graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/cisco/CERENT-FC-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

2364 lines
79 KiB
Text
Raw Permalink Blame History

-- *****************************************************************
-- *** Warning *** This MIB module has been deprecated.
-- *** Warning *** CERENT-HC-RMON MIB replaces this MIB
-- *** Warning *** from R5.00 onwards.
-- *****************************************************************
-- *****************************************************************
-- CERENT-FC-MIB.mib
-- Cerent Fibre Channel MIB
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CERENT-FC-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32,
Counter64,
Integer32,
MODULE-IDENTITY,
OBJECT-TYPE FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB
CerentPeriod FROM CERENT-TC
cerentModules,
cerentRequirements,
cerentGeneric FROM CERENT-GLOBAL-REGISTRY
;
cerentFcMIB MODULE-IDENTITY
LAST-UPDATED "0302110000Z" -- 2003/Feb/11
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "support@Cisco.com
Postal:
Cisco Systems
1450 N. McDowell Blvd.
Petaluma, CA 94954
Tel: +1-877-323-7368"
DESCRIPTION
"This MIB module defines the managed objects for performance
monitoring of supported Fibre Channel interfaces."
REVISION "0302110000Z" -- 2003/Feb/11
DESCRIPTION
"The initial revision of this MIB."
::= { cerentModules 100 }
-- MIB Object Definitions
cerentFcMIBObjects OBJECT IDENTIFIER ::= { cerentGeneric 60 }
-- groups in this MIB module
cerentFc OBJECT IDENTIFIER
::= { cerentFcMIBObjects 1 }
-- cerentFc
-- This group deals with FC statistics on the Fibre Channel
-- interfaces
cFcStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports the current values of the Fibre channel
stats on the supported interfaces."
::= { cerentFc 1 }
cFcStatsEntry OBJECT-TYPE
SYNTAX CFcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of Fibre Channel statisctics on an interface."
INDEX { ifIndex }
::= { cFcStatsTable 1 }
CFcStatsEntry ::= SEQUENCE {
cFcStatsInvalidOrdSets Counter32,
cFcStatsInvalidOrdSetsHigh Counter32,
cFcStatsEncodingDispErr Counter32,
cFcStatsEncodingDispErrHigh Counter32,
cFcStatsInTotalErr Counter32,
cFcStatsInTotalErrHigh Counter32,
cFcStatsInFramesTrunc Counter32,
cFcStatsInFramesTruncHigh Counter32,
cFcStatsInFramesTooLong Counter32,
cFcStatsInFramesTooLongHigh Counter32,
cFcStatsInFramesBadCRC Counter32,
cFcStatsInFramesBadCRCHigh Counter32,
cFcStatsInFrames Counter32,
cFcStatsInFramesHigh Counter32,
cFcStatsInElements Counter32,
cFcStatsInElementsHigh Counter32,
cFcStatsInDiscards Counter32,
cFcStatsInDiscardsHigh Counter32,
cFcStatsOutFramesBadCRC Counter32,
cFcStatsOutFramesBadCRCHigh Counter32,
cFcStatsOutFrames Counter32,
cFcStatsOutFramesHigh Counter32,
cFcStatsOutElements Counter32,
cFcStatsOutElementsHigh Counter32,
cFcStatsOutDiscards Counter32,
cFcStatsOutDiscardsHigh Counter32,
cFcStatsLinkResets Counter32,
cFcStatsLinkResetsHigh Counter32,
cFcStatsGfpInSBitErr Counter32,
cFcStatsGfpInSBitErrHigh Counter32,
cFcStatsGfpInMBitErr Counter32,
cFcStatsGfpInMBitErrHigh Counter32,
cFcStatsGfpInTypeInvalid Counter32,
cFcStatsGfpInTypeInvalidHigh Counter32,
cFcStatsGfpInSBlkCRCErr Counter32,
cFcStatsGfpInSBlkCRCErrHigh Counter32
}
cFcStatsInvalidOrdSets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of invalid
ordered sets encountered on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInvalidOrdSetsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInvalidOrdSetsHC, which is a 64 bit counter."
::= { cFcStatsEntry 10 }
cFcStatsInvalidOrdSetsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
invalid ordered sets on the particular interface.
If the value of cFcStatsInvalidOrdSets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInvalidOrdSetsHC, which is a 64 bit counter."
::= { cFcStatsEntry 20 }
cFcStatsEncodingDispErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of encoding
disparity errors encountered on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsEncodingDispErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsEncodingDispErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 30 }
cFcStatsEncodingDispErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
encoding disparity errors on the particular interface.
If the value of cFcStatsEncodingDispErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsEncodingDispErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 40 }
cFcStatsInTotalErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the total number of
errors encountered on the particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInTotalErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInTotalErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 50 }
cFcStatsInTotalErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the total number
of errors encountered on the particular interface.
