Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
3146 lines
111 KiB
Text
3146 lines
111 KiB
Text
IEEE802171-CFM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ******************************************************************
|
|
-- IEEE P802.1ag(TM) CFM MIB
|
|
-- ******************************************************************
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Integer32, Counter32,
|
|
Unsigned32, zeroDotZero FROM SNMPv2-SMI -- [RFC2578]
|
|
TEXTUAL-CONVENTION,
|
|
TimeInterval,
|
|
TimeStamp, RowStatus,
|
|
TruthValue, MacAddress FROM SNMPv2-TC -- [RFC2579]
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
|
|
InterfaceIndex FROM IF-MIB -- [RFC2863]
|
|
LldpChassisId,
|
|
LldpChassisIdSubtype,
|
|
LldpManAddress,
|
|
LldpPortId,
|
|
LldpPortIdSubtype FROM LLDP-MIB -- [IEEExxx]
|
|
VlanIdOrNone, VlanId FROM Q-BRIDGE-MIB -- [RFC4363]
|
|
AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
|
|
TransportDomain,
|
|
TransportAddress FROM TRANSPORT-ADDRESS-MIB -- [RFC3419]
|
|
;
|
|
|
|
ieee8021cfmMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200611040000Z" -- 09/07/2006 00:00GMT
|
|
ORGANIZATION "IEEE 802.1 Working Group"
|
|
CONTACT-INFO
|
|
"WG-URL: http://grouper.ieee.org/groups/802/1/index.html
|
|
WG-EMail: stds-802-1@ieee.org
|
|
|
|
Contact: David Elie-Dit-Cosaque
|
|
|
|
Alcatel North America
|
|
3400 W. Plano Pkwy.
|
|
Plano, TX 75075, USA
|
|
|
|
E-mail: david.elie_dit_cosaque@alcatel.com
|
|
"
|
|
DESCRIPTION
|
|
"Conectivity Fault Management module for managing IEEE 802.1ag"
|
|
REVISION "200611040000Z" -- 09/07/2006 00:00GMT
|
|
DESCRIPTION
|
|
"Included in IEEE P802.1ag Draft 7."
|
|
::= { iso std(0) iso8802(8802) ieee802dot1(1)
|
|
ieee802dot1mibs(1) 3 }
|
|
|
|
dot1agNotifications OBJECT IDENTIFIER ::= { ieee8021cfmMIB 0 }
|
|
dot1agMIBObjects OBJECT IDENTIFIER ::= { ieee8021cfmMIB 1 }
|
|
|
|
-- ******************************************************************
|
|
-- Groups in the CFM MIB Module
|
|
-- ******************************************************************
|
|
dot1agCfmStack OBJECT IDENTIFIER ::= { dot1agMIBObjects 1 }
|
|
dot1agCfmDefaultMdLevel OBJECT IDENTIFIER ::= { dot1agMIBObjects 2 }
|
|
dot1agCfmConfigErrorList OBJECT IDENTIFIER ::= { dot1agMIBObjects 3 }
|
|
dot1agCfmMd OBJECT IDENTIFIER ::= { dot1agMIBObjects 4 }
|
|
dot1agCfmMa OBJECT IDENTIFIER ::= { dot1agMIBObjects 5 }
|
|
dot1agCfmMep OBJECT IDENTIFIER ::= { dot1agMIBObjects 6 }
|
|
|
|
-- ******************************************************************
|
|
-- Textual conventions
|
|
-- ******************************************************************
|
|
|
|
Dot1agCfmMaintDomainNameType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type (and thereby the format)
|
|
of a Dot1agCfmMaintDomainName. The value can be one of
|
|
the following:
|
|
|
|
|
|
ieeeReserved(0) Reserved for definition by IEEE 802.1
|
|
recommend to not use zero unless
|
|
absolutely needed.
|
|
none(1) No format specified, usually because
|
|
there is not (yet) a Maintenenace
|
|
Domain Name. In this case, a zero
|
|
length OCTET STRING for the Domain
|
|
Name field is acceptable.
|
|
dnsLikeName(2) Domain Name like string, globally unique
|
|
text string derived from a DNS name.
|
|
macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
|
|
charString(4) RFC2579 DisplayString, except that the
|
|
character codes 0-31 (decimal) are not
|
|
used.
|
|
ieeeReserved(xx) Reserved for definition by IEEE 802.1
|
|
xx values can be [5..31] and [64..255]
|
|
ituReserved(xx) Reserved for definition by ITU-T Y.1731
|
|
xx values range from [32..63]
|
|
|
|
To support future extensions, the Dot1agCfmMaintDomainNameType
|
|
textual convention SHOULD NOT be sub-typed in object type
|
|
definitions. It MAY be sub-typed in compliance statements in
|
|
order to require only a subset of these address types for a
|
|
compliant implementation.
|
|
|
|
Implementations must ensure that Dot1agCfmMaintDomainNameType
|
|
objects and any dependent objects (e.g.,
|
|
Dot1agCfmMaintDomainName objects) are consistent. An
|
|
inconsistentValue error must be generated if an attempt to
|
|
change an Dot1agCfmMaintDomainNameType object would, for
|
|
example, lead to an undefined Dot1agCfmMaintDomainName value.
|
|
In particular,
|
|
Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs
|
|
must be changed together if the nameType changes.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 21.6.5, Table 21-19"
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
dnsLikeName (2),
|
|
macAddressAndUint (3),
|
|
charString (4)
|
|
}
|
|
|
|
Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes a generic Maintenance Domain Name.
|
|
|
|
A Dot1agCfmMaintDomainName value is always interpreted within
|
|
the context of a Dot1agCfmMaintDomainNameType value. Every
|
|
usage of the Dot1agCfmMaintDomainName textual convention is
|
|
required to specify the Dot1agCfmMaintDomainNameType object
|
|
that provides the context. It is suggested that the
|
|
Dot1agCfmMaintDomainNameType object be logically registered
|
|
before the object(s) that use the Dot1agCfmMaintDomainName
|
|
textual convention, if they appear in the same logical row.
|
|
|
|
The value of a Dot1agCfmMaintDomainName object must always
|
|
be consistent with the value of the associated
|
|
Dot1agCfmMaintDomainNameType object. Attempts to set
|
|
an Dot1agCfmMaintDomainName object to a value inconsistent
|
|
with the associated Dot1agCfmMaintDomainNameType must fail
|
|
with an inconsistentValue error.
|
|
|
|
When this textual convention is used as the syntax of an
|
|
index object, there may be issues with the limit of 128
|
|
sub-identifiers specified in SMIv2, IETF STD 58. In this
|
|
case, the object definition MUST include a 'SIZE' clause
|
|
to limit the number of potential instance sub-identifiers;
|
|
otherwise the applicable constraints MUST be stated in
|
|
the appropriate conceptual row DESCRIPTION clauses, or
|
|
in the surrounding documentation if there is no single
|
|
DESCRIPTION clause that is appropriate.
|
|
|
|
A value of none(1) in the associated
|
|
Dot1agCfmMaintDomainNameType object means that no Maintenance
|
|
Domain name is present, and the contents of the
|
|
Dot1agCfmMaintDomainName object are meaningless.
|
|
|
|
See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
|
|
TEXTUAL-CONVENTION for a discussion of the length limits on
|
|
the Maintenance Domain name and Maintenance Association name.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 21.6.5"
|
|
SYNTAX OCTET STRING (SIZE(1..43))
|
|
|
|
Dot1agCfmMaintAssocNameType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type (and thereby the format)
|
|
of a Dot1agCfmMaintAssocName. The value can be one of
|
|
the following:
|
|
|
|
|
|
ieeeReserved(0) Reserved for definition by IEEE 802.1
|
|
recommend to not use zero unless
|
|
absolutely needed.
|
|
primaryVid(1) Primary VLAN ID.
|
|
12 bits represented in a 2-octet integer:
|
|
- 4 least significant bits of the first
|
|
byte contains the 4 most significant
|
|
bits of the 12 bits primary VID
|
|
- second byte contains the 8 least
|
|
significant bits of the primary VID
|
|
|
|
0 1 2 3 4 5 6 7 8
|
|
+-+-+-+-+-+-+-+-+
|
|
|0 0 0 0| (MSB) |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VID LSB |
|
|
+-+-+-+-+-+-+-+-+
|
|
|
|
charString(2) RFC2579 DisplayString, except that the
|
|
character codes 0-31 (decimal) are not
|
|
used. (1..47)octets
|
|
unsignedInt16 (3) 2-octet integer/big endian
|
|
rfc2865VpnId(4) RFC 2685 VPN ID
|
|
3 octet VPN authority Organizationally
|
|
Unique Identifier followed by 4 octet VPN
|
|
index identifying VPN according to the OUI:
|
|
|
|
0 1 2 3 4 5 6 7 8
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN OUI (MSB) |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN OUI |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN OUI (LSB) |
|
|
+-+-+-+-+-+-+-+-+
|
|
|VPN Index (MSB)|
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN Index |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN Index |
|
|
+-+-+-+-+-+-+-+-+
|
|
|VPN Index (LSB)|
|
|
+-+-+-+-+-+-+-+-+
|
|
|
|
ieeeReserved(xx) Reserved for definition by IEEE 802.1
|
|
xx values can be [5..31] and [64..255]
|
|
ituReserved(xx) Reserved for definition by ITU-T Y.1731
|
|
xx values range from [32..63]
|
|
|
|
To support future extensions, the Dot1agCfmMaintAssocNameType
|
|
textual convention SHOULD NOT be sub-typed in object type
|
|
definitions. It MAY be sub-typed in compliance statements in
|
|
order to require only a subset of these address types for a
|
|
compliant implementation.
|
|
|
|
Implementations must ensure that Dot1agCfmMaintAssocNameType
|
|
objects and any dependent objects (e.g.,
|
|
Dot1agCfmMaintAssocName objects) are consistent. An
|
|
inconsistentValue error must be generated if an attempt to
|
|
change an Dot1agCfmMaintAssocNameType object would, for
|
|
example, lead to an undefined Dot1agCfmMaintAssocName value.
|
|
In particular,
|
|
Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs
|
|
must be changed together if the nameType changes.
|
|
|
|
The Mainteanance Domain name and Maintenance Assication name,
|
|
when put together into the CCM PDU, MUST total 48 octets or
|
|
less. If the Dot1agCfmMaintDomainNameType object contains
|
|
none(1), then the Dot1agCfmMaintAssocName object MUST be
|
|
45 octets or less in length. Otherwise, the length of
|
|
the Dot1agCfmMaintDomainName object plus the length of the
|
|
Dot1agCfmMaintAssocName object, added together, MUST total
|
|
less than or equal to 44 octets.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 21.6.5.4, Table 21-20"
|
|
SYNTAX INTEGER {
|
|
primaryVid (1),
|
|
charString (2),
|
|
unsignedInt16 (3),
|
|
rfc2865VpnId (4)
|
|
}
|
|
|
|
Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes a generic Maintenance Association Name. It is the
|
|
part of the Maintenance Association Identifier which is
|
|
unique within the Maintenance Domain Name and is appended
|
|
to the Maintenance Domain Name to form the Maintenance
|
|
Association Identifier (MAID).
|
|
|
|
A Dot1agCfmMaintAssocName value is always interpreted within
|
|
the context of a Dot1agCfmMaintAssocNameType value. Every
|
|
usage of the Dot1agCfmMaintAssocName textual convention is
|
|
required to specify the Dot1agCfmMaintAssocNameType object
|
|
that provides the context. It is suggested that the
|
|
Dot1agCfmMaintAssocNameType object be logically registered
|
|
before the object(s) that use the Dot1agCfmMaintAssocName
|
|
textual convention, if they appear in the same logical row.
|
|
|
|
The value of a Dot1agCfmMaintAssocName object must
|
|
always be consistent with the value of the associated
|
|
Dot1agCfmMaintAssocNameType object. Attempts to set
|
|
an Dot1agCfmMaintAssocName object to a value inconsistent
|
|
with the associated Dot1agCfmMaintAssocNameType must fail
|
|
with an inconsistentValue error.
|
|
|
|
When this textual convention is used as the syntax of an
|
|
index object, there may be issues with the limit of 128
|
|
sub-identifiers specified in SMIv2, IETF STD 58. In this
|
|
case, the object definition MUST include a 'SIZE' clause
|
|
to limit the number of potential instance sub-identifiers;
|
|
otherwise the applicable constraints MUST be stated in
|
|
the appropriate conceptual row DESCRIPTION clauses, or
|
|
in the surrounding documentation if there is no single
|
|
DESCRIPTION clause that is appropriate.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
|
|
SYNTAX OCTET STRING (SIZE(1..45))
|
|
|
|
|
|
Dot1agCfmMaintenanceDomainLevel ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer identifying the Maintenance Domain Level (MD Level).
|
|
Higher numbers correspond to higher Maintenance Domains,
|
|
those with the greatest physical reach, with the highest
|
|
values for customers' CFM packets. Lower numbers correspond
|
|
to lower Maintenance Domains, those with more limited
|
|
physical reach, with the lowest values for single bridges or
|
|
physical links.
|
|
|
|
The value (-1) is reserved to indicate that no MA Level has
|
|
been assigned.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 18.3, 21.4.1"
|
|
SYNTAX Integer32 (-1 | 0..7)
|
|
|
|
Dot1agCfmMpDirection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the direction in which the Maintenance
|
|
association (MEP or MIP) faces on the bridge port:
|
|
|
|
down(1) Sends Continuity Check Messages away from the
|
|
MAC Relay Entity.
|
|
up(2) Sends Continuity Check Messages towards the
|
|
MAC Relay Entity.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.6.3.2:c"
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
up (2)
|
|
}
|
|
|
|
Dot1agCfmPortStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value from he Port Status TLV from the last CCM
|
|
received from the last MEP. It indicates the ability of the
|
|
Bridge Port on which the transmitting MEP resides to pass
|
|
ordinary data, regardless of the status of the MAC
|
|
(Table 21-10).
|
|
|
|
psNoPortStateTLV(0) Indicates either that no CCM has been
|
|
received or that no port status TLV was
|
|
present in the last CCM received.
|
|
|
|
psBlocked(1) Ordinary data cannot pass freely through
|
|
the port on which the remote MEP resides.
|
|
Value of enableRmepDefect is equal to
|
|
false.
|
|
|
|
psUp(2): Ordinary data can pass freely through
|
|
the port on which the remote MEP resides.
|
|
Value of enableRmepDefect is equal to
|
|
true.
|
|
|
|
NOTE: A 0 value is used for psNoPortStateTLV, so that
|
|
additional code points can be added in a manner
|
|
consistent with the Dot1agCfmInterfaceStatus textual
|
|
convention.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:f, 20.19.3 and 21.5.4"
|
|
SYNTAX INTEGER {
|
|
psNoPortStateTLV (0),
|
|
psBlocked (1),
|
|
psUp (2)
|
|
}
|
|
|
|
Dot1agCfmInterfaceStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value from the Interface Status TLV from the
|
|
last CCM received from the last MEP. It indicates the status
|
|
of the Interface within which the MEP transmitting the CCM
|
|
is configuredr, or the next lower Interface in the Interface
|
|
Stack, if the MEP is not configured within an Interface.
|
|
|
|
isNoInterfaceSatatusTLV(0) Indicates either that no CCM has been
|
|
received or that no interface status TLV
|
|
was present in the last CCM received.
|
|
|
|
isUp(1) The interface is ready to pass packets.
|
|
|
|
isDown(2) The interface cannot pass packets
|
|
|
|
isTesting(3) The interface is in some test mode.
|
|
|
|
isUnknown(4) The interface status cannot be determined
|
|
for some reason.
|
|
|
|
isDormant(5) The interface is not in a state to pass
|
|
packets but is in a pending state, waiting
|
|
for some external event.
|
|
|
|
isNotPresent(6) Some component of the interface is missing
|
|
|
|
isLowerLayerDown(7) The interface is down due to state of the
|
|
lower layer interfaces
|
|
|
|
NOTE: A 0 value is used for isNoInterfaceSatatusTLV, so that
|
|
these code points can be kept consistent with new code
|
|
points added to ifOperStatus in the IF-MIB.
|
|
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:g, 20.19.4 and 21.5.5"
|
|
SYNTAX INTEGER {
|
|
isNoInterfaceSatatusTLV (0),
|
|
isUp (1),
|
|
isDown (2),
|
|
isTesting (3),
|
|
isUnknown (4),
|
|
isDormant (5),
|
|
isNotPresent (6),
|
|
isLowerLayerDown (7)
|
|
}
|
|
|
|
Dot1agCfmHighestDefectPri ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value, equal to the contents of the variable
|
|
highestDefect (20.33.9 and Table 20-1), indicating the
|
|
highest-priority defect that has been present since the MEP
|
|
Fault Notification Generator State Machine was last in the
|
|
FNG_RESET state, either:
|
|
|
|
none(1) no defects since FNG_RESET
|
|
defRDICCM(2) DefRDICCM
|
|
defMACstatus(3) DefMACstatus
|
|
defRemoteCCM(4) DefRemoteCCM
|
|
defErrorCCM(5) DefErrorCCM
|
|
defXconCCM(6) DefXconCCM
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 20.1.2, 12.14.7.7.2:c and 20.33.9"
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
defRDICCM (2),
|
|
defMACstatus (3),
|
|
defRemoteCCM (4),
|
|
defErrorCCM (5),
|
|
defXconCCM (6)
|
|
}
|
|
|
|
Dot1agCfmLowestAlarmPri ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value specifying the lowest priority defect
|
|
that is allowed to generate a Fault Alarm (20.9.5), either:
|
|
|
|
allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM,
|
|
DefErrorCCM, and DefXconCCM;
|
|
macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM,
|
|
DefErrorCCM, and DefXconCCM (default);
|
|
remErrXcon(3) Only DefRemoteCCM, DefErrorCCM,
|
|
and DefXconCCM;
|
|
errXcon(4) Only DefErrorCCM and DefXconCCM;
|
|
xcon(5) Only DefXconCCM; or
|
|
noDef(6) No defects are to be reported;
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:k and 20.9.5"
|
|
SYNTAX INTEGER {
|
|
allDef (1),
|
|
macRemErrXcon (2),
|
|
remErrXcon (3),
|
|
errXcon (4),
|
|
xcon (5),
|
|
noDef (6)
|
|
}
|
|
|
|
Dot1agCfmMepId ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier (MEPID): A small
|
|
integer, unique over a given Maintenance Association,
|
|
identifying a specific MEP.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 3.19 and 19.2.1"
|
|
SYNTAX Unsigned32 (1..8191)
|
|
|
|
Dot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier (MEPID): A small
|
|
integer, unique over a given Maintenance Association,
|
|
identifying a specific MEP.
|
|
|
|
The special value 0 is allowed to indicate special cases, for
|
|
example that no MEPID is configured in a given Maintenance
|
|
Assosiation point.
|
|
|
|
Whenever an object is defined with this SYNTAX, then the
|
|
DESCRIPTION clause of such an object MUST specify what the
|
|
special value of 0 means.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 19.2.1"
|
|
SYNTAX Unsigned32 (0 | 1..8191)
|
|
|
|
|
|
Dot1agCfmMhfCreation ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the Management Entity can create MHFs.
|
|
The valid values are:
|
|
|
|
defMHFnone(1) No MHFs can be created for this VID.
|
|
defMHFdefault(2) MHFs can be created on this VID on any
|
|
Bridge port through which this VID can
|
|
pass.
|
|
defMHFexplicit(3) MHFs can be created for this VID only on
|
|
Bridge ports through which this VID can
|
|
pass, and only if a MEP is created at some
|
|
lower MA Level.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.5.1.3:c and 22.2.3"
|
|
SYNTAX INTEGER {
|
|
defMHFnone (1),
|
|
defMHFdefault (2),
|
|
defMHFexplicit (3)
|
|
}
|
|
|
|
Dot1agCfmCcmInterval ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the interval at which CCMs are sent by a MEP.
|
|
The possible values are:
|
|
intervalInvalid(0) No CCMs are sent (disabled).
|
|
interval300Hz(1) CCMs are sent every 3 1/3 milliseconds
|
|
(300Hz).
|
|
interval10ms(2) CCMs are sent every 10 milliseconds.
|
|
interval100ms(3) CCMs are sent every 100 milliseconds.
|
|
interval1s(4) CCMs are sent every 1 second.
|
|
interval10s(5) CCMs are sent every 10 seconds.
|
|
interval1min(6) CCMs are sent every minute.
|
|
interval10min(7) CCMs are sent every 10 minutes.
|
|
|
|
Note: enumerations start at zero to match the 'CCM Interval
|
|
field' protocol field.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.6.1.3:d, 20.8.1 and 21.6.1.3"
|
|
SYNTAX INTEGER {
|
|
intervalInvalid (0),
|
|
interval300Hz (1),
|
|
interval10ms (2),
|
|
interval100ms (3),
|
|
interval1s (4),
|
|
interval10s (5),
|
|
interval1min (6),
|
|
interval10min (7)
|
|
}
|
|
|
|
Dot1agCfmFngState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the diferent states of the MEP Fault Notification
|
|
Generator State Machine.
|
|
|
|
fngReset(1) No defect has been present since the
|
|
dot1agCfmMepFngResetTime timer
|
|
expired, or since the state machine
|
|
was last reset.
|
|
|
|
fngDefect(2) A defect is present, but not for a
|
|
long enough time to be reported
|
|
(dot1agCfmMepFngAlarmTime).
|
|
|
|
fngReportDefect(3) A momentary state during which the
|
|
defect is reported by sending a
|
|
dot1agCfmFaultAlarm notification,
|
|
if that action is enabled.
|
|
|
|
fngDefectReported(4) A defect is present, and some defect
|
|
has been reported.
|
|
|
|
fngDefectClearing(5) No defect is present, but the
|
|
dot1agCfmMepFngResetTime timer has
|
|
not yet expired.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:f and 20.35"
|
|
SYNTAX INTEGER {
|
|
fngReset (1),
|
|
fngDefect (2),
|
|
fngReportDefect (3),
|
|
fngDefectReported (4),
|
|
fngDefectClearing (5)
|
|
}
|
|
|
|
Dot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values the Relay action field can take."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and
|
|
Table 21-27"
|
|
SYNTAX INTEGER {
|
|
rlyHit (1),
|
|
rlyFdb (2),
|
|
rlyMpdb (3)
|
|
}
|
|
|
|
Dot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values returned in the ingress action field."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and
|
|
Table 21-30
|
|
"
|
|
SYNTAX INTEGER {
|
|
ingOk (1),
|
|
ingDown (2),
|
|
ingBlocked (3),
|
|
ingVid (4)
|
|
}
|
|
|
|
Dot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values returned in the egress action field"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and
|
|
Table 21-32"
|
|
SYNTAX INTEGER {
|
|
egrOK (1),
|
|
egrDown (2),
|
|
egrBlocked (3),
|
|
egrVid (4)
|
|
}
|
|
|
|
Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational state of the remote MEP state machine. This
|
|
state machine motitors the reception of valid CCMs from a
|
|
remote MEP with a specific MEPID. It uses a timer that
|
|
expires in 3.5 times the lengh of time indicated by the
|
|
dot1agCfmMaCcmInterval object.
|
|
|
|
rMepIdle(1) Momentary state during reset.
|
|
|
|
rMepStart(2) The timer has not expired since the
|
|
state machine was reset, and no valid
|
|
CCM has yet been received.
|
|
|
|
rMepFailed(3) The timer has expired, both since the
|
|
state machine was reset, and since a
|
|
valid CCM was received.
|
|
|
|
rMepOk(4) The timer has not expired since a
|
|
valid CCM was received.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:b, 20.22"
|
|
SYNTAX INTEGER {
|
|
rMepIdle (1),
|
|
rMepStart (2),
|
|
rMepFailed (3),
|
|
rMepOk (4)
|
|
}
|
|
|
|
Dot1afCfmIndexIntegerNextFree ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer which may be used as a new Index in a table.
|
|
|
|
The special value of 0 indicates that no more new entries can
|
|
be created in the relevant table.
|
|
|
|
When a MIB is used for configuration, an object with this
|
|
SYNTAX always contains a legal value (if non-zero) for an
|
|
index that is not currently used in the relevant table. The
|
|
Command Generator (Network Management Application) reads this
|
|
variable and uses the (non-zero) value read when creating a
|
|
new row with an SNMP SET. When the SET is performed, the
|
|
Command Responder (agent) must determine whether the value is
|
|
indeed still unused; Two Network Management Applications may
|
|
attempt to create a row (configuration entry) simultaneously
|
|
and use the same value. If it is currently unused, the SET
|
|
succeeds and the Command Responder (agent) changes the value
|
|
of this object, according to an implementation-specific
|
|
algorithm. If the value is in use, however, the SET fails.
|
|
The Network Management Application must then re-read this
|
|
variable to obtain a new usable value.
|
|
|
|
An OBJECT-TYPE definition using this SYNTAX MUST specify the
|
|
relevant table for which the object is providing this
|
|
functionality.
|
|
"
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
|
|
Dot1agCfmConfigErrors ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"While making the MIP creation evaluation described in 802.1ag
|
|
clause 22.2.3, the management entity can encounter errors in
|
|
the configuration. These are possible errors that can be
|
|
encountered:
|
|
|
|
CFMleak(0) MA x is associated with a specific VID list,
|
|
one or more of the VIDs in MA x can pass through
|
|
the Bridge Port, no Down MEP is configured on
|
|
any Bridge Port for MA x, and some other MA y,
|
|
at a higher MD Level than MA x, and associated
|
|
with at least one of the VID(s) also in MA x,
|
|
does have a MEP configured on the Bridge Port.
|
|
|
|
conflictingVids(1) MA x is associated with a specific VID
|
|
list, an Up MEP is configured on MA x on the
|
|
Bridge Port, and some other MA y, associated
|
|
with at least one of the VID(s) also in MA x,
|
|
also has an Up MEP configured on some Bridge
|
|
Port.
|
|
|
|
ExcessiveLevels(2) The number of different MD Levels at
|
|
which MIPs are to be created on this port
|
|
exceeds the Bridge's capabilities (see
|
|
subclause 22.3).
|
|
|
|
OverlappedLevels(3) A MEP is created for one VID at one MD
|
|
Level, but a MEP is configured on another
|
|
VID at that MD Level or higher, exceeding
|
|
the Bridge's capabilities.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.4.1.3:b and clauses 22.2.3 and 22.2.4"
|
|
SYNTAX BITS {
|
|
cfmLeak(0),
|
|
conflictingVids(1),
|
|
excessiveLevels(2),
|
|
overlappedLevels(3)
|
|
}
|
|
|
|
-- ******************************************************************
|
|
-- The Stack Object. This group will contain all the MIBs objects
|
|
-- needed to access the Stack managed object.
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- The CFM Stack Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmStackTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is one CFM Stack Managed object per bridge. It permits
|
|
the retrieval of information about the maintenance Points
|
|
configured on any given interface.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.2"
|
|
::= { dot1agCfmStack 1 }
|
|
|
|
dot1agCfmStackEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmStackEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Stack table entry"
|
|
INDEX { dot1agCfmStackifIndex, dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex, dot1agCfmStackDirection
|
|
}
|
|
::= { dot1agCfmStackTable 1 }
|
|
|
|
Dot1agCfmStackEntry ::= SEQUENCE {
|
|
dot1agCfmStackifIndex InterfaceIndex,
|
|
dot1agCfmStackDirection Dot1agCfmMpDirection,
|
|
dot1agCfmStackMepId Dot1agCfmMepIdOrZero,
|
|
dot1agCfmStackMacAddress MacAddress
|
|
}
|
|
|
|
dot1agCfmStackifIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Bridge Port or aggregated port
|
|
on which MEPs or MHFs might be configured.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:a"
|
|
::= { dot1agCfmStackEntry 1 }
|
|
|
|
dot1agCfmStackDirection OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMpDirection
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Direction in which the MP faces on the Bridge Port"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:c"
|
|
::= { dot1agCfmStackEntry 2 }
|
|
|
|
dot1agCfmStackMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If an MEP is configured, the MEPID, else 0"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.2:d"
|
|
::= { dot1agCfmStackEntry 3 }
|
|
|
|
dot1agCfmStackMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the MP."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.2.1.3:e"
|
|
::= { dot1agCfmStackEntry 4 }
|
|
|
|
-- *******************************************************************
|
|
-- The Default MD Level object. This group will contain all the
|
|
-- MIB objects needed to access and modify default MD level
|
|
-- managed objects.
|
|
-- *******************************************************************
|
|
|
|
-- *******************************************************************
|
|
-- The Default MD Level Table
|
|
-- *******************************************************************
|
|
|
|
dot1agCfmDefaultMdLevelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmDefaultMdLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Default MD Level Managed Object controls MHF creation for
|
|
VIDs that are not attached to a specific Maintenance
|
|
Association Managed Object.
|
|
|
|
The writable objects in this table need to be persistent upon reboot
|
|
or restart of a device.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.3"
|
|
::= { dot1agCfmDefaultMdLevel 1 }
|
|
|
|
dot1agCfmDefaultMdLevelEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmDefaultMdLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Default MD Level table entry."
|
|
INDEX { dot1agCfmDefaultMdLevelIndex}
|
|
::= { dot1agCfmDefaultMdLevelTable 1 }
|
|
|
|
Dot1agCfmDefaultMdLevelEntry ::= SEQUENCE {
|
|
dot1agCfmDefaultMdLevelIndex Unsigned32,
|
|
dot1agCfmDefaultMdLevelVid VlanIdOrNone,
|
|
dot1agCfmDefaultMdLevelMhfCreation Dot1agCfmMhfCreation,
|
|
dot1agCfmDefaultMdLevelLevel Dot1agCfmMaintenanceDomainLevel
|
|
}
|
|
|
|
dot1agCfmDefaultMdLevelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the default MD Level table"
|
|
::= { dot1agCfmDefaultMdLevelEntry 1 }
|
|
|
|
dot1agCfmDefaultMdLevelVid OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a VLAN ID monitored by MA."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.3.1.3:a"
|
|
::= { dot1agCfmDefaultMdLevelEntry 2 }
|
|
|
|
dot1agCfmDefaultMdLevelMhfCreation OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMhfCreation
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value indicating if the Management entity can create MHFs
|
|
(MIP Half Function) for this VID.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.3.1.3:b"
|
|
DEFVAL {defMHFnone}
|
|
::= { dot1agCfmDefaultMdLevelEntry 3 }
|
|
|
|
dot1agCfmDefaultMdLevelLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintenanceDomainLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MD Level at which MHFs are to be created, or -1 if
|
|
defMHFnone.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.3.1.3:c"
|
|
DEFVAL {-1}
|
|
::= { dot1agCfmDefaultMdLevelEntry 4}
|
|
|
|
-- ******************************************************************
|
|
-- The Cfm configuration error list managed object. This group will
|
|
-- contain all the MIB objects used to read the interfaces and VIDs
|
|
-- configured incorrectly.
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- The CFM Configuration Error List Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmConfigErrorListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmConfigErrorListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CFM Configuration Error List table provides a list of
|
|
Interfaces and VIDs that are incorrectly configured.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.4"
|
|
::= {dot1agCfmConfigErrorList 1}
|
|
|
|
dot1agCfmConfigErrorListEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmConfigErrorListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Config Error List Table entry"
|
|
INDEX { dot1agCfmConfigErrorListVid,
|
|
dot1agCfmConfigErrorListIfIndex
|
|
}
|
|
::= { dot1agCfmConfigErrorListTable 1}
|
|
|
|
Dot1agCfmConfigErrorListEntry ::= SEQUENCE {
|
|
dot1agCfmConfigErrorListVid VlanId,
|
|
dot1agCfmConfigErrorListIfIndex InterfaceIndex,
|
|
dot1agCfmConfigErrorListErrorType Dot1agCfmConfigErrors
|
|
}
|
|
|
|
|
|
dot1agCfmConfigErrorListVid OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan ID of the vlan with errored interfaces."
|
|
REFERENCE
|
|
"802.1ag Clause 12.14.4.1.2:a"
|
|
::= { dot1agCfmConfigErrorListEntry 1 }
|
|
|
|
dot1agCfmConfigErrorListIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the IfIndex of the interface."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.4.1.2:b"
|
|
::= { dot1agCfmConfigErrorListEntry 2 }
|
|
|
|
dot1agCfmConfigErrorListErrorType OBJECT-TYPE
|
|
SYNTAX Dot1agCfmConfigErrors
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A vector of Boolean error conditions from 22.2.4, any of
|
|
which may be true:
|
|
|
|
1) CFMleak;
|
|
2) ConflictingVids;
|
|
3) ExcessiveLevels;
|
|
4) OverlappedLevels.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.4.1.3:b"
|
|
::= { dot1agCfmConfigErrorListEntry 3 }
|
|
|
|
-- ******************************************************************
|
|
-- The Maintenance Domain Managed Object. This group containa all
|
|
-- the MIB objects used to maintain Maintenance Domains.
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMdTableNextIndex OBJECT-TYPE
|
|
SYNTAX Dot1afCfmIndexIntegerNextFree
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an unused value for dot1agCfmMdIndex in
|
|
the dot1agCfmMdTable, or a zero to indicate that none exist.
|
|
"
|
|
::= { dot1agCfmMd 1 }
|
|
|
|
-- ******************************************************************
|
|
-- The Maintenance Domain Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmMdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MaintenanceDomain table. Each row in the table represents
|
|
a different maintenance domain.
|
|
|
|
A Maintenace domain is described in 802.1ag (3.22) as the
|
|
network or the part of the network for which faults in
|
|
connectivity are to be managed. The boundary of a Maintenance
|
|
Domain is defined by a set of DSAPs, each of which can become
|
|
a point of connectivity to a service instance.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 3.22 and 18.1"
|
|
::= { dot1agCfmMd 2 }
|
|
|
|
dot1agCfmMdEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain table entry. This entry is not lost
|
|
upon reboot. It is backed up by stable storage.
|
|
"
|
|
INDEX {dot1agCfmMdIndex }
|
|
::= { dot1agCfmMdTable 1 }
|
|
|
|
Dot1agCfmMdEntry ::= SEQUENCE {
|
|
dot1agCfmMdIndex Unsigned32,
|
|
dot1agCfmMdFormat Dot1agCfmMaintDomainNameType,
|
|
dot1agCfmMdName Dot1agCfmMaintDomainName,
|
|
dot1agCfmMdLevel Dot1agCfmMaintenanceDomainLevel,
|
|
dot1agCfmMdMhfCreation Dot1agCfmMhfCreation,
|
|
dot1agCfmMdFaultAlarmDestDomain TransportDomain,
|
|
dot1agCfmMdFaulAlarmDestAddress TransportAddress,
|
|
dot1agCfmMdRowStatus RowStatus
|
|
}
|
|
|
|
dot1agCfmMdIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the maintenance domain table.
|
|
|
|
dot1agCfmMdTableNextIndex needs to be inspected to find an
|
|
available index for row-creation.
|
|
|
|
Referential integrity is required i.e. the index needs to be
|
|
persistent upon a reboot or restart of a device. The index
|
|
can never be reused for other maintenance domain. The index
|
|
value should keep increasing up to the time that they wrap
|
|
around. This is to facilitate access control based on OID.
|
|
"
|
|
::= { dot1agCfmMdEntry 1 }
|
|
|
|
dot1agCfmMdFormat OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintDomainNameType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type (and thereby format) of the Maintenance Domain Name."
|
|
REFERENCE
|
|
"802.1ag clause 21.6.5.1"
|
|
DEFVAL { charString }
|
|
::= { dot1agCfmMdEntry 2 }
|
|
|
|
dot1agCfmMdName OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintDomainName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain name. The type/format of this object
|
|
is determined by the value of the dot1agCfmMdNameType object.
|
|
|
|
Each Maintenance Domain has unique name amongst all those
|
|
used or available to a service provider or operator. It
|
|
facilitates easy identification of administrative
|
|
responsibility for each Maintenance Domain.
|
|
|
|
Clause 3.24 defines a Maintenance Domain name as the
|
|
identifier, unique over the domain for which CFM is to
|
|
protect against accidental concatenation of Service
|
|
Instances, of a particular Maintenance Domain.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 3.24, 12.14.5, and 21.6.5.3"
|
|
DEFVAL { "DEFAULT" }
|
|
::= { dot1agCfmMdEntry 3 }
|
|
|
|
dot1agCfmMdLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintenanceDomainLevel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain Level."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.5.1.3:b"
|
|
DEFVAL { 0 }
|
|
::= { dot1agCfmMdEntry 4 }
|
|
|
|
dot1agCfmMdMhfCreation OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMhfCreation
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerated value indicating whether the management entity can
|
|
create MHFs (MIP Half Function) for this Maintenance Domain.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.5.1.3:c"
|
|
DEFVAL { defMHFnone }
|
|
::= { dot1agCfmMdEntry 5 }
|
|
|
|
dot1agCfmMdFaultAlarmDestDomain OBJECT-TYPE
|
|
SYNTAX TransportDomain
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transportDomain for the address to which Fault Alarms
|
|
are to be transmitted.
|
|
|
|
Typical values will be one of (not all inclusive) list:
|
|
|
|
transportDomainUdpIpv4 (from TRANSPORT-ADDRESS-MIB)
|
|
transportDomainUdpIpv6 (from TRANSPORT-ADDRESS-MIB)
|
|
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB)
|
|
|
|
The value 'zeroDotZero' indicates 'Fault Alarms are not to
|
|
be transmitted', in which case the related object of SYNTAX
|
|
TransportAddress must have a zero-length OCTET STRING as
|
|
a value.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.5.1.3:d"
|
|
DEFVAL { zeroDotZero }
|
|
::= { dot1agCfmMdEntry 6 }
|
|
|
|
dot1agCfmMdFaulAlarmDestAddress OBJECT-TYPE
|
|
SYNTAX TransportAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transportAddress to which Fault Alarms are to be
|
|
transmitted to. The type/format of this object is determined
|
|
by the value of the dot1agCfmMdFaultAlarmDestDomain.
|
|
|
|
If the dot1agCfmMdFaultAlarmDestDomain object has a value of
|
|
'zeroDotZero' (indicating 'Fault Alarms are not to be
|
|
transmitted') then this object should have a value of a
|
|
zero-length OCTET STRING.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.5.1.3:d"
|
|
DEFVAL { "" }
|
|
::= { dot1agCfmMdEntry 7 }
|
|
|
|
dot1agCfmMdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { dot1agCfmMdEntry 8 }
|
|
|
|
-- ******************************************************************
|
|
-- The Maintenance Association Object. This group contains all the
|
|
-- MIB objects used to read, create, modify, and delete Maintenance
|
|
-- Associations in the MIB.
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMaTableNextIndex OBJECT-TYPE
|
|
SYNTAX Dot1afCfmIndexIntegerNextFree
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value to be used as the index of the MA table when the
|
|
management entity wants to create a new row in the table.
|
|
"
|
|
::= { dot1agCfmMa 1 }
|
|
|
|
-- ******************************************************************
|
|
-- The Maintenance Association (MA) Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmMaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Association table. Each row in the table
|
|
represents an MA. An MA is a set of MEPs, each configured
|
|
with a single service instance.
|
|
|
|
Creation of a Service Instance establishes a connectionless
|
|
association among the selected DSAPs. Configuring a
|
|
Maintenance association End Point (MEP) at each of the
|
|
DSAPs creates a Maintenance Association (MA) to monitor
|
|
that connectionless connectivity. The MA is identified by a
|
|
Short MA Name that is unique within the Maintenance Domain
|
|
and chosen to facilitate easy identification of the Service
|
|
Instance. Together, the Maintenance Domain Name and the
|
|
Short MA Name form the Maintenance Association Identifier
|
|
(MAID) that is carried in CFM Messages to identify
|
|
incorrect connectivity among Service Instances. A small
|
|
integer, the Maintenance association End Point Identifier
|
|
(MEPID), identifies each MEP among those configured on a
|
|
single MA (802.1ag clauses 3.17 and 18.2).
|
|
|
|
This table uses two indices, first index is the index of the
|
|
Maintenance Domain table.
|
|
|
|
The writable objects in this table need to be persistent
|
|
upon reboot or restart of a device.
|
|
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 18.2"
|
|
::= { dot1agCfmMa 3 }
|
|
|
|
dot1agCfmMaEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MA table entry."
|
|
INDEX {dot1agCfmMdIndex, dot1agCfmMaIndex }
|
|
::= { dot1agCfmMaTable 1 }
|
|
|
|
Dot1agCfmMaEntry ::= SEQUENCE {
|
|
dot1agCfmMaIndex Unsigned32,
|
|
dot1agCfmMaFormat Dot1agCfmMaintAssocNameType,
|
|
dot1agCfmMaName Dot1agCfmMaintAssocName,
|
|
dot1agCfmMaMhfCreation Dot1agCfmMhfCreation,
|
|
dot1agCfmMaCcmInterval Dot1agCfmCcmInterval,
|
|
dot1agCfmMaFaultAlarmDestDomain TransportDomain,
|
|
dot1agCfmMaFaulAlarmDestAddress TransportAddress,
|
|
dot1agCfmMaMoreThanOneVid TruthValue,
|
|
dot1agCfmMaRowStatus RowStatus
|
|
}
|
|
|
|
dot1agCfmMaIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4094 | 16777217..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Index of the MA table dot1agCfmMaTableNextIndex needs to
|
|
be inspected to find an available index for row-creation
|
|
1..4094 -> describes an MA entry associated
|
|
with a VID
|
|
16777217..4294967295 -> describes an MA entry not associated
|
|
with any VID
|
|
"
|
|
::= { dot1agCfmMaEntry 1 }
|
|
|
|
dot1agCfmMaFormat OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintAssocNameType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type (and thereby format) of the Maintenance Association
|
|
Name.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 21.6.5.4"
|
|
::= { dot1agCfmMaEntry 2 }
|
|
|
|
dot1agCfmMaName OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintAssocName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Short Maintenance Association name. The type/format of
|
|
this object is determined by the value of the
|
|
dot1agCfmMaNameType object.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 21.6.5.6, and Table 21-20"
|
|
::= { dot1agCfmMaEntry 3 }
|
|
|
|
dot1agCfmMaMhfCreation OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMhfCreation
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the Management entity can create MHFs (MIP Half
|
|
Function) for this MA.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:c"
|
|
DEFVAL { defMHFnone }
|
|
::= { dot1agCfmMaEntry 4 }
|
|
|
|
dot1agCfmMaCcmInterval OBJECT-TYPE
|
|
SYNTAX Dot1agCfmCcmInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between CCM transmissions to be used by all MEPs
|
|
in the MA.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:d"
|
|
DEFVAL { interval1s }
|
|
::= { dot1agCfmMaEntry 5 }
|
|
|
|
dot1agCfmMaFaultAlarmDestDomain OBJECT-TYPE
|
|
SYNTAX TransportDomain
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transportDomain for the address to which Fault Alarms
|
|
are to be transmitted.
|
|
|
|
Typical values will be one of (not all inclusive) list:
|
|
|
|
transportDomainUdpIpv4 (from TRANSPORT-ADDRESS-MIB)
|
|
transportDomainUdpIpv6 (from TRANSPORT-ADDRESS-MIB)
|
|
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB)
|
|
|
|
The value 'zeroDotZero' indicates 'Fault Alarms are not to
|
|
be transmitted', in which case the related object of SYNTAX
|
|
transportAddress must have a zero-length OCTET STRING as
|
|
a value.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:e"
|
|
DEFVAL { zeroDotZero }
|
|
::= { dot1agCfmMaEntry 6 }
|
|
|
|
dot1agCfmMaFaulAlarmDestAddress OBJECT-TYPE
|
|
SYNTAX TransportAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transportAddress to which Fault Alarms are to be
|
|
transmitted to. The type/format of this object is determined
|
|
by the value of the dot1agCfmMaFaultAlarmDestDomain.
|
|
|
|
If the dot1agCfmMaFaultAlarmDestDomain object has a value of
|
|
'zeroDotZero' (indicating 'Fault Alarms are not to be
|
|
transmitted') then this object should have a value of a
|
|
zero-length OCTET STRING.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:e"
|
|
DEFVAL { "" }
|
|
::= { dot1agCfmMaEntry 7 }
|
|
|
|
dot1agCfmMaMoreThanOneVid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicate that the MA is associated with more that one
|
|
VID. False indicates that the MA is associated with only one
|
|
VID or no VID. This value should be false for MAs with an
|
|
index greater than 16777216.
|
|
"
|
|
::= { dot1agCfmMaEntry 8 }
|
|
|
|
dot1agCfmMaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { dot1agCfmMaEntry 9 }
|
|
|
|
-- ******************************************************************
|
|
-- The Maintenance Association (MA) VLAN Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMaVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmMaVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If an MA is associated with multiple VIDs, then this table
|
|
contains all the VIDs associated with the MA other than the
|
|
primary VID.
|
|
|
|
The writable objects in this table need to be persistent
|
|
upon reboot or restart of a device.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:b"
|
|
::= { dot1agCfmMa 4 }
|
|
|
|
dot1agCfmMaVlanEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Association VLAN table entry."
|
|
INDEX { dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMaVlanVid
|
|
}
|
|
::= { dot1agCfmMaVlanTable 1 }
|
|
|
|
Dot1agCfmMaVlanEntry ::= SEQUENCE {
|
|
dot1agCfmMaVlanVid VlanId,
|
|
dot1agCfmMaVlanRowStatus RowStatus
|
|
}
|
|
|
|
dot1agCfmMaVlanVid OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a VLAN ID of the vlan monitored by the MA. VID 0
|
|
means that the MA is not associated with any VLAN.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:b"
|
|
::= { dot1agCfmMaVlanEntry 1 }
|
|
|
|
dot1agCfmMaVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { dot1agCfmMaVlanEntry 2 }
|
|
|
|
-- ******************************************************************
|
|
-- The list of known MEPs for a given MA
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMaMepListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmMaMepListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of MEPIDs (in any bridge) that belong to the same MA.
|
|
|
|
Clause 12.14.6.1.3 specifies that a list of MEPIDs in all
|
|
bridges in that MA, but since SNMP SMI does not allow to
|
|
state in a MIB that an object in a table is an array, the
|
|
information has to be stored in another table with two
|
|
indices, being the first index, the index of the table that
|
|
contains the list or array.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:f"
|
|
::= { dot1agCfmMa 8 }
|
|
|
|
dot1agCfmMaMepListEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaMepListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The known MEPS table entry."
|
|
INDEX { dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMaMepListIdentifier
|
|
}
|
|
::= { dot1agCfmMaMepListTable 1 }
|
|
|
|
Dot1agCfmMaMepListEntry ::= SEQUENCE {
|
|
dot1agCfmMaMepListIdentifier Dot1agCfmMepId,
|
|
dot1agCfmMaMepListRowStatus RowStatus
|
|
}
|
|
|
|
dot1agCfmMaMepListIdentifier OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEPID"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.6.1.3:f"
|
|
::= { dot1agCfmMaMepListEntry 1 }
|
|
|
|
dot1agCfmMaMepListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row. Read SNMPv2-TC (RFC1903) for an
|
|
explanation of the possible values this object can take.
|
|
"
|
|
::= { dot1agCfmMaMepListEntry 2 }
|
|
|
|
-- ******************************************************************
|
|
-- The MEP Object. This object represents a Maintenance End
|
|
-- Point as described in 802.1ag document.
|
|
-- ******************************************************************
|
|
|
|
-- ******************************************************************
|
|
-- The MEP Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Association End Point (MEP) table.
|
|
|
|
Each row in the table represents a different MEP. A MEP is
|
|
an actively managed CFM entity, associated with a specific
|
|
DSAP of a Service Instance, which can generate and receive
|
|
CFM PDUs and track any responses. It is an end point of a
|
|
single Maintenance Association, and is an endpoint of a
|
|
separate Maintenance Entity for each of the other MEPs in
|
|
the same Maintenance Association (802.1ag clause 3.18).
|
|
|
|
This table uses three indices. The first two indices are the
|
|
indices of the Maintenance Domain and MA tables, the reason
|
|
being that a MEP is always related to an MA and Maintenance
|
|
Domain.
|
|
|
|
The Transmit Loopback table. Entries in this table are
|
|
created/removed at the same time than entries in the MEP
|
|
table are created/removed.
|
|
|
|
The MEP table also stores all the managed objects for sending
|
|
LBM and LTM.
|
|
|
|
*LBM Managed objects
|
|
|
|
LBM Managed objects in the MEP table
|
|
enables the management entity to initiate
|
|
transmission of Loopback messages. It will signal the MEP
|
|
that it should transmit some number of Loopback messages
|
|
and detect the detection (or lack thereof) of the
|
|
corresponding Loopback messages.
|
|
|
|
Steps to use entries in this table:
|
|
|
|
1) Wait for dot1agCfmMepTransmitLbmStatus value to be
|
|
'ready'. To do this do this sequence:
|
|
a. an SNMP GET for both SnmpSetSerialNo and
|
|
dot1agCfmMepTransmitLbmStatus objects (in same SNMP
|
|
PDU).
|
|
b. Check if value for dot1agCfmMepTransmitLbmStatus is
|
|
'ready'
|
|
- if not, wait x seconds, goto step a above.
|
|
- if yes, save the value of SnmpSetSerialNo and go
|
|
to step 2) below
|
|
2) Change dot1agCfmMepTransmitLbmStatus value from 'ready' to
|
|
'notReady' to ensure no other management entity will use
|
|
the service. In order to not disturb a possible other NMS
|
|
do this by sending an SNMP SET for both SnmpSetSerialNo
|
|
and dot1agCfmMepTransmitLbmStatus objects (in same SNMP
|
|
PDU, and make sure SNmpSetSerialNo is the first varBind).
|
|
For the SnmpSetSerialNo varBind, use the value that you
|
|
obtained in step 1)a.. This ensures that two cooperating
|
|
NMSes will not step on each others toes.
|
|
3) Setup the different data to be sent (number of messages,
|
|
optional TLVs,...).
|
|
4) Record the current values of dot1agCfmMepLbrIn,
|
|
dot1agCfmMepLbrInOutOfOrder, and dot1agCfmMepLbrBadMsdu.
|
|
6) Change dot1agCfmMepTransmitLbmStatus value from 'notReady'
|
|
to 'transmit' to initiate transmission of Loopback
|
|
messages.
|
|
7) Check the value of dot1agCfmMepTransmitLbmResultOK to
|
|
find out if the operation was sucessfully initiated or
|
|
not.
|
|
8) Monitor the value of dot1agCfmMepTransmitLbmMessages.
|
|
When it reaches 0, the last LBM has been transmitted.
|
|
Wait an additional 5 seconds to ensure that all LBRs have
|
|
been returned.
|
|
9) Compare dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder,
|
|
and dot1agCfmMepLbrBadMsdu to their old values from step
|
|
4, above, to get the results of the test.
|
|
10) Change the dot1agCfmMepTransmitLbmStatus value back to
|
|
'ready' to allow other management entities to use the
|
|
table.
|
|
|
|
*LTM Managed objects
|
|
The LTM Managed objects in the MEP table are used in a manner
|
|
similar to that described for LBM transmission, above. Upon
|
|
successfully initiating the transmission, the variables
|
|
dot1agCfmMepTransmitLtmSeqNumber and
|
|
dot1agCfmMepTransmitLtmEgressIdentifier return the information
|
|
required to recover the results of the LTM from the
|
|
dot1agCfmLtrTable.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7 and 19.2"
|
|
::= { dot1agCfmMep 1 }
|
|
|
|
dot1agCfmMepEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP table entry"
|
|
INDEX { dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier
|
|
}
|
|
::= { dot1agCfmMepTable 1 }
|
|
|
|
Dot1agCfmMepEntry ::= SEQUENCE {
|
|
dot1agCfmMepIdentifier Dot1agCfmMepId,
|
|
dot1agCfmMepIfIndex InterfaceIndex,
|
|
dot1agCfmMepDirection Dot1agCfmMpDirection,
|
|
dot1agCfmMepPrimaryVid Unsigned32,
|
|
dot1agCfmMepActive TruthValue,
|
|
dot1agCfmMepFngState Dot1agCfmFngState,
|
|
dot1agCfmMepCciEnabled TruthValue,
|
|
dot1agCfmMepCcmLtmPriority Unsigned32,
|
|
dot1agCfmMepMacAddress MacAddress,
|
|
dot1agCfmMepFaultAlarmDestDomain TransportDomain,
|
|
dot1agCfmMepFaulAlarmDestAddress TransportAddress,
|
|
dot1agCfmMepLowPrDef Dot1agCfmLowestAlarmPri,
|
|
dot1agCfmMepFngAlarmTime TimeInterval,
|
|
dot1agCfmMepFngResetTime TimeInterval,
|
|
dot1agCfmMepHighestPrDefect Dot1agCfmHighestDefectPri,
|
|
dot1agCfmMepSomeRdiDefect TruthValue,
|
|
dot1agCfmMepErrMacStatus TruthValue,
|
|
dot1agCfmMepSomeRMepCcmDefect TruthValue,
|
|
dot1agCfmMepErrorCcmDefect TruthValue,
|
|
dot1agCfmMepXconCcmDefect TruthValue,
|
|
dot1agCfmMepErrorCcmLastFailure OCTET STRING,
|
|
dot1agCfmMepXconCcmLastFailure OCTET STRING,
|
|
dot1agCfmMepRCcmSequenceErrors Counter32,
|
|
dot1agCfmMepCciSentCcms Counter32,
|
|
dot1agCfmMepNextLbmTransId Unsigned32,
|
|
dot1agCfmMepLbrIn Counter32,
|
|
dot1agCfmMepLbrInOutOfOrder Counter32,
|
|
dot1agCfmMepLbrBadMsdu Counter32,
|
|
dot1agCfmMepLtmNextSeqNumber Unsigned32,
|
|
dot1agCfmMepUnexpLtrIn Counter32,
|
|
dot1agCfmMepLbrOut Counter32,
|
|
dot1agCfmMepTransmitLbmStatus TruthValue,
|
|
dot1agCfmMepTransmitLbmDestMacAddress MacAddress,
|
|
dot1agCfmMepTransmitLbmDestMepId Dot1agCfmMepIdOrZero,
|
|
dot1agCfmMepTransmitLbmDestIsMepId TruthValue,
|
|
dot1agCfmMepTransmitLbmMessages Integer32,
|
|
dot1agCfmMepTransmitLbmDataTlv OCTET STRING,
|
|
dot1agCfmMepTransmitLbmVlanPriority Integer32,
|
|
dot1agCfmMepTransmitLbmVlanDropEnable TruthValue,
|
|
dot1agCfmMepTransmitLbmResultOK TruthValue,
|
|
dot1agCfmMepTransmitLbmSeqNumber Unsigned32,
|
|
dot1agCfmMepTransmitLtmStatus TruthValue,
|
|
dot1agCfmMepTransmitLtmFlags BITS,
|
|
dot1agCfmMepTransmitLtmTargetMacAddress MacAddress,
|
|
dot1agCfmMepTransmitLtmTargetMepId Dot1agCfmMepIdOrZero,
|
|
dot1agCfmMepTransmitLtmTargetIsMepId TruthValue,
|
|
dot1agCfmMepTransmitLtmTtl Unsigned32,
|
|
dot1agCfmMepTransmitLtmResult TruthValue,
|
|
dot1agCfmMepTransmitLtmSeqNumber Unsigned32,
|
|
dot1agCfmMepTransmitLtmEgressIdentifier OCTET STRING,
|
|
dot1agCfmMepRowStatus RowStatus
|
|
}
|
|
|
|
dot1agCfmMepIdentifier OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer that is unique among all the MEPs in the same MA.
|
|
Other definition is: a small integer, unique over a given
|
|
Maintenance Association, identifying a specific Maintenance
|
|
association End Point (3.19).
|
|
|
|
MEP Identifier is also known as the MEPID.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 3.19, 19.2 and 12.14.7"
|
|
::= { dot1agCfmMepEntry 1 }
|
|
|
|
dot1agCfmMepIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface eiter a
|
|
bridge port, or an aggregated IEEE 802.1 link within a bridge
|
|
port, to which the MEP is attached.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:b"
|
|
::= { dot1agCfmMepEntry 2 }
|
|
|
|
dot1agCfmMepDirection OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMpDirection
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction in which the MEP faces on the Bridge port."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:c and 19.2"
|
|
::= { dot1agCfmMepEntry 3 }
|
|
|
|
dot1agCfmMepPrimaryVid OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..16777215)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer indicating the Primary VID of the MEP, always
|
|
one of the VIDs assigned to the MEP's MA. The value 0
|
|
indicates that either the Primary VID is that of the
|
|
MEP's MA, or that the MEP's MA is associated with no VID."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:d"
|
|
DEFVAL { 0 }
|
|
::= { dot1agCfmMepEntry 4 }
|
|
|
|
dot1agCfmMepActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrative state of the MEP
|
|
|
|
A Boolean indicating the administrative state of the MEP.
|
|
|
|
True indicates that the MEP is to function normally, and
|
|
false that it is to cease functioning."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:e and 20.9.1"
|
|
DEFVAL { false }
|
|
::= { dot1agCfmMepEntry 5 }
|
|
|
|
dot1agCfmMepFngState OBJECT-TYPE
|
|
SYNTAX Dot1agCfmFngState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current state of the MEP Fault Notification Generator
|
|
State Machine.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:f and 20.35"
|
|
DEFVAL { fngReset }
|
|
::= { dot1agCfmMepEntry 6 }
|
|
|
|
dot1agCfmMepCciEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true, the MEP will generate CCM messages."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:g and 20.10.1"
|
|
DEFVAL { false }
|
|
::= { dot1agCfmMepEntry 7 }
|
|
|
|
dot1agCfmMepCcmLtmPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for CCMs and LTMs transmitted by the MEP.
|
|
Default Value in the highest priority value allowed to pass
|
|
through the bridge port for any of this MEPs VIDs.
|
|
The management entity can obtain the default valuefor this
|
|
variable from the priority regeneration table by extracting the
|
|
highest priority value in this table on this MEPs bridge port.
|
|
(1 is lowest, then 2, then 0, then 3-7).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:h"
|
|
::= { dot1agCfmMepEntry 8 }
|
|
|
|
dot1agCfmMepMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the MEP."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:i and 19.4"
|
|
::= { dot1agCfmMepEntry 9 }
|
|
|
|
dot1agCfmMepFaultAlarmDestDomain OBJECT-TYPE
|
|
SYNTAX TransportDomain
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transportDomain for the address to which Fault Alarms
|
|
are to be transmitted.
|
|
|
|
Typical values will be one of (not all inclusive) list:
|
|
|
|
transportDomainUdpIpv4 (from TRANSPORT-ADDRESS-MIB)
|
|
transportDomainUdpIpv6 (from TRANSPORT-ADDRESS-MIB)
|
|
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB)
|
|
|
|
The value 'zeroDotZero' indicates 'Fault Alarms are not to
|
|
be transmitted', in which case the related object of SYNTAX
|
|
transportAddress must have a zero-length OCTET STRING as
|
|
a value.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:j"
|
|
DEFVAL { zeroDotZero }
|
|
::= { dot1agCfmMepEntry 10 }
|
|
|
|
dot1agCfmMepFaulAlarmDestAddress OBJECT-TYPE
|
|
SYNTAX TransportAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transportAddress to which Fault Alarms (12.14.7.7) are
|
|
to be transmitted to. The type/format of this object is
|
|
determined by the value of dot1agCfmMepFaultAlarmDestDomain.
|
|
|
|
If the dot1agCfmMepFaultAlarmDestDomain object has a value of
|
|
'zeroDotZero' (indicating 'Fault Alarms are not specified')
|
|
then this object should have a value of a zero-length OCTET
|
|
STRING.
|
|
|
|
If 'Fault Alarms are not specified', the address used is
|
|
that from the Maintenance Association managed object
|
|
(12.14.6.1.3:e).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:j"
|
|
DEFVAL { "" }
|
|
::= { dot1agCfmMepEntry 11 }
|
|
|
|
dot1agCfmMepLowPrDef OBJECT-TYPE
|
|
SYNTAX Dot1agCfmLowestAlarmPri
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value specifying the lowest priority defect
|
|
that is allowed to generate fault alarm.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1"
|
|
DEFVAL { macRemErrXcon }
|
|
::= { dot1agCfmMepEntry 12}
|
|
|
|
dot1agCfmMepFngAlarmTime OBJECT-TYPE
|
|
SYNTAX TimeInterval (250..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time that defects must be present before a Fault Alarm is
|
|
issued (fngAlarmTime. 20.33.3) (default 2.5s).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:l and 20.33.3"
|
|
DEFVAL { 250 }
|
|
::= { dot1agCfmMepEntry 13 }
|
|
|
|
dot1agCfmMepFngResetTime OBJECT-TYPE
|
|
SYNTAX TimeInterval (250..1000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time that defects must be absent before re-enabling a
|
|
Fault Alarm (fngResetTime, 20.33.4) (default 10s).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:m and 20.33.4"
|
|
DEFVAL { 1000 }
|
|
::= { dot1agCfmMepEntry 14 }
|
|
|
|
dot1agCfmMepHighestPrDefect OBJECT-TYPE
|
|
SYNTAX Dot1agCfmHighestDefectPri
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest priority defect that has been present since the
|
|
MEPs Fault Notification Generator State Machine was last in
|
|
the FNG_RESET state.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1"
|
|
::= { dot1agCfmMepEntry 15}
|
|
|
|
dot1agCfmMepSomeRdiDefect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag indicating that some other MEP in this MEP's MA
|
|
is transmitting the RDI bit.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:o and 20.33.7"
|
|
::= { dot1agCfmMepEntry 16 }
|
|
|
|
dot1agCfmMepErrMacStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag (someMACstatusDefect, 20.33.6) indicating that
|
|
a Port Status TLV (21.5.4) or Interface Status TLV (21.5.5)
|
|
is indicating an error condition (can trigger DefMACstatus).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:p 20.33.6"
|
|
::= { dot1agCfmMepEntry 17}
|
|
|
|
dot1agCfmMepSomeRMepCcmDefect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag indicating that CCMs are not being received
|
|
from at least one of the configured remote MEPs.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:q and 20.33.5"
|
|
::= { dot1agCfmMepEntry 18 }
|
|
|
|
dot1agCfmMepErrorCcmDefect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag indicating that a stream of erroneous CCMs
|
|
is being received from some MEP in this MEP's MA.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:r and 20.21.3"
|
|
::= { dot1agCfmMepEntry 19 }
|
|
|
|
dot1agCfmMepXconCcmDefect OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag indicating that a stream of CCMs is being
|
|
received from a MEP that may be in some other MA.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:s and 20.23.3"
|
|
::= { dot1agCfmMepEntry 20 }
|
|
|
|
dot1agCfmMepErrorCcmLastFailure OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..1522))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last-received CCM that triggered an DefErrorCCM fault."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:t and 20.21.2"
|
|
::= { dot1agCfmMepEntry 21 }
|
|
|
|
dot1agCfmMepXconCcmLastFailure OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..1522))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last-received CCM that triggered a DefXconCCM fault."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:u and 20.23.2"
|
|
::= { dot1agCfmMepEntry 22 }
|
|
|
|
dot1agCfmMepRCcmSequenceErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of out-of-sequence CCMs received from all
|
|
remote MEPs.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:v and 20.19.7"
|
|
::= { dot1agCfmMepEntry 23 }
|
|
|
|
dot1agCfmMepCciSentCcms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Continuity Check messages transmitted."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:w and 20.10.2"
|
|
::= { dot1agCfmMepEntry 24 }
|
|
|
|
dot1agCfmMepNextLbmTransId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next sequence number/transaction identifier to be sent in a
|
|
Loopback message. This sequence number can be zero because
|
|
it wraps around.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:x and 20.28.2"
|
|
::= { dot1agCfmMepEntry 25 }
|
|
|
|
dot1agCfmMepLbrIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of valid, in-order Loopback Replies received."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:y and 20.31.1"
|
|
::= { dot1agCfmMepEntry 26 }
|
|
|
|
dot1agCfmMepLbrInOutOfOrder OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of valid, out-of-order Loopback Replies
|
|
received.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:z and 20.31.1"
|
|
::= { dot1agCfmMepEntry 27 }
|
|
|
|
dot1agCfmMepLbrBadMsdu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"(optional) The total number of LBRs received whose
|
|
mac_service_data_unit did not match (except for the OpCode)
|
|
that of the corresponding LBM (20.2.3).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:aa 20.2.3"
|
|
::= { dot1agCfmMepEntry 28}
|
|
|
|
dot1agCfmMepLtmNextSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next transaction identifier/sequence number to be sent in a
|
|
Linktrace message. This sequence number can be zero because
|
|
it wraps around.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:ab and 20.36.1"
|
|
::= { dot1agCfmMepEntry 29 }
|
|
|
|
dot1agCfmMepUnexpLtrIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of unexpected LTRs received (20.39.1).
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:ac 20.39.1"
|
|
::= { dot1agCfmMepEntry 30}
|
|
|
|
dot1agCfmMepLbrOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Loopback Replies transmitted."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.1.3:ad ans 20.26.2"
|
|
::= { dot1agCfmMepEntry 31 }
|
|
|
|
dot1agCfmMepTransmitLbmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the bridge port to indicate
|
|
that another LBM may be transmitted.
|
|
Reset to false by the MEP Loopback Initiator State Machine."
|
|
DEFVAL { true }
|
|
::= { dot1agCfmMepEntry 32 }
|
|
|
|
dot1agCfmMepTransmitLbmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address.
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepTransmitLbmDestIsMepId is 'false'.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:b"
|
|
::= { dot1agCfmMepEntry 33 }
|
|
|
|
dot1agCfmMepTransmitLbmDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance association End Point Identifier of another
|
|
MEP in the same Maintenance Association to which the LBM is
|
|
to be sent.
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepTransmitLbmDestIsMepId is 'true'.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:b"
|
|
::= { dot1agCfmMepEntry 34 }
|
|
|
|
dot1agCfmMepTransmitLbmDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MepID of the target MEP is used for
|
|
Loopback transmission.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for Loopback transmission.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:b"
|
|
::= {dot1agCfmMepEntry 35 }
|
|
|
|
dot1agCfmMepTransmitLbmMessages OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loopback messages to be transmitted."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:c"
|
|
DEFVAL { 1 }
|
|
::= {dot1agCfmMepEntry 36 }
|
|
|
|
dot1agCfmMepTransmitLbmDataTlv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary amount of data to be included in the Data TLV,
|
|
if the Data TLV is selected to be sent.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:d"
|
|
::= { dot1agCfmMepEntry 37 }
|
|
|
|
dot1agCfmMepTransmitLbmVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present
|
|
in the transmitted frame.
|
|
|
|
The default value is CCM priority.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:e"
|
|
::= { dot1agCfmMepEntry 38 }
|
|
|
|
dot1agCfmMepTransmitLbmVlanDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Enable bit value to be used in the VLAN tag, if present
|
|
in the transmitted frame.
|
|
|
|
For more information about VLAN Drop Enable, please check
|
|
IEEE 802.1ad.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.2:e"
|
|
DEFVAL { true }
|
|
::= { dot1agCfmMepEntry 39 }
|
|
|
|
dot1agCfmMepTransmitLbmResultOK OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Loopback Message(s) will be
|
|
(or hasbeen) sent.
|
|
- false The Loopback Message(s) will not
|
|
be sent.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.3:a"
|
|
DEFVAL { true }
|
|
::= { dot1agCfmMepEntry 40 }
|
|
|
|
dot1agCfmMepTransmitLbmSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Loopback Transaction Identifier
|
|
(dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent.
|
|
The value returned is undefined if
|
|
dot1agCfmMepTransmitLbmResultOK is false.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.3.3:a"
|
|
::= { dot1agCfmMepEntry 41 }
|
|
|
|
dot1agCfmMepTransmitLtmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the bridge port to indicate
|
|
that another LTM may be transmitted.
|
|
Reset to false by the MEP Linktrace Initiator State Machine."
|
|
DEFVAL { true }
|
|
::= { dot1agCfmMepEntry 42 }
|
|
|
|
dot1agCfmMepTransmitLtmFlags OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
useFDBonly (0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flags field for LTMs transmitted by the MEP."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.2:b and 20.37.1"
|
|
DEFVAL { {useFDBonly } }
|
|
::= { dot1agCfmMepEntry 43 }
|
|
|
|
dot1agCfmMepTransmitLtmTargetMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast
|
|
destination MAC address.
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepTransmitLtmTargetIsMepId is 'false'.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.2:c"
|
|
::= { dot1agCfmMepEntry 44 }
|
|
|
|
dot1agCfmMepTransmitLtmTargetMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be
|
|
transmitted:
|
|
The Maintenance association End Point Identifier of
|
|
another MEP in the same Maintenance Association
|
|
This address will be used if the value of the column
|
|
dot1agCfmMepTransmitLtmTargetIsMepId is 'true'.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.2:c"
|
|
::= { dot1agCfmMepEntry 45 }
|
|
|
|
dot1agCfmMepTransmitLtmTargetIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MepID of the target MEP is used for
|
|
Linktrace transmission.
|
|
False indicates that unicast destination MAC address of the
|
|
target MEP is used for Loopback transmission.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.2:c"
|
|
::= { dot1agCfmMepEntry 46 }
|
|
|
|
dot1agCfmMepTransmitLtmTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LTM TTL field. Default value, if not specified, is 64.
|
|
The TTL field indicates the number of hops remaining to the
|
|
LTM. Decremented by 1 by each Linktrace Responder that
|
|
handles the LTM. The decremented value is returned in the
|
|
LTR. If 0 on input, the LTM is discarded. If 0 on output,
|
|
the LTM is not transmitted to the next hop.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.2:d and 21.8.4"
|
|
DEFVAL {64}
|
|
::= { dot1agCfmMepEntry 47 }
|
|
|
|
dot1agCfmMepTransmitLtmResult OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Linktrace Message will be (or has been) sent.
|
|
- false The Linktrace Message will not be sent"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.3:a"
|
|
DEFVAL { true }
|
|
::= { dot1agCfmMepEntry 48 }
|
|
|
|
dot1agCfmMepTransmitLtmSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LTM Transaction Identifier
|
|
(dot1agCfmMepLtmNextSeqNumber) of the LTM sent.
|
|
The value returned is undefined if
|
|
dot1agCfmMepTransmitLtmResult is false.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.3:a"
|
|
::= { dot1agCfmMepEntry 49 }
|
|
|
|
dot1agCfmMepTransmitLtmEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the MEP Linktrace Initiator that is originating,
|
|
or the Linktrace Responder that is forwarding, this LTM.
|
|
The low-order six octets contain a 48-bit IEEE MAC address
|
|
unique to the system in which the MEP Linktrace Initiator
|
|
or Linktrace Responder resides. The high-order two octets
|
|
contain a value sufficient to uniquely identify the MEP
|
|
Linktrace Initiator or Linktrace Responder within that system.
|
|
|
|
For most Bridges, the address of any MAC attached to the
|
|
Bridge will suffice for the low-order six octets, and 0 for
|
|
the high-order octets. In some situations, e.g. if multiple
|
|
virtual Bridges utilizing emulated LANs are implemented in a
|
|
single physical system, the high-order two octets can be used
|
|
to differentiate among the transmitting entities.
|
|
|
|
The value returned is undefined if
|
|
dot1agCfmMepTransmitLtmResult is false.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.4.3:b and 21.8.8"
|
|
::= { dot1agCfmMepEntry 50 }
|
|
|
|
dot1agCfmMepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns must have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { dot1agCfmMepEntry 51 }
|
|
|
|
-- ******************************************************************
|
|
-- The Linktrace Reply Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmLtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmLtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends the MEP table and contains a list of
|
|
Linktrace replies received by a specific MEP in response to
|
|
a linktrace message.
|
|
|
|
SNMP SMI does not allow to state in a MIB that an object in
|
|
a table is an array. The solution is to take the index (or
|
|
indices) of the first table and add one or more indices.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.5"
|
|
::= { dot1agCfmMep 2 }
|
|
|
|
dot1agCfmLtrEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmLtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LinktraceReply table entry."
|
|
INDEX { dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
dot1agCfmLtrSeqNumber,
|
|
dot1agCfmLtrReceiveOrder
|
|
}
|
|
::= { dot1agCfmLtrTable 1 }
|
|
|
|
Dot1agCfmLtrEntry ::= SEQUENCE {
|
|
dot1agCfmLtrSeqNumber Unsigned32,
|
|
dot1agCfmLtrReceiveOrder Unsigned32,
|
|
dot1agCfmLtrTtl Unsigned32,
|
|
dot1agCfmLtrForwarded TruthValue,
|
|
dot1agCfmLtrTerminalMep TruthValue,
|
|
dot1agCfmLtrLastEgressIdentifier OCTET STRING,
|
|
dot1agCfmLtrNextEgressIdentifier OCTET STRING,
|
|
dot1agCfmLtrRelay Dot1agCfmRelayActionFieldValue,
|
|
dot1agCfmLtrChassisIdSubtype LldpChassisIdSubtype,
|
|
dot1agCfmLtrChassisId LldpChassisId,
|
|
dot1agCfmLtrManAddressType AddressFamilyNumbers,
|
|
dot1agCfmLtrManAddress LldpManAddress,
|
|
dot1agCfmLtrIngress Dot1agCfmIngressActionFieldValue,
|
|
dot1agCfmLtrIngressMac MacAddress,
|
|
dot1agCfmLtrIngressPortIdSubtype LldpPortIdSubtype,
|
|
dot1agCfmLtrIngressPortId LldpPortId,
|
|
dot1agCfmLtrEgress Dot1agCfmEgressActionFieldValue,
|
|
dot1agCfmLtrEgressMac MacAddress,
|
|
dot1agCfmLtrEgressPortIdSubtype LldpPortIdSubtype,
|
|
dot1agCfmLtrEgressPortId LldpPortId,
|
|
dot1agCfmLtrOrganizationSpecificTlv OCTET STRING
|
|
}
|
|
|
|
dot1agCfmLtrSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transaction identifier/Sequence number returned by a previous
|
|
transmit linktrace message command, indicating which LTM's
|
|
response is going to be returned.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.5.2:b"
|
|
::= { dot1agCfmLtrEntry 1}
|
|
|
|
dot1agCfmLtrReceiveOrder OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple LTRs with the same LTR
|
|
Transaction Identifier field value. dot1agCfmLtrReceiveOrder
|
|
are assigned sequentially from 1, in the order that the
|
|
Linktrace Initiator received the LTRs.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.5.2:c"
|
|
::= { dot1agCfmLtrEntry 2 }
|
|
|
|
dot1agCfmLtrTtl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TTL field value for a returned LTR."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.5 and 20.36.2.2"
|
|
::= { dot1agCfmLtrEntry 3 }
|
|
|
|
dot1agCfmLtrForwarded OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if a LTM was forwarded by the repsonding MP, as
|
|
returned ind the 'FwdYes' flag of the flags field.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:c and 20.36.2.1"
|
|
::= { dot1agCfmLtrEntry 4 }
|
|
|
|
dot1agCfmLtrTerminalMep OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A boolean value stating whether the forwarded LTM reached a
|
|
MEP enclosing its MA, as returned in the Terminal MEP flag of
|
|
the Flags field.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:d and 20.36.2.1"
|
|
::= { dot1agCfmLtrEntry 5 }
|
|
|
|
dot1agCfmLtrLastEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Last Egress Identifier returned in
|
|
the LTR.
|
|
The Last Egress Identifier identifies the MEP Linktrace
|
|
Initiator that originated, or the Linktrace Responder that
|
|
forwarded, the LTM to which this LTR is the response. This
|
|
is the same value as the Egress Identifier field of that LTM.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:e and 20.36.2.3"
|
|
::= { dot1agCfmLtrEntry 6 }
|
|
|
|
dot1agCfmLtrNextEgressIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Next Egress Identifier returned in
|
|
the LTR.
|
|
The Next Egress Identifier Identifies the Linktrace Responder
|
|
that transmitted this LTR, and can forward the LTM to the next
|
|
hop. This is the same value as the Egress Identifier of the
|
|
forwarded LTM, if any. If the FwdYes bit of the Flags field is
|
|
false, the contents of this field are undefined, i.e. any value
|
|
can be transmitted, and the field is ignored by the receiver.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:f and 20.36.2.4"
|
|
::= { dot1agCfmLtrEntry 7 }
|
|
|
|
dot1agCfmLtrRelay OBJECT-TYPE
|
|
SYNTAX Dot1agCfmRelayActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value returned in the Relay Action field."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g and 20.36.2.5"
|
|
::= { dot1agCfmLtrEntry 8 }
|
|
|
|
dot1agCfmLtrChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the format of the Chassis ID returned
|
|
in the Sender ID TLV of the LTR, if any. This value is
|
|
meaningless if the dot1agCfmLtrChassisId has a length of 0."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:h and 21.5.3.2"
|
|
::= { dot1agCfmLtrEntry 9 }
|
|
|
|
dot1agCfmLtrChassisId OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Chassis ID returned in the Sender ID TLV of the LTR, if
|
|
any. The format of this object is determined by the
|
|
value of the dot1agCfmLtrChassisIdSubtype object.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:i and 21.5.3.3"
|
|
::= { dot1agCfmLtrEntry 10 }
|
|
|
|
dot1agCfmLtrManAddressType OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management Address subtype of the bridge transmitting the
|
|
LTR, if returned in a Sender ID TLV. The value is
|
|
meaningless if the dot1agCfmLtrManAddress has a length of 0.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:j and 21.5.3.5"
|
|
::= { dot1agCfmLtrEntry 11 }
|
|
|
|
dot1agCfmLtrManAddress OBJECT-TYPE
|
|
SYNTAX LldpManAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management Address information of the bridge transmitting
|
|
the LTR, if returned in the Sender ID TLV.
|
|
|
|
Some limitation to the size of the TLVs carrying a Manaement
|
|
Address is needed, as there is no bound on the lengths of
|
|
AddressFamilyNumbers. 31 octets, the maximum length of
|
|
LldpManAddress, is long enough for currently deployed
|
|
systems. This MIB module assumes that SNMP (IETF STD 62) is
|
|
used along with the Management Address to access the
|
|
management database.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:j and 21.5.3.5"
|
|
::= { dot1agCfmLtrEntry 12 }
|
|
|
|
dot1agCfmLtrIngress OBJECT-TYPE
|
|
SYNTAX Dot1agCfmIngressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Ingress Action Field of the LTM."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:k and 20.36.2.6"
|
|
::= { dot1agCfmLtrEntry 13 }
|
|
|
|
dot1agCfmLtrIngressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address returned in the ingress MAC address field."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:l and 20.36.2.7"
|
|
::= { dot1agCfmLtrEntry 14 }
|
|
|
|
dot1agCfmLtrIngressPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the Ingress Port ID."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:m and 20.36.2.8"
|
|
::= { dot1agCfmLtrEntry 15 }
|
|
|
|
dot1agCfmLtrIngressPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ingress Port ID. The format of this object is determined by
|
|
the value of the dot1agCfmLtrIngressPortIdSubtype object.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:n and 20.36.2.9"
|
|
::= { dot1agCfmLtrEntry 16 }
|
|
|
|
dot1agCfmLtrEgress OBJECT-TYPE
|
|
SYNTAX Dot1agCfmEgressActionFieldValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Egress Action Field of the LTM."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:o and 20.36.2.10"
|
|
::= { dot1agCfmLtrEntry 17 }
|
|
|
|
dot1agCfmLtrEgressMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address returned in the egress MAC address field."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:p and 20.36.2.11"
|
|
::= { dot1agCfmLtrEntry 18 }
|
|
|
|
dot1agCfmLtrEgressPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the egress Port ID."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:q and 20.36.2.12"
|
|
::= { dot1agCfmLtrEntry 19 }
|
|
|
|
dot1agCfmLtrEgressPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Egress Port ID. The format of this object is determined by
|
|
the value of the dot1agCfmLtrEgressPortIdSubtype object.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:r and 20.36.2.13"
|
|
::= { dot1agCfmLtrEntry 20 }
|
|
|
|
dot1agCfmLtrOrganizationSpecificTlv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0|4..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All Organization specific TLVs returned in the LTR, if
|
|
any. Includes all octets including and following the TLV
|
|
Length field of each TLV, concatenated together."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:s, 21.5.2"
|
|
::= { dot1agCfmLtrEntry 21 }
|
|
|
|
-- ******************************************************************
|
|
-- The MEP Database Table
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmMepDbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1agCfmMepDbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP Database. A database, maintained by every MEP, that
|
|
maintains received information about other MEPs in the
|
|
Maintenance Domain.
|
|
|
|
SNMP SMI does not allow to stat in a MIB that an object in
|
|
a table is an array. The solution is to take the index (or
|
|
indices) of the first table and add one or more indices.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 19.2.15"
|
|
::= { dot1agCfmMep 3 }
|
|
|
|
dot1agCfmMepDbEntry OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepDbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP Database table entry."
|
|
INDEX { dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
dot1agCfmMepDbRMepIdentifier
|
|
}
|
|
::= { dot1agCfmMepDbTable 1 }
|
|
|
|
Dot1agCfmMepDbEntry ::= SEQUENCE {
|
|
dot1agCfmMepDbRMepIdentifier Dot1agCfmMepId,
|
|
dot1agCfmMepDbRMepState Dot1agCfmRemoteMepState,
|
|
dot1agCfmMepDbRMepFailedOkTime TimeStamp,
|
|
dot1agCfmMepDbMacAddress MacAddress,
|
|
dot1agCfmMepDbRdi TruthValue,
|
|
dot1agCfmMepDbPortStatusTlv Dot1agCfmPortStatus,
|
|
dot1agCfmMepDbInterfaceStatusTlv Dot1agCfmInterfaceStatus,
|
|
dot1agCfmMepDbChassisIdSubtype LldpChassisIdSubtype,
|
|
dot1agCfmMepDbChassisId LldpChassisId,
|
|
dot1agCfmMepDbManAddressType AddressFamilyNumbers,
|
|
dot1agCfmMepDbManAddress LldpManAddress
|
|
}
|
|
|
|
dot1agCfmMepDbRMepIdentifier OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier of a remote MEP
|
|
whose information from the MEP Database is to be returned.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.2:b"
|
|
::= { dot1agCfmMepDbEntry 1 }
|
|
|
|
dot1agCfmMepDbRMepState OBJECT-TYPE
|
|
SYNTAX Dot1agCfmRemoteMepState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the remote MEP IFF State machines."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:b and 20.22"
|
|
::= { dot1agCfmMepDbEntry 2}
|
|
|
|
dot1agCfmMepDbRMepFailedOkTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (SysUpTime) at which the IFF Remote MEP state machine
|
|
last entered either the RMEP_FAILED or RMEP_OK state.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:c"
|
|
::= { dot1agCfmMepDbEntry 3 }
|
|
|
|
dot1agCfmMepDbMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the remote MEP."
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:d and 20.19.8"
|
|
::= { dot1agCfmMepDbEntry 4 }
|
|
|
|
dot1agCfmMepDbRdi OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the RDI bit in the last received CCM (true for
|
|
RDI=1), or false if none has been received.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:e and 20.19.2"
|
|
::= { dot1agCfmMepDbEntry 5 }
|
|
|
|
dot1agCfmMepDbPortStatusTlv OBJECT-TYPE
|
|
SYNTAX Dot1agCfmPortStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value of the Port status TLV received in the
|
|
last CCM from the remote MEP or the default value
|
|
psNoPortStateTLV indicating either no CCM has been received,
|
|
or that nor port status TLV was received in the last CCM.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:f and 20.19.3"
|
|
DEFVAL { psNoPortStateTLV }
|
|
::= { dot1agCfmMepDbEntry 6}
|
|
|
|
dot1agCfmMepDbInterfaceStatusTlv OBJECT-TYPE
|
|
SYNTAX Dot1agCfmInterfaceStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value of the Interface status TLV received
|
|
in the last CCM from the remote MEP or the default value
|
|
isNoInterfaceStatus TLV indicating either no CCM has been
|
|
received, or that no interface status TLV was received in
|
|
the last CCM.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.6.3:g and 20.19.4"
|
|
DEFVAL { isNoInterfaceSatatusTLV }
|
|
::= { dot1agCfmMepDbEntry 7}
|
|
|
|
dot1agCfmMepDbChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the format of the Chassis ID received
|
|
in the last CCM."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:h and 21.5.3.2"
|
|
::= { dot1agCfmMepDbEntry 8 }
|
|
|
|
dot1agCfmMepDbChassisId OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Chassis ID. The format of this object is determined by the
|
|
value of the dot1agCfmLtrChassisIdSubtype object.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:h and 21.5.3.3"
|
|
::= { dot1agCfmMepDbEntry 9 }
|
|
|
|
dot1agCfmMepDbManAddressType OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management Address subtype of the bridge transmitting the
|
|
CCM.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:h and 21.5.3.5"
|
|
::= { dot1agCfmMepDbEntry 10 }
|
|
|
|
dot1agCfmMepDbManAddress OBJECT-TYPE
|
|
SYNTAX LldpManAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management Address information of the bridge transmitting
|
|
the CCM.
|
|
|
|
Some limitation to the size of the TLVs carrying a Manaement
|
|
Address is needed, as there is no bound on the lengths of
|
|
AddressFamilyNumbers. 31 octets, the maximum length of
|
|
LldpManAddress, is long enough for currently deployed
|
|
systems. This MIB module assumes that SNMP (IETF STD 62) is
|
|
used along with the Management Address to access the
|
|
management database.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:h and 21.5.3.5"
|
|
::= { dot1agCfmMepDbEntry 11 }
|
|
|
|
-- ******************************************************************
|
|
-- NOTIFICATIONS (TRAPS)
|
|
-- These notifications will be sent to the management entity
|
|
-- whenever a MEP loses/restores contact with one or more other MEPs.
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmFaultAlarm NOTIFICATION-TYPE
|
|
OBJECTS { dot1agCfmMepHighestPrDefect
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A MEP has a persistent defect condition. A notification
|
|
(fault alarm) is sent to the management entity with the OID
|
|
of the MEP that has detected the fault.
|
|
|
|
Whenever a MEP has a persistent defect,
|
|
it may or may not generate a Fault Alarm to warn the system
|
|
administrator of the problem, as controlled by the MEP
|
|
Fault Notification Generator State Machine and associated
|
|
Managed Objects. Only the highest-priority defect, as shown
|
|
in Table 20-1, is reported in the Fault Alarm.
|
|
|
|
The management entity receiving the notification can identify
|
|
the system from the network source address of the
|
|
notification, and can identify the MEP reporting the defect
|
|
by the indices in the OID of the dot1agCfmMepHighestPrDefect
|
|
variable in the notification.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clause 12.14.7.7"
|
|
::= { dot1agNotifications 1 }
|
|
|
|
-- ******************************************************************
|
|
-- IEEE 802.1ag MIB Module - Conformance Information
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmConformance OBJECT IDENTIFIER ::= { ieee8021cfmMIB 2 }
|
|
dot1agCfmCompliances OBJECT IDENTIFIER ::= { dot1agCfmConformance 1 }
|
|
dot1agCfmGroups OBJECT IDENTIFIER ::= { dot1agCfmConformance 2 }
|
|
|
|
-- ******************************************************************
|
|
-- Units of conformance
|
|
-- ******************************************************************
|
|
dot1agCfmStackGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmStackMepId,
|
|
dot1agCfmStackMacAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Stack group."
|
|
::= { dot1agCfmGroups 1 }
|
|
|
|
dot1agCfmDefaultMdLevelGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmDefaultMdLevelMhfCreation,
|
|
dot1agCfmDefaultMdLevelLevel,
|
|
dot1agCfmDefaultMdLevelVid
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Default MD Level group."
|
|
::= { dot1agCfmGroups 2 }
|
|
|
|
dot1agCfmConfigErrorListGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmConfigErrorListErrorType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Cfm Configuration Error List Group."
|
|
::= {dot1agCfmGroups 3}
|
|
|
|
dot1agCfmMdGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmMdTableNextIndex,
|
|
dot1agCfmMdName,
|
|
dot1agCfmMdFormat,
|
|
dot1agCfmMdLevel,
|
|
dot1agCfmMdMhfCreation,
|
|
dot1agCfmMdFaