentTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A test which is currently executing on a particular physical
|
|
entity."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceDiagTestId
|
|
}
|
|
::= { ceDiagEntityCurrentTestTable 1 }
|
|
|
|
CeDiagEntityCurrentTestEntry ::= SEQUENCE {
|
|
ceDiagEntityCurrentTestMethod CeDiagDiagnosticMethod
|
|
}
|
|
|
|
ceDiagEntityCurrentTestMethod OBJECT-TYPE
|
|
SYNTAX CeDiagDiagnosticMethod
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the method used to invoke the diagnostic
|
|
that is executing this test."
|
|
::= { ceDiagEntityCurrentTestEntry 1 }
|
|
|
|
|
|
|
|
-- DiagOnDemand
|
|
|
|
ceDiagOnDemandErrorAllowed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of errors the physical
|
|
entities will allow before aborting an on demand diagnostic job.
|
|
A value of '0' indicates that the an unlimited number of
|
|
errors are allowed for the on demand diagnostic job."
|
|
::= { ceDiagOnDemand 1 }
|
|
|
|
ceDiagOnDemandErrorAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
continue(1),
|
|
stop(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how the physical entities in the
|
|
system are to proceed when they encounter an error during
|
|
an on demand diagnostic job.
|
|
|
|
'continue' - indicates that the physical entities will continue
|
|
executing the on demand job.
|
|
|
|
'stop' - indicates that the physical entities will abort
|
|
the on demand job."
|
|
::= { ceDiagOnDemand 2 }
|
|
|
|
ceDiagOnDemandIterations OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the maximum number of iterations of an
|
|
on demand job."
|
|
::= { ceDiagOnDemand 3 }
|
|
|
|
ceDiagOnDemandJobTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagOnDemandJobEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of on demand jobs currently in the
|
|
system.
|
|
|
|
A row in this table can be created by setting the corresponding
|
|
instance of ceDiagOnDemandJobRowStatus to 'createAndGo'.
|
|
A row can be deleted by setting the corresponding instance of
|
|
ceDiagOnDemandJobRowStatus to 'destroy'. Once the job is
|
|
completed the corresponding row is deleted from the table.
|
|
|
|
The individual results of the tests executed by this job are
|
|
updated in ceDiagTestPerfTable."
|
|
::= { ceDiagOnDemand 4 }
|
|
|
|
ceDiagOnDemandJobEntry OBJECT-TYPE
|
|
SYNTAX CeDiagOnDemandJobEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A on demand job currently executing on a particular physical
|
|
entity which supports on demand diagnostics."
|
|
INDEX { entPhysicalIndex }
|
|
::= { ceDiagOnDemandJobTable 1 }
|
|
|
|
CeDiagOnDemandJobEntry ::= SEQUENCE {
|
|
ceDiagOnDemandJobSuite CeDiagJobSuite,
|
|
ceDiagOnDemandJobTestList CeDiagTestList,
|
|
ceDiagOnDemandJobPortList CeDiagPortList,
|
|
ceDiagOnDemandJobRowStatus RowStatus
|
|
}
|
|
|
|
ceDiagOnDemandJobSuite OBJECT-TYPE
|
|
SYNTAX CeDiagJobSuite
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the various system predefined test
|
|
suites the on demand job can choose from.
|
|
|
|
If the value of this object is 'none', this job will run
|
|
the tests specified by ceDiagOnDemandJobTestList.
|
|
If the value of this object is 'complete', 'minimal',
|
|
'nonDisruptive' or 'perPort' the value of
|
|
ceDiagOnDemandJobTestList is ignored."
|
|
::= { ceDiagOnDemandJobEntry 1 }
|
|
|
|
ceDiagOnDemandJobTestList OBJECT-TYPE
|
|
SYNTAX CeDiagTestList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the user specified diagnostic suite
|
|
(i.e., a set of tests) to be executed by the corresponding
|
|
physical entity.
|
|
|
|
The set of tests supported by this physical entity are
|
|
specified in ceDiagTestInfoTable."
|
|
::= { ceDiagOnDemandJobEntry 2 }
|
|
|
|
ceDiagOnDemandJobPortList OBJECT-TYPE
|
|
SYNTAX CeDiagPortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the list of ports to be exercised by the
|
|
corresponding physical entity when executing the diagnostic
|
|
suite specified for the job."
|
|
::= { ceDiagOnDemandJobEntry 3 }
|
|
|
|
ceDiagOnDemandJobRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status object used to manage the rows in this table.
|
|
When set to active(1) the on demand job is submitted.
|
|
When set to destroy(6) the on demand job is stopped.
|
|
When the value of this object is 'active', values within
|
|
this row cannot be modified, except by deleting and
|
|
re-creating the row."
|
|
::= { ceDiagOnDemandJobEntry 4 }
|
|
|
|
|
|
-- DiagScheduled
|
|
|
|
ceDiagScheduledJobTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagScheduledJobEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of scheduled jobs on the system.
|
|
A row in this table can be created by setting the corresponding
|
|
instance of ceDiagScheduledJobRowStatus to 'createAndGo'.
|
|
A row can be deleted by setting the corresponding instance of
|
|
ceDiagScheduledJobRowStatus to 'destroy'. Once the job is
|
|
completed the corresponding row is deleted from the table.
|
|
The individual results of the tests executed by this job are
|
|
updated in ceDiagTestPerfTable."
|
|
::= { ceDiagScheduled 1 }
|
|
|
|
ceDiagScheduledJobEntry OBJECT-TYPE
|
|
SYNTAX CeDiagScheduledJobEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A job currently scheduled on a particular physical
|
|
entity."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceDiagScheduledJobIndex
|
|
}
|
|
::= { ceDiagScheduledJobTable 1 }
|
|
|
|
CeDiagScheduledJobEntry ::= SEQUENCE {
|
|
ceDiagScheduledJobIndex CeDiagJobIdentifier,
|
|
ceDiagScheduledJobType INTEGER,
|
|
ceDiagScheduledJobStart DateAndTime,
|
|
ceDiagScheduledJobDayOfWeek INTEGER,
|
|
ceDiagScheduledJobTestList CeDiagTestList,
|
|
ceDiagScheduledJobPortList CeDiagPortList,
|
|
ceDiagScheduledJobRowStatus RowStatus,
|
|
ceDiagScheduledJobSuite CeDiagJobSuite
|
|
}
|
|
|
|
ceDiagScheduledJobIndex OBJECT-TYPE
|
|
SYNTAX CeDiagJobIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary non-zero integer value that uniquely identifies a
|
|
single scheduled job with respect to a physical entity."
|
|
::= { ceDiagScheduledJobEntry 1 }
|
|
|
|
ceDiagScheduledJobType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
scheduledOneShot(1),
|
|
scheduledPeriodicDaily(2),
|
|
scheduledPeriodicWeekly(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of the scheduled job.
|
|
|
|
'scheduledOneShot' - the physical entity will invoke
|
|
this job at the time specified
|
|
by ceDiagScheduledJobStart.
|
|
|
|
'scheduledPeriodicDaily' - the physical entity will
|
|
first invoke this job at the time
|
|
specified by
|
|
ceDiagScheduledJobStart and
|
|
continue invoking it daily at the
|
|
same time.
|
|
|
|
'scheduledPeriodicWeekly' - the corresponding physical entity
|
|
will first invoke this job at the
|
|
time and day of the week specified
|
|
by ceDiagScheduledJobStart and
|
|
ceDiagScheduledJobDayOfWeek, and
|
|
continue to invoke it weekly at
|
|
the same time and day."
|
|
::= { ceDiagScheduledJobEntry 2 }
|
|
|
|
ceDiagScheduledJobStart OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies when a scheduled job will be executed.
|
|
|
|
If the value of ceDiagScheduledJobType is 'scheduledOneShot',
|
|
then this object only applies to the first execution of the job.
|
|
|
|
If the value of ceDiagScheduledJobType is
|
|
'scheduledPeriodicDaily' or 'scheduledPeriodicWeekly', then the
|
|
first four octets of this objects should be zero.
|
|
|
|
If the physical entity's job queue already contains a job
|
|
scheduled for execution at this time, then the process of
|
|
submitting the job will fail."
|
|
::= { ceDiagScheduledJobEntry 3 }
|
|
|
|
ceDiagScheduledJobDayOfWeek OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sunday(1),
|
|
monday(2),
|
|
tuesday(3),
|
|
wednesday(4),
|
|
thursday(5),
|
|
friday(6),
|
|
saturday(7),
|
|
notApplicable(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the day of the week for a
|
|
weekly periodic scheduled job. The value of
|
|
of this object must be specified if the value of
|
|
ceDiagScheduledJobType is 'scheduledPeriodicWeekly'.
|
|
|
|
This value of this object is set to 'notApplicable'
|
|
if the value of ceDiagScheduledJobType is 'scheduledOneShot'
|
|
or 'scheduledPeriodicDaily'."
|
|
::= { ceDiagScheduledJobEntry 4 }
|
|
|
|
ceDiagScheduledJobTestList OBJECT-TYPE
|
|
SYNTAX CeDiagTestList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the diagnostic suite (i.e., a set of
|
|
tests) to be executed by the corresponding physical entity.
|
|
|
|
The set of tests supported by this physical entity are
|
|
specified in ceDiagTestInfoTable."
|
|
::= { ceDiagScheduledJobEntry 5 }
|
|
|
|
ceDiagScheduledJobPortList OBJECT-TYPE
|
|
SYNTAX CeDiagPortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the list of ports to be tested by the
|
|
corresponding physical entity when executing the diagnostic
|
|
suite specified for the job."
|
|
::= { ceDiagScheduledJobEntry 6 }
|
|
|
|
ceDiagScheduledJobRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status object used to manage the rows in this table.
|
|
When set to 'active' the scheduled job is submitted.
|
|
When set to destroy(6) the scheduled job is cleared.
|
|
When the value of this object is 'active', values within
|
|
this row cannot be modified, except by deleting and
|
|
re-creating the row."
|
|
::= { ceDiagScheduledJobEntry 7 }
|
|
|
|
ceDiagScheduledJobSuite OBJECT-TYPE
|
|
SYNTAX CeDiagJobSuite
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the various system predefined test
|
|
suites the on scheduled job can choose from.
|
|
|
|
If the value of this object is 'none', this job will run
|
|
the tests specified by ceDiagScheduledJobTestList.
|
|
If the value of this object is 'complete', 'minimal',
|
|
'nonDisruptive' or 'perPort' the value of
|
|
ceDiagScheduledJobTestList is ignored."
