Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
531 lines
17 KiB
Text
531 lines
17 KiB
Text
-- *****************************************************************
|
|
-- CISCO-BRIDGE-EXT-MIB.my : Cisco extensions to BRIDGE-MIB
|
|
--
|
|
-- August 2004, Edward Pham
|
|
--
|
|
-- Copyright (c) 2004, 2005, 2008 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
CISCO-BRIDGE-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
dot1dBasePort
|
|
FROM BRIDGE-MIB
|
|
VlanIndex,
|
|
VlanId
|
|
FROM Q-BRIDGE-MIB
|
|
RowStatus,
|
|
TruthValue,
|
|
MacAddress
|
|
FROM SNMPv2-TC
|
|
CiscoPortList,
|
|
CiscoPortListRange
|
|
FROM CISCO-TC
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoBridgeExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200805220000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-lan-switch-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"A MIB module for extending BRIDGE-MIB specified in RFC 1493."
|
|
REVISION "200805220000Z"
|
|
DESCRIPTION
|
|
"Added cbeDot1dOperVlanGroup."
|
|
REVISION "200504070000Z"
|
|
DESCRIPTION
|
|
"Fixed a typo in cbeDot1dTpVlanAgingFromGlobal object
|
|
description."
|
|
REVISION "200412030000Z"
|
|
DESCRIPTION
|
|
"Added cbeDot1dStaticGroup."
|
|
REVISION "200408230000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 401 }
|
|
|
|
|
|
cbExtMIBNotifications OBJECT IDENTIFIER
|
|
::= { ciscoBridgeExtMIB 0 }
|
|
|
|
cbExtMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoBridgeExtMIB 1 }
|
|
|
|
cbExtMIBConformance OBJECT IDENTIFIER
|
|
::= { ciscoBridgeExtMIB 2 }
|
|
|
|
cbeDot1dTp OBJECT IDENTIFIER
|
|
::= { cbExtMIBObjects 1 }
|
|
|
|
cbeDot1dStatic OBJECT IDENTIFIER
|
|
::= { cbExtMIBObjects 2 }
|
|
|
|
cbeDot1dVlan OBJECT IDENTIFIER
|
|
::= { cbExtMIBObjects 3 }
|
|
|
|
|
|
-- The cbeDot1dTp group
|
|
|
|
cbeDot1dTpGlobalAgingTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 10..1000000 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period in seconds for aging out
|
|
dynamically learned forwarding information at
|
|
the device level. Setting this object value to
|
|
zero will disable the aging out action globally
|
|
except at the VLANs where cbeDot1dTpVlanAgingTime
|
|
is configured.
|
|
802.1D-1990 recommends a default of 300 seconds."
|
|
::= { cbeDot1dTp 1 }
|
|
-- cbeDot1dTpVlanTable
|
|
|
|
cbeDot1dTpVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CbeDot1dTpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides the configuration for aging out
|
|
dynamically learned forwarding information at each VLAN.
|
|
This table is populated for each existing VLAN in the
|
|
device as well as non-existing VLANs which have the
|
|
aging out value configured."
|
|
::= { cbeDot1dTp 2 }
|
|
|
|
cbeDot1dTpVlanEntry OBJECT-TYPE
|
|
SYNTAX CbeDot1dTpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the aging out configuration
|
|
and the configuration source of the aging out value
|
|
applied at each VLAN."
|
|
INDEX { cbeDot1dTpVlanIndex }
|
|
::= { cbeDot1dTpVlanTable 1 }
|
|
|
|
CbeDot1dTpVlanEntry ::= SEQUENCE {
|
|
cbeDot1dTpVlanIndex VlanIndex,
|
|
cbeDot1dTpVlanAgingTime Unsigned32,
|
|
cbeDot1dTpVlanAgingFromGlobal TruthValue,
|
|
cbeDot1dTpVlanRowStatus RowStatus
|
|
}
|
|
|
|
cbeDot1dTpVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN number."
