Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
1837 lines
69 KiB
Text
1837 lines
69 KiB
Text
MAU-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter32, Integer32, Counter64,
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, mib-2
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
TruthValue, AutonomousType, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
InterfaceIndex
|
|
FROM IF-MIB -- RFC 2863
|
|
IANAifMauTypeListBits, IANAifMauMediaAvailable,
|
|
IANAifMauAutoNegCapBits, IANAifJackType
|
|
FROM IANA-MAU-MIB
|
|
-- http://www.iana.org/assignments/ianamau-mib
|
|
;
|
|
|
|
mauMod MODULE-IDENTITY
|
|
LAST-UPDATED "200704210000Z" -- April 21, 2007
|
|
ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG charter:
|
|
http://www.ietf.org/html.charters/hubmib-charter.html
|
|
|
|
Mailing Lists:
|
|
General Discussion: hubmib@ietf.org
|
|
To Subscribe: hubmib-request@ietf.org
|
|
In Body: subscribe your_email_address
|
|
|
|
|
|
|
|
Chair: Bert Wijnen
|
|
Postal: Alcatel-Lucent
|
|
Schagen 33
|
|
3461 GL Linschoten
|
|
Netherlands
|
|
Phone: +31-348-407-775
|
|
EMail: bwijnen@alcatel-lucent.com
|
|
|
|
Editor: Edward Beili
|
|
Postal: Actelis Networks Inc.
|
|
25 Bazel St., P.O.B. 10173
|
|
Petach-Tikva 10173
|
|
Israel
|
|
Tel: +972-3-924-3491
|
|
EMail: edward.beili@actelis.com"
|
|
|
|
DESCRIPTION
|
|
"Management information for 802.3 MAUs.
|
|
|
|
The following reference is used throughout this MIB module:
|
|
|
|
[IEEE802.3] refers to:
|
|
IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information
|
|
technology - Telecommunications and information exchange
|
|
between systems - Local and metropolitan area networks -
|
|
Specific requirements - Part 3: Carrier sense multiple
|
|
access with collision detection (CSMA/CD) access method and
|
|
physical layer specifications'.
|
|
|
|
Of particular interest is Clause 30, 'Management'.
|
|
|
|
Copyright (C) The IETF Trust (2007).
|
|
This version of this MIB module is part of RFC 4836;
|
|
see the RFC itself for full legal notices."
|
|
|
|
REVISION "200704210000Z" -- April 21, 2007
|
|
DESCRIPTION "Updated to reference IANA maintaned textual
|
|
conventions for MAU types, Media Availability state,
|
|
Auto Negotiation capabilities, and jack types,
|
|
instead of using internally defined values.
|
|
|
|
This version is published as RFC 4836."
|
|
|
|
REVISION "200309190000Z" -- September 19, 2003
|
|
DESCRIPTION "Updated to include support for 10 Gb/s MAUs.
|
|
This resulted in the following revisions:
|
|
- Added OBJECT-IDENTITY definitions for
|
|
10 gigabit MAU types
|
|
|
|
|
|
|
|
- Added fiberLC jack type to JackType TC
|
|
- Extended ifMauTypeListBits with bits for
|
|
the 10 gigabit MAU types
|
|
- Added enumerations to ifMauMediaAvailable,
|
|
and updated its DESCRIPTION to reflect
|
|
behaviour at 10 Gb/s
|
|
- Added 64-bit version of ifMauFalseCarriers
|
|
and added mauIfGrpHCStats object group to
|
|
contain the new object
|
|
- Deprecated mauModIfCompl2 and replaced it
|
|
with mauModIfCompl3, which includes the new
|
|
object group
|
|
|
|
This version published as RFC 3636."
|
|
|
|
REVISION "199908240400Z" -- August 24, 1999
|
|
DESCRIPTION "This version published as RFC 2668. Updated
|
|
to include support for 1000 Mb/sec
|
|
MAUs and flow control negotiation."
|
|
|
|
REVISION "199710310000Z" -- October 31, 1997
|
|
DESCRIPTION "Version published as RFC 2239."
|
|
|
|
REVISION "199309300000Z" -- September 30, 1993
|
|
DESCRIPTION "Initial version, published as RFC 1515."
|
|
|
|
::= { snmpDot3MauMgt 6 }
|
|
|
|
snmpDot3MauMgt OBJECT IDENTIFIER ::= { mib-2 26 }
|
|
|
|
-- Textual Conventions
|
|
|
|
JackType ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS TC IS DEPRECATED **********
|
|
|
|
This TC has been deprecated in favour of
|
|
IANAifJackType.
|
|
|
|
Common enumeration values for repeater
|
|
and interface MAU jack types."
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
rj45(2),
|
|
rj45S(3), -- rj45 shielded
|
|
db9(4),
|
|
bnc(5),
|
|
fAUI(6), -- female aui
|
|
|
|
|
|
|
|
mAUI(7), -- male aui
|
|
fiberSC(8),
|
|
fiberMIC(9),
|
|
fiberST(10),
|
|
telco(11),
|
|
mtrj(12), -- fiber MT-RJ
|
|
hssdc(13), -- fiber channel style-2
|
|
fiberLC(14)
|
|
}
|
|
|
|
dot3RpMauBasicGroup
|
|
OBJECT IDENTIFIER ::= { snmpDot3MauMgt 1 }
|
|
dot3IfMauBasicGroup
|
|
OBJECT IDENTIFIER ::= { snmpDot3MauMgt 2 }
|
|
dot3BroadMauBasicGroup
|
|
OBJECT IDENTIFIER ::= { snmpDot3MauMgt 3 }
|
|
|
|
-- OIDs under the following branch are reserved for
|
|
-- the IANA-MAU-MIB to assign as MAU type values:
|
|
-- { snmpDot3MauMgt 4 }
|
|
|
|
dot3IfMauAutoNegGroup
|
|
OBJECT IDENTIFIER ::= { snmpDot3MauMgt 5 }
|
|
|
|
-- the following OID is the MODULE-IDENTITY value
|
|
-- for this MIB module: { snmpDot3MauMgt 6 }
|
|
|
|
--
|
|
-- The Basic Repeater MAU Table
|
|
--
|
|
|
|
rpMauTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RpMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and status information
|
|
about the MAU(s) attached to the ports of a
|
|
repeater."
|
|
::= { dot3RpMauBasicGroup 1 }
|
|
|
|
rpMauEntry OBJECT-TYPE
|
|
SYNTAX RpMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about a single MAU."
|
|
INDEX { rpMauGroupIndex,
|
|
rpMauPortIndex,
|
|
|
|
|
|
|
|
rpMauIndex
|
|
}
|
|
::= { rpMauTable 1 }
|
|
|
|
RpMauEntry ::=
|
|
SEQUENCE {
|
|
rpMauGroupIndex Integer32,
|
|
rpMauPortIndex Integer32,
|
|
rpMauIndex Integer32,
|
|
rpMauType AutonomousType,
|
|
rpMauStatus INTEGER,
|
|
rpMauMediaAvailable IANAifMauMediaAvailable,
|
|
rpMauMediaAvailableStateExits Counter32,
|
|
rpMauJabberState INTEGER,
|
|
rpMauJabberingStateEnters Counter32,
|
|
rpMauFalseCarriers Counter32
|
|
}
|
|
|
|
rpMauGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the group
|
|
containing the port to which the MAU described
|
|
by this entry is connected.
|
|
|
|
Note: In practice, a group will generally be
|
|
a field-replaceable unit (i.e., module, card,
|
|
or board) that can fit in the physical system
|
|
enclosure, and the group number will correspond
|
|
to a number marked on the physical enclosure.
|
|
|
|
The group denoted by a particular value of this
|
|
object is the same as the group denoted by the
|
|
same value of rptrGroupIndex."
|
|
REFERENCE "RFC 2108, rptrGroupIndex."
|
|
::= { rpMauEntry 1 }
|
|
|
|
rpMauPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the repeater
|
|
port within group rpMauGroupIndex to which the
|
|
MAU described by this entry is connected."
|
|
REFERENCE "RFC 2108, rptrPortIndex."
|
|
|
|
|
|
|
|
::= { rpMauEntry 2 }
|
|
|
|
rpMauIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the MAU
|
|
described by this entry from among other
|
|
MAUs connected to the same port
|
|
(rpMauPortIndex)."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.1, aMAUID."
|
|
::= { rpMauEntry 3 }
|
|
|
|
rpMauType OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the MAU type. Values for
|
|
standard IEEE 802.3 MAU types are defined in the
|
|
IANA maintained IANA-MAU-MIB module, as
|
|
OBJECT-IDENTITIES of dot3MauType.
|
|
If the MAU type is unknown, the object identifier
|
|
zeroDotZero is returned."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.2, aMAUType."
|
|
::= { rpMauEntry 4 }
|
|
|
|
rpMauStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
unknown(2),
|
|
operational(3),
|
|
standby(4),
|
|
shutdown(5),
|
|
reset(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The current state of the MAU. This object MAY
|
|
be implemented as a read-only object by those
|
|
agents and MAUs that do not implement software
|
|
control of the MAU state. Some agents may not
|
|
support setting the value of this object to some
|
|
of the enumerated values.
|
|
|
|
The value other(1) is returned if the MAU is in
|
|
a state other than one of the states 2 through
|
|
6.
|
|
|
|
|
|
|
|
The value unknown(2) is returned when the MAU's
|
|
true state is unknown; for example, when it is
|
|
being initialized.
|
|
|
|
A MAU in the operational(3) state is fully
|
|
functional; it operates, and passes signals to its
|
|
attached DTE or repeater port in accordance to
|
|
its specification.
|
|
|
|
A MAU in standby(4) state forces DI and CI to
|
|
idle, and the media transmitter to idle or fault,
|
|
if supported. Standby(4) mode only applies to
|
|
link type MAUs. The state of
|
|
rpMauMediaAvailable is unaffected.
|
|
|
|
A MAU in shutdown(5) state assumes the same
|
|
condition on DI, CI, and the media transmitter,
|
|
as though it were powered down or not connected.
|
|
The MAU MAY return other(1) value for the
|
|
rpMauJabberState and rpMauMediaAvailable objects
|
|
when it is in this state. For an AUI, this
|
|
state will remove power from the AUI.
|
|
|
|
Setting this variable to the value reset(6)
|
|
resets the MAU in the same manner as a
|
|
power-off, power-on cycle of at least one-half
|
|
second would. The agent is not required to
|
|
return the value reset(6).
|
|
|
|
Setting this variable to the value
|
|
operational(3), standby(4), or shutdown(5)
|
|
causes the MAU to assume the respective state,
|
|
except that setting a mixing-type MAU or an AUI
|
|
to standby(4) will cause the MAU to enter the
|
|
shutdown state."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,
|
|
30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,
|
|
acResetMAU."
|
|
::= { rpMauEntry 5 }
|
|
|
|
rpMauMediaAvailable OBJECT-TYPE
|
|
SYNTAX IANAifMauMediaAvailable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies Media Available state of
|
|
the MAU, complementary to the rpMauStatus. Values
|
|
for the standard IEEE 802.3 Media Available states
|
|
are defined in the IANA maintained IANA-MAU-MIB
|
|
|
|
|
|
|
|
module, as IANAifMauMediaAvailable TC."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."
|
|
::= { rpMauEntry 6 }
|
|
|
|
rpMauMediaAvailableStateExits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of times that
|
|
rpMauMediaAvailable for this MAU instance leaves
|
|
the state available(3).
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of rptrMonitorPortLastChange."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.
|
|
RFC 2108, rptrMonitorPortLastChange"
|
|
::= { rpMauEntry 7 }
|
|
|
|
rpMauJabberState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
unknown(2),
|
|
noJabber(3),
|
|
jabbering(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value other(1) is returned if the jabber
|
|
state is not 2, 3, or 4. The agent MUST always
|
|
return other(1) for MAU type dot3MauTypeAUI.
|
|
|
|
The value unknown(2) is returned when the MAU's
|
|
true state is unknown; for example, when it is
|
|
being initialized.
|
|
|
|
If the MAU is not jabbering the agent returns
|
|
noJabber(3). This is the 'normal' state.
|
|
|
|
If the MAU is in jabber state the agent returns
|
|
the jabbering(4) value."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."
|
|
::= { rpMauEntry 8 }
|
|
|
|
rpMauJabberingStateEnters OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of times that
|
|
mauJabberState for this MAU instance enters the
|
|
state jabbering(4). For MAUs of type
|
|
dot3MauTypeAUI, dot3MauType100BaseT4,
|
|
dot3MauType100BaseTX, dot3MauType100BaseFX, and
|
|
all 1000Mbps types, this counter will always
|
|
indicate zero.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of rptrMonitorPortLastChange."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.
|
|
RFC 2108, rptrMonitorPortLastChange"
|
|
::= { rpMauEntry 9 }
|
|
|
|
rpMauFalseCarriers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of false carrier events
|
|
during IDLE in 100BASE-X links. This counter
|
|
does not increment at the symbol rate. It can
|
|
increment after a valid carrier completion at a
|
|
maximum rate of once per 100 ms until the next
|
|
carrier event.
|
|
|
|
This counter increments only for MAUs of type
|
|
dot3MauType100BaseT4, dot3MauType100BaseTX,
|
|
dot3MauType100BaseFX, and all 1000Mbps types.
|
|
|
|
For all other MAU types, this counter will
|
|
always indicate zero.
|
|
|
|
The approximate minimum time for rollover of
|
|
this counter is 7.4 hours.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of rptrMonitorPortLastChange."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.
|
|
RFC 2108, rptrMonitorPortLastChange"
|
|
::= { rpMauEntry 10 }
|
|
|
|
-- The rpJackTable applies to MAUs attached to repeaters
|
|
-- which have one or more external jacks (connectors).
|
|
|
|
|
|
|
|
rpJackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RpJackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about the external jacks attached
|
|
to MAUs attached to the ports of a repeater."