|
|
::= { ceDiagScheduledJobEntry 8 }
|
|
|
|
|
|
-- DiagTest
|
|
|
|
ceDiagTestPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagTestPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maintains data concerning the performance of tests
|
|
executed by each physical entity supporting the online
|
|
diagnostic feature. The table organizes tests into sets
|
|
associated with the physical entity supporting those tests.
|
|
|
|
The SNMP entity adds a set of tests corresponding to a physical
|
|
entity upon detection of a physical entity supporting
|
|
online diagnostics.
|
|
|
|
The SNMP entity deletes a set of tests corresponding to a
|
|
physical entity upon removal of the physical entity.
|
|
|
|
The SNMP entity replaces a set of tests corresponding to a
|
|
physical entity when the physical entity has been successfully
|
|
loaded with a different image (e.g., the field diagnostic
|
|
image)."
|
|
::= { ceDiagTest 1 }
|
|
|
|
ceDiagTestPerfEntry OBJECT-TYPE
|
|
SYNTAX CeDiagTestPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data concerning the performance of a single test."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceDiagTestId
|
|
}
|
|
::= { ceDiagTestPerfTable 1 }
|
|
|
|
CeDiagTestPerfEntry ::= SEQUENCE {
|
|
ceDiagTestPerfLastResult INTEGER,
|
|
ceDiagTestPerfLastErrorID CeDiagErrorIdentifierOrZero,
|
|
ceDiagTestPerfLastRun DateAndTime,
|
|
ceDiagTestPerfFirstFail DateAndTime,
|
|
ceDiagTestPerfLastSuccess DateAndTime,
|
|
ceDiagTestPeffLastFail DateAndTime,
|
|
ceDiagTestPerfTotalRuns Counter32,
|
|
ceDiagTestPerfTotalFails Counter32,
|
|
ceDiagTestPerfConsecutiveFails Gauge32,
|
|
ceDiagTestPerfLastTestMethod CeDiagDiagnosticMethod
|
|
}
|
|
|
|
ceDiagTestPerfLastResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
fail(2),
|
|
pass(3),
|
|
skipped(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the result the last time this test was
|
|
executed by the corresponding physical entity:
|
|
|
|
'unknown' - the corresponding physical entity has not executed
|
|
the test.
|
|
|
|
'fail' - the test executed and detected at least one
|
|
failure.
|
|
|
|
'pass' - the test executed without detecting a failure.
|
|
|
|
'skipped' - the test was skipped due to insufficient resources."
|
|
::= { ceDiagTestPerfEntry 1 }
|
|
|
|
ceDiagTestPerfLastErrorID OBJECT-TYPE
|
|
SYNTAX CeDiagErrorIdentifierOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last error code of this test.
|
|
Details of the non-zero error code can be found in the
|
|
corresponding entry in ceDiagErrorInfoTable."
|
|
::= { ceDiagTestPerfEntry 2 }
|
|
|
|
ceDiagTestPerfLastRun OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last time the
|
|
corresponding physical entity executed this test. If the value
|
|
of ceDiagTestPerfLastResult is 'unknown', then the value of
|
|
this object is irrelevant."
|
|
::= { ceDiagTestPerfEntry 3 }
|
|
|
|
ceDiagTestPerfFirstFail OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the first time
|
|
the corresponding physical entity executed this test and it
|
|
failed. The value of this object is irrelevant if the value of
|
|
ceDiagTestPerfTotalFails is 0."
|
|
::= { ceDiagTestPerfEntry 4 }
|
|
|
|
ceDiagTestPerfLastSuccess OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last time the
|
|
corresponding physical entity executed this test and
|
|
it passed. The value 0x0000010100000000 indicates
|
|
that the corresponding physical entity has not
|
|
passed this test yet."
|
|
::= { ceDiagTestPerfEntry 5 }
|
|
|
|
ceDiagTestPeffLastFail OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last time the
|
|
corresponding physical entity executed this test and it failed.
|
|
If the value of ceDiagTestPerfTotalFails is 0, then the value
|
|
of this object is irrelevant."
|
|
::= { ceDiagTestPerfEntry 6 }
|
|
|
|
ceDiagTestPerfTotalRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total number of times the
|
|
corresponding physical entity has executed the test."
|
|
::= { ceDiagTestPerfEntry 7 }
|
|
|
|
ceDiagTestPerfTotalFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the total number of times the
|
|
corresponding physical entity has executed the test and the
|
|
test resulted with a failure."
|
|
::= { ceDiagTestPerfEntry 8 }
|
|
|
|
ceDiagTestPerfConsecutiveFails OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the consecutive number of times the
|
|
corresponding physical entity has executed the test and it has
|
|
failed. The value of this object will be reset to '0' when the
|
|
physical entity executes the test and it succeeds."
|
|
::= { ceDiagTestPerfEntry 9 }
|
|
|
|
ceDiagTestPerfLastTestMethod OBJECT-TYPE
|
|
SYNTAX CeDiagDiagnosticMethod
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the testing method used for the
|
|
last time this test was executed by the corresponding
|
|
physical entity."
|
|
::= { ceDiagTestPerfEntry 10 }
|
|
|
|
|
|
|
|
-- DiagHealthMonitor
|
|
|
|
ceDiagHMSyslogEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the system will generate
|
|
syslog messages due to the tests run by health
|
|
monitor."
|
|
::= { ceDiagHealthMonitor 1 }
|
|
|
|
ceDiagHMTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagHMTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes attributes specific to the health monitor
|
|
for tests supported by a physical entity."
|
|
::= { ceDiagHealthMonitor 2 }
|
|
|
|
ceDiagHMTestEntry OBJECT-TYPE
|
|
SYNTAX CeDiagHMTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The attributes of a single test specific to the health
|
|
monitor."
|
|
INDEX {
|
|
entPhysicalIndex,
|
|
ceDiagTestId
|
|
}
|
|
::= { ceDiagHMTestTable 1 }
|
|
|
|
CeDiagHMTestEntry ::= SEQUENCE {
|
|
ceDiagHMTestEnabled TruthValue,
|
|
ceDiagHMTestIntervalMin Unsigned32,
|
|
ceDiagHMTestIntervalDefault Unsigned32,
|
|
ceDiagHMTestInterval Unsigned32,
|
|
ceDiagHMTestThresholdDefault Unsigned32,
|
|
ceDiagHMTestThreshold Unsigned32,
|
|
ceDiagHMTestThreshWindowSuite INTEGER,
|
|
ceDiagHMTestThreshWindowSize Unsigned32
|
|
}
|
|
|
|
ceDiagHMTestEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether this test is enabled for
|
|
health monitor."
|
|
::= { ceDiagHMTestEntry 1 }
|
|
|
|
ceDiagHMTestIntervalMin OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum interval which the health
|
|
monitor can periodically invoke this test."
|
|
::= { ceDiagHMTestEntry 2 }
|
|
|
|
ceDiagHMTestIntervalDefault OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the default interval which the health
|
|
monitor will periodically invoke this test. A value of '0'
|
|
indicates that the health monitor will not invoke the test."
|
|
::= { ceDiagHMTestEntry 3 }
|
|
|
|
ceDiagHMTestInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval at which the health monitor
|
|
periodically invokes this test. A value of '0' indicates that
|
|
the health monitor will not invoke the test. A value of '0'
|
|
cannot be set."
|
|
::= { ceDiagHMTestEntry 4 }
|
|
|
|
ceDiagHMTestThresholdDefault OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the default consecutive failure
|
|
count threshold. When the specified failure count threshold
|
|
is reached, the diagnostic test result is set to failure.
|
|
A value of '0' indicates that the health monitor will not
|
|
invoke this test."
|
|
::= { ceDiagHMTestEntry 5 }
|
|
|
|
ceDiagHMTestThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the consecutive failure count threshold
|
|
for this test. When the specified failure count threshold is
|
|
reached, the diagnostic test result is set to failure.
|
|
|
|
A value of '0' indicates that there is no failure count
|
|
threshold for this test.
|
|
|
|
This object is used in combination with
|
|
ceDiagHMTestThreshWindowSuite and ceDiagHMTestThreshWindowSize
|
|
to specify a sliding history window for which the threshold
|
|
is monitored.
|
|
|
|
When the value of ceDiagHMTestThreshWindowSuite is
|
|
'default', the sliding history window is in number of test
|
|
runs, with a window size the same as the value of this
|
|
object.
|
|
|
|
If ceDiagHMTestThreshWindowSuite and
|
|
ceDiagHMTestThreshWindowSize are not supported, the failure
|
|
count threshold will be the consecutive failure count threshold."
|
|
::= { ceDiagHMTestEntry 6 }
|
|
|
|
ceDiagHMTestThreshWindowSuite OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
milliseconds(2),
|
|
seconds(3),
|
|
minutes(4),
|
|
hours(5),
|
|
days(6),
|
|
runs(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a sliding history window
|
|
parameter which is used in combination with
|
|
ceDiagHMTestThreshold. When the specified failure count
|
|
threshold is reached in this sliding history window,
|
|
the diagnostic test result is set to failure.
|
|
|
|
'default' - The sliding history window is in number
|
|
of test runs or executions, with a window
|
|
size the same as ceDiagHMTestThreshold.
|
|
|
|
'milliseconds' - The sliding history window is in milli-seconds
|
|
specified by ceDiagHMTestThreshWindowSize.
|
|
|
|
'seconds' - The sliding history window is in seconds
|
|
specified by ceDiagHMTestThreshWindowSize.
|
|
|
|
'minutes' - The sliding history window is in minutes
|
|
specified by ceDiagHMTestThreshWindowSize.
|
|
|
|
'hours' - The sliding history window is in hours
|
|
specified by ceDiagHMTestThreshWindowSize.
|
|
|
|
'days' - The sliding history window is in days
|
|
specified by ceDiagHMTestThreshWindowSize.
|
|
|
|
'runs' - The sliding history window is in number
|
|
of test runs or executions specified by
|
|
ceDiagHMTestThreshWindowSize.
|
|
|
|
When the value of this object is 'default' the user cannot set
|
|
any value for ceDiagHMTestThreshWindowSize.
|
|
When the value of this object is not 'default',
|
|
then the value of ceDiagHMTestThreshWindowSize cannot be zero (0)."
|
|
::= { ceDiagHMTestEntry 7 }
|
|
|
|
ceDiagHMTestThreshWindowSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the sliding history window size.
|
|
|
|
When the value of ceDiagHMTestThreshWindowSuite is 'default', the
|
|
user cannot set any value for this object.
|
|
|
|
The value of zero (0) cannot be set."
|
|
::= { ceDiagHMTestEntry 8 }
|
|
|
|
|
|
|
|
-- DiagEvents
|
|
|
|
ceDiagEventLogSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the maximum number of entries which the
|
|
event log buffer can contain."
|
|
::= { ceDiagEvents 1 }
|
|
|
|
ceDiagEventCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of entries currently stored
|
|
in the event log buffer."
|
|
::= { ceDiagEvents 2 }
|
|
|
|
ceDiagEventMaxQueries OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of query entries allowed in the
|
|
ceDiagEventQueryTable."
|
|
::= { ceDiagEvents 3 }
|
|
|
|
ceDiagEventQueryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagEventQueryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control table used to query the event log buffer. Each row
|
|
instance in the table represents a query with its parameters.
|
|
The resulting data for each instance of a query in this table
|
|
is stored in the ceDiagEventResultTable.
|
|
|
|
A row in this table can be created by setting the corresponding
|
|
instance of ceDiagEventQueryStatus to 'createAndGo'.
|
|
A row can be deleted by setting the corresponding instance of
|
|
ceDiagEventQueryStatus to 'destroy'."
|
|
::= { ceDiagEvents 4 }
|
|
|
|
ceDiagEventQueryEntry OBJECT-TYPE
|
|
SYNTAX CeDiagEventQueryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row of the ceDiagEventQueryTable used to setup
|
|
a event log buffer query to search for diagnostic events.
|
|
The actual search is started by when the value of
|
|
ceDiagEventQueryStatus is set to 'active'."
|
|
INDEX { ceDiagEventQueryIndex }
|
|
::= { ceDiagEventQueryTable 1 }
|
|
|
|
CeDiagEventQueryEntry ::= SEQUENCE {
|
|
ceDiagEventQueryIndex Unsigned32,
|
|
ceDiagEventQueryPhysicalIndex EntPhysicalIndexOrZero,
|
|
ceDiagEventQuerySeverity INTEGER,
|
|
ceDiagEventQueryOwner SnmpAdminString,
|
|
ceDiagEventQueryResultingRows Integer32,
|
|
ceDiagEventQueryStatus RowStatus
|
|
}
|
|
|
|
ceDiagEventQueryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary integer in the range of 1 to
|
|
ceDiagEventMaxQueries to identify this control query."
|
|
::= { ceDiagEventQueryEntry 1 }
|
|
|
|
ceDiagEventQueryPhysicalIndex OBJECT-TYPE
|
|
SYNTAX EntPhysicalIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the physical entity for the event
|
|
log buffer query. A value of zero indicates that the
|
|
query will return events of all physical entities."
|
|
::= { ceDiagEventQueryEntry 2 }
|
|
|
|
ceDiagEventQuerySeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(0),
|
|
info(1),
|
|
warning(2),
|
|
error(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the severity of the event log buffer
|
|
query. A value of 'all' indicates that the search will return
|
|
events of all severities."
|
|
::= { ceDiagEventQueryEntry 3 }
|
|
|
|
ceDiagEventQueryOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The manager entity that configured this entry and is therefore
|
|
using the resources assigned to it. It is used to model an
|
|
administratively assigned name of the owner of a resource.
|
|
It is recommended that this object have one or more the following
|
|
information: IP address, management station name, network
|
|
manager's name, location, or phone number."
|
|
::= { ceDiagEventQueryEntry 4 }
|
|
|
|
ceDiagEventQueryResultingRows OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result status of the query. Possible values are:
|
|
|
|
-1 - Either the query has not been initiated or
|
|
the agent is busy processing this query instance.
|
|
Time to completion of the query processing
|
|
depends on the complexity of the query and
|
|
the number of matches that satisfy this query.
|
|
|
|
0..2147483647 - The search has ended and this is the number of
|
|
rows in the ceDiagEventResultTable, resulting
|
|
from this query."
|
|
::= { ceDiagEventQueryEntry 5 }
|
|
|
|
ceDiagEventQueryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status object used to manage rows in this table.
|
|
When set to 'active', the query to search for diagnostic
|
|
events is initiated. Once a row becomes active, values
|
|
within the row cannot be modified, except by deleting
|
|
and re-creating the row."
|
|
::= { ceDiagEventQueryEntry 6 }
|
|
|
|
|
|
|
|
ceDiagEventResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CeDiagEventResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing event log information corresponding
|
|
to all the completed queries set up in ceDiagEventQueryTable.
|
|
The query result will not become available until the current
|
|
search is completed."
|
|
::= { ceDiagEvents 5 }
|
|
|
|
ceDiagEventResultEntry OBJECT-TYPE
|
|
SYNTAX CeDiagEventResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in ceDiagEventResultTable, containing
|
|
information about an event that matches the search criteria
|
|
set in the corresponding row of ceDiagEventQueryTable."
|
|
INDEX {
|
|
ceDiagEventQueryIndex,
|
|
ceDiagEventResultIndex
|
|
}
|
|
::= { ceDiagEventResultTable 1 }
|
|
|
|
CeDiagEventResultEntry ::= SEQUENCE {
|
|
ceDiagEventResultIndex Unsigned32,
|
|
ceDiagEventResultPhysicalIndex PhysicalIndex,
|
|
ceDiagEventResultPhysicalDescr SnmpAdminString,
|
|
ceDiagEventResultTime DateAndTime,
|
|
ceDiagEventResultSeverity INTEGER,
|
|
ceDiagEventResultLogText SnmpAdminString
|
|
}
|
|
|
|
ceDiagEventResultIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A positive integer which uniquely identifies a result
|
|
entry matching a particular query."