If the value of cFcStatsInTotalErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInTotalErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 60 }
cFcStatsInFramesTrunc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of fibre
channel truncated frames received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesTruncHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTruncHC, which is a 64 bit counter."
::= { cFcStatsEntry 70 }
cFcStatsInFramesTruncHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
fibre channel truncated frames received on this interface.
If the value of cFcStatsInFramesTrunc
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTruncHC, which is a 64 bit counter."
::= { cFcStatsEntry 80 }
cFcStatsInFramesTooLong OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of
fibre channel frames received on this interface
with a length greater than what was agreed to.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesTooLongHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTooLongHC, which is a 64 bit counter."
::= { cFcStatsEntry 90 }
cFcStatsInFramesTooLongHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
fibre channel frames received on this interface
with a length greater than what was agreed to.
If the value of cFcStatsInFramesTooLong
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTooLongHC, which is a 64 bit counter."
::= { cFcStatsEntry 100 }
cFcStatsInFramesBadCRC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of frames received
with invalid CRC, on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesBadCRCHC, which is a 64 bit counter."
::= { cFcStatsEntry 110 }
cFcStatsInFramesBadCRCHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number of
frames received with invalid CRC, on this interface.
If the value of cFcStatsInFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesBadCRCHigh, which is a 64 bit counter."
::= { cFcStatsEntry 120 }
cFcStatsInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
fibre channel frames received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesHC, which is a 64 bit counter."
::= { cFcStatsEntry 130 }
cFcStatsInFramesHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
fibre channel frames received on this interface.
If the value of cFcStatsInFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesHC, which is a 64 bit counter."
::= { cFcStatsEntry 140 }
cFcStatsInElements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
received bytes on the particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInElementsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInElementsHC, which is a 64 bit counter."
::= { cFcStatsEntry 150 }
cFcStatsInElementsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
received bytes on the particular interface.
If the value of cFcStatsInElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInElementsHC, which is a 64 bit counter."
::= { cFcStatsEntry 160 }
cFcStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
received frames on this interface that were
discarded.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInDiscardsHC, which is a 64 bit counter."
::= { cFcStatsEntry 170 }
cFcStatsInDiscardsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
received frames discarded on the particular interface.
If the value of cFcStatsInDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInDiscardsHC, which is a 64 bit counter."
::= { cFcStatsEntry 180 }
cFcStatsOutFramesBadCRC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of frames
transmitted with invalid CRC, on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesBadCRCHC, which is a 64 bit counter."
::= { cFcStatsEntry 190 }
cFcStatsOutFramesBadCRCHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
frames transmitted with invalid CRC, on this interface.
If the value of cFcStatsOutFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesBadCRCHC, which is a 64 bit counter."
::= { cFcStatsEntry 200 }
cFcStatsOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of
fibre channel frames transmitted on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutFramesHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesHC, which is a 64 bit counter."
::= { cFcStatsEntry 210 }
cFcStatsOutFramesHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number
of fibre channel frames transmitted on this interface.
If the value of cFcStatsOutFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesHC, which is a 64 bit counter."
::= { cFcStatsEntry 220 }
cFcStatsOutElements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
trasmitted bytes on the particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutElementsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutElementsHC, which is a 64 bit counter."
::= { cFcStatsEntry 230 }
cFcStatsOutElementsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
transmitted bytes on the particular interface.
If the value of cFcStatsOutElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutElementsHC, which is a 64 bit counter."
::= { cFcStatsEntry 240 }
cFcStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of transmitted
frames on this interface that were discarded.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutDiscardsHC, which is a 64 bit counter."
::= { cFcStatsEntry 250 }
cFcStatsOutDiscardsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of
the number of transmitted
frames on this interface that were discarded.
If the value of cFcStatsOutDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutDiscardsHC, which is a 64 bit counter."
::= { cFcStatsEntry 260 }
cFcStatsLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
link resets detected on this particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsLinkResetsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsLinkResetsHC, which is a 64 bit counter."
::= { cFcStatsEntry 270 }
cFcStatsLinkResetsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
link resets detected on the particular interface.
If the value of cFcStatsLinkResets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsLinkResetsHC, which is a 64 bit counter."
::= { cFcStatsEntry 280 }
cFcStatsGfpInSBitErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
single bit GFP errors received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInSBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSBitErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 290 }
cFcStatsGfpInSBitErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
single bit GFP errors received on this interface.
If the value of cFcStatsGfpInSBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSBitErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 300 }
cFcStatsGfpInMBitErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
multi bit GFP errors received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInMBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInMBitErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 310 }
cFcStatsGfpInMBitErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
multi bit GFP errors received on this interface.
If the value of cFcStatsGfpInMBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInMBitErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 320 }
cFcStatsGfpInTypeInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of GFP frames
received on this interface with an invalid type.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInTypeInvalidHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter."