|
|
::= { dot3RpMauBasicGroup 2 }
|
|
|
|
rpJackEntry OBJECT-TYPE
|
|
SYNTAX RpJackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about a particular jack."
|
|
INDEX { rpMauGroupIndex,
|
|
rpMauPortIndex,
|
|
rpMauIndex,
|
|
rpJackIndex
|
|
}
|
|
::= { rpJackTable 1 }
|
|
|
|
RpJackEntry ::=
|
|
SEQUENCE {
|
|
rpJackIndex Integer32,
|
|
rpJackType IANAifJackType
|
|
}
|
|
|
|
rpJackIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the jack
|
|
described by this entry from among other jacks
|
|
attached to the same MAU (rpMauIndex)."
|
|
::= { rpJackEntry 1 }
|
|
|
|
rpJackType OBJECT-TYPE
|
|
SYNTAX IANAifJackType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The jack connector type, as it appears on the
|
|
outside of the system."
|
|
::= { rpJackEntry 2 }
|
|
|
|
--
|
|
-- The Basic Interface MAU Table
|
|
--
|
|
|
|
|
|
|
|
|
|
ifMauTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and status information
|
|
about MAU(s) attached to an interface."
|
|
::= { dot3IfMauBasicGroup 1 }
|
|
|
|
ifMauEntry OBJECT-TYPE
|
|
SYNTAX IfMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about a single MAU."
|
|
INDEX { ifMauIfIndex,
|
|
ifMauIndex
|
|
}
|
|
::= { ifMauTable 1 }
|
|
|
|
IfMauEntry ::=
|
|
SEQUENCE {
|
|
ifMauIfIndex InterfaceIndex,
|
|
ifMauIndex Integer32,
|
|
ifMauType AutonomousType,
|
|
ifMauStatus INTEGER,
|
|
ifMauMediaAvailable IANAifMauMediaAvailable,
|
|
ifMauMediaAvailableStateExits Counter32,
|
|
ifMauJabberState INTEGER,
|
|
ifMauJabberingStateEnters Counter32,
|
|
ifMauFalseCarriers Counter32,
|
|
ifMauTypeList Integer32,
|
|
ifMauDefaultType AutonomousType,
|
|
ifMauAutoNegSupported TruthValue,
|
|
ifMauTypeListBits IANAifMauTypeListBits,
|
|
ifMauHCFalseCarriers Counter64
|
|
}
|
|
|
|
ifMauIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the interface
|
|
to which the MAU described by this entry is
|
|
connected."
|
|
REFERENCE "RFC 2863, ifIndex"
|
|
::= { ifMauEntry 1 }
|
|
|
|
|
|
|
|
|
|
ifMauIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the MAU
|
|
described by this entry from among other MAUs
|
|
connected to the same interface (ifMauIfIndex)."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.1, aMAUID."
|
|
::= { ifMauEntry 2 }
|
|
|
|
ifMauType OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the MAU type. Values for
|
|
standard IEEE 802.3 MAU types are defined in the
|
|
IANA maintained IANA-MAU-MIB module, as
|
|
OBJECT-IDENTITIES of dot3MauType.
|
|
If the MAU type is unknown, the object identifier
|
|
zeroDotZero is returned.
|
|
|
|
This object represents the operational type of
|
|
the MAU, as determined by either 1) the result
|
|
of the auto-negotiation function or 2) if
|
|
auto-negotiation is not enabled or is not
|
|
implemented for this MAU, by the value of the
|
|
object ifMauDefaultType. In case 2), a set to
|
|
the object ifMauDefaultType will force the MAU
|
|
into the new operating mode."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.2, aMAUType."
|
|
::= { ifMauEntry 3 }
|
|
|
|
ifMauStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
unknown(2),
|
|
operational(3),
|
|
standby(4),
|
|
shutdown(5),
|
|
reset(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The current state of the MAU. This object MAY
|
|
be implemented as a read-only object by those
|
|
agents and MAUs that do not implement software
|
|
control of the MAU state. Some agents may not
|
|
|
|
|
|
|
|
support setting the value of this object to some
|
|
of the enumerated values.
|
|
|
|
The value other(1) is returned if the MAU is in
|
|
a state other than one of the states 2 through
|
|
6.
|
|
|
|
The value unknown(2) is returned when the MAU's
|
|
true state is unknown; for example, when it is
|
|
being initialized.
|
|
|
|
A MAU in the operational(3) state is fully
|
|
functional; it operates, and passes signals to its
|
|
attached DTE or repeater port in accordance to
|
|
its specification.
|
|
|
|
A MAU in standby(4) state forces DI and CI to
|
|
idle and the media transmitter to idle or fault,
|
|
if supported. Standby(4) mode only applies to
|
|
link type MAUs. The state of
|
|
ifMauMediaAvailable is unaffected.
|
|
|
|
A MAU in shutdown(5) state assumes the same
|
|
condition on DI, CI, and the media transmitter,
|
|
as though it were powered down or not connected.
|
|
The MAU MAY return other(1) value for the
|
|
ifMauJabberState and ifMauMediaAvailable objects
|
|
when it is in this state. For an AUI, this
|
|
state will remove power from the AUI.
|
|
|
|
Setting this variable to the value reset(6)
|
|
resets the MAU in the same manner as a
|
|
power-off, power-on cycle of at least one-half
|
|
second would. The agent is not required to
|
|
return the value reset(6).
|
|
|
|
Setting this variable to the value
|
|
operational(3), standby(4), or shutdown(5)
|
|
causes the MAU to assume the respective state,
|
|
except that setting a mixing-type MAU or an AUI
|
|
to standby(4) will cause the MAU to enter the
|
|
shutdown state."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,
|
|
30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,
|
|
acResetMAU."
|
|
::= { ifMauEntry 4 }
|
|
|
|
ifMauMediaAvailable OBJECT-TYPE
|
|
|
|
|
|
|
|
SYNTAX IANAifMauMediaAvailable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies Media Available state of
|
|
the MAU, complementary to the ifMauStatus. Values
|
|
for the standard IEEE 802.3 Media Available states
|
|
are defined in the IANA maintained IANA-MAU-MIB
|
|
module, as IANAifMauMediaAvailable TC."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."
|
|
::= { ifMauEntry 5 }
|
|
|
|
ifMauMediaAvailableStateExits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of times that
|
|
ifMauMediaAvailable for this MAU instance leaves
|
|
the state available(3).