|
|
::= { ceDiagEventResultEntry 1 }
|
|
|
|
ceDiagEventResultPhysicalIndex OBJECT-TYPE
|
|
SYNTAX PhysicalIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the physical entity corresponding
|
|
to this event."
|
|
::= { ceDiagEventResultEntry 2 }
|
|
|
|
ceDiagEventResultPhysicalDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a textual description of physical
|
|
entity corresponding to this event."
|
|
::= { ceDiagEventResultEntry 3 }
|
|
|
|
ceDiagEventResultTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which this event occurred."
|
|
::= { ceDiagEventResultEntry 4 }
|
|
|
|
ceDiagEventResultSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(1),
|
|
warning(2),
|
|
error(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the severity of this event."
|
|
::= { ceDiagEventResultEntry 5 }
|
|
|
|
ceDiagEventResultLogText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The text message of this event."
|
|
::= { ceDiagEventResultEntry 6 }
|
|
|
|
|
|
|
|
ceDiagEventErrorMsg OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error message related to the notification."
|
|
::= { ceDiagEvents 6 }
|
|
|
|
-- Notification Control
|
|
|
|
ceDiagEnableBootUpFailedNotif OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies whether the system produces the
|
|
ceDiagBootUpFailedNotif. A 'false' value will prevent
|
|
ceDiagBootUpFailedNotif notifications from being
|
|
generated by this system."
|
|
::= { ceDiagNotificationControl 1 }
|
|
|
|
ceDiagEnableHMThreshReachedNotif OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies whether the system produces the
|
|
ceDiagHMThresholdReachedNotif. A 'false' value will prevent
|
|
ceDiagHMThresholdReachedNotif notifications from being
|
|
generated by this system."
|
|
::= { ceDiagNotificationControl 2 }
|
|
|
|
ceDiagEnableHMTestRecoverNotif OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies whether the system produces the
|
|
ceDiagHMTestRecoverNotif. A 'false' value will prevent
|
|
ceDiagHMTestRecoverNotif notifications from being
|
|
generated by this system."
|
|
::= { ceDiagNotificationControl 3 }
|
|
|
|
ceDiagEnableSchedTestFailedNotif OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies whether the system produces the
|
|
ceDiagScheduledTestFailedNotif. A 'false' value will prevent
|
|
ceDiagScheduledTestFailedNotif notifications from being
|
|
generated by this system."
|
|
::= { ceDiagNotificationControl 4 }
|
|
|
|
-- Notifications
|
|
|
|
ceDiagBootUpFailedNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalDescr,
|
|
ceDiagEntityBootLevel,
|
|
ceDiagEventErrorMsg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceDiagBootUpFailedNotif is sent if the online diagnostic
|
|
discovers a boot up failure for a physical entity."
|
|
::= { ciscoEntityDiagMIBNotifs 1 }
|
|
|
|
ceDiagHMThresholdReachedNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalDescr,
|
|
ceDiagHMTestThreshold,
|
|
ceDiagTestText,
|
|
ceDiagTestAttributes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceDiagHMThresholdReachedNotif is sent if the number of
|
|
consecutive failure of a Health Monitoring test reaches
|
|
the configured threshold."
|
|
::= { ciscoEntityDiagMIBNotifs 2 }
|
|
|
|
ceDiagHMTestRecoverNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalDescr,
|
|
ceDiagTestText,
|
|
ceDiagTestAttributes
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceDiagHMTestRecoverNotif is sent when no error is
|
|
detected for the first time on the same Health Monitoring test
|
|
which previously triggered ceDiagHMThresholdReachedNotif."
|
|
::= { ciscoEntityDiagMIBNotifs 3 }
|
|
|
|
ceDiagScheduledTestFailedNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
entPhysicalDescr,
|
|
ceDiagTestText,
|
|
ceDiagEventErrorMsg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ceDiagScheduledTestFailedNotif is sent if a scheduled
|
|
test failed."
|
|
::= { ciscoEntityDiagMIBNotifs 4 }
|
|
-- Conformance
|
|
|
|
ciscoEntityDiagMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBConform 1 }
|
|
|
|
ciscoEntityDiagMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoEntityDiagMIBConform 2 }
|
|
|
|
|
|
ciscoEntityDiagMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities that implement the
|
|
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
|
|
strongly recommended for any platform implementing the
|
|
online diagnostic feature."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ceDiagDescrGroup,
|
|
ceDiagGlobalConfigGroup,
|
|
ceDiagEntityGroup,
|
|
ceDiagOnDemandGroup,
|
|
ceDiagScheduledGroup,
|
|
ceDiagTestPerfGroup,
|
|
ceDiagEventGroup
|
|
}
|
|
|
|
GROUP ceDiagEntityImageGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the physical entities in the system
|
|
are capable of running their own diagnostic image."
|
|
|
|
GROUP ceDiagHealthMonitorGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports a health monitor."
|
|
|
|
GROUP ceDiagScheduledJobSuiteGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports scheduled job test suites."
|
|
::= { ciscoEntityDiagMIBCompliances 1 }
|
|
|
|
ciscoEntityDiagMIBComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities that implement the
|
|
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
|
|
strongly recommended for any platform implementing the
|
|
online diagnostic feature.