::= { cFcStatsEntry 330 }
cFcStatsGfpInTypeInvalidHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number
of GFP frames received on this interface with an invalid
type.
If the value of cFcStatsGfpInTypeInvalid
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter."
::= { cFcStatsEntry 340 }
cFcStatsGfpInSBlkCRCErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
GFP super block CRC errors received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInSblkCRCErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 350 }
cFcStatsGfpInSBlkCRCErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
GFP super block CRC errors received on the particular
interface.
If the value of cFcStatsGfpInSblkCRCErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter."
::= { cFcStatsEntry 360 }
-- Fibre Channel HC table (High Capacity 64 bit counters)
cFcStatsHCTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFcStatsHCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports GFP stats on supported Fibre Channel
interfaces."
::= { cerentFc 2 }
cFcStatsHCEntry OBJECT-TYPE
SYNTAX CFcStatsHCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of Fibre channel statisctics on an interface.
All the counters in this table are 64 bits counters and
are useful only to SNMP v2 and v3 managers."
INDEX { ifIndex }
::= { cFcStatsHCTable 1 }
CFcStatsHCEntry ::= SEQUENCE {
cFcStatsInvalidOrdSetsHC Counter64,
cFcStatsEncodingDispErrHC Counter64,
cFcStatsInTotalErrHC Counter64,
cFcStatsInFramesTruncHC Counter64,
cFcStatsInFramesTooLongHC Counter64,
cFcStatsInFramesBadCRCHC Counter64,
cFcStatsInFramesHC Counter64,
cFcStatsInElementsHC Counter64,
cFcStatsInDiscardsHC Counter64,
cFcStatsOutFramesBadCRCHC Counter64,
cFcStatsOutFramesHC Counter64,
cFcStatsOutElementsHC Counter64,
cFcStatsOutDiscardsHC Counter64,
cFcStatsLinkResetsHC Counter64,
cFcStatsGfpInSBitErrHC Counter64,
cFcStatsGfpInMBitErrHC Counter64,
cFcStatsGfpInTypeInvalidHC Counter64,
cFcStatsGfpInSBlkCRCErrHC Counter64
}
cFcStatsInvalidOrdSetsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of invalid ordered
sets encountered on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 10 }
cFcStatsEncodingDispErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of encoding
disparity errors encountered on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 20 }
cFcStatsInTotalErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the total number of
errors encountered on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 30 }
cFcStatsInFramesTruncHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of fibre channel
truncated frames received on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 40 }
cFcStatsInFramesTooLongHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of fibre channel
frames received with a length greater than what was agreed
to on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 50 }
cFcStatsInFramesBadCRCHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of frames received
with invalid CRC, on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 60 }
cFcStatsInFramesHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
fibre channel frames received on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 70 }
cFcStatsInElementsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
bytes received on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 80 }
cFcStatsInDiscardsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
received frames discarded on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 90 }
cFcStatsOutFramesBadCRCHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted
frames with invalid CRC, on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 100 }
cFcStatsOutFramesHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
fibre channel frames transmitted on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 110 }
cFcStatsOutElementsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
bytes transmitted on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 120 }
cFcStatsOutDiscardsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transmitted
frames on this interface that were discarded.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 130 }
cFcStatsLinkResetsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
link resets detected on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 140 }
cFcStatsGfpInSBitErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of single bit
GFP errors received on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 150 }
cFcStatsGfpInMBitErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of multi bit
GFP errors received on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 160 }
cFcStatsGfpInTypeInvalidHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of GFP frames received
on this interface with an invalid type.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 170 }
cFcStatsGfpInSBlkCRCErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of GFP super block
CRC errors received on this interface.
This is a High Capacity ( 64 bit ) counter."
::= { cFcStatsHCEntry 180 }
-- cFcHistTable
cFcHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFcHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports fibre channel stats on supported
interfaces for previous intervals."
::= { cerentFc 3 }
cFcHistEntry OBJECT-TYPE
SYNTAX CFcHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of Fibre Channel stats history on an
interface."
