graham/towerops
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
towerops/priv/mibs/MPLS-TE-MIB
Graham McIntire b4f8b40b7f
Include MIB files in Docker image instead of using PVC 
- Remove PVC volume mount from k8s/deployment.yaml
- Delete k8s/mib-pvc.yaml (no longer needed)
- Update .gitignore to commit MIB files to git
- Add mix import_mibs task to copy MIBs from LibreNMS
- Add all MIB files from priv/mibs/ to git

This fixes the multi-attach volume error in Kubernetes where new pods
couldn't start because the RWO (ReadWriteOnce) PVC was attached to the
old pod. MIBs are now part of the Docker image and can be used by all
pods simultaneously.
2026-01-19 14:01:03 -06:00

1587 lines
54 KiB
Text
Raw Permalink Blame History

-- Extracted from draft-ietf-mpls-te-mib-04.txt
--
-- MPLS Traffic Engineering Management Information Base Using
-- SMIv2
--
-- draft-ietf-mpls-te-mib-04.txt
MPLS-TE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress,
experimental, Integer32, Unsigned32
-- experimental, Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus, RowPointer,
StorageType, DisplayString
-- StorageType, DisplayString, Unsigned32
FROM SNMPv2-TC
InterfaceIndexOrZero
FROM IF-MIB
-- MplsBitRate, MplsBurstSize, MplsLSPID
-- FROM MPLS-LSR-MIB
InetAddressIPv4, InetAddressIPv6
FROM INET-ADDRESS-MIB;
mplsTeMIB MODULE-IDENTITY
LAST-UPDATED
"200007141200Z" -- 14 July 2000 12:00:00 EST
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
" Cheenu Srinivasan
Postal: Tachion Networks, Inc.
Monmouth Park Corporate Center I
Building C, 185 Monmouth Park Highway
West Long Branch, NJ 07764
Tel: +1-732-542-7750 x1234
Email: cheenu@tachion.com
Arun Viswanathan
Postal: Force10 Networks, Inc.
1440 McCarthy Blvd
Milpitas, CA 95035
Tel: +1-408-571-3516
Email: arun@force10networks.com
Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01824
Tel: +1-978-244-3051
Email: tnadeau@cisco.com"
DESCRIPTION
"This MIB module contains managed object definitions
for MPLS Traffic Engineering (TE) as defined in:
Extensions to RSVP for LSP Tunnels, Awduche et al,
Internet Draft <draft-mpls-rsvp-lsp-tunnel-02.txt>,
March 1999; Constraint-Based LSP Setup using LDP, B.
Jamoussi, Internet Draft <draft-ietf-mpls-cr-ldp-
01.txt>, Feb. 1999; Requirements for Traffic
Engineering Over MPLS, Awduche, D., J. Malcolm, J.,
Agogbua, J., O'Dell, M., J. McManus, <rfc2702.txt>,
September 1999."
-- Revision history.
REVISION
"200007141200Z" -- 14 July 2000 12:00:00 EST
DESCRIPTION
"Updates based on MPLS WG feedback"
REVISION
"200005261200Z" -- 26 May 2000 12:00:00 EST
DESCRIPTION
"Updates based on MPLS WG feedback"
REVISION
"200003031200Z" -- 3 March 2000 12:00:00 EST
DESCRIPTION
"Updates based on MPLS WG feedback"
REVISION
"199907161200Z" -- 16 July 1999 12:00:00 EST
DESCRIPTION
"Initial draft version."
::= { experimental 95 }
-- Textual Conventions.
-- NOTE: These TC's are defined here for now instead of importing from
-- the MPLS-LSR-MIB
MplsLSPID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An identifier that is assigned to each LSP and is
used to uniquely identify it. This is assigned at
the head end of the LSP and can be used by all LSRs
to identify this LSP. This value is piggybacked by
the signaling protocol when this LSP is signaled
within the network. This identifier can then be
used at each LSR to identify which labels are being
swapped to other labels for this LSP. For IPv4
addresses this results in a 6-octet long cookie."
SYNTAX OCTET STRING (SIZE (0..31))
MplsBitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An estimate of bandwidth in units of 1,000 bits per
second. If this object reports a value of 'n' then
the rate of the object is somewhere in the range of
'n-500' to 'n+499'. For objects which do not vary in
bitrate, or for those where no accurate estimation
can be made, this object should contain the nominal
bitrate."