|
|
|
|
This statement is deprecated and superceded by
|
|
ciscoEntityDiagMIBComplianceRev3."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ceDiagDescrGroup,
|
|
ceDiagGlobalConfigGroup,
|
|
ceDiagEntityGroup,
|
|
ceDiagOnDemandGroup,
|
|
ceDiagScheduledGroup,
|
|
ceDiagTestPerfGroup,
|
|
ceDiagEventGroup
|
|
}
|
|
|
|
GROUP ceDiagEntityImageGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the physical entities in the system
|
|
are capable of running their own diagnostic image."
|
|
|
|
GROUP ceDiagHealthMonitorGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports a health monitor."
|
|
|
|
GROUP ceDiagScheduledJobSuiteGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports scheduled job test suites."
|
|
|
|
GROUP ceDiagNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagNotifErrorMsgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagNotificationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
::= { ciscoEntityDiagMIBCompliances 2 }
|
|
|
|
ciscoEntityDiagMIBComplianceRev3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities that implement the
|
|
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
|
|
strongly recommended for any platform implementing the
|
|
online diagnostic feature.
|
|
|
|
This statement is deprecated and superceded by
|
|
ciscoEntityDiagMIBComplianceRev4."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ceDiagDescrGroup,
|
|
ceDiagGlobalConfigGroup,
|
|
ceDiagEntityGroup,
|
|
ceDiagOnDemandGroup,
|
|
ceDiagScheduledGroup,
|
|
ceDiagTestPerfGroup,
|
|
ceDiagEventGroup
|
|
}
|
|
|
|
GROUP ceDiagEntityImageGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the physical entities in the system
|
|
are capable of running their own diagnostic image."
|
|
|
|
GROUP ceDiagHealthMonitorGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports a health monitor."
|
|
|
|
GROUP ceDiagScheduledJobSuiteGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports scheduled job test suites."
|
|
|
|
GROUP ceDiagNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagNotifErrorMsgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagNotificationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagTestPerfLastTestMethodGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
the last testing method for a diagnostic test."
|
|
::= { ciscoEntityDiagMIBCompliances 3 }
|
|
|
|
ciscoEntityDiagMIBComplianceRev4 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities that implement the
|
|
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
|
|
strongly recommended for any platform implementing the
|
|
online diagnostic feature."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ceDiagDescrGroup,
|
|
ceDiagGlobalConfigGroup,
|
|
ceDiagEntityGroup,
|
|
ceDiagOnDemandGroup,
|
|
ceDiagScheduledGroup,
|
|
ceDiagTestPerfGroup,
|
|
ceDiagEventGroup
|
|
}
|
|
|
|
GROUP ceDiagEntityImageGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the physical entities in the system
|
|
are capable of running their own diagnostic image."
|
|
|
|
GROUP ceDiagHealthMonitorGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports a health monitor."
|
|
|
|
GROUP ceDiagScheduledJobSuiteGroup
|
|
DESCRIPTION
|
|
"The objects defined by this group only need to be
|
|
implemented if the online diagnostic feature
|
|
supports scheduled job test suites."
|
|
|
|
GROUP ceDiagNotifControlGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagNotifErrorMsgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagNotificationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which can provide
|
|
online diagnostic notifications."
|
|
|
|
GROUP ceDiagTestPerfLastTestMethodGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which support sliding
|
|
history window parameters for Health Monitor diagnostic test."
|
|
|
|
GROUP ceDiagHMTestThreshWindowGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which support
|
|
sliding window parameters for health monitor tests."
|
|
|
|
OBJECT ceDiagBootupLevel
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEntityImageAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEntityFieldDiagnosticUrl
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandErrorAllowed
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandErrorAction
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandIterations
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandJobSuite
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandJobTestList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandJobPortList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagOnDemandJobRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1)
|
|
}
|
|
WRITE-SYNTAX INTEGER {
|
|
createAndGo(4),
|
|
destroy(6)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobStart
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobDayOfWeek
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobTestList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobPortList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobRowStatus
|
|
SYNTAX INTEGER {
|
|
active(1)
|
|
}
|
|
WRITE-SYNTAX INTEGER {
|
|
createAndGo(4),
|
|
destroy(6)
|
|
}
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagScheduledJobSuite
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagHMSyslogEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagHMTestEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagHMTestInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagHMTestThreshold
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagHMTestThreshWindowSuite
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagHMTestThreshWindowSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEventLogSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEventQueryPhysicalIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEventQuerySeverity
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEventQueryOwner
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEventQueryStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEnableBootUpFailedNotif
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEnableHMThreshReachedNotif
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEnableHMTestRecoverNotif
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT ceDiagEnableSchedTestFailedNotif
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { ciscoEntityDiagMIBCompliances 4 }
|
|
|
|
-- Units of Conformance
|
|
|
|
ceDiagDescrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagTestText,
|
|
ceDiagTestAttributes,
|
|
ceDiagTestCustomAttributeDesc,
|
|
ceDiagErrorText
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe tests and errors
|
|
supported by each physical entity."
|
|
::= { ciscoEntityDiagMIBGroups 1 }
|
|
|
|
ceDiagGlobalConfigGroup OBJECT-GROUP
|
|
OBJECTS { ceDiagBootupLevel }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe global
|
|
configuration of the online diagnostic feature."
|
|
::= { ciscoEntityDiagMIBGroups 2 }
|
|
|
|
ceDiagEntityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagEntityBootLevel,
|
|
ceDiagEntityCurrentTestMethod
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the state of a
|
|
physical entity with respect ot the online diagnostic
|
|
feature."