INDEX { ifIndex, cFcHistIntervalType,
cFcHistIntervalNum }
::= { cFcHistTable 1 }
CFcHistEntry ::= SEQUENCE {
cFcHistIntervalType CerentPeriod,
cFcHistIntervalNum INTEGER,
cFcHistInvalidOrdSets Counter32,
cFcHistInvalidOrdSetsHigh Counter32,
cFcHistEncodingDispErr Counter32,
cFcHistEncodingDispErrHigh Counter32,
cFcHistInTotalErr Counter32,
cFcHistInTotalErrHigh Counter32,
cFcHistInFramesTrunc Counter32,
cFcHistInFramesTruncHigh Counter32,
cFcHistInFramesTooLong Counter32,
cFcHistInFramesTooLongHigh Counter32,
cFcHistInFramesBadCRC Counter32,
cFcHistInFramesBadCRCHigh Counter32,
cFcHistInFrames Counter32,
cFcHistInFramesHigh Counter32,
cFcHistInElements Counter32,
cFcHistInElementsHigh Counter32,
cFcHistInDiscards Counter32,
cFcHistInDiscardsHigh Counter32,
cFcHistOutFramesBadCRC Counter32,
cFcHistOutFramesBadCRCHigh Counter32,
cFcHistOutFrames Counter32,
cFcHistOutFramesHigh Counter32,
cFcHistOutElements Counter32,
cFcHistOutElementsHigh Counter32,
cFcHistOutDiscards Counter32,
cFcHistOutDiscardsHigh Counter32,
cFcHistLinkResets Counter32,
cFcHistLinkResetsHigh Counter32,
cFcHistGfpInSBitErr Counter32,
cFcHistGfpInSBitErrHigh Counter32,
cFcHistGfpInMBitErr Counter32,
cFcHistGfpInMBitErrHigh Counter32,
cFcHistGfpInTypeInvalid Counter32,
cFcHistGfpInTypeInvalidHigh Counter32,
cFcHistGfpInSBlkCRCErr Counter32,
cFcHistGfpInSBlkCRCErrHigh Counter32
}
cFcHistIntervalType OBJECT-TYPE
SYNTAX CerentPeriod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the type of interval for which the
data is being obtained."
::= { cFcHistEntry 10 }
cFcHistIntervalNum OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object gives the number of the particular interval
for which the data is being obtained."
::= { cFcHistEntry 20 }
cFcHistInvalidOrdSets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of invalid
ordered sets on the particular interface during this
sampling interval.
This object only shows the lower word value of
the counter. The high word value is given by
cFcHistInvalidOrdSetsHigh.
SNMP v2c or v3 managers can directly use
cFcHistInvalidOrdSetsHC, which is a 64 bit counter."
::= { cFcHistEntry 30 }
cFcHistInvalidOrdSetsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
invalid ordered sets on the particular interface during
this sampling interval.
If the value of cFcHistInvalidOrdSets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInvalidOrdSetsHC, which is a 64 bit counter."
::= { cFcHistEntry 40 }
cFcHistEncodingDispErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of encoding
disparity errors on the particular interface during
this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistEncodingDispErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistEncodingDispErrHC, which is a 64 bit counter."
::= { cFcHistEntry 50 }
cFcHistEncodingDispErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
encoding disparity errors on the particular interface
during this sampling interval.
If the value of cFcHistEncodingDispErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistEncodingDispErrHC, which is a 64 bit counter."
::= { cFcHistEntry 60 }
cFcHistInTotalErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the total number of
errors encountered on this interface during
this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInTotalErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistInTotalErrHC, which is a 64 bit counter."
::= { cFcHistEntry 70 }
cFcHistInTotalErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the total
number of errors encountered on this interface
during this sampling interval.
If the value of cFcHistInTotalErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInTotalErrHC, which is a 64 bit counter."
::= { cFcHistEntry 80 }
cFcHistInFramesTrunc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of fibre channel
truncated frames received on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesTruncHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTruncHC, which is a 64 bit counter."
::= { cFcHistEntry 90 }
cFcHistInFramesTruncHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
fibre channel truncated frames received on this interface
during this sampling interval.
If the value of cFcHistInFramesTrunc
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTruncHC, which is a 64 bit counter."
::= { cFcHistEntry 100 }
cFcHistInFramesTooLong OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of fibre
channel frames received on this interface
during this sampling interval with a length greater
than what was agreed to.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesTooLongHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTooLongHC, which is a 64 bit counter."
::= { cFcHistEntry 110 }
cFcHistInFramesTooLongHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
fibre channel frames received on this interface
during this sampling interval with a length greater
than what was agreed to.
If the value of cFcHistInFramesTooLong
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTooLongHC, which is a 64 bit counter."
::= { cFcHistEntry 120 }
cFcHistInFramesBadCRC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
frames received with invalid CRC, on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesBadCRCHC, which is a 64 bit counter."
::= { cFcHistEntry 130 }
cFcHistInFramesBadCRCHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
frames received with invalid CRC, on this interface
during this sampling interval.
If the value of cFcHistInFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesBadCRCHigh, which is a 64 bit counter."
::= { cFcHistEntry 140 }
cFcHistInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
fibre channel frames received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesHC, which is a 64 bit counter."
::= { cFcHistEntry 150 }
cFcHistInFramesHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
fibre channel frames received on this interface
during this sampling interval.
If the value of cFcHistInFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesHC, which is a 64 bit counter."
::= { cFcHistEntry 160 }
cFcHistInElements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
received bytes on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInElementsHigh.
SNMP v2c or v3 managers can directly use
cFcHistInElementsHC, which is a 64 bit counter."
::= { cFcHistEntry 170 }
cFcHistInElementsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
received bytes on the particular interface
during this sampling interval.
If the value of cFcHistInElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInElementsHC, which is a 64 bit counter."
::= { cFcHistEntry 180 }
cFcHistInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the the number of
received frames discarded on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcHistInDiscardsHC, which is a 64 bit counter."
::= { cFcHistEntry 190 }
cFcHistInDiscardsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number
of received frames discarded on this interface
during this sampling interval.
If the value of cFcHistInDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInDiscardsHC, which is a 64 bit counter."
::= { cFcHistEntry 200 }
cFcHistOutFramesBadCRC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the the number of
frames transmitted with invalid CRC, on this
interface, during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesBadCRCHC, which is a 64 bit counter."
::= { cFcHistEntry 210 }
cFcHistOutFramesBadCRCHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
frames transmitted with invalid CRC, on this
interface, during this sampling interval.
If the value of cFcHistOutFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesBadCRCHC, which is a 64 bit counter."
::= { cFcHistEntry 220 }
cFcHistOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
frames transmitted on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutFramesHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesHC, which is a 64 bit counter."
::= { cFcHistEntry 230 }
cFcHistOutFramesHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
frames transmitted on the particular interface
during this sampling interval.
If the value of cFcHistOutFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesHC, which is a 64 bit counter."
::= { cFcHistEntry 240 }
cFcHistOutElements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
trasmitted bytes on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutElementsHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutElementsHC, which is a 64 bit counter."
::= { cFcHistEntry 250 }
cFcHistOutElementsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number
of transmitted bytes on the particular interface
during this sampling interval.
If the value of cFcHistOutElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutElementsHC, which is a 64 bit counter."
::= { cFcHistEntry 260 }
cFcHistOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of
transmitted frames discarded on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutDiscardsHC, which is a 64 bit counter."
::= { cFcHistEntry 270 }
cFcHistOutDiscardsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
transmitted frames discarded on this interface
during this sampling interval.
If the value of cFcHistOutDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutDiscardsHC, which is a 64 bit counter."
::= { cFcHistEntry 280 }
cFcHistLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
link resets detected on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistLinkResetsHigh.
SNMP v2c or v3 managers can directly use
cFcHistLinkResetsHC, which is a 64 bit counter."
::= { cFcHistEntry 290 }
cFcHistLinkResetsHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
link resets detected on the particular interface
during this interval.
If the value of cFcHistLinkResets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistLinkResetsHC, which is a 64 bit counter."
::= { cFcHistEntry 300 }
cFcHistGfpInSBitErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of
single bit GFP errors received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInSBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBitErrHC, which is a 64 bit counter."
::= { cFcHistEntry 310 }
cFcHistGfpInSBitErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number of
single bit GFP errors received on this interface
during this sampling interval.
If the value of cFcHistGfpInSBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBitErrHC, which is a 64 bit counter."
::= { cFcHistEntry 320 }
cFcHistGfpInMBitErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the number of
multi bit GFP errors received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInMBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInMBitErrHC, which is a 64 bit counter."
::= { cFcHistEntry 330 }
cFcHistGfpInMBitErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
multi bit GFP errors received on this interface
during this sampling interval.
If the value of cFcHistGfpInMBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInMBitErrHC, which is a 64 bit counter."
::= { cFcHistEntry 340 }
cFcHistGfpInTypeInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of received
GFP frames with an invalid type on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInTypeInvalidHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInTypeInvalidHC, which is a 64 bit counter."
::= { cFcHistEntry 350 }
cFcHistGfpInTypeInvalidHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value of the number
of received GFP frames with an invalid type on this
interface, during this sampling interval.
If the value of cFcHistGfpInTypeInvalid
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInTypeInvalidHC, which is a 64 bit counter."
::= { cFcHistEntry 360 }
cFcHistGfpInSBlkCRCErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the value of the number of
super block CRC GFP errors received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInSblkCRCErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter."
::= { cFcHistEntry 370 }
cFcHistGfpInSBlkCRCErrHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the higher word value the number of
super block CRC GFP errors received on this interface
during this sampling interval.
If the value of cFcHistGfpInSblkCRCErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter."
::= { cFcHistEntry 380 }
-- Fibre Channel HC table (High Capacity 64 bit counters)
cFcHistHCTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFcHistHCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reports history of fibre channel stats on
supported Fibre Channel interfaces."
::= { cerentFc 4 }
cFcHistHCEntry OBJECT-TYPE
SYNTAX CFcHistHCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of history of Fibre channel statisctics
on an interface.
All the counters in this table are 64 bits counters and
are useful only to SNMP v2 and v3 managers."