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of ifCounterDiscontinuityTime."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.
|
|
RFC 2863, ifCounterDiscontinuityTime."
|
|
::= { ifMauEntry 6 }
|
|
|
|
ifMauJabberState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
unknown(2),
|
|
noJabber(3),
|
|
jabbering(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value other(1) is returned if the jabber
|
|
state is not 2, 3, or 4. The agent MUST always
|
|
return other(1) for MAU type dot3MauTypeAUI.
|
|
|
|
The value unknown(2) is returned when the MAU's
|
|
true state is unknown; for example, when it is
|
|
being initialized.
|
|
|
|
If the MAU is not jabbering the agent returns
|
|
noJabber(3). This is the 'normal' state.
|
|
|
|
If the MAU is in jabber state the agent returns
|
|
|
|
|
|
|
|
the jabbering(4) value."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."
|
|
::= { ifMauEntry 7 }
|
|
|
|
ifMauJabberingStateEnters OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of times that
|
|
mauJabberState for this MAU instance enters the
|
|
state jabbering(4). This counter will always
|
|
indicate zero for MAUs of type dot3MauTypeAUI
|
|
and those of speeds above 10Mbps.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of ifCounterDiscontinuityTime."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.
|
|
RFC 2863, ifCounterDiscontinuityTime."
|
|
::= { ifMauEntry 8 }
|
|
|
|
ifMauFalseCarriers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of false carrier events
|
|
during IDLE in 100BASE-X and 1000BASE-X links.
|
|
|
|
For all other MAU types, this counter will
|
|
always indicate zero. This counter does not
|
|
increment at the symbol rate.
|
|
|
|
It can increment after a valid carrier
|
|
completion at a maximum rate of once per 100 ms
|
|
for 100BASE-X and once per 10us for 1000BASE-X
|
|
until the next CarrierEvent.
|
|
|
|
This counter can roll over very quickly. A
|
|
management station is advised to poll the
|
|
ifMauHCFalseCarriers instead of this counter in
|
|
order to avoid loss of information.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of ifCounterDiscontinuityTime."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.
|
|
|
|
|
|
|
|
RFC 2863, ifCounterDiscontinuityTime."
|
|
::= { ifMauEntry 9 }
|
|
|
|
ifMauTypeList OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This object has been deprecated in favour of
|
|
ifMauTypeListBits.
|
|
|
|
A value that uniquely identifies the set of
|
|
possible IEEE 802.3 types that the MAU could be.
|
|
The value is a sum that initially takes the
|
|
value zero. Then, for each type capability of
|
|
this MAU, 2 raised to the power noted below is
|
|
added to the sum. For example, a MAU that has
|
|
the capability to be only 10BASE-T would have a
|
|
value of 512 (2**9). In contrast, a MAU that
|
|
supports both 10Base-T (full duplex) and
|
|
100BASE-TX (full duplex) would have a value of
|
|
((2**11) + (2**16)), or 67584.
|
|
|
|
The powers of 2 assigned to the capabilities are
|
|
these:
|
|
|
|
Power Capability
|
|
0 other or unknown
|
|
1 AUI
|
|
2 10BASE-5
|
|
3 FOIRL
|
|
4 10BASE-2
|
|
5 10BASE-T duplex mode unknown
|
|
6 10BASE-FP
|
|
7 10BASE-FB
|
|
8 10BASE-FL duplex mode unknown
|
|
9 10BROAD36
|
|
10 10BASE-T half duplex mode
|
|
11 10BASE-T full duplex mode
|
|
12 10BASE-FL half duplex mode
|
|
13 10BASE-FL full duplex mode
|
|
14 100BASE-T4
|
|
15 100BASE-TX half duplex mode
|
|
16 100BASE-TX full duplex mode
|
|
17 100BASE-FX half duplex mode
|
|
18 100BASE-FX full duplex mode
|
|
19 100BASE-T2 half duplex mode
|
|
|
|
|
|
|
|
20 100BASE-T2 full duplex mode
|
|
|
|
If auto-negotiation is present on this MAU, this
|
|
object will map to ifMauAutoNegCapability."
|
|
::= { ifMauEntry 10 }
|
|
|
|
ifMauDefaultType OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the default
|
|
administrative baseband MAU type to be used in
|
|
conjunction with the operational MAU type
|
|
denoted by ifMauType.
|
|
|
|
The set of possible values for this object is
|
|
the same as the set defined for the ifMauType
|
|
object.
|
|
|
|
This object represents the
|
|
administratively-configured type of the MAU. If
|
|
auto-negotiation is not enabled or is not
|
|
implemented for this MAU, the value of this
|
|
object determines the operational type of the
|
|
MAU. In this case, a set to this object will
|
|
force the MAU into the specified operating mode.
|
|
|
|
If auto-negotiation is implemented and enabled
|
|
for this MAU, the operational type of the MAU
|
|
is determined by auto-negotiation, and the value
|
|
of this object denotes the type to which the MAU
|
|
will automatically revert if/when
|
|
auto-negotiation is later disabled.
|
|
|
|
NOTE TO IMPLEMENTORS: It may be necessary to
|
|
provide for underlying hardware implementations
|
|
which do not follow the exact behavior specified
|
|
above. In particular, when
|
|
ifMauAutoNegAdminStatus transitions from enabled
|
|
to disabled, the agent implementation MUST
|
|
ensure that the operational type of the MAU (as
|
|
reported by ifMauType) correctly transitions to
|
|
the value specified by this object, rather than
|
|
continuing to operate at the value earlier
|
|
determined by the auto-negotiation function."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.1, aMAUID, and 22.2.4.1.4."
|
|
::= { ifMauEntry 11 }
|
|
|
|
|
|
|
|
|
|
ifMauAutoNegSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object indicates whether or not
|
|
auto-negotiation is supported on this MAU."
|
|
::= { ifMauEntry 12 }
|
|
|
|
ifMauTypeListBits OBJECT-TYPE
|
|
SYNTAX IANAifMauTypeListBits
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the set of
|
|
possible IEEE 802.3 types that the MAU could be.
|
|
If auto-negotiation is present on this MAU, this
|
|
object will map to ifMauAutoNegCapabilityBits.
|
|
|
|
Note that this MAU may be capable of operating
|
|
as a MAU type that is beyond the scope of this
|
|
MIB. This is indicated by returning the
|
|
bit value bOther in addition to any bit values
|
|
for standard capabilities that are listed in the
|
|
IANAifMauTypeListBits TC."
|
|
::= { ifMauEntry 13 }
|
|
|
|
ifMauHCFalseCarriers OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of the number of false carrier events
|
|
during IDLE in 100BASE-X and 1000BASE-X links.
|
|
|
|
For all other MAU types, this counter will
|
|
always indicate zero. This counter does not
|
|
increment at the symbol rate.
|
|
|
|
This counter is a 64-bit version of
|
|
ifMauFalseCarriers. Since the 32-bit version of
|
|
this counter can roll over very quickly,
|
|
management stations are advised to poll the
|
|
64-bit version instead, in order to avoid loss
|
|
of information.
|
|
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system and at other times, as indicated by the
|
|
value of ifCounterDiscontinuityTime."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.
|
|
|
|
|
|
|
|
RFC 2863, ifCounterDiscontinuityTime."
|
|
::= { ifMauEntry 14 }
|
|
|
|
-- The ifJackTable applies to MAUs attached to interfaces
|
|
-- which have one or more external jacks (connectors).
|
|
|
|
ifJackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfJackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Information about the external jacks attached
|
|
to MAUs attached to an interface."
