Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
2379 lines
60 KiB
Text
2379 lines
60 KiB
Text
--
|
|
--defines ALCOMA-MIB for SNMP agent extension
|
|
--Contents: Global Registration Module
|
|
-- ALCOMA OIDs - Enterprise 12140
|
|
--Version: 4.8
|
|
--Date: 31 August, 2016
|
|
--Developed By: ing.Václav VACEK
|
|
-- SW engineer
|
|
-- ALCOMA a.s.
|
|
|
|
--
|
|
--Copyright (c)2012 By ALCOMA a.s.
|
|
--
|
|
|
|
ALCOMA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
IMPORTS
|
|
enterprises
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM RFC1213-MIB;
|
|
|
|
|
|
alcoma OBJECT IDENTIFIER ::= { enterprises 12140 }
|
|
products OBJECT IDENTIFIER ::= { alcoma 1 }
|
|
alMP OBJECT IDENTIFIER ::= { alcoma 2 }
|
|
alRADIO-RELAY-LINK OBJECT IDENTIFIER ::= { products 1 }
|
|
alNMS OBJECT IDENTIFIER ::= { products 2 }
|
|
|
|
-- Power Source MIB
|
|
-- Parameters (Prefix Par)
|
|
|
|
alStatusLED OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 1 }
|
|
|
|
alEHW OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hardware error."
|
|
::= { alStatusLED 1 }
|
|
|
|
alESR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error in radio."
|
|
::= { alStatusLED 2 }
|
|
|
|
alESL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error on lines."
|
|
::= { alStatusLED 3 }
|
|
|
|
alCA OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Non-standard command activate."
|
|
::= { alStatusLED 4 }
|
|
|
|
local-station OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 2 }
|
|
|
|
alL-General OBJECT IDENTIFIER ::= { local-station 1 }
|
|
|
|
alLSupervisor OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),none(0),terminal(1),local(2),network(3),service(4),alcoma(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Active supervisor."
|
|
::= { alL-General 1 }
|
|
|
|
alLConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),undefined(0),cf2xE1(1),cf4xE1(2),cf1xE2(3),cf1xE1-Ethernet(4),cf1xE3-E1(7),cf1xEthernet(8),
|
|
cf1xEthF-E1(9),
|
|
cf1xEthF-E1-1xE1(10),cf1xEthF-E1-2xE1(11),cf1xEthF-E1-3xE1(12),cf1xEthF-E1-4xE1(13),
|
|
cf1xEthF-E1-5xE1(14),cf1xEthF-E1-6xE1(15),cf1xEthF-E1-7xE1(16),cf1xEthF-E1-8xE1(17),
|
|
cf1xEthF(18),
|
|
cf1xEthF-1xE1(19),cf1xEthF-2xE1(20),cf1xEthF-3xE1(21),cf1xEthF-4xE1(22),
|
|
cf1xEthF-5xE1(23),cf1xEthF-6xE1(24),cf1xEthF-7xE1(25),cf1xEthF-8xE1(26),
|
|
cf2xFEth(27),cf2xFEth-1xE1(28),
|
|
cf4xFEth-2xE1(29),
|
|
cf2xGEth(30),cf2xGEth-SFP100(31),cf2xGEth-SFP1000(32),cf2xGEth-SFPSG(33) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IDU configuration."
|
|
::= { alL-General 2 }
|
|
|
|
alLStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(0),ok(1),warning(2),error(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Station alarm status."
|
|
::= { alL-General 3 }
|
|
|
|
alLHistory OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "History alarm status."
|
|
::= { alL-General 4 }
|
|
|
|
alLIAISL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Automatic AIS ignored."
|
|
::= { alL-General 5 }
|
|
|
|
alLILEVPWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low RX or TX level alarms ignored."
|
|
::= { alL-General 6 }
|
|
|
|
|
|
|
|
alL-ODU OBJECT IDENTIFIER ::= { local-station 2 }
|
|
|
|
alLRX-Level OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal receiver level."
|
|
::= { alL-ODU 1 }
|
|
|
|
alLTX-PWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter power level."
|
|
::= { alL-ODU 2 }
|
|
|
|
alLMode-TX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),manual(1),atpc(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Mode of power control."
|
|
::= { alL-ODU 3 }
|
|
|
|
alLODU-LB OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU line-loopback."
|
|
::= { alL-ODU 4 }
|
|
|
|
alL-Modem OBJECT IDENTIFIER ::= { local-station 3 }
|
|
|
|
alLQuality OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Quality of 4-level modulation."
|
|
::= { alL-Modem 1 }
|
|
|
|
alL-Supply OBJECT IDENTIFIER ::= { local-station 4 }
|
|
|
|
alLVoltage-5V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),high(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V high."
|
|
::= { alL-Supply 1 }
|
|
|
|
alLVoltage-5Vor15V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V or 15V low."
|
|
::= { alL-Supply 2 }
|
|
|
|
alLVoltage-24V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 24V low."
|
|
::= { alL-Supply 3 }
|
|
|
|
alLCurrent-ODU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU current range."
|
|
::= { alL-Supply 4 }
|
|
|
|
alLInput OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input voltage low."
|
|
::= { alL-Supply 5 }
|
|
|
|
alL-IDU OBJECT IDENTIFIER ::= { local-station 5 }
|
|
|
|
alLEEPROM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "EEPROM memory status."
|
|
::= { alL-IDU 1 }
|
|
|
|
alLRAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM memory status."
|
|
::= { alL-IDU 2 }
|
|
|
|
alLBattery OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM backup battery voltage."
|
|
::= { alL-IDU 3 }
|
|
|
|
alLCommIDU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with blocks of IDU."
|
|
::= { alL-IDU 4 }
|
|
|
|
alLCommRMT OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with remote station."
|
|
::= { alL-IDU 5 }
|
|
|
|
alL-MUX OBJECT IDENTIFIER ::= { local-station 6 }
|
|
|
|
alLBER-10E6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-6."
|
|
::= { alL-MUX 1 }
|
|
|
|
alLBER-10E4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-4."
|
|
::= { alL-MUX 2 }
|
|
|
|
alLFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Frame LOSS."
|
|
::= { alL-MUX 3 }
|
|
|
|
alL-PDH1 OBJECT IDENTIFIER ::= { local-station 7 }
|
|
|
|
alLPDHFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "PDH1 frame LOSS."
|
|
::= { alL-PDH1 1 }
|
|
|
|
alLAISPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to PDH1 frame."
|
|
::= { alL-PDH1 2 }
|
|
|
|
alLLLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on PDH1 frame."
|
|
::= { alL-PDH1 3 }
|
|
|
|
alLRLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on PDH1 frame."
|
|
::= { alL-PDH1 4 }
|
|
|
|
alL-Line1 OBJECT IDENTIFIER ::= { local-station 9 }
|
|
|
|
alLOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 1."
|
|
::= { alL-Line1 1 }
|
|
|
|
alILOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 1."
|
|
::= { alL-Line1 2 }
|
|
|
|
alAIS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 1."
|
|
::= { alL-Line1 3 }
|
|
|
|
alAISL1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 1."
|
|
::= { alL-Line1 4 }
|
|
|
|
alLLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 1."
|
|
::= { alL-Line1 5 }
|
|
|
|
alRLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 1."
|
|
::= { alL-Line1 6 }
|
|
|
|
alL-Line2 OBJECT IDENTIFIER ::= { local-station 10 }
|
|
|
|
alLLOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 2."
|
|
::= { alL-Line2 1 }
|
|
|
|
alLILOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 2."
|
|
::= { alL-Line2 2 }
|
|
|
|
alLAIS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 2."
|
|
::= { alL-Line2 3 }
|
|
|
|
alLAISL2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 2."
|
|
::= { alL-Line2 4 }
|
|
|
|
alLLLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 2."
|
|
::= { alL-Line2 5 }
|
|
|
|
alLRLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 2."
|
|
::= { alL-Line2 6 }
|
|
|
|
alL-Line3 OBJECT IDENTIFIER ::= { local-station 11 }
|
|
|
|
alLLOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 3."
|
|
::= { alL-Line3 1 }
|
|
|
|
alLILOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 3."
|
|
::= { alL-Line3 2 }
|
|
|
|
alLAIS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 3."
|
|
::= { alL-Line3 3 }
|
|
|
|
alLAISL3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 3."
|
|
::= { alL-Line3 4 }
|
|
|
|
alLLLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 3."
|
|
::= { alL-Line3 5 }
|
|
|
|
alLRLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 3."
|
|
::= { alL-Line3 6 }
|
|
|
|
alL-Line4 OBJECT IDENTIFIER ::= { local-station 12 }
|
|
|
|
alLLOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 4."
|
|
::= { alL-Line4 1 }
|
|
|
|
alLILOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 4."
|
|
::= { alL-Line4 2 }
|
|
|
|
alLAIS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 4."
|
|
::= { alL-Line4 3 }
|
|
|
|
alLAISL4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 4."
|
|
::= { alL-Line4 4 }
|
|
|
|
alLLLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 4."
|
|
::= { alL-Line4 5 }
|
|
|
|
alLRLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 4."
|
|
::= { alL-Line4 6 }
|
|
|
|
alL-Line5 OBJECT IDENTIFIER ::= { local-station 13 }
|
|
|
|
alLLOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 5."
|
|
::= { alL-Line5 1 }
|
|
|
|
alLILOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 5."
|
|
::= { alL-Line5 2 }
|
|
|
|
alLAIS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 5."
|
|
::= { alL-Line5 3 }
|
|
|
|
alLAISL5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 5."
|
|
::= { alL-Line5 4 }
|
|
|
|
alLLLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 5."
|
|
::= { alL-Line5 5 }
|
|
|
|
alLRLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 5."
|
|
::= { alL-Line5 6 }
|
|
|
|
alL-Line6 OBJECT IDENTIFIER ::= { local-station 14 }
|
|
|
|
alLLOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 6."
|
|
::= { alL-Line6 1 }
|
|
|
|
alLILOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 6."
|
|
::= { alL-Line6 2 }
|
|
|
|
alLAIS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 6."
|
|
::= { alL-Line6 3 }
|
|
|
|
alLAISL6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 6."
|
|
::= { alL-Line6 4 }
|
|
|
|
alLLLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 6."
|
|
::= { alL-Line6 5 }
|
|
|
|
alLRLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 6."
|
|
::= { alL-Line6 6 }
|
|
|
|
alL-Line7 OBJECT IDENTIFIER ::= { local-station 15 }
|
|
|
|
alLLOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 7."
|
|
::= { alL-Line7 1 }
|
|
|
|
alLILOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 7."
|
|
::= { alL-Line7 2 }
|
|
|
|
alLAIS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 7."
|
|
::= { alL-Line7 3 }
|
|
|
|
alLAISL7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 7."
|
|
::= { alL-Line7 4 }
|
|
|
|
alLLLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 7."
|
|
::= { alL-Line7 5 }
|
|
|
|
alLRLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 7."
|
|
::= { alL-Line7 6 }
|
|
|
|
alL-Line8 OBJECT IDENTIFIER ::= { local-station 16 }
|
|
|
|
alLLOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 8."
|
|
::= { alL-Line8 1 }
|
|
|
|
alLILOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 8."
|
|
::= { alL-Line8 2 }
|
|
|
|
alLAIS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 8."
|
|
::= { alL-Line8 3 }
|
|
|
|
alLAISL8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 8."
|
|
::= { alL-Line8 4 }
|
|
|
|
alLLLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 8."
|
|
::= { alL-Line8 5 }
|
|
|
|
alLRLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 8."
|
|
::= { alL-Line8 6 }
|
|
|
|
alL-Line9 OBJECT IDENTIFIER ::= { local-station 17 }
|
|
|
|
alLLOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 9."
|
|
::= { alL-Line9 1 }
|
|
|
|
alLILOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 9."
|
|
::= { alL-Line9 2 }
|
|
|
|
alLAIS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 9."
|
|
::= { alL-Line9 3 }
|
|
|
|
alLAISL9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 9."
|
|
::= { alL-Line9 4 }
|
|
|
|
alLLLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 9."
|
|
::= { alL-Line9 5 }
|
|
|
|
alLRLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 9."
|
|
::= { alL-Line9 6 }
|
|
|
|
alL-Line10 OBJECT IDENTIFIER ::= { local-station 18 }
|
|
|
|
alLLOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 10."
|
|
::= { alL-Line10 1 }
|
|
|
|
alLILOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 10."
|
|
::= { alL-Line10 2 }
|
|
|
|
alLAIS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 10."
|
|
::= { alL-Line10 3 }
|
|
|
|
alLAISL10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 10."
|
|
::= { alL-Line10 4 }
|
|
|
|
alLLLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 10."
|
|
::= { alL-Line10 5 }
|
|
|
|
alLRLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 10."
|
|
::= { alL-Line10 6 }
|
|
|
|
alL-Line11 OBJECT IDENTIFIER ::= { local-station 19 }
|
|
|
|
alLLOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 11."
|
|
::= { alL-Line11 1 }
|
|
|
|
alLILOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 11."
|
|
::= { alL-Line11 2 }
|
|
|
|
alLAIS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 11."
|
|
::= { alL-Line11 3 }
|
|
|
|
alLAISL11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 11."
|
|
::= { alL-Line11 4 }
|
|
|
|
alLLLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 11."
|
|
::= { alL-Line11 5 }
|
|
|
|
alLRLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 11."
|
|
::= { alL-Line11 6 }
|
|
|
|
alL-Line12 OBJECT IDENTIFIER ::= { local-station 20 }
|
|
|
|
alLLOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 12."
|
|
::= { alL-Line12 1 }
|
|
|
|
alLILOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 12."
|
|
::= { alL-Line12 2 }
|
|
|
|
alLAIS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 12."
|
|
::= { alL-Line12 3 }
|
|
|
|
alLAISL12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 12."
|
|
::= { alL-Line12 4 }
|
|
|
|
alLLLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 12."
|
|
::= { alL-Line12 5 }
|
|
|
|
alLRLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 12."
|
|
::= { alL-Line12 6 }
|
|
|
|
remote-station OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 3 }
|
|
|
|
alR-General OBJECT IDENTIFIER ::= { remote-station 1 }
|
|
|
|
alRSupervisor OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),none(0),terminal(1),local(2),network(3),service(4),alcoma(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Active supervisor."
|
|
::= { alR-General 1 }
|
|
|
|
alRConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),undefined(0),cf2xE1(1),cf4xE1(2),cf1xE2(3),cf1xE1-Ethernet(4),cf1xE3-E1(7),cf1xEthernet(8),
|
|
cf1xEthF-E1(9),
|
|
cf1xEthF-E1-1xE1(10),cf1xEthF-E1-2xE1(11),cf1xEthF-E1-3xE1(12),cf1xEthF-E1-4xE1(13),
|
|
cf1xEthF-E1-5xE1(14),cf1xEthF-E1-6xE1(15),cf1xEthF-E1-7xE1(16),cf1xEthF-E1-8xE1(17),
|
|
cf1xEthF(18),
|
|
cf1xEthF-1xE1(19),cf1xEthF-2xE1(20),cf1xEthF-3xE1(21),cf1xEthF-4xE1(22),
|
|
cf1xEthF-5xE1(23),cf1xEthF-6xE1(24),cf1xEthF-7xE1(25),cf1xEthF-8xE1(26),
|
|
cf2xFEth(27),cf2xFEth-1xE1(28),
|
|
cf4xFEth-2xE1(29),
|
|
cf2xGEth(30),cf2xGEth-SFP100(31),cf2xGEth-SFP1000(32),cf2xGEth-SFPSG(33) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IDU configuration."
|
|
::= { alR-General 2 }
|
|
|
|
alRStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(0),ok(1),warning(2),error(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Station alarm status."
|
|
::= { alR-General 3 }
|
|
|
|
alRHistory OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "History alarm status."
|
|
::= { alR-General 4 }
|
|
|
|
alRIAISL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Automatic AIS ignored."
|
|
::= { alR-General 5 }
|
|
|
|
alRILEVPWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low RX or TX level alarms ignored."
|
|
::= { alR-General 6 }
|
|
|
|
alR-ODU OBJECT IDENTIFIER ::= { remote-station 2 }
|
|
|
|
alRRX-Level OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal receiver level."
|
|
::= { alR-ODU 1 }
|
|
|
|
alRTX-PWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter power level."
|
|
::= { alR-ODU 2 }
|
|
|
|
alRMode-TX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),manual(1),atpc(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Mode of power control."
|
|
::= { alR-ODU 3 }
|
|
|
|
alRODU-LB OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU line-loopback."
|
|
::= { alR-ODU 4 }
|
|
|
|
alR-Modem OBJECT IDENTIFIER ::= { remote-station 3 }
|
|
|
|
alRQuality OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Quality of 4-level modulation."
|
|
::= { alR-Modem 1 }
|
|
|
|
alR-Supply OBJECT IDENTIFIER ::= { remote-station 4 }
|
|
|
|
alRVoltage-5V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),high(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V high."
|
|
::= { alR-Supply 1 }
|
|
|
|
alRVoltage-5Vor15V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V or 15V low."
|
|
::= { alR-Supply 2 }
|
|
|
|
alRVoltage-24V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 24V low."
|
|
::= { alR-Supply 3 }
|
|
|
|
alRCurrent-ODU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU current range."
|
|
::= { alR-Supply 4 }
|
|
|
|
alRInput OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input voltage low."
|
|
::= { alR-Supply 5 }
|
|
|
|
alR-IDU OBJECT IDENTIFIER ::= { remote-station 5 }
|
|
|
|
alREEPROM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "EEPROM memory status."
|
|
::= { alR-IDU 1 }
|
|
|
|
alRRAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM memory status."
|
|
::= { alR-IDU 2 }
|
|
|
|
alRBattery OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM backup battery voltage."
|
|
::= { alR-IDU 3 }
|
|
|
|
alRCommIDU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with blocks of IDU."
|
|
::= { alR-IDU 4 }
|
|
|
|
alRCommRMT OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with remote station."
|
|
::= { alR-IDU 5 }
|
|
|
|
alR-MUX OBJECT IDENTIFIER ::= { remote-station 6 }
|
|
|
|
alRBER-10E6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-6."
|
|
::= { alR-MUX 1 }
|
|
|
|
alRBER-10E4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-4."
|
|
::= { alR-MUX 2 }
|
|
|
|
alRFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Frame LOSS."
|
|
::= { alR-MUX 3 }
|
|
|
|
alR-PDH1 OBJECT IDENTIFIER ::= { remote-station 7 }
|
|
|
|
alRPDHFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "PDH1 frame LOSS."
|
|
::= { alR-PDH1 1 }
|
|
|
|
alRAISPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to frame PDH1."
|
|
::= { alR-PDH1 2 }
|
|
|
|
alRLLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on PDH1 frame."
|
|
::= { alR-PDH1 3 }
|
|
|
|
alRRLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on PDH1 frame."
|
|
::= { alR-PDH1 4 }
|
|
|
|
alR-Line1 OBJECT IDENTIFIER ::= { remote-station 9 }
|
|
|
|
alRLOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 1."
|
|
::= { alR-Line1 1 }
|
|
|
|
alRILOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 1."
|
|
::= { alR-Line1 2 }
|
|
|
|
alRAIS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 1."
|
|
::= { alR-Line1 3 }
|
|
|
|
alRAISL1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 1."
|
|
::= { alR-Line1 4 }
|
|
|
|
alRLLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 1."
|
|
::= { alR-Line1 5 }
|
|
|
|
alRRLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 1."
|
|
::= { alR-Line1 6 }
|
|
|
|
alR-Line2 OBJECT IDENTIFIER ::= { remote-station 10 }
|
|
|
|
alRLOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 2."
|
|
::= { alR-Line2 1 }
|
|
|
|
alRILOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 2."
|
|
::= { alR-Line2 2 }
|
|
|
|
alRAIS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 2."
|
|
::= { alR-Line2 3 }
|
|
|
|
alRAISL2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 2."
|
|
::= { alR-Line2 4 }
|
|
|
|
alRLLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 2."
|
|
::= { alR-Line2 5 }
|
|
|
|
alRRLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 2."
|
|
::= { alR-Line2 6 }
|
|
|
|
alR-Line3 OBJECT IDENTIFIER ::= { remote-station 11 }
|
|
|
|
alRLOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 3."
|
|
::= { alR-Line3 1 }
|
|
|
|
alRILOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 3."
|
|
::= { alR-Line3 2 }
|
|
|
|
alRAIS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 3."
|
|
::= { alR-Line3 3 }
|
|
|
|
alRAISL3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 3."
|
|
::= { alR-Line3 4 }
|
|
|
|
alRLLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 3."
|
|
::= { alR-Line3 5 }
|
|
|
|
alRRLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 3."
|
|
::= { alR-Line3 6 }
|
|
|
|
alR-Line4 OBJECT IDENTIFIER ::= { remote-station 12 }
|
|
|
|
alRLOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 4."
|
|
::= { alR-Line4 1 }
|
|
|
|
alRILOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 4."
|
|
::= { alR-Line4 2 }
|
|
|
|
alRAIS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 4."
|
|
::= { alR-Line4 3 }
|
|
|
|
alRAISL4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 4."
|
|
::= { alR-Line4 4 }
|
|
|
|
alRLLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 4."
|
|
::= { alR-Line4 5 }
|
|
|
|
alRRLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 4."
|
|
::= { alR-Line4 6 }
|
|
|
|
alR-Line5 OBJECT IDENTIFIER ::= { remote-station 13 }
|
|
|
|
alRLOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 5."
|
|
::= { alR-Line5 1 }
|
|
|
|
alRILOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 5."
|
|
::= { alR-Line5 2 }
|
|
|
|
alRAIS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 5."
|
|
::= { alR-Line5 3 }
|
|
|
|
alRAISL5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 5."
|
|
::= { alR-Line5 4 }
|
|
|
|
alRLLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 5."
|
|
::= { alR-Line5 5 }
|
|
|
|
alRRLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 5."
|
|
::= { alR-Line5 6 }
|
|
|
|
alR-Line6 OBJECT IDENTIFIER ::= { remote-station 14 }
|
|
|
|
alRLOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 6."
|
|
::= { alR-Line6 1 }
|
|
|
|
alRILOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 6."
|
|
::= { alR-Line6 2 }
|
|
|
|
alRAIS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 6."
|
|
::= { alR-Line6 3 }
|
|
|
|
alRAISL6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 6."
|
|
::= { alR-Line6 4 }
|
|
|
|
alRLLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 6."
|
|
::= { alR-Line6 5 }
|
|
|
|
alRRLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 6."
|
|
::= { alR-Line6 6 }
|
|
|
|
alR-Line7 OBJECT IDENTIFIER ::= { remote-station 15 }
|
|
|
|
alRLOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 7."
|
|
::= { alR-Line7 1 }
|
|
|
|
alRILOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 7."
|
|
::= { alR-Line7 2 }
|
|
|
|
alRAIS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 7."
|
|
::= { alR-Line7 3 }
|
|
|
|
alRAISL7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 7."
|
|
::= { alR-Line7 4 }
|
|
|
|
alRLLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 7."
|
|
::= { alR-Line7 5 }
|
|
|
|
alRRLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 7."
|
|
::= { alR-Line7 6 }
|
|
|
|
alR-Line8 OBJECT IDENTIFIER ::= { remote-station 16 }
|
|
|
|
alRLOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 8."
|
|
::= { alR-Line8 1 }
|
|
|
|
alRILOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 8."
|
|
::= { alR-Line8 2 }
|
|
|
|
alRAIS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 8."
|
|
::= { alR-Line8 3 }
|
|
|
|
alRAISL8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 8."
|
|
::= { alR-Line8 4 }
|
|
|
|
alRLLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 8."
|
|
::= { alR-Line8 5 }
|
|
|
|
alRRLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 8."
|
|
::= { alR-Line8 6 }
|
|
|
|
alR-Line9 OBJECT IDENTIFIER ::= { remote-station 17 }
|
|
|
|
alRLOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 9."
|
|
::= { alR-Line9 1 }
|
|
|
|
alRILOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 9."
|
|
::= { alR-Line9 2 }
|
|
|
|
alRAIS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 9."
|
|
::= { alR-Line9 3 }
|
|
|
|
alRAISL9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 9."
|
|
::= { alR-Line9 4 }
|
|
|
|
alRLLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 9."
|
|
::= { alR-Line9 5 }
|
|
|
|
alRRLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 9."
|
|
::= { alR-Line9 6 }
|
|
|
|
alR-Line10 OBJECT IDENTIFIER ::= { remote-station 18 }
|
|
|
|
alRLOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 10."
|
|
::= { alR-Line10 1 }
|
|
|
|
alRILOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 10."
|
|
::= { alR-Line10 2 }
|
|
|
|
alRAIS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 10."
|
|
::= { alR-Line10 3 }
|
|
|
|
alRAISL10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 10."
|
|
::= { alR-Line10 4 }
|
|
|
|
alRLLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 10."
|
|
::= { alR-Line10 5 }
|
|
|
|
alRRLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 10."
|
|
::= { alR-Line10 6 }
|
|
|
|
alR-Line11 OBJECT IDENTIFIER ::= { remote-station 19 }
|
|
|
|
alRLOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 11."
|
|
::= { alR-Line11 1 }
|
|
|
|
alRILOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 11."
|
|
::= { alR-Line11 2 }
|
|
|
|
alRAIS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 11."
|
|
::= { alR-Line11 3 }
|
|
|
|
alRAISL11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 11."
|
|
::= { alR-Line11 4 }
|
|
|
|
alRLLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 11."
|
|
::= { alR-Line11 5 }
|
|
|
|
alRRLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 11."
|
|
::= { alR-Line11 6 }
|
|
|
|
alR-Line12 OBJECT IDENTIFIER ::= { remote-station 20 }
|
|
|
|
alRLOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 12."
|
|
::= { alR-Line12 1 }
|
|
|
|
alRILOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 12."
|
|
::= { alR-Line12 2 }
|
|
|
|
alRAIS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 12."
|
|
::= { alR-Line12 3 }
|
|
|
|
alRAISL12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 12."
|
|
::= { alR-Line12 4 }
|
|
|
|
alRLLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 12."
|
|
::= { alR-Line12 5 }
|
|
|
|
alRRLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 12."
|
|
::= { alR-Line12 6 }
|
|
|
|
alRRLTrap OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 4 }
|
|
|
|
alLast-Message OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Message giving more detailed information on change of alarms status."
|
|
::= { alRRLTrap 1 }
|
|
|
|
traps OBJECT IDENTIFIER ::= { alcoma 0 }
|
|
|
|
generalOFF OBJECT IDENTIFIER ::= { traps 1 }
|
|
generalOK OBJECT IDENTIFIER ::= { traps 2 }
|
|
generalWAR OBJECT IDENTIFIER ::= { traps 3 }
|
|
generalERR OBJECT IDENTIFIER ::= { traps 4 }
|
|
receiverLowAlarmOn OBJECT IDENTIFIER ::= { traps 5 }
|
|
receiverLowAlarmOff OBJECT IDENTIFIER ::= { traps 6 }
|
|
transmitterLowAlarmOn OBJECT IDENTIFIER ::= { traps 7 }
|
|
transmitterLowAlarmOff OBJECT IDENTIFIER ::= { traps 8 }
|
|
signalQualityAlarmOn OBJECT IDENTIFIER ::= { traps 9 }
|
|
signalQualityAlarmOff OBJECT IDENTIFIER ::= { traps 10 }
|
|
ber6EAlarmOn OBJECT IDENTIFIER ::= { traps 11 }
|
|
ber6EAlarmOff OBJECT IDENTIFIER ::= { traps 12 }
|
|
ber4EAlarmOn OBJECT IDENTIFIER ::= { traps 13 }
|
|
ber4EAlarmOff OBJECT IDENTIFIER ::= { traps 14 }
|
|
inputSupplyAlarmOn OBJECT IDENTIFIER ::= { traps 15 }
|
|
inputSupplyAlarmOff OBJECT IDENTIFIER ::= { traps 16 }
|
|
aisFromLineAlarmOn OBJECT IDENTIFIER ::= { traps 17 }
|
|
aisFromLineAlarmOff OBJECT IDENTIFIER ::= { traps 18 }
|
|
aisToLineAlarmOn OBJECT IDENTIFIER ::= { traps 19 }
|
|
aisToLineAlarmOff OBJECT IDENTIFIER ::= { traps 20 }
|
|
aisToPdhAlarmOn OBJECT IDENTIFIER ::= { traps 21 }
|
|
aisToPdhAlarmOff OBJECT IDENTIFIER ::= { traps 22 }
|
|
lossAtLineAlarmOn OBJECT IDENTIFIER ::= { traps 23 }
|
|
lossAtLineAlarmOff OBJECT IDENTIFIER ::= { traps 24 }
|
|
lossAtPdhAlarmOn OBJECT IDENTIFIER ::= { traps 25 }
|
|
lossAtPdhAlarmOff OBJECT IDENTIFIER ::= { traps 26 }
|
|
lossAtFrameAlarmOn OBJECT IDENTIFIER ::= { traps 27 }
|
|
lossAtFrameAlarmOff OBJECT IDENTIFIER ::= { traps 28 }
|
|
|
|
trapParam OBJECT IDENTIFIER ::= { alNMS 1 }
|
|
|
|
nmsTrapTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Time of alarms scan."
|
|
::= { trapParam 1 }
|
|
|
|
trapSequence OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of trap sequence."
|
|
::= { trapParam 2 }
|
|
|
|
mwRouteID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Identification of microwave route."
|
|
::= { trapParam 3 }
|
|
|
|
stationID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Identification of Radio Relay Link station."
|
|
::= { trapParam 4 }
|
|
|
|
stationName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Name of Radio Relay Link station."
|
|
::= { trapParam 5 }
|
|
|
|
mgmtGWaddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IP address of Management Gateway."
|
|
::= { trapParam 6 }
|
|
|
|
lineID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line ID number."
|
|
::= { trapParam 7 }
|
|
|
|
-- MIB pro spoje rady MPx
|
|
|
|
alMPStatusLED OBJECT IDENTIFIER ::= { alMP 1 }
|
|
|
|
alMPEHW OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hardware error."
|
|
::= { alMPStatusLED 1 }
|
|
|
|
alMPESR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error in radio."
|
|
::= { alMPStatusLED 2 }
|
|
|
|
alMPESL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error on lines."
|
|
::= { alMPStatusLED 3 }
|
|
|
|
alMPCA OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Non-standard command activate."
|
|
::= { alMPStatusLED 4 }
|
|
|
|
alMPGeneral OBJECT IDENTIFIER ::= { alMP 2 }
|
|
|
|
alMPSupervisor OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),none(0),terminal(1),local(2),network(3),service(4),alcoma(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Active supervisor."
|
|
::= { alMPGeneral 1 }
|
|
|
|
alMPConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),undefined(0),cf2xE1(1),cf4xE1(2),cf1xE2(3),cf1xE1-Ethernet(4),cf1xE3-E1(7),cf1xEthernet(8),
|
|
cf1xEthF-E1(9),
|
|
cf1xEthF-E1-1xE1(10),cf1xEthF-E1-2xE1(11),cf1xEthF-E1-3xE1(12),cf1xEthF-E1-4xE1(13),
|
|
cf1xEthF-E1-5xE1(14),cf1xEthF-E1-6xE1(15),cf1xEthF-E1-7xE1(16),cf1xEthF-E1-8xE1(17),
|
|
cf1xEthF(18),
|
|
cf1xEthF-1xE1(19),cf1xEthF-2xE1(20),cf1xEthF-3xE1(21),cf1xEthF-4xE1(22),
|
|
cf1xEthF-5xE1(23),cf1xEthF-6xE1(24),cf1xEthF-7xE1(25),cf1xEthF-8xE1(26),
|
|
cf2xFEth(27),cf2xFEth-1xE1(28),
|
|
cf4xFEth-2xE1(29),
|
|
cf2xGEth(30),cf2xGEth-SFP100(31),cf2xGEth-SFP1000(32),cf2xGEth-SFPSG(33) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IDU configuration."
|
|
::= { alMPGeneral 2 }
|
|
|
|
alMPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(0),ok(1),warning(2),error(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Station alarm status."
|
|
::= { alMPGeneral 3 }
|
|
|
|
alMPHistory OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "History alarm status."
|
|
::= { alMPGeneral 4 }
|
|
|
|
alMPIAISL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Automatic AIS ignored."
|
|
::= { alMPGeneral 5 }
|
|
|
|
alMPILEVPWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low RX or TX level alarms ignored."
|
|
::= { alMPGeneral 6 }
|
|
|
|
alMPExpiration OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Expiration status."
|
|
::= { alMPGeneral 7 }
|
|
|
|
alMPDevType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Device type."
|
|
::= { alMPGeneral 8 }
|
|
|
|
alMPModel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Terminal model."
|
|
::= { alMPGeneral 9 }
|
|
|
|
alMPVersionSW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Firmware version."
|
|
::= { alMPGeneral 10 }
|
|
|
|
alMPODU OBJECT IDENTIFIER ::= { alMP 3 }
|
|
|
|
alMPTuneTX OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter frequency [MHz]."
|
|
::= { alMPODU 1 }
|
|
|
|
alMPTuneRX OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Receiver frequency [MHz]."
|
|
::= { alMPODU 2 }
|
|
|
|
alMPTX-PWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-128) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter power level [dB]."
|
|
::= { alMPODU 3 }
|
|
|
|
alMPRX-Level OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-128) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal receiver level [dB]."
|
|
::= { alMPODU 4 }
|
|
|
|
alMPTX-PWRAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm transmitter power level."
|
|
::= { alMPODU 5 }
|
|
|
|
alMPRX-LevelAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm signal receiver level."
|
|
::= { alMPODU 6 }
|
|
|
|
alMPMode-TX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),manual(1),atpc(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Mode of power control."
|
|
::= { alMPODU 7 }
|
|
|
|
alMPODU-LB OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU line-loopback."
|
|
::= { alMPODU 8 }
|
|
|
|
alMPTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Temperature ODU."
|
|
::= { alMPODU 9 }
|
|
|
|
alMPVerSwMW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "MW Circuits version."
|
|
::= { alMPODU 10 }
|
|
|
|
alMPSerNumMW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "MW Serial Number."
|
|
::= { alMPODU 11 }
|
|
|
|
alMPTypeODU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),oduA(0),oduB(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Type of ODU."
|
|
::= { alMPODU 12 }
|
|
|
|
alMPPTX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Set power of transmitter."
|
|
::= { alMPODU 13 }
|
|
|
|
alMPModem OBJECT IDENTIFIER ::= { alMP 4 }
|
|
|
|
alMPQuality OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Quality of signal."
|
|
::= { alMPModem 1 }
|
|
|
|
alMPSNR OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal noise ratio."
|
|
::= { alMPModem 2 }
|
|
|
|
alMPQualityAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm quality of signal."
|
|
::= { alMPModem 3 }
|
|
|
|
alMPSNRAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm signal noise ratio."
|
|
::= { alMPModem 4 }
|
|
|
|
alMPRate OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),r300Mbps(1),r200Mbps(2),r16Mbps1(3),r282Mbps(4),r40Mbps1(5),r20Mbps1(6),r10Mbps1(7),r5Mbps1(8),r179Mbps(9),r230Mbps(10),
|
|
r14Mbps(11),r32Mbps2(12),r44Mbps(13),r22Mbps(14),r11Mbps(15),r5Mbps(16),r66Mbps(17),r33Mbps(18),
|
|
r16Mbps(19),r8Mbps(20),r80Mbps(21),r333Mbps(22),r355Mbps(23),r384Mbps(24),r50Mbps(25),r72Mbps(26),
|
|
r100Mbps(27),r123Mbps(28),r158Mbps(29),r168Mbps(30),r77Mbps(31),r35Mbps(32),r25Mbps(33),r165Mbps(34),
|
|
r61Mbps(35),r39Mbps(36),r19Mbps(37),r17Mbps(38),r30Mbps(39),r34Mbps(40),r60Mbps(41),r178Mbps(42),
|
|
r186Mbps(43),r1250Mbps(44),r70Mbps(45),r58Mbps(46),r116Mbps(47),r149Mbps(48),r183Mbps(49),
|
|
r216Mbps(50),r249Mbps(51),r31Mbps(52),r41Mbps(53),r59Mbps(54),r64Mbps(55),r69Mbps(56),
|
|
r83Mbps(57),r102Mbps(58),r119Mbps(59),r127Mbps(60),r137Mbps(61),r89Mbps(62) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmision rate of link."
|
|
::= { alMPModem 5 }
|
|
|
|
alMPQAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),mp4FSK(1),mpQPSK(2),mp4QAM1(3),mp8QAM(4),mp16QAM1(5),mp4QAM2(6),mp16QAM2(7),mp32QAM(8),mp64QAM(9),mp128QAM(10),mp256QAM(11) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low transnission rate of link."
|
|
::= { alMPModem 6 }
|
|
|
|
alMPActiveACM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Activation ACM."
|
|
::= { alMPModem 7 }
|
|
|
|
alMPStatusACM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),normal(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Actual ACM status."
|
|
::= { alMPModem 8 }
|
|
|
|
alMPBW OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),
|
|
bw3-5MHz(1),bw5MHz(2),bw7MHz(3),bw7-5MHz(4),bw10MHz(5),bw13-75MHz(6),bw14MHz(7),bw20MHz(8),bw20MHzETSI(9),bw27-5MHz(10),
|
|
bw28MHz(11),bw28MHzACAP(12),bw30MHz(13),bw40MHz(14),bw50MHz(15),bw55MHz(16),bw56MHz(17),bw56ACAPMHz(18),bw80MHz(19),bw110MHz(20),
|
|
bw112MHz(21) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Actual bandwidth."
|
|
::= { alMPModem 9 }
|
|
|
|
alMPMaxRate OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),r300Mbps(1),r200Mbps(2),r16Mbps1(3),r282Mbps(4),r40Mbps1(5),r20Mbps1(6),r10Mbps1(7),r5Mbps1(8),r179Mbps(9),r230Mbps(10),
|
|
r14Mbps(11),r32Mbps2(12),r44Mbps(13),r22Mbps(14),r11Mbps(15),r5Mbps(16),r66Mbps(17),r33Mbps(18),
|
|
r16Mbps(19),r8Mbps(20),r80Mbps(21),r333Mbps(22),r355Mbps(23),r384Mbps(24),r50Mbps(25),r72Mbps(26),
|
|
r100Mbps(27),r123Mbps(28),r158Mbps(29),r168Mbps(30),r77Mbps(31),r35Mbps(32),r25Mbps(33),r165Mbps(34),
|
|
r61Mbps(35),r39Mbps(36),r19Mbps(37),r17Mbps(38),r30Mbps(39),r34Mbps(40),r60Mbps(41),r178Mbps(42),
|
|
r186Mbps(43),r1250Mbps(44),r70Mbps(45),r58Mbps(46),r116Mbps(47),r149Mbps(48),r183Mbps(49),
|
|
r216Mbps(50),r249Mbps(51),r31Mbps(52),r41Mbps(53),r59Mbps(54),r64Mbps(55),r69Mbps(56),
|
|
r83Mbps(57),r102Mbps(58),r119Mbps(59),r127Mbps(60),r137Mbps(61),r89Mbps(62) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximal Transmision rate of link."
|
|
::= { alMPModem 10 }
|
|
|
|
alMPSupply OBJECT IDENTIFIER ::= { alMP 5 }
|
|
|
|
alMPInput OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input voltage low."
|
|
::= { alMPSupply 1 }
|
|
|
|
alMPRDG OBJECT IDENTIFIER ::= { alMP 6 }
|
|
|
|
alMPEEPROM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "EEPROM memory status."
|
|
::= { alMPRDG 1 }
|
|
|
|
alMPRAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM memory status."
|
|
::= { alMPRDG 2 }
|
|
|
|
alMPCommRMT OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with remote station."
|
|
::= { alMPRDG 3 }
|
|
|
|
alMPMUX OBJECT IDENTIFIER ::= { alMP 7 }
|
|
|
|
alMPBER OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Value of BER."
|
|
::= { alMPMUX 1 }
|
|
|
|
alMPBER-10E6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-6."
|
|
::= { alMPMUX 2 }
|
|
|
|
alMPBER-10E4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-4."
|
|
::= { alMPMUX 3 }
|
|
|
|
alMPFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Frame LOSS."
|
|
::= { alMPMUX 4 }
|
|
|
|
alMPLine1 OBJECT IDENTIFIER ::= { alMP 8 }
|
|
|
|
alMPLOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 1."
|
|
::= { alMPLine1 1 }
|
|
|
|
alMPILOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 1."
|
|
::= { alMPLine1 2 }
|
|
|
|
alMPAIS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 1."
|
|
::= { alMPLine1 3 }
|
|
|
|
alMPAISL1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 1."
|
|
::= { alMPLine1 4 }
|
|
|
|
alMPLLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 1."
|
|
::= { alMPLine1 5 }
|
|
|
|
alMPRLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 1."
|
|
::= { alMPLine1 6 }
|
|
|
|
alMPLine2 OBJECT IDENTIFIER ::= { alMP 9 }
|
|
|
|
alMPLOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 2."
|
|
::= { alMPLine2 1 }
|
|
|
|
alMPILOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 2."
|
|
::= { alMPLine2 2 }
|
|
|
|
alMPLink2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),down(0),up(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Link status line 2."
|
|
::= { alMPLine2 3 }
|
|
|
|
alMPSpeed2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),e10Mbps(0),e100Mbps(1),e1000Mbps(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Speed of line 2."
|
|
::= { alMPLine2 4 }
|
|
|
|
alMPType2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),halfduplex(0),fullduplex(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication type of line 2."
|
|
::= { alMPLine2 5 }
|
|
|
|
alMPFlow2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flow control of line 2."
|
|
::= { alMPLine2 6 }
|
|
|
|
alMPPktRX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received packets count of line 2."
|
|
::= { alMPLine2 7 }
|
|
|
|
alMPByteRX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received bytes count of line 2."
|
|
::= { alMPLine2 8 }
|
|
|
|
alMPPktTX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted packets count of line 2."
|
|
::= { alMPLine2 9 }
|
|
|
|
alMPByteTX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted bytes count of line 2."
|
|
::= { alMPLine2 10 }
|
|
|
|
alMPError2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Error count of line 2."
|
|
::= { alMPLine2 11 }
|
|
|
|
alMPCollision2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Collision count of line 2."
|
|
::= { alMPLine2 12 }
|
|
|
|
alMPPauseIn2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Pause count of line 2."
|
|
::= { alMPLine2 13 }
|
|
|
|
alMPPauseOut2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Pause count of line 2."
|
|
::= { alMPLine2 14 }
|
|
|
|
alMPDiscardsIn2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Discards pactets count of line 2."
|
|
::= { alMPLine2 15 }
|
|
|
|
alMPLine3 OBJECT IDENTIFIER ::= { alMP 10 }
|
|
|
|
alMPLOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 3."
|
|
::= { alMPLine3 1 }
|
|
|
|
alMPILOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 3."
|
|
::= { alMPLine3 2 }
|
|
|
|
alMPLink3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),down(0),up(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Link status line 3."
|
|
::= { alMPLine3 3 }
|
|
|
|
alMPSpeed3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),e10Mbps(0),e100Mbps(1),e1000Mbps(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Speed of line 3."
|
|
::= { alMPLine3 4 }
|
|
|
|
alMPType3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),halfduplex(0),fullduplex(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication type of line 3."
|
|
::= { alMPLine3 5 }
|
|
|
|
alMPFlow3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flow control of line 3."
|
|
::= { alMPLine3 6 }
|
|
|
|
alMPPktRX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received packets count of line 3."
|
|
::= { alMPLine3 7 }
|
|
|
|
alMPByteRX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received bytes count of line 3."
|
|
::= { alMPLine3 8 }
|
|
|
|
alMPPktTX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted packets count of line 3."
|
|
::= { alMPLine3 9 }
|
|
|
|
alMPByteTX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted bytes count of line 3."
|
|
::= { alMPLine3 10 }
|
|
|
|
alMPError3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Error count of line 3."
|
|
::= { alMPLine3 11 }
|
|
|
|
alMPCollision3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Collision count of line 3."
|
|
::= { alMPLine3 12 }
|
|
|
|
alMPPauseIn3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Pause count of line 3."
|
|
::= { alMPLine3 13 }
|
|
|
|
alMPPauseOut3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Pause count of line 3."
|
|
::= { alMPLine3 14 }
|
|
|
|
alMPDiscardsIn3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Discards pactets count of line 3."
|
|
::= { alMPLine3 15 }
|
|
|
|
alMPLine4 OBJECT IDENTIFIER ::= { alMP 11 }
|
|
|
|
alMPLOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 4."
|
|
::= { alMPLine4 1 }
|
|
|
|
alMPILOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 4."
|
|
::= { alMPLine4 2 }
|
|
|
|
alMPLink4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),down(0),up(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Link status line 4."
|
|
::= { alMPLine4 3 }
|
|
|
|
alMPSpeed4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),e10Mbps(0),e100Mbps(1),e1000Mbps(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Speed of line 4."
|
|
::= { alMPLine4 4 }
|
|
|
|
alMPType4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),halfduplex(0),fullduplex(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication type of line 4."
|
|
::= { alMPLine4 5 }
|
|
|
|
alMPFlow4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flow control of line 4."
|
|
::= { alMPLine4 6 }
|
|
|
|
alMPPktRX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received packets count of line 4."
|
|
::= { alMPLine4 7 }
|
|
|
|
alMPByteRX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received bytes count of line 4."
|
|
::= { alMPLine4 8 }
|
|
|
|
alMPPktTX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted packets count of line 4."
|
|
::= { alMPLine4 9 }
|
|
|
|
alMPByteTX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted bytes count of line 4."
|
|
::= { alMPLine4 10 }
|
|
|
|
alMPError4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Error count of line 4."
|
|
::= { alMPLine4 11 }
|
|
|
|
alMPCollision4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Collision count of line 4."
|
|
::= { alMPLine4 12 }
|
|
|
|
alMPPauseIn4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Pause count of line 4."
|
|
::= { alMPLine4 13 }
|
|
|
|
alMPPauseOut4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Pause count of line 4."
|
|
::= { alMPLine4 14 }
|
|
|
|
alMPDiscardsIn4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Discards pactets count of line 4."
|
|
::= { alMPLine4 15 }
|
|
|
|
END
|