INDEX { ifIndex, cFcHistIntervalType,cFcHistIntervalNum}
::= { cFcHistHCTable 1 }
CFcHistHCEntry ::= SEQUENCE {
cFcHistInvalidOrdSetsHC Counter64,
cFcHistEncodingDispErrHC Counter64,
cFcHistInTotalErrHC Counter64,
cFcHistInFramesTruncHC Counter64,
cFcHistInFramesTooLongHC Counter64,
cFcHistInFramesBadCRCHC Counter64,
cFcHistInFramesHC Counter64,
cFcHistInElementsHC Counter64,
cFcHistInDiscardsHC Counter64,
cFcHistOutFramesBadCRCHC Counter64,
cFcHistOutFramesHC Counter64,
cFcHistOutElementsHC Counter64,
cFcHistOutDiscardsHC Counter64,
cFcHistLinkResetsHC Counter64,
cFcHistGfpInSBitErrHC Counter64,
cFcHistGfpInMBitErrHC Counter64,
cFcHistGfpInTypeInvalidHC Counter64,
cFcHistGfpInSBlkCRCErrHC Counter64
}
cFcHistInvalidOrdSetsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of invalid ordered
sets encountered on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 10 }
cFcHistEncodingDispErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of encoding
disparity errors encountered on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 20 }
cFcHistInTotalErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the total number of
errors encountered on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 30 }
cFcHistInFramesTruncHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of fibre channel
truncated frames received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 40 }
cFcHistInFramesTooLongHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of fibre channel
frames received on this interface during this sampling
interval, with a length greater than what was
agreed to.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 50 }
cFcHistInFramesBadCRCHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of frames
received with an invalid CRC, on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 60 }
cFcHistInFramesHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
frames received on this interface, during this
sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 70 }
cFcHistInElementsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
bytes received on this interface during this
sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 80 }
cFcHistInDiscardsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
received frames discarded on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 90 }
cFcHistOutFramesBadCRCHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
frames transmitted with an invalid CRC,
on this interface during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 100 }
cFcHistOutFramesHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
fibre channel frames transmitted on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 110 }
cFcHistOutElementsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
bytes received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 120 }
cFcHistOutDiscardsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
transmitted frames discarded on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 130 }
cFcHistLinkResetsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
link resets detected on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 140 }
cFcHistGfpInSBitErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of single bit
GFP errors received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 150 }
cFcHistGfpInMBitErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of multi bit
GFP errors received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 160 }
cFcHistGfpInTypeInvalidHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
GFP frames with invalid type received on this
interface, during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 170 }
cFcHistGfpInSBlkCRCErrHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of GFP super
block CRC errors received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter."
::= { cFcHistHCEntry 180 }
-- The cFcAlarm Table
cFcAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFcAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cFcAlarm entries."
::= { cerentFc 5 }
cFcAlarmEntry OBJECT-TYPE
SYNTAX CFcAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic checking
for cFcAlarm conditions."
INDEX { cFcAlarmIndex }
::= { cFcAlarmTable 1 }
CFcAlarmEntry ::= SEQUENCE {
cFcAlarmIndex INTEGER,
cFcAlarmInterval INTEGER,
cFcAlarmVariable OBJECT IDENTIFIER,
cFcAlarmSampleType INTEGER,
cFcAlarmValue Counter32,
cFcAlarmValueHigh Counter32,
cFcAlarmStartupAlarm INTEGER,
cFcAlarmRisingThreshold Integer32,
cFcAlarmRisingThresholdHigh Integer32,
cFcAlarmFallingThreshold Integer32,
cFcAlarmFallingThresholdHigh Integer32,
cFcAlarmStatus INTEGER
}
cFcAlarmIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
cFcAlarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device."
::= { cFcAlarmEntry 10 }
cFcAlarmInterval OBJECT-TYPE
SYNTAX INTEGER(1..8000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval."
::= { cFcAlarmEntry 20 }
cFcAlarmVariable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object identifier of the particular variable to
be sampled."
::= { cFcAlarmEntry 30 }
cFcAlarmSampleType OBJECT-TYPE
SYNTAX INTEGER {
absoluteValue(1),
deltaValue(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds."
::= { cFcAlarmEntry 40 }
cFcAlarmValue OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the statistic during the last sampling
period. For example, if the sample type is
deltaValue, this value will be the difference
between the samples at the beginning and end of the
period. If the sample type is absoluteValue, this
value will be the sampled value at the end of the
period. This is the value that is compared with the
rising and falling thresholds.
This object only shows the lower word value.
The high word value is given by cFcAlarmValueHigh.
The value during the current sampling period is not
made available until the period is completed and will
remain available until the next period completes."
::= { cFcAlarmEntry 50 }
cFcAlarmValueHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The higher word value of the statistic during the
last sampling period.