|
|
::= { dot3IfMauBasicGroup 2 }
|
|
|
|
ifJackEntry OBJECT-TYPE
|
|
SYNTAX IfJackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about a particular jack."
|
|
INDEX { ifMauIfIndex,
|
|
ifMauIndex,
|
|
ifJackIndex
|
|
}
|
|
::= { ifJackTable 1 }
|
|
|
|
IfJackEntry ::=
|
|
SEQUENCE {
|
|
ifJackIndex Integer32,
|
|
ifJackType IANAifJackType
|
|
}
|
|
|
|
ifJackIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This variable uniquely identifies the jack
|
|
described by this entry from among other jacks
|
|
attached to the same MAU."
|
|
::= { ifJackEntry 1 }
|
|
|
|
ifJackType OBJECT-TYPE
|
|
SYNTAX IANAifJackType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The jack connector type, as it appears on the
|
|
outside of the system."
|
|
::= { ifJackEntry 2 }
|
|
|
|
|
|
|
|
--
|
|
-- The MAU Auto-Negotiation Table
|
|
--
|
|
|
|
ifMauAutoNegTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfMauAutoNegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Configuration and status objects for the
|
|
auto-negotiation function of MAUs attached to
|
|
interfaces.
|
|
|
|
The ifMauAutoNegTable applies to systems in
|
|
which auto-negotiation is supported on one or
|
|
more MAUs attached to interfaces. Note that if
|
|
auto-negotiation is present and enabled, the
|
|
ifMauType object reflects the result of the
|
|
auto-negotiation function."
|
|
::= { dot3IfMauAutoNegGroup 1 }
|
|
|
|
ifMauAutoNegEntry OBJECT-TYPE
|
|
SYNTAX IfMauAutoNegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing configuration
|
|
and status information for the auto-negotiation
|
|
function of a particular MAU."
|
|
INDEX { ifMauIfIndex,
|
|
ifMauIndex
|
|
}
|
|
::= { ifMauAutoNegTable 1 }
|
|
|
|
IfMauAutoNegEntry ::=
|
|
SEQUENCE {
|
|
ifMauAutoNegAdminStatus INTEGER,
|
|
ifMauAutoNegRemoteSignaling INTEGER,
|
|
ifMauAutoNegConfig INTEGER,
|
|
ifMauAutoNegCapability Integer32,
|
|
ifMauAutoNegCapAdvertised Integer32,
|
|
ifMauAutoNegCapReceived Integer32,
|
|
ifMauAutoNegRestart INTEGER,
|
|
ifMauAutoNegCapabilityBits IANAifMauAutoNegCapBits,
|
|
ifMauAutoNegCapAdvertisedBits IANAifMauAutoNegCapBits,
|
|
ifMauAutoNegCapReceivedBits IANAifMauAutoNegCapBits,
|
|
ifMauAutoNegRemoteFaultAdvertised INTEGER,
|
|
ifMauAutoNegRemoteFaultReceived INTEGER
|
|
}
|
|
|
|
|
|
|
|
|
|
ifMauAutoNegAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting this object to enabled(1) will cause
|
|
the interface that has the auto-negotiation
|
|
signaling ability to be enabled.
|
|
|
|
If the value of this object is disabled(2) then
|
|
the interface will act as it would if it had no
|
|
auto-negotiation signaling. Under these
|
|
conditions, an IEEE 802.3 MAU will immediately
|
|
be forced to the state indicated by the value of
|
|
the object ifMauDefaultType.
|
|
|
|
NOTE TO IMPLEMENTORS: When
|
|
ifMauAutoNegAdminStatus transitions from enabled
|
|
to disabled, the agent implementation MUST
|
|
ensure that the operational type of the MAU (as
|
|
reported by ifMauType) correctly transitions to
|
|
the value specified by the ifMauDefaultType
|
|
object, rather than continuing to operate at the
|
|
value earlier determined by the auto-negotiation
|
|
function."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.2, aAutoNegAdminState,
|
|
and 30.6.1.2.2, acAutoNegAdminControl."
|
|
::= { ifMauAutoNegEntry 1 }
|
|
|
|
ifMauAutoNegRemoteSignaling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
detected(1),
|
|
notdetected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value indicating whether the remote end of
|
|
the link is using auto-negotiation signaling. It
|
|
takes the value detected(1) if and only if,
|
|
during the previous link negotiation, FLP Bursts
|
|
were received."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.3,
|
|
aAutoNegRemoteSignaling."
|
|
::= { ifMauAutoNegEntry 2 }
|
|
|
|
ifMauAutoNegConfig OBJECT-TYPE
|
|
|
|
|
|
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
configuring(2),
|
|
complete(3),
|
|
disabled(4),
|
|
parallelDetectFail(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value indicating the current status of the
|
|
auto-negotiation process. The enumeration
|
|
parallelDetectFail(5) maps to a failure in
|
|
parallel detection as defined in 28.2.3.1 of
|
|
[IEEE802.3]."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.4, aAutoNegAutoConfig."
|
|
::= { ifMauAutoNegEntry 4 }
|
|
|
|
ifMauAutoNegCapability OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This object has been deprecated in favour of
|
|
ifMauAutoNegCapabilityBits.
|
|
|
|
A value that uniquely identifies the set of
|
|
capabilities of the local auto-negotiation
|
|
entity. The value is a sum that initially
|
|
takes the value zero. Then, for each capability
|
|
of this interface, 2 raised to the power noted
|
|
below is added to the sum. For example, an
|
|
interface that has the capability to support
|
|
only 100Base-TX half duplex would have a value
|
|
of 32768 (2**15). In contrast, an interface
|
|
that supports both 100Base-TX half duplex and
|
|
100Base-TX full duplex would have a value of
|
|
98304 ((2**15) + (2**16)).
|
|
|
|
The powers of 2 assigned to the capabilities are
|
|
these:
|
|
|
|
Power Capability
|
|
0 other or unknown
|
|
(1-9) (reserved)
|
|
10 10BASE-T half duplex mode
|
|
11 10BASE-T full duplex mode
|
|
12 (reserved)
|
|
|
|
|
|
|
|
13 (reserved)
|
|
14 100BASE-T4
|
|
15 100BASE-TX half duplex mode
|
|
16 100BASE-TX full duplex mode
|
|
17 (reserved)
|
|
18 (reserved)
|
|
19 100BASE-T2 half duplex mode
|
|
20 100BASE-T2 full duplex mode
|
|
|
|
Note that interfaces that support this MIB may
|
|
have capabilities that extend beyond the scope
|
|
of this MIB."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.5,
|
|
aAutoNegLocalTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 5 }
|
|
|
|
ifMauAutoNegCapAdvertised OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This object has been deprecated in favour of
|
|
ifMauAutoNegCapAdvertisedBits.
|
|
|
|
A value that uniquely identifies the set of
|
|
capabilities advertised by the local
|
|
auto-negotiation entity. Refer to
|
|
ifMauAutoNegCapability for a description of the
|
|
possible values of this object.
|
|
|
|
Capabilities in this object that are not
|
|
available in ifMauAutoNegCapability cannot be
|
|
enabled."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.6,
|
|
aAutoNegAdvertisedTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 6 }
|
|
|
|
ifMauAutoNegCapReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This object has been deprecated in favour of
|
|
ifMauAutoNegCapReceivedBits.
|
|
|
|
A value that uniquely identifies the set of
|
|
|
|
|
|
|
|
capabilities received from the remote
|
|
auto-negotiation entity. Refer to
|
|
ifMauAutoNegCapability for a description of the
|
|
possible values of this object.
|
|
|
|
Note that interfaces that support this MIB may
|
|
be attached to remote auto-negotiation entities
|
|
that have capabilities beyond the scope of this
|
|
MIB."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.7,
|
|
aAutoNegReceivedTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 7 }
|
|
|
|
ifMauAutoNegRestart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restart(1),
|
|
norestart(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If the value of this object is set to
|
|
restart(1) then this will force auto-negotiation
|
|
to begin link renegotiation. If auto-negotiation
|
|
signaling is disabled, a write to this object
|
|
has no effect.
|
|
Setting the value of this object to norestart(2)
|
|
has no effect."
|
|
REFERENCE "[IEEE802.3], 30.6.1.2.1,
|
|
acAutoNegRestartAutoConfig."
|
|
::= { ifMauAutoNegEntry 8 }
|
|
|
|
ifMauAutoNegCapabilityBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the set of
|
|
capabilities of the local auto-negotiation
|
|
entity. Note that interfaces that support this
|
|
MIB may have capabilities that extend beyond the
|
|
scope of this MIB.
|
|
|
|
Note that the local auto-negotiation entity may
|
|
support some capabilities beyond the scope of
|
|
this MIB. This is indicated by returning the
|
|
bit value bOther in addition to any bit values
|
|
for standard capabilities that are listed in the
|
|
IANAifMauAutoNegCapBits TC."
|
|
|
|
|
|
|
|
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.5,
|
|
aAutoNegLocalTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 9 }
|
|
|
|
ifMauAutoNegCapAdvertisedBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the set of
|
|
capabilities advertised by the local
|
|
auto-negotiation entity.
|
|
|
|
Capabilities in this object that are not
|
|
available in ifMauAutoNegCapabilityBits cannot
|
|
be enabled.
|
|
|
|
Note that the local auto-negotiation entity may
|
|
advertise some capabilities beyond the scope of
|
|
this MIB. This is indicated by returning the
|
|
bit value bOther in addition to any bit values
|
|
for standard capabilities that are listed in the
|
|
IANAifMauAutoNegCapBits TC."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.6,
|
|
aAutoNegAdvertisedTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 10 }
|
|
|
|
ifMauAutoNegCapReceivedBits OBJECT-TYPE
|
|
SYNTAX IANAifMauAutoNegCapBits
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the set of
|
|
capabilities received from the remote
|
|
auto-negotiation entity.
|
|
Note that interfaces that support this MIB may
|
|
be attached to remote auto-negotiation entities
|
|
that have capabilities beyond the scope of this
|
|
MIB. This is indicated by returning the bit
|
|
value bOther in addition to any bit values for
|
|
standard capabilities that are listed in the
|
|
IANAifMauAutoNegCapBits TC."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.7,
|
|
aAutoNegReceivedTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 11 }
|
|
|
|
ifMauAutoNegRemoteFaultAdvertised OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noError(1),
|
|
offline(2),
|
|
|
|
|
|
|
|
linkFailure(3),
|
|
autoNegError(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies any local fault
|
|
indications that this MAU has detected and will
|
|
advertise at the next auto-negotiation
|
|
interaction for 1000Mbps MAUs."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.6,
|
|
aAutoNegAdvertisedTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 12 }
|
|
|
|
ifMauAutoNegRemoteFaultReceived OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noError(1),
|
|
offline(2),
|
|
linkFailure(3),
|
|
autoNegError(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies any fault indications
|
|
received from the far end of a link by the
|
|
local auto-negotiation entity for 1000Mbps
|
|
MAUs."
|
|
REFERENCE "[IEEE802.3], 30.6.1.1.7,
|
|
aAutoNegReceivedTechnologyAbility."
|
|
::= { ifMauAutoNegEntry 13 }
|
|
|
|
|
|
--
|
|
-- The Basic Broadband MAU Table
|
|
--
|
|
|
|
broadMauBasicTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BroadMauBasicEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This entire table has been deprecated. There
|
|
have been no reported implementations of this
|
|
table, and it is unlikely that there ever will
|
|
be. IEEE recommends that broadband MAU types
|
|
should not be used for new installations.
|
|
|
|
Table of descriptive and status information
|
|
|
|
|
|
|
|
about the broadband MAUs connected to
|
|
interfaces."
|
|
::= { dot3BroadMauBasicGroup 1 }
|
|
|
|
broadMauBasicEntry OBJECT-TYPE
|
|
SYNTAX BroadMauBasicEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
An entry in the table, containing information
|
|
about a single broadband MAU."
|
|
INDEX { broadMauIfIndex,
|
|
broadMauIndex
|
|
}
|
|
::= { broadMauBasicTable 1 }
|
|
|
|
BroadMauBasicEntry ::=
|
|
SEQUENCE {
|
|
broadMauIfIndex InterfaceIndex,
|
|
broadMauIndex Integer32,
|
|
broadMauXmtRcvSplitType INTEGER,
|
|
broadMauXmtCarrierFreq Integer32,
|
|
broadMauTranslationFreq Integer32
|
|
}
|
|
|
|
broadMauIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This variable uniquely identifies the interface
|
|
to which the MAU described by this entry is
|
|
connected."
|
|
REFERENCE "RFC 2863, ifIndex."
|
|
::= { broadMauBasicEntry 1 }
|
|
|
|
broadMauIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only -- read-only since originally an
|
|
-- SMIv1 index
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This variable uniquely identifies the MAU
|
|
connected to interface broadMauIfIndex that is
|
|
|
|
|
|
|
|
described by this entry."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.1, aMAUID."
|
|
::= { broadMauBasicEntry 2 }
|
|
|
|
broadMauXmtRcvSplitType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
single(2),
|
|
dual(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This object indicates the type of frequency
|
|
multiplexing/cabling system used to separate the
|
|
transmit and receive paths for the 10BROAD36
|
|
MAU.
|
|
|
|
The value other(1) is returned if the split type
|
|
is not either single or dual.
|
|
|
|
The value single(2) indicates a single cable
|
|
system. The value dual(3) indicates a dual
|
|
cable system, offset normally zero."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.8, aBbMAUXmitRcvSplitType."
|
|
::= { broadMauBasicEntry 3 }
|
|
|
|
broadMauXmtCarrierFreq OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This variable indicates the transmit carrier
|
|
frequency of the 10BROAD36 MAU in MHz/4; that
|
|
is, in units of 250 kHz."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.9,
|
|
aBroadbandFrequencies.xmitCarrierFrequency."
|
|
::= { broadMauBasicEntry 4 }
|
|
|
|
broadMauTranslationFreq OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS OBJECT IS DEPRECATED **********
|
|
|
|
This variable indicates the translation offset
|
|
|
|
|
|
|
|
frequency of the 10BROAD36 MAU in MHz/4; that
|
|
is, in units of 250 kHz."
|
|
REFERENCE "[IEEE802.3], 30.5.1.1.9,
|
|
aBroadbandFrequencies.translationFrequency."
|
|
::= { broadMauBasicEntry 5 }
|
|
|
|
-- Notifications for use by 802.3 MAUs
|
|
|
|
snmpDot3MauTraps OBJECT IDENTIFIER ::= { snmpDot3MauMgt 0 }
|
|
|
|
rpMauJabberTrap NOTIFICATION-TYPE
|
|
OBJECTS { rpMauJabberState }
|
|
STATUS current
|
|
DESCRIPTION "This trap is sent whenever a managed repeater
|
|
MAU enters the jabber state.
|
|
|
|
The agent MUST throttle the generation of
|
|
consecutive rpMauJabberTraps so that there is at
|
|
least a five-second gap between them."
|
|
REFERENCE "[IEEE802.3], 30.5.1.3.1, nJabber notification."
|
|
::= { snmpDot3MauTraps 1 }
|
|
|
|
ifMauJabberTrap NOTIFICATION-TYPE
|
|
OBJECTS { ifMauJabberState }
|
|
STATUS current
|
|
DESCRIPTION "This trap is sent whenever a managed interface
|
|
MAU enters the jabber state.
|
|
|
|
The agent MUST throttle the generation of
|
|
consecutive ifMauJabberTraps so that there is at
|
|
least a five-second gap between them."
|
|
|
|
REFERENCE "[IEEE802.3], 30.5.1.3.1, nJabber notification."
|
|
::= { snmpDot3MauTraps 2 }
|
|
|
|
-- Conformance information
|
|
|
|
mauModConf
|
|
OBJECT IDENTIFIER ::= { mauMod 1 }
|
|
mauModCompls
|
|
OBJECT IDENTIFIER ::= { mauModConf 1 }
|
|
mauModObjGrps
|
|
OBJECT IDENTIFIER ::= { mauModConf 2 }
|
|
mauModNotGrps
|
|
OBJECT IDENTIFIER ::= { mauModConf 3 }
|
|
|
|
-- Object groups
|
|
|
|
|
|
|
|
|
|
mauRpGrpBasic OBJECT-GROUP
|
|
OBJECTS { rpMauGroupIndex,
|
|
rpMauPortIndex,
|
|
rpMauIndex,
|
|
rpMauType,
|
|
rpMauStatus,
|
|
rpMauMediaAvailable,
|
|
rpMauMediaAvailableStateExits,
|
|
rpMauJabberState,
|
|
rpMauJabberingStateEnters
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Basic conformance group for MAUs attached to
|
|
repeater ports. This group is also the
|
|
conformance specification for RFC 1515
|
|
implementations."
|
|
::= { mauModObjGrps 1 }
|
|
|
|
mauRpGrp100Mbs OBJECT-GROUP
|
|
OBJECTS { rpMauFalseCarriers }
|
|
STATUS current
|
|
DESCRIPTION "Conformance group for MAUs attached to
|
|
repeater ports with 100 Mb/s or greater
|
|
capability."
|
|
::= { mauModObjGrps 2 }
|
|
|
|
mauRpGrpJack OBJECT-GROUP
|
|
OBJECTS { rpJackType }
|
|
STATUS current
|
|
DESCRIPTION "Conformance group for MAUs attached to
|
|
repeater ports with managed jacks."
|
|
::= { mauModObjGrps 3 }
|
|
|
|
mauIfGrpBasic OBJECT-GROUP
|
|
OBJECTS { ifMauIfIndex,
|
|
ifMauIndex,
|
|
ifMauType,
|
|
ifMauStatus,
|
|
ifMauMediaAvailable,
|
|
ifMauMediaAvailableStateExits,
|
|
ifMauJabberState,
|
|
ifMauJabberingStateEnters
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Basic conformance group for MAUs attached to
|
|
interfaces. This group also provides a
|
|
conformance specification for RFC 1515
|
|
implementations."
|
|
|
|
|
|
|
|
::= { mauModObjGrps 4 }
|
|
|
|
mauIfGrp100Mbs OBJECT-GROUP
|
|
OBJECTS { ifMauFalseCarriers,
|
|
ifMauTypeList,
|
|
ifMauDefaultType,
|
|
ifMauAutoNegSupported
|
|
}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
|
|
|
|
Conformance group for MAUs attached to
|
|
interfaces with 100 Mb/s capability.
|
|
|
|
This object group has been deprecated in favor
|
|
of mauIfGrpHighCapacity."
|
|
::= { mauModObjGrps 5 }
|
|
|
|
mauIfGrpJack OBJECT-GROUP
|
|
OBJECTS { ifJackType }
|
|
STATUS current
|
|
DESCRIPTION "Conformance group for MAUs attached to
|
|
interfaces with managed jacks."
|
|
::= { mauModObjGrps 6 }
|
|
|
|
mauIfGrpAutoNeg OBJECT-GROUP
|
|
OBJECTS { ifMauAutoNegAdminStatus,
|
|
ifMauAutoNegRemoteSignaling,
|
|
ifMauAutoNegConfig,
|
|
ifMauAutoNegCapability,
|
|
ifMauAutoNegCapAdvertised,
|
|
ifMauAutoNegCapReceived,
|
|
ifMauAutoNegRestart
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
|
|
|
|
Conformance group for MAUs attached to
|
|
interfaces with managed auto-negotiation.
|
|
|
|
This object group has been deprecated in favor
|
|
of mauIfGrpAutoNeg2."
|
|
::= { mauModObjGrps 7 }
|
|
|
|
mauBroadBasic OBJECT-GROUP
|
|
OBJECTS { broadMauIfIndex,
|
|
broadMauIndex,
|
|
|
|
|
|
|
|
broadMauXmtRcvSplitType,
|
|
broadMauXmtCarrierFreq,
|
|
broadMauTranslationFreq
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION "********* THIS GROUP IS DEPRECATED **********
|
|
Conformance group for broadband MAUs attached
|
|
to interfaces.
|
|
|
|
This object group is deprecated. There have
|
|
been no reported implementations of this group,
|
|
and it was felt to be unlikely that there will
|
|
be any future implementations."
|
|
::= { mauModObjGrps 8 }
|
|
|
|
mauIfGrpHighCapacity OBJECT-GROUP
|
|
OBJECTS { ifMauFalseCarriers,
|
|
ifMauTypeListBits,
|
|
ifMauDefaultType,
|
|
ifMauAutoNegSupported
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Conformance group for MAUs attached to
|
|
interfaces with 100 Mb/s or greater capability."