|
|
::= { cbeDot1dTpVlanEntry 1 }
|
|
|
|
cbeDot1dTpVlanAgingTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 | 10..1000000 )
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period in seconds for aging out
|
|
dynamically learned forwarding information at
|
|
this VLAN. Setting this object value to zero
|
|
will disable the aging out action for this VLAN.
|
|
802.1D-1990 recommends a default of 300 seconds.
|
|
|
|
This object provides the same functionality as
|
|
dot1dTpAgingTime object in BRIDGE-MIB with one
|
|
exception that setting this object value to zero
|
|
will disable the aging out action for this VLAN."
|
|
DEFVAL { 300 }
|
|
::= { cbeDot1dTpVlanEntry 2 }
|
|
|
|
cbeDot1dTpVlanAgingFromGlobal OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the aging time applied at
|
|
this VLAN is from cbeDot1dTpGlobalAgingTime object
|
|
or not.
|
|
|
|
true(1) indicates the aging time applied at this VLAN is
|
|
from cbeDot1dTpGlobalAgingTime object. When true(1) is
|
|
configured, value of cbeDot1dTpVlanAgingTime object
|
|
in the same row will have the same value as
|
|
cbeDot1dTpGlobalAgingTime object.
|
|
|
|
false(2) indicates the aging time applied at this VLAN is
|
|
from cbeDot1dTpVlanAgingTime object.
|
|
|
|
If users configure cbeDot1dTpVlanAgingTime object in
|
|
the same row while this object value is true(1),
|
|
this object value will be changed to false(2) to reflect
|
|
that the aging time applied at this VLAN is not from
|
|
cbeDot1dTpGlobalAgingTime object."
|
|
DEFVAL { false }
|
|
::= { cbeDot1dTpVlanEntry 3 }
|
|
|
|
cbeDot1dTpVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row entry. This object
|
|
is used to manage creation and deletion of rows in this
|
|
table.
|
|
|
|
To create an entry, users set the value of this object to
|
|
createAndGo(4). To delete an entry, users set the value
|
|
of this object to destroy(6).
|
|
|
|
Deletion of an entry in this table is only allowed
|
|
if the VLAN indicated by its row index object does not
|
|
exist in the device. cbeDot1dTpVlanAgingTime and
|
|
cbeDot1dTpVlanAgingFromGlobal can be modified at any time
|
|
(even while the row is active). If users set the value of
|
|
cbeDot1dTpVlanAgingFromGlobal object to true(1) and
|
|
the VLAN indicated by cbeDot1dTpVlanIndex object in the
|
|
same row does not exist, the entry will be removed from
|
|
this table."
|
|
::= { cbeDot1dTpVlanEntry 4 }
|
|
|
|
|
|
-- The cbeDot1dStatic group
|
|
|
|
cbeDot1dStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CbeDot1dStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing filtering information configured into
|
|
the device by (local or network) management to specify
|
|
the set of bridge ports within a specific range of bridge
|
|
port number for a specific VLAN, to which frames received
|
|
from specific ports and containing specific destination
|
|
addresses are allowed to be forwarded. The value of zero
|
|
in this table as the port number from which frames with a
|
|
specific destination address are received, is used to
|
|
specify all ports for which there is no specific entry
|
|
in this table for that particular destination address.
|
|
Entries are valid for unicast and for group/broadcast
|
|
addresses."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.7.2.
|
|
RFC 1493: dot1dStaticTable."
|
|
::= { cbeDot1dStatic 1 }
|
|
|
|
cbeDot1dStaticEntry OBJECT-TYPE
|
|
SYNTAX CbeDot1dStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry represents filtering information configured into
|
|
the device by (local or network) management specifying the
|
|
set of bridge ports within a specific range of bridge port
|
|
number for a specific VLAN, to which frames received from a
|
|
specific port and containing a specific destination address
|
|
are allowed to be forwarded."
|
|
REFERENCE "IEEE 802.1D-1990: Section 6.7.2."