SYNTAX Integer32 (1..2147483647)
MplsBurstSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The number of octets of MPLS data that the stream
may send back-to-back without concern for policing."
SYNTAX Integer32 (1..2147483647)
-- the actual TC's for the MPLS-TE-MIB start here
MplsTunnelIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Index into mplsTunnelTable."
SYNTAX Integer32 (0..65535)
-- Top level components of this MIB.
-- tables, scalars
mplsTeObjects OBJECT IDENTIFIER ::= { mplsTeMIB 1 }
-- traps
mplsTeNotifications OBJECT IDENTIFIER ::= { mplsTeMIB 2 }
mplsTeNotifyPrefix OBJECT IDENTIFIER ::= { mplsTeNotifications 0 }
-- conformance
mplsTeConformance OBJECT IDENTIFIER ::= { mplsTeMIB 3 }
-- MPLS tunnel table.
mplsTunnelIndexNext OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for mplsTunnelIndex when creating entries in
mplsTunnelTable. If the number of unassigned entries
is exhausted, a retrival operation will return a
value of 0. This object may also return a value of
0 when the LSR is unable to accept conceptual row
creation, for example, if the mplsTunnelTable is
implemented as read-only. To obtain the value of
mplsTunnelIndex for a new entry, the manager must
first issue a management protocol retrieval
operation to obtain the current value of this
object. The agent should modify the value to reflect
the next unassigned index after each retrieval
operation. After a manager retrieves a value the
agent will determine through its local policy when
this index value will be made available for reuse."
::= { mplsTeObjects 1 }
mplsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point tunnel segments are
supported, although multi-point-to-point and point-
to-multi-point connections are supported by an LSR
acting as a cross-connect. Each MPLS tunnel can
thus have one out-segment originating at this LSR
and/or one in-segment terminating at this LSR."
::= { mplsTeObjects 2 }
mplsTunnelEntry OBJECT-TYPE
SYNTAX MplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents an MPLS tunnel.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signaling protocol. Whenever a new entry is created
with mplsTunnelIsIf set to true(1), then a
corresponding entry is created in ifTable as well
(see RFC 2233). The ifType of this entry is
mplsTunnel(150)."
REFERENCE
"1. RFC 2233 - The Interfaces Group MIB using SMIv2,
McCloghrie, K., and F. Kastenholtz, Nov. 1997
2. RFC 1700 - Assigned Numbers, Reynolds, J. and J.
Postel, Oct. 1994"
INDEX { mplsTunnelIndex, mplsTunnelInstance,
mplsTunnelIngressLSRId }
::= { mplsTunnelTable 1 }
MplsTunnelEntry ::= SEQUENCE {
mplsTunnelIndex MplsTunnelIndex,
mplsTunnelInstance MplsTunnelIndex,
mplsTunnelIngressLSRId Unsigned32,
mplsTunnelName DisplayString,
mplsTunnelDescr DisplayString,
mplsTunnelIsIf TruthValue,
mplsTunnelIfIndex InterfaceIndexOrZero,
mplsTunnelXCPointer RowPointer,
mplsTunnelSignallingProto INTEGER,
mplsTunnelSetupPrio INTEGER,
mplsTunnelHoldingPrio INTEGER,
mplsTunnelSessionAttributes BITS,
mplsTunnelOwner INTEGER,
mplsTunnelLocalProtectInUse TruthValue,
mplsTunnelResourcePointer RowPointer,
mplsTunnelInstancePriority Integer32,
mplsTunnelHopTableIndex Integer32,
mplsTunnelARHopTableIndex Integer32,
mplsTunnelAdminStatus INTEGER,
mplsTunnelOperStatus INTEGER,
mplsTunnelRowStatus RowStatus,
mplsTunnelStorageType StorageType
}
mplsTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Uniquely identifies this row."
::= { mplsTunnelEntry 1 }
mplsTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Uniquely identifies an instance of a tunnel. It is
useful to identify multiple instances of tunnels for
the purposes of backup and parallel tunnels."
::= { mplsTunnelEntry 2 }
mplsTunnelIngressLSRId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The purpose of this object is to uniquely identity a
tunnel within a network. When the MPLS signalling
protoocol is rsvp(2) this value should mimic the
Extended Tunnel Id field in the Session object. When
the MPLS signalling protoocol is crldp(3) this value
should mimic the Ingress LSR Router ID field in the
LSPID TLV object."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, Internet Draft <draft-mpls-rsvp-lsp-
tunnel-05.txt>, February 2000.,
2. Constraint-Based LSP Setup using LDP, Jamoussi,
Internet Draft <draft-ietf-mpls-cr-ldp-03.txt>,
September 1999."