If the value of cFcAlarmValue
is greater than 4,294,967,295, the higher word
value will be stored in this object."
::= { cFcAlarmEntry 60 }
cFcAlarmStartupAlarm OBJECT-TYPE
SYNTAX INTEGER {
risingcFcAlarm(1),
fallingcFcAlarm(2),
risingOrFallingcFcAlarm(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The cFcAlarm that may be sent when this entry is
set to valid.
If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and cFcAlarmStartupAlarm is equal to
risingcFcAlarm(1) or risingOrFallingAlarm(3), then a
single rising cFcAlarm will be generated. If the
sample after this entry becomes valid is less than
or equal to the fallingThreshold and
cFcAlarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingcFcAlarm(3), then a single falling
alarm will be generated."
::= { cFcAlarmEntry 70 }
cFcAlarmRisingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the
current sampled value is greater than or equal to
this threshold, and the value at the last sampling
interval was less than this threshold, a single
event will be generated. A single event will also
be generated if the first sample after this entry
becomes valid is greater than or equal to this
threshold and the associated cFcAlarmStartupAlarm is
equal to risingcFcAlarm(1) or risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
cFcAlarmFallingThreshold.
This object can only be used to set the lower
word value of the threshold. If the threshold
to be set is greater than 4,294,967,295 then
cFcAlarmRisingThresholdHigh should be used to
set the upper word value of the threshold."
::= { cFcAlarmEntry 80 }
cFcAlarmRisingThresholdHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper word value of the rising threshold for
the sampled statistic.
If the value of threshold to be set in
cFcAlarmRisingThreshold is greater than
4,294,967,295, then this object
should be used to set the upper word value of the
threshold."
::= { cFcAlarmEntry 90 }
cFcAlarmFallingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the
current sampled value is less than or equal to this
threshold, and the value at the last sampling
interval was greater than this threshold, a single
event will be generated. A single event will also
be generated if the first sample after this entry
becomes valid is less than or equal to this
threshold and the associated cFcAlarmStartupAlarm is
equal to fallingcFcAlarm(2) or risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
cFcAlarmRisingThreshold.
This object can only be used to set the lower
word value of the threshold. If the threshold
to be set is greater than 4,294,967,295, then
cFcAlarmFallingThresholdHigh should be used to
set the upper word value of the threshold."
::= { cFcAlarmEntry 100 }
cFcAlarmFallingThresholdHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper word value of the falling threshold for
the sampled statistic.
If the value of threshold to be set in
cFcAlarmFallingThreshold is greater than
4,294,967,295, then this object
should be used to set the upper word value of the
threshold."
::= { cFcAlarmEntry 110 }
cFcAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
{ valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this cFcAlarm entry."
::= { cFcAlarmEntry 120 }
-- MIB Conformance Statements
cerentFcMIBConformance OBJECT IDENTIFIER ::=
{ cerentRequirements 40 }
cerentFcMIBCompliances OBJECT IDENTIFIER ::=
{ cerentFcMIBConformance 1 }
cerentFcMIBGroups OBJECT IDENTIFIER ::=
{ cerentFcMIBConformance 2 }
cerentFcMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for platforms that monitor the
Fibre channel interfaces with respect to error
counters, for the physical layer."
MODULE -- this module
MANDATORY-GROUPS {
cerentFcStatsGroup
}
::= { cerentFcMIBCompliances 1 }
--
-- units of conformance
--
cerentFcStatsGroup OBJECT-GROUP
OBJECTS {
cFcStatsInvalidOrdSets,
cFcStatsInvalidOrdSetsHigh,
cFcStatsEncodingDispErr,
cFcStatsEncodingDispErrHigh,
cFcStatsInTotalErr,
cFcStatsInTotalErrHigh,
cFcStatsInFramesTrunc,
cFcStatsInFramesTruncHigh,
cFcStatsInFramesTooLong,
cFcStatsInFramesTooLongHigh,
cFcStatsInFramesBadCRC,
cFcStatsInFramesBadCRCHigh,
cFcStatsInFrames,
cFcStatsInFramesHigh,
cFcStatsInElements,
cFcStatsInElementsHigh,
cFcStatsInDiscards,
cFcStatsInDiscardsHigh,
cFcStatsOutFramesBadCRC,
cFcStatsOutFramesBadCRCHigh,
cFcStatsOutFrames,
cFcStatsOutFramesHigh,
cFcStatsOutElements,
cFcStatsOutElementsHigh,
cFcStatsOutDiscards,
cFcStatsOutDiscardsHigh,
cFcStatsLinkResets,
cFcStatsLinkResetsHigh,
cFcStatsGfpInSBitErr,
cFcStatsGfpInSBitErrHigh,
cFcStatsGfpInMBitErr,
cFcStatsGfpInMBitErrHigh,
cFcStatsGfpInTypeInvalid,
cFcStatsGfpInTypeInvalidHigh,
cFcStatsGfpInSBlkCRCErr,
cFcStatsGfpInSBlkCRCErrHigh
}
STATUS current
DESCRIPTION
"The collection of objects to give
stats related to the performance
of an fibre channel interface."
::= { cerentFcMIBGroups 1 }
cerentFcHistGroup OBJECT-GROUP
OBJECTS {
cFcHistInvalidOrdSets,
cFcHistInvalidOrdSetsHigh,
cFcHistEncodingDispErr,
cFcHistEncodingDispErrHigh,
cFcHistInTotalErr,
cFcHistInTotalErrHigh,
cFcHistInFramesTrunc,
cFcHistInFramesTruncHigh,
cFcHistInFramesTooLong,
cFcHistInFramesTooLongHigh,
cFcHistInFramesBadCRC,
cFcHistInFramesBadCRCHigh,
cFcHistInFrames,
cFcHistInFramesHigh,
cFcHistInElements,
cFcHistInElementsHigh,
cFcHistInDiscards,
cFcHistInDiscardsHigh,
cFcHistOutFramesBadCRC,
cFcHistOutFramesBadCRCHigh,
cFcHistOutFrames,
cFcHistOutFramesHigh,
cFcHistOutElements,
cFcHistOutElementsHigh,
cFcHistOutDiscards,
cFcHistOutDiscardsHigh,
cFcHistLinkResets,
cFcHistLinkResetsHigh,
cFcHistGfpInSBitErr,
cFcHistGfpInSBitErrHigh,
cFcHistGfpInMBitErr,
cFcHistGfpInMBitErrHigh,
cFcHistGfpInTypeInvalid,
cFcHistGfpInTypeInvalidHigh,
cFcHistGfpInSBlkCRCErr,
cFcHistGfpInSBlkCRCErrHigh
}
STATUS current
DESCRIPTION
"The collection of objects to give
previous stats related to the performance
of an fibre channel interface."
::= { cerentFcMIBGroups 2 }
cerentFcStatsHCGroup OBJECT-GROUP
OBJECTS {
cFcStatsInvalidOrdSetsHC,
cFcStatsEncodingDispErrHC,
cFcStatsInTotalErrHC,
cFcStatsInFramesTruncHC,
cFcStatsInFramesTooLongHC,
cFcStatsInFramesBadCRCHC,
cFcStatsInFramesHC,
cFcStatsInElementsHC,
cFcStatsInDiscardsHC,
cFcStatsOutFramesBadCRCHC,
cFcStatsOutFramesHC,
cFcStatsOutElementsHC,
cFcStatsOutDiscardsHC,
cFcStatsLinkResetsHC,
cFcStatsGfpInSBitErrHC,
cFcStatsGfpInMBitErrHC,
cFcStatsGfpInTypeInvalidHC,
cFcStatsGfpInSBlkCRCErrHC
}
STATUS current
DESCRIPTION
"The collection of 64 bit objects to give
stats related to the performance
of an fibre channel interface."
::= { cerentFcMIBGroups 3 }
cerentFcHistHCGroup OBJECT-GROUP
OBJECTS {
cFcHistInvalidOrdSetsHC,
cFcHistEncodingDispErrHC,
cFcHistInTotalErrHC,
cFcHistInFramesTruncHC,
cFcHistInFramesTooLongHC,
cFcHistInFramesBadCRCHC,
cFcHistInFramesHC,
cFcHistInElementsHC,
cFcHistInDiscardsHC,
cFcHistOutFramesBadCRCHC,
cFcHistOutFramesHC,
cFcHistOutElementsHC,
cFcHistOutDiscardsHC,
cFcHistLinkResetsHC,
cFcHistGfpInSBitErrHC,
cFcHistGfpInMBitErrHC,
cFcHistGfpInTypeInvalidHC,
cFcHistGfpInSBlkCRCErrHC
}
STATUS current
DESCRIPTION
"The collection of 64 bit objects to give
previous stats related to the performance
of an fibre channel interface."
::= { cerentFcMIBGroups 4 }
cerentFcAlarmGroup OBJECT-GROUP
OBJECTS {
cFcAlarmInterval,
cFcAlarmVariable,
cFcAlarmSampleType,
cFcAlarmValue,
cFcAlarmValueHigh,
cFcAlarmStartupAlarm,
cFcAlarmRisingThreshold,
cFcAlarmRisingThresholdHigh,
cFcAlarmFallingThreshold,
cFcAlarmFallingThresholdHigh,
cFcAlarmStatus
}
STATUS current
DESCRIPTION
"The collection of alarm thresholds configured
on fibre channel interfaces."
::= { cerentFcMIBGroups 5 }
END
Reference in a new issue View git blame Copy permalink