|
|
INDEX {
|
|
cbeDot1dVlanIndex,
|
|
cbeDot1dStaticAddress,
|
|
cbeDot1dStaticReceivePort,
|
|
cbeDot1dStaticPortRangeIndex
|
|
}
|
|
::= { cbeDot1dStaticTable 1 }
|
|
|
|
CbeDot1dStaticEntry ::= SEQUENCE {
|
|
cbeDot1dVlanIndex VlanIndex,
|
|
cbeDot1dStaticAddress MacAddress,
|
|
cbeDot1dStaticReceivePort Integer32,
|
|
cbeDot1dStaticPortRangeIndex CiscoPortListRange,
|
|
cbeDot1dStaticAllowedToGoTo CiscoPortList,
|
|
cbeDot1dStaticStatus INTEGER
|
|
}
|
|
|
|
cbeDot1dVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of a specific VLAN."
|
|
::= { cbeDot1dStaticEntry 1 }
|
|
|
|
cbeDot1dStaticAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address in a frame to which
|
|
this entry's filtering information applies. This
|
|
object can take the value of a unicast address, a
|
|
group address or the broadcast address."
|
|
REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2."
|
|
::= { cbeDot1dStaticEntry 2 }
|
|
|
|
cbeDot1dStaticReceivePort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the value '0', or the port number of the
|
|
port from which a frame must be received in order
|
|
for this entry's filtering information to apply.
|
|
A value of zero indicates that this entry applies
|
|
on all ports of the bridge for which there is no
|
|
other applicable entry."
|
|
::= { cbeDot1dStaticEntry 3 }
|
|
|
|
cbeDot1dStaticPortRangeIndex OBJECT-TYPE
|
|
SYNTAX CiscoPortListRange
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index that uniquely identifies a particular
|
|
range of bridge port number."
|
|
::= { cbeDot1dStaticEntry 4 }
|
|
|
|
cbeDot1dStaticAllowedToGoTo OBJECT-TYPE
|
|
SYNTAX CiscoPortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of ports in a specific VLAN, in a specific range of
|
|
bridge port number, to which frames received from a specific
|
|
port, destined for a specific MAC address are allowed to be
|
|
forwarded.
|
|
|
|
An entry in this table with the index value of
|
|
cbeDot1dStaticPortRangeIndex being 'oneto2K' and instance
|
|
value of the corresponding cbeDot1dStaticAllowedToGoTo being
|
|
zero-length octet string indicates that frames received in
|
|
the VLAN as specified by this entry's cbeDot1dVlanIndex, from
|
|
a port as specified by this entry's cbeDot1dStaticReceivePort,
|
|
and destined to the MAC address as specified by this entry's
|
|
cbeDot1dStaticAddress, are not allowed to be forwarded to any
|
|
of the ports in this VLAN."
|
|
::= { cbeDot1dStaticEntry 5 }
|
|
|
|
cbeDot1dStaticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
other(1) - this entry is currently in use but
|
|
the conditions under which it will remain
|
|
so differ from the following values.
|
|
invalid(2) - writing this value to the object
|
|
removes the corresponding entry.
|
|
permanent(3) - this entry is currently in use
|
|
and will remain so after the next reset of
|
|
the bridge.
|
|
deleteOnReset(4) - this entry is currently in
|
|
use and will remain so until the next
|
|
reset of the bridge.
|
|
deleteOnTimeout(5) - this entry is currently in
|
|
use and will remain so until it is aged out."
|
|
DEFVAL { permanent }
|
|
::= { cbeDot1dStaticEntry 6 }
|
|
|
|
|
|
-- cbeDot1dVlan group
|
|
|
|
cbeDot1dVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CbeDot1dVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of 802.1D access ports. Every access port
|
|
that is currently associated with a bridge has a
|
|
corresponding entry in this table."
|
|
::= { cbeDot1dVlan 1 }
|
|
|
|
cbeDot1dVlanEntry OBJECT-TYPE
|
|
SYNTAX CbeDot1dVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing VLAN information for a
|
|
particular 802.1D access port."