::= { mplsTunnelEntry 3 }
mplsTunnelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The canonical name assigned to the tunnel. This name
can be used to refer to the tunnel on the LSR's
console port. If mplsTunnelIsIf is set to true then
the ifName of the interface corresponding to this
tunnel should have a value equal to mplsTunnelName.
Also see the description of ifName in RFC 2233."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2,
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
::= { mplsTunnelEntry 4 }
mplsTunnelDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing information about the
tunnel. If there is no description this object
contains a zero length string."
::= { mplsTunnelEntry 5 }
mplsTunnelIsIf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes whether or not this tunnel corresponds to an
interface represented in the interfaces group table.
Note that if this variable is set to true then the
ifName of the interface corresponding to this tunnel
should have a value equal to mplsTunnelName. Also
see the description of ifName in RFC 2233."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2,
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
DEFVAL { false }
::= { mplsTunnelEntry 6 }
mplsTunnelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise this
variable should contain the value of zero indicating
that a valid ifIndex was not assigned to this tunnel
interface."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2,
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
::= { mplsTunnelEntry 7 }
mplsTunnelXCPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable points to a row in the mplsXCTable.
This table identifies the segments that compose this
tunnel, their characteristics, and relationships to
each other. A value of zeroDotZero indicates that no
LSP has been associated with this tunnel yet."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base
Using SMIv2, Internet Draft <draft-ietf-mpls-lsr-mib-
04.txt>, April 26, 2000."
::= { mplsTunnelEntry 8 }
mplsTunnelSignallingProto OBJECT-TYPE
SYNTAX INTEGER {
none(1),
rsvp(2),
crldp(3),
other(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The signaling protocol, if any, which was used to
setup this tunnel."
DEFVAL { none }
::= { mplsTunnelEntry 9 }
mplsTunnelSetupPrio OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the setup priority of this tunnel."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, Internet Draft <draft-mpls-rsvp-lsp-
tunnel-05.txt>, February 2000.,
2. Constraint-Based LSP Setup using LDP, Jamoussi,
Internet Draft <draft-ietf-mpls-cr-ldp-03.txt>,
September 1999."
::= { mplsTunnelEntry 10 }
mplsTunnelHoldingPrio OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the holding priority for this tunnel."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, Internet Draft <draft-mpls-rsvp-lsp-
tunnel-05.txt>, February 2000.,
2. Constraint-Based LSP Setup using LDP, Jamoussi,
Internet Draft <draft-ietf-mpls-cr-ldp-03.txt>,
September 1999."
::= { mplsTunnelEntry 11 }
mplsTunnelSessionAttributes OBJECT-TYPE
SYNTAX BITS {
fastReroute (0),
mergingPermitted (1),
isPersistent (2),
localProtectionAvailable (3),
isPinned (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This bitmask indicates optional session values for
this tunnel. The following describes these
bitfields:
fastReroute This flag indicates that the
any tunnel hop may choose to
reroute this tunnel without
tearing it down.
mergingPermitted This flag permits transit
routers to merge this session
with other RSVP sessions for
the purpose of reducing
resource overhead on
downstream transit routers,
thereby providing better
network scalability.
isPersistant Indicates whether this tunnel
should be restored
automatically after a failure
occurs.
localProtectionAvailable This flag permits transit
routers to use a local repair
mechanism which may result in
violation of the explicit
routing of this tunnel. When a
fault is detected on an
adjacent downstream link or
node, a transit router can
reroute traffic for fast
service restoration.
isPinned This flag indicates whether
the loose-routed hops of this
tunnel are to be pinned."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, Internet Draft <draft-mpls-rsvp-lsp-
tunnel-05.txt>, February 2000."
DEFVAL { { } }
::= { mplsTunnelEntry 12 }
mplsTunnelOwner OBJECT-TYPE
SYNTAX INTEGER {
admin(1), -- represents all management entities
rsvp(2),
crldp(3),
policyAgent(4),
other(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates which protocol created and is responsible
for managing this tunnel. Values rsvp(2) and
crldp(3) should not be used at the head-end of a
MPLS tunnel."
::= { mplsTunnelEntry 13 }
mplsTunnelLocalProtectInUse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the local repair mechanism is in use
to maintain this tunnel (usually in the face of an
outage of the link it was previously routed over)."
::= { mplsTunnelEntry 14 }
mplsTunnelResourcePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable represents a pointer to the traffic
parameter specification for this tunnel. This value
may point at an entry in the mplsTunnelResourceEntry
to indicate which mplsTunnelResourceEntry is to be
assigned to this segment. This value may optionally
point at an externally defined traffic parameter
specification table. A value of zeroDotZero
indicates best-effort treatment. By having the same
value of this object, two or more segments can
indicate resource sharing."
::= { mplsTunnelEntry 15 }
mplsTunnelInstancePriority OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates which priority, in descending
order with 0 indicating the lowest priority, within
a group of tunnel instances. A group of tunnel
instances is defined as a set of tunnels with the
same mplsTunnelIndex in this table, but with a
different mplsTunnelInstance. Tunnel group
priorities are used to denote the priority at which
a particular tunnel instance will supercede another.
Instances of tunnels containing the same
mplsTunnelInstancePriority will be used for load
sharing."
DEFVAL { 0 }
::= { mplsTunnelEntry 16 }
mplsTunnelHopTableIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index into the mplsTunnelHopTable entry that
specifies the explicit route hops for this tunnel."
::= { mplsTunnelEntry 17 }
mplsTunnelARHopTableIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into the mplsTunnelARHopTable entry that
specifies the actual hops traversed by the tunnel."
::= { mplsTunnelEntry 18 }
mplsTunnelAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the desired operational status of this
tunnel."
::= { mplsTunnelEntry 19 }
mplsTunnelOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status cannot be determined
dormant(5),
notPresent(6), -- some component is missing
lowerLayerDown(7) -- down due to the state of
-- lower layer interfaces
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual operational status of this
tunnel, which is typically but not limited to, a
function of the state of individual segments of this
tunnel."
::= { mplsTunnelEntry 20 }
mplsTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelEntry 21 }
mplsTunnelStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelEntry 22 }
-- End of mplsTunnelTable
-- Maximum number of tunnel hops supported.
mplsTunnelMaxHops OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of hops that can be specified for
a tunnel on this device."
::= { mplsTeObjects 3 }
-- Tunnel hop table.
mplsTunnelHopIndexNext OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for mplsTunnelHopListIndex when creating entries in
the mplsTunnelHopTable. If the number of unassigned
entries is exhausted, a retrival operation will
return a value of 0. This object may also return a
value of 0 when the LSR is unable to accept
conceptual row creation, for example, if the
mplsTunnelHopTable is implemented as read-only. To
obtain the value of mplsTunnelHopListIndex for a new
entry in the mplsTunnelHopTable, the manager issues
a management protocol retrieval operation to obtain
the current value of mplsTunnelHopIndex. After each
retrieval operation, the agent should modify the
value to reflect the next unassigned index. After a
manager retrieves a value the agent will determine
through its local policy when this index value will
be made available for reuse."
::= { mplsTeObjects 4 }
mplsTunnelHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelHopTable is used to indicate the hops,
strict or loose, for an MPLS tunnel defined in
mplsTunnelTable, when it is established via
signaling, for the outgoing direction of the tunnel.
Each row in this table is indexed primarily by the
same index, mplsTunnelIndex, as the row of the
corresponding tunnel in mplsTunnelTable. Each row
also has a secondary index mplsTunnelHopIndex
corresponding to the next hop that this row
corresponds to. The first row in the table is the
first hop after the origination point of the tunnel.
In case we want to specify a particular interface on
the originating LSR of an outgoing tunnel by which
we want packets to exit the LSR, we specify this as
the first hop for this tunnel in
mplsTunnelHopTable."
::= { mplsTeObjects 5 }
mplsTunnelHopEntry OBJECT-TYPE
SYNTAX MplsTunnelHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signaled ERLSP set up by an MPLS signaling
protocol."
INDEX { mplsTunnelHopListIndex, mplsTunnelHopIndex }
::= { mplsTunnelHopTable 1 }
MplsTunnelHopEntry ::= SEQUENCE {
mplsTunnelHopListIndex Integer32,
mplsTunnelHopIndex Integer32,
mplsTunnelHopAddrType INTEGER,
-- mplsTunnelHopIpv4Addr InetAddressIPv4,
mplsTunnelHopIpv4Addr IpAddress,
mplsTunnelHopIpv4PrefixLen INTEGER,
mplsTunnelHopIpv6Addr InetAddressIPv6,
mplsTunnelHopIpv6PrefixLen INTEGER,
mplsTunnelHopAsNumber INTEGER,
mplsTunnelHopLspId MplsLSPID,
mplsTunnelHopStrictOrLoose INTEGER,
mplsTunnelHopRowStatus RowStatus,
mplsTunnelHopStorageType StorageType
}
mplsTunnelHopListIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index into this table identifying a
particular explicit route object."
::= { mplsTunnelHopEntry 1 }
mplsTunnelHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying a
particular hop."
::= { mplsTunnelHopEntry 2 }
mplsTunnelHopAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipV4(1),
ipV6(2),
asNumber(3),
lspid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the address type of this tunnel hop."
DEFVAL { ipV4 }
::= { mplsTunnelHopEntry 3 }
mplsTunnelHopIpv4Addr OBJECT-TYPE
-- SYNTAX InetAddressIPv4
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to ipV4(1), then
this value will contain the IPv4 address of this
hop. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelHopEntry 4 }
mplsTunnelHopIpv4PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is ipV4(1), then the prefix
length for this hop's IPv4 address is contained
herein. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelHopEntry 5 }
mplsTunnelHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the mplsTunnelHopAddrType is set to ipV6(2), then
this variable contains the IPv6 address of this hop.
This object is otherwise insignificant and should
contain a value of 0."
::= { mplsTunnelHopEntry 6 }
mplsTunnelHopIpv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to ipV6(2), this
value will contain the prefix length for this hop's
IPv6 address. This object is otherwise insignificant
and should contain a value of 0."
::= { mplsTunnelHopEntry 7 }
mplsTunnelHopAsNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to asNumber(3), then
this value will contain the AS number of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
::= { mplsTunnelHopEntry 8 }
mplsTunnelHopLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to lspid(4), then
this value will contain the LSPID of a tunnel of
this hop. The present tuunel being configured is
'tunneled' through this hop (using label stacking).
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
::= { mplsTunnelHopEntry 9 }
mplsTunnelHopStrictOrLoose OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
loose(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes whether this tunnel hop is routed in a
strict or loose fashion."
::= { mplsTunnelHopEntry 10 }
mplsTunnelHopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelHopEntry 11 }
mplsTunnelHopStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelHopEntry 12 }
-- End of mplsTunnelHopTable
-- Begin of mplsTunnelResourceTable
mplsTunnelResourceIndexNext OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR is
unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first issue
a management protocol retrieval operation to obtain
the current value of this object. The agent should
modify the value to reflect the next unassigned
index after each retrieval operation. After a
manager retrieves a value the agent will determine
through its local policy when this index value will
be made available for reuse."
::= { mplsTeObjects 6 }
mplsTunnelResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelResourceTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels to
point to a single entry in this table, implying that
these tunnels should share resources."
::= { mplsTeObjects 7 }
mplsTunnelResourceEntry OBJECT-TYPE
SYNTAX MplsTunnelResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a set of resources
for an MPLS tunnel. An entry can be created by a
network administrator or by an SNMP agent as
instructed by any MPLS signaling protocol."
INDEX { mplsTunnelResourceIndex }
::= { mplsTunnelResourceTable 1 }
MplsTunnelResourceEntry ::= SEQUENCE {
mplsTunnelResourceIndex Integer32,
mplsTunnelResourceMaxRate MplsBitRate,
mplsTunnelResourceMeanRate MplsBitRate,
mplsTunnelResourceMaxBurstSize MplsBurstSize,
mplsTunnelResourceRowStatus RowStatus,
mplsTunnelResourceStorageType StorageType
}
mplsTunnelResourceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies this row."
::= { mplsTunnelResourceEntry 1 }
mplsTunnelResourceMaxRate OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum rate in bits/second. Note that setting
mplsTunnelResourceMaxRate,
mplsTunnelResourceMeanRate, and
mplsTunnelResourceMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance of
mplsTSpecMaxRate in mplsTSpecTable the index of
which is copied into the corresponding
mplsInSegmentTSpecIndex."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base
Using SMIv2, Internet Draft <draft-ietf-mpls-lsr-mib-
04.txt>, April 26, 2000."
::= { mplsTunnelResourceEntry 2 }
mplsTunnelResourceMeanRate OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is copied into an instance of
mplsTSpecMeanRate in the mplsTSpecTable. The index
of this table is then copied into the corresponding
mplsInSegmentTSpecIndex.
When resource allocation is performed as requested
by this TSpec object, it is copied into an entry in
mplsTSpecTable [LSRMIB]: mplsTunnelInMeanRate to
mplsTSpecMeanRate. The mplsTSpecDirection of this
entry is set to 'in'(1). The mplsTSpecIndex value
of this entry is copied to mplsInSegmentTSpecIndex
of the corresponding in-segment entry."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base
Using SMIv2, Internet Draft <draft-ietf-mpls-lsr-mib-
04.txt>, April 26, 2000."
::= { mplsTunnelResourceEntry 3 }
mplsTunnelResourceMaxBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum burst size in bytes. This object is
copied to mplsInSegmentMaxBurstSize of the
corresponding in-segment.
When resource allocation is performed as requested
by this TSpec object, it is copied into an entry in
mplsTSpecTable [LSRMIB]: mplsTunnelInMaxBurstSize to
mplsTSpecMaxBurstSize. The mplsTSpecDirection of
this entry is set to 'in'(1). The mplsTSpecIndex
value of this entry is copied to
mplsInSegmentTSpecIndex of the corresponding in-
segment entry."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base
Using SMIv2, Internet Draft <draft-ietf-mpls-lsr-mib-
04.txt>, April 26, 2000."
::= { mplsTunnelResourceEntry 4 }
mplsTunnelResourceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelResourceEntry 5 }
mplsTunnelResourceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelResourceEntry 6 }
-- End mplsTunnelResourceTable
-- Tunnel Actual Route Hop table.
mplsTunnelARHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelARHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined in
mplsTunnelTable, as reported by the MPLS signaling
protocol, for the outgoing direction of the tunnel.
Each row in this table is indexed primarily by the
same indices, mplsTunnelIndex and
mplsTunnelInstance, as the row of the corresponding
tunnel in mplsTunnelTable. Each row also has a
third index mplsTunnelARHopIndex, corresponding to
the next hop that this row corresponds to. The
first row in the table is the first hop after the
origination point of the tunnel. In case we want to
specify a particular interface on the originating
LSR of an outgoing tunnel by which we want packets
to exit the LSR, we specify this as the first hop
for this tunnel in mplsTunnelARHopTable.
Please note that since the information necessary to
build entries within this table are not provided by
some MPLS signaling protocols, implementation of
this table is optional. Furthermore, since the
information in this table is actually provided by
the MPLS signaling protocol after the path has been
set-up, the entries in this table are provided only
for observation, and hence, all variables in this
table are accessible exclusively as read-only."
::= { mplsTeObjects 8 }
mplsTunnelARHopEntry OBJECT-TYPE
SYNTAX MplsTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signaled ERLSP set up by an MPLS signaling
protocol."
INDEX { mplsTunnelARHopListIndex, mplsTunnelARHopIndex }
::= { mplsTunnelARHopTable 1 }
MplsTunnelARHopEntry ::= SEQUENCE {
mplsTunnelARHopListIndex Integer32,
mplsTunnelARHopIndex Integer32,
mplsTunnelARHopAddrType INTEGER,
-- mplsTunnelARHopIpv4Addr InetAddressIPv4,
mplsTunnelARHopIpv4Addr IpAddress,
mplsTunnelARHopIpv4PrefixLen INTEGER,
mplsTunnelARHopIpv6Addr InetAddressIPv6,
mplsTunnelARHopIpv6PrefixLen INTEGER,
mplsTunnelARHopAsNumber INTEGER,
mplsTunnelARHopStrictOrLoose INTEGER
}
mplsTunnelARHopListIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index into this table identifying a
particular recorded hop list."
::= { mplsTunnelARHopEntry 1 }
mplsTunnelARHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying the
particular hop."
::= { mplsTunnelARHopEntry 2 }
mplsTunnelARHopAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipV4(1),
ipV6(2),
asNumber(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the address type of this tunnel hop."
DEFVAL { ipV4 }
::= { mplsTunnelARHopEntry 3 }
mplsTunnelARHopIpv4Addr OBJECT-TYPE
-- SYNTAX InetAddressIPv4
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to ipV4(1), then
this value will contain the IPv4 address of this
hop. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelARHopEntry 4 }
mplsTunnelARHopIpv4PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is ipV4(1), then the
prefix length for this hop's IPv4 address is
contained herein. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelARHopEntry 5 }
mplsTunnelARHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the mplsTunnelARHopAddrType is set to ipV6(2),
then this variable contains the IPv6 address of this
hop. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelARHopEntry 6 }
mplsTunnelARHopIpv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to ipV6(2), this
value will contain the prefix length for this hop's
IPv6 address. This object is otherwise insignificant
and should contain a value of 0."
::= { mplsTunnelARHopEntry 7 }
mplsTunnelARHopAsNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to asNumber(3),
then this value will contain the AS number of this
hop. This object is otherwise insignificant and
should contain a value of 0 to indicate this fact."
::= { mplsTunnelARHopEntry 8 }
mplsTunnelARHopStrictOrLoose OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
loose(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes whether this is tunnel hop is routed in a
strict or loose fashion."
::= { mplsTunnelARHopEntry 9 }
-- End of mplsTunnelARHopTable
mplsTunnelTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown traps,
otherwise these traps are not emitted."
DEFVAL { false }
::= { mplsTeObjects 9 }
-- Notifications.
mplsTunnelUp NOTIFICATION-TYPE
OBJECTS { mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a
mplsTunnelOperStatus object for one of the
configured tunnels is about to leave the down state
and transition into some other state (but not into
the notPresent state). This other state is
indicated by the included value of
mplsTunnelOperStatus."
::= { mplsTeNotifyPrefix 1 }
mplsTunnelDown NOTIFICATION-TYPE
OBJECTS { mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a
mplsTunnelOperStatus object for one of the
configured tunnels is about to enter the down state
from some other state (but not from the notPresent
state). This other state is indicated by the
included value of mplsTunnelOperStatus."
::= { mplsTeNotifyPrefix 2 }
mplsTunnelRerouted NOTIFICATION-TYPE
OBJECTS { mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a tunnel is
rerouted or re-optimized. If the Actual Path is
used, then this object MAY contain the new path for
this tunnel some time after this trap is issued by
the agent."
::= { mplsTeNotifyPrefix 3 }
mplsTunnelReoptimized NOTIFICATION-TYPE
OBJECTS {
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a tunnel is
reoptimized. If the actual path is used, then this
object MAY contain the new path for this tunnel
some time after this trap is issued by the agent."
::= { mplsTeNotifyPrefix 4 }
-- End of notifications.
-- Module compliance.
mplsTeGroups
OBJECT IDENTIFIER ::= { mplsTeConformance 1 }
mplsTeCompliances
OBJECT IDENTIFIER ::= { mplsTeConformance 2 }
mplsTeModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support the
MPLS TE MIB."
MODULE -- this module
-- The mandatory group has to be implemented by all
-- LSRs that originate/terminate ESLSPs/tunnels.
-- In addition, depending on the type of tunnels
-- supported, other groups become mandatory as
-- explained below.
MANDATORY-GROUPS { mplsTunnelGroup }
GROUP mplsTunnelManualGroup
DESCRIPTION
"This group is mandatory for devices which support
manual configuration of tunnels, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelSignallingProto should be at least read-
only with a value of none(1)."
GROUP mplsTunnelSignaledGroup
DESCRIPTION
"This group is mandatory for devices which support
signaled tunnel set up, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelSignallingProto should be at least read-
only returning a value of ldp(2), or rsvp(3)."
GROUP mplsTunnelIsNotIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are not interfaces, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelIsIf must at least be read-only
returning false(1)."
GROUP mplsTunnelIsIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are interfaces, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelIsIf must at least be read-only
returning true(2)."
GROUP mplsTunnelOptionalGroup
DESCRIPTION
"Objects in this group are optional."
-- mplsTunnelTable
OBJECT mplsTunnelName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelIsIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelIfIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelXCPointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSignallingProto
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSetupPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHoldingPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSessionAttributes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelOwner
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelLocalProtectInUse
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourcePointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelInstancePriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopTableIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelARHopTableIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelAdminStatus
SYNTAX INTEGER { up (1), down (2) }
MIN-ACCESS read-only
DESCRIPTION
"Only up and down states must be supported. Write
access is not required."
OBJECT mplsTunnelOperStatus
SYNTAX INTEGER { up (1), down (2) }
DESCRIPTION
"Only up and down states must be supported. Write
access is not required."
OBJECT mplsTunnelRowStatus
SYNTAX INTEGER { active(1), notInService(2),
createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
-- mplsTunnelHopTable
OBJECT mplsTunnelHopAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv4Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv4PrefixLen
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv6Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv6PrefixLen
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopAsNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopLspId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopStrictOrLoose
SYNTAX INTEGER { strict(1) }
MIN-ACCESS read-only
DESCRIPTION
"loose(2) need not be supported. Write access is
not required."
OBJECT mplsTunnelHopRowStatus
SYNTAX INTEGER { active(1), notInService(2),
createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelHopStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
-- mplsTunnelResourceTable
OBJECT mplsTunnelResourceMaxRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMeanRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMaxBurstSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceRowStatus
SYNTAX INTEGER { active(1), notInService(2),
createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelResourceStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
::= { mplsTeCompliances 1 }
-- Units of conformance.
mplsTunnelGroup OBJECT-GROUP
OBJECTS { mplsTunnelIndexNext,
mplsTunnelName,
mplsTunnelDescr,
mplsTunnelOwner,
mplsTunnelXCPointer,
mplsTunnelIfIndex,
mplsTunnelHopTableIndex,
mplsTunnelARHopTableIndex,
mplsTunnelAdminStatus,
mplsTunnelOperStatus,
mplsTunnelRowStatus,
mplsTunnelTrapEnable,
mplsTunnelStorageType,
mplsTunnelMaxHops,
mplsTunnelResourcePointer,
mplsTunnelInstancePriority
}
STATUS current
DESCRIPTION
"Necessary, but not sufficient, set of objects to
implement tunnels. In addition, depending on the
type of the tunnels supported (for example, manually
configured or signaled, persistent or non-
persistent, etc.), the following other groups
defined below are mandatory: mplsTunnelManualGroup
and/or mplsTunnelSignaledGroup,
mplsTunnelIsNotIntfcGroup and/or
mplsTunnelIsIntfcGroup."
::= { mplsTeGroups 1 }
mplsTunnelManualGroup OBJECT-GROUP
OBJECTS { mplsTunnelSignallingProto }
STATUS current
DESCRIPTION
"Object(s) needed to implement manually configured
tunnels."
::= { mplsTeGroups 2 }
mplsTunnelSignaledGroup OBJECT-GROUP
OBJECTS { mplsTunnelSetupPrio,
mplsTunnelHoldingPrio,
mplsTunnelSignallingProto,
mplsTunnelLocalProtectInUse,
mplsTunnelSessionAttributes,
mplsTunnelHopIndexNext,
mplsTunnelHopAddrType,
mplsTunnelHopIpv4Addr,
mplsTunnelHopIpv4PrefixLen,
mplsTunnelHopIpv6Addr,
mplsTunnelHopIpv6PrefixLen,
mplsTunnelHopAsNumber,
mplsTunnelHopLspId,
mplsTunnelHopStrictOrLoose,
mplsTunnelHopRowStatus,
mplsTunnelHopStorageType
}
STATUS current
DESCRIPTION
"Object needed to implement signaled tunnels."
::= { mplsTeGroups 3 }
mplsTunnelIsIntfcGroup OBJECT-GROUP
OBJECTS { mplsTunnelIsIf }
STATUS current
DESCRIPTION
"Objects needed to implement tunnels that are
interfaces."
::= { mplsTeGroups 4 }
mplsTunnelIsNotIntfcGroup OBJECT-GROUP
OBJECTS { mplsTunnelIsIf }
STATUS current
DESCRIPTION
"Objects needed to implement tunnels that are not
interfaces."
::= { mplsTeGroups 5 }
mplsTunnelOptionalGroup OBJECT-GROUP
OBJECTS { mplsTunnelResourceIndexNext,
mplsTunnelResourceMaxRate,
mplsTunnelResourceMeanRate,
mplsTunnelResourceMaxBurstSize,
mplsTunnelResourceRowStatus,
mplsTunnelResourceStorageType,
mplsTunnelARHopAddrType,
mplsTunnelARHopIpv4Addr,
mplsTunnelARHopIpv4PrefixLen,
mplsTunnelARHopIpv6Addr,
mplsTunnelARHopIpv6PrefixLen,
mplsTunnelARHopAsNumber,
mplsTunnelARHopStrictOrLoose
}
STATUS current
DESCRIPTION
"The objects in this group are optional."
::= { mplsTeGroups 6 }
mplsTeNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { mplsTunnelUp,
mplsTunnelDown,
mplsTunnelRerouted
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this module.
None is mandatory."
::= { mplsTeGroups 7 }
-- End of MPLS-TE-MIB
END
Reference in a new issue View git blame Copy permalink