|
|
::= { ciscoEntityDiagMIBGroups 3 }
|
|
|
|
ceDiagEntityImageGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagEntityImageAdminStatus,
|
|
ceDiagEntityImageOperStatus,
|
|
ceDiagEntityFieldDiagnosticUrl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the diagnostic
|
|
image which the physical entity is running."
|
|
::= { ciscoEntityDiagMIBGroups 4 }
|
|
|
|
ceDiagOnDemandGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagOnDemandErrorAllowed,
|
|
ceDiagOnDemandErrorAction,
|
|
ceDiagOnDemandIterations,
|
|
ceDiagOnDemandJobSuite,
|
|
ceDiagOnDemandJobTestList,
|
|
ceDiagOnDemandJobPortList,
|
|
ceDiagOnDemandJobRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the diagnostic
|
|
on demand diagnostic jobs on the system."
|
|
::= { ciscoEntityDiagMIBGroups 5 }
|
|
|
|
ceDiagScheduledGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagScheduledJobType,
|
|
ceDiagScheduledJobStart,
|
|
ceDiagScheduledJobDayOfWeek,
|
|
ceDiagScheduledJobTestList,
|
|
ceDiagScheduledJobPortList,
|
|
ceDiagScheduledJobRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the diagnostic
|
|
on demand diagnostic jobs on the system."
|
|
::= { ciscoEntityDiagMIBGroups 6 }
|
|
|
|
ceDiagTestPerfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagTestPerfLastResult,
|
|
ceDiagTestPerfLastErrorID,
|
|
ceDiagTestPerfLastRun,
|
|
ceDiagTestPerfFirstFail,
|
|
ceDiagTestPerfLastSuccess,
|
|
ceDiagTestPeffLastFail,
|
|
ceDiagTestPerfTotalRuns,
|
|
ceDiagTestPerfTotalFails,
|
|
ceDiagTestPerfConsecutiveFails
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the performance
|
|
of tests supported by each physical entity."
|
|
::= { ciscoEntityDiagMIBGroups 7 }
|
|
|
|
ceDiagHealthMonitorGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagHMSyslogEnabled,
|
|
ceDiagHMTestEnabled,
|
|
ceDiagHMTestIntervalMin,
|
|
ceDiagHMTestInterval,
|
|
ceDiagHMTestIntervalDefault,
|
|
ceDiagHMTestThresholdDefault,
|
|
ceDiagHMTestThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe tests and test
|
|
configuration with relating to the health monitor."
|
|
::= { ciscoEntityDiagMIBGroups 8 }
|
|
|
|
ceDiagEventGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagEventLogSize,
|
|
ceDiagEventCount,
|
|
ceDiagEventMaxQueries,
|
|
ceDiagEventQueryPhysicalIndex,
|
|
ceDiagEventQuerySeverity,
|
|
ceDiagEventQueryOwner,
|
|
ceDiagEventQueryResultingRows,
|
|
ceDiagEventQueryStatus,
|
|
ceDiagEventResultPhysicalIndex,
|
|
ceDiagEventResultPhysicalDescr,
|
|
ceDiagEventResultTime,
|
|
ceDiagEventResultSeverity,
|
|
ceDiagEventResultLogText
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe online
|
|
diagnostic event history."
|
|
::= { ciscoEntityDiagMIBGroups 9 }
|
|
|
|
ceDiagScheduledJobSuiteGroup OBJECT-GROUP
|
|
OBJECTS { ceDiagScheduledJobSuite }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the test suite information
|
|
for a diagnostic scheduled job."
|
|
::= { ciscoEntityDiagMIBGroups 10 }
|
|
|
|
ceDiagNotifControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagEnableBootUpFailedNotif,
|
|
ceDiagEnableHMThreshReachedNotif,
|
|
ceDiagEnableHMTestRecoverNotif,
|
|
ceDiagEnableSchedTestFailedNotif
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing enabling/disabling
|
|
of the boot up failed, health monitoring, and
|
|
scheduled job notifications for online diagnostics."
|
|
::= { ciscoEntityDiagMIBGroups 11 }
|
|
|
|
ceDiagNotifErrorMsgGroup OBJECT-GROUP
|
|
OBJECTS { ceDiagEventErrorMsg }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing error message used by
|
|
various notifications."
|
|
::= { ciscoEntityDiagMIBGroups 12 }
|
|
|
|
ceDiagNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ceDiagBootUpFailedNotif,
|
|
ceDiagHMThresholdReachedNotif,
|
|
ceDiagHMTestRecoverNotif,
|
|
ceDiagScheduledTestFailedNotif
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notifications providing for boot up failed, health
|
|
monitoring, and scheduled job within online diagnostics."
|
|
::= { ciscoEntityDiagMIBGroups 13 }
|
|
|
|
ceDiagTestPerfLastTestMethodGroup OBJECT-GROUP
|
|
OBJECTS { ceDiagTestPerfLastTestMethod }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the last testing method
|
|
for a diagnostic test."
|
|
::= { ciscoEntityDiagMIBGroups 14 }
|
|
|
|
ceDiagHMTestThreshWindowGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ceDiagHMTestThreshWindowSuite,
|
|
ceDiagHMTestThreshWindowSize
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of managed objects that describe the sliding
|
|
history window parameters for a Health Monitor diagnostic test."
|
|
::= { ciscoEntityDiagMIBGroups 15 }
|
|
|
|
END
|
|
|
|
|
|
|