|
|
INDEX { dot1dBasePort }
|
|
::= { cbeDot1dVlanTable 1 }
|
|
|
|
CbeDot1dVlanEntry ::= SEQUENCE {
|
|
cbeDot1dVlanOperVlan VlanId
|
|
}
|
|
|
|
cbeDot1dVlanOperVlan OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-ID of the VLAN with which the access
|
|
port is currently associated."
|
|
::= { cbeDot1dVlanEntry 1 }
|
|
|
|
|
|
-- Conformance information
|
|
|
|
cbExtMIBCompliances OBJECT IDENTIFIER
|
|
::= { cbExtMIBConformance 1 }
|
|
|
|
cbExtMIBGroups OBJECT IDENTIFIER
|
|
::= { cbExtMIBConformance 2 }
|
|
|
|
|
|
-- Compliance statements
|
|
|
|
cbExtMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for CISCO-BRIDGE-EXT-MIB."
|
|
MODULE -- this module
|
|
GROUP cbeDot1dTpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which
|
|
support global configuration of aging out of
|
|
dynamically learned forwarding information."
|
|
|
|
GROUP cbeDot1dTpVlanGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which
|
|
support disabling of aging out of dynamically
|
|
learned forwarding information at each VLAN."
|
|
::= { cbExtMIBCompliances 1 }
|
|
|
|
cbExtMIBCompliance2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for CISCO-BRIDGE-EXT-MIB."
|
|
MODULE -- this module
|
|
GROUP cbeDot1dTpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which
|
|
support global configuration of aging out of
|
|
dynamically learned forwarding information."
|
|
|
|
GROUP cbeDot1dTpVlanGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which
|
|
support disabling of aging out of dynamically
|
|
learned forwarding information at each VLAN."
|
|
|
|
GROUP cbeDot1dStaticGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
|
|
OBJECT cbeDot1dTpVlanRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The minimal access requirement for this object."
|
|
::= { cbExtMIBCompliances 2 }
|
|
|
|
cbExtMIBCompliance3 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for CISCO-BRIDGE-EXT-MIB."
|
|
MODULE -- this module
|
|
GROUP cbeDot1dTpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which
|
|
support global configuration of aging out of
|
|
dynamically learned forwarding information."
|
|
|
|
GROUP cbeDot1dTpVlanGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices which
|
|
support disabling of aging out of dynamically
|
|
learned forwarding information at each VLAN."
|
|
|
|
GROUP cbeDot1dStaticGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
|
|
GROUP cbeDot1dOperVlanGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
|
|
OBJECT cbeDot1dTpVlanRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"The minimal access requirement for this object."
|
|
::= { cbExtMIBCompliances 3 }
|
|
|
|
-- Units of Conformance
|
|
|
|
cbeDot1dTpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cbeDot1dTpGlobalAgingTime,
|
|
cbeDot1dTpVlanAgingFromGlobal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing timeout period
|
|
for aging out of dynamically learned forwarding
|
|
information at the device level."
|
|
::= { cbExtMIBGroups 1 }
|
|
|
|
cbeDot1dTpVlanGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cbeDot1dTpVlanAgingTime,
|
|
cbeDot1dTpVlanRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing timeout period
|
|
for aging out of dynamically learned forwarding
|
|
information at each VLAN."
|
|
::= { cbExtMIBGroups 2 }
|
|
|
|
cbeDot1dStaticGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cbeDot1dStaticAllowedToGoTo,
|
|
cbeDot1dStaticStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for configuration of static
|
|
filtering information."
|
|
::= { cbExtMIBGroups 3 }
|
|
|
|
cbeDot1dOperVlanGroup OBJECT-GROUP
|
|
OBJECTS { cbeDot1dVlanOperVlan }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects to show the operational VLAN
|
|
information on bridge ports."
|
|
::= { cbExtMIBGroups 4 }
|
|
|
|
END
|
|
|
|
|
|
|