|
|
::= { mauModObjGrps 9 }
|
|
|
|
mauIfGrpAutoNeg2 OBJECT-GROUP
|
|
OBJECTS { ifMauAutoNegAdminStatus,
|
|
ifMauAutoNegRemoteSignaling,
|
|
ifMauAutoNegConfig,
|
|
ifMauAutoNegCapabilityBits,
|
|
ifMauAutoNegCapAdvertisedBits,
|
|
ifMauAutoNegCapReceivedBits,
|
|
ifMauAutoNegRestart
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Conformance group for MAUs attached to
|
|
interfaces with managed auto-negotiation."
|
|
::= { mauModObjGrps 10 }
|
|
|
|
mauIfGrpAutoNeg1000Mbps OBJECT-GROUP
|
|
OBJECTS { ifMauAutoNegRemoteFaultAdvertised,
|
|
ifMauAutoNegRemoteFaultReceived
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Conformance group for 1000Mbps MAUs attached to
|
|
interfaces with managed auto-negotiation."
|
|
::= { mauModObjGrps 11 }
|
|
|
|
|
|
|
|
mauIfGrpHCStats OBJECT-GROUP
|
|
OBJECTS { ifMauHCFalseCarriers }
|
|
STATUS current
|
|
DESCRIPTION "Conformance for high capacity statistics for
|
|
MAUs attached to interfaces."
|
|
::= { mauModObjGrps 12 }
|
|
|
|
-- Notification groups
|
|
|
|
rpMauNotifications NOTIFICATION-GROUP
|
|
NOTIFICATIONS { rpMauJabberTrap }
|
|
STATUS current
|
|
DESCRIPTION "Notifications for repeater MAUs."
|
|
::= { mauModNotGrps 1 }
|
|
|
|
ifMauNotifications NOTIFICATION-GROUP
|
|
NOTIFICATIONS { ifMauJabberTrap }
|
|
STATUS current
|
|
DESCRIPTION "Notifications for interface MAUs."
|
|
::= { mauModNotGrps 2 }
|
|
|
|
-- Compliances
|
|
|
|
mauModRpCompl MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
|
|
Compliance for MAUs attached to repeater
|
|
ports.
|
|
|
|
This compliance is deprecated and replaced by
|
|
mauModRpCompl2, which corrects an oversight by
|
|
allowing rpMauStatus to be implemented
|
|
read-only."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mauRpGrpBasic }
|
|
|
|
GROUP mauRpGrp100Mbs
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have 100Mb/s or
|
|
greater capability."
|
|
|
|
GROUP mauRpGrpJack
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have one or more
|
|
external jacks."
|
|
|
|
GROUP rpMauNotifications
|
|
|
|
|
|
|
|
DESCRIPTION "Implementation of this group is recommended
|
|
for MAUs attached to repeater ports."
|
|
::= { mauModCompls 1 }
|
|
|
|
mauModIfCompl MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
|
|
|
|
Compliance for MAUs attached to interfaces.
|
|
This compliance is deprecated and replaced by
|
|
mauModIfCompl2."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mauIfGrpBasic }
|
|
|
|
GROUP mauIfGrp100Mbs
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have 100Mb/s
|
|
capability."
|
|
|
|
GROUP mauIfGrpJack
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have one or more
|
|
external jacks."
|
|
|
|
GROUP mauIfGrpAutoNeg
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for MAUs that support managed
|
|
auto-negotiation."
|
|
|
|
GROUP mauBroadBasic
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for broadband MAUs."
|
|
|
|
GROUP ifMauNotifications
|
|
DESCRIPTION "Implementation of this group is recommended
|
|
for MAUs attached to interfaces."
|
|
::= { mauModCompls 2 }
|
|
|
|
mauModIfCompl2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ********
|
|
|
|
Compliance for MAUs attached to interfaces.
|
|
|
|
This compliance is deprecated and replaced by
|
|
mauModIfCompl3."
|
|
|
|
|
|
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mauIfGrpBasic }
|
|
|
|
GROUP mauIfGrpHighCapacity
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have 100Mb/s
|
|
or greater capability."
|
|
|
|
GROUP mauIfGrpJack
|
|
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have one or more
|
|
external jacks."
|
|
|
|
GROUP mauIfGrpAutoNeg2
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for MAUs that support managed
|
|
auto-negotiation."
|
|
|
|
GROUP mauIfGrpAutoNeg1000Mbps
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for MAUs that have 1000Mb/s or greater
|
|
capability and support managed
|
|
auto-negotiation."
|
|
|
|
GROUP ifMauNotifications
|
|
DESCRIPTION "Implementation of this group is recommended
|
|
for MAUs attached to interfaces."
|
|
|
|
OBJECT ifMauStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
::= { mauModCompls 3 }
|
|
|
|
mauModRpCompl2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "Compliance for MAUs attached to repeater
|
|
ports.
|
|
|
|
Note that compliance with this compliance
|
|
statement requires compliance with the
|
|
snmpRptrModCompl MODULE-COMPLIANCE statement of
|
|
the SNMP-REPEATER-MIB (RFC 2108)."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mauRpGrpBasic }
|
|
|
|
GROUP mauRpGrp100Mbs
|
|
|
|
|
|
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have 100Mb/s or
|
|
greater capability."
|
|
|
|
GROUP mauRpGrpJack
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have one or more
|
|
external jacks."
|
|
|
|
GROUP rpMauNotifications
|
|
|
|
DESCRIPTION "Implementation of this group is recommended
|
|
for MAUs attached to repeater ports."
|
|
|
|
OBJECT rpMauStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
::= { mauModCompls 4 }
|
|
|
|
mauModIfCompl3 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "Compliance for MAUs attached to interfaces.
|
|
|
|
Note that compliance with this compliance
|
|
statement requires compliance with the
|
|
ifCompliance3 MODULE-COMPLIANCE statement of the
|
|
IF-MIB (RFC 2863) and the dot3Compliance2
|
|
MODULE-COMPLIANCE statement of the
|
|
EtherLike-MIB (RFC3635)."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mauIfGrpBasic }
|
|
|
|
GROUP mauIfGrpHighCapacity
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have 100Mb/s
|
|
or greater capability."
|
|
|
|
GROUP mauIfGrpHCStats
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for MAUs that have 1000Mb/s capacity, and
|
|
is recommended for MAUs that have 100Mb/s
|
|
capacity."
|
|
|
|
GROUP mauIfGrpJack
|
|
DESCRIPTION "Implementation of this optional group is
|
|
recommended for MAUs that have one or more
|
|
external jacks."
|
|
|
|
|
|
|
|
GROUP mauIfGrpAutoNeg2
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for MAUs that support managed
|
|
auto-negotiation."
|
|
GROUP mauIfGrpAutoNeg1000Mbps
|
|
DESCRIPTION "Implementation of this group is mandatory
|
|
for MAUs that have 1000Mb/s or greater
|
|
capability and support managed
|
|
auto-negotiation."
|
|
|
|
GROUP ifMauNotifications
|
|
DESCRIPTION "Implementation of this group is recommended
|
|
for MAUs attached to interfaces."
|
|
|
|
OBJECT ifMauStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION "Write access is not required."
|
|
::= { mauModCompls 5 }
|
|
|
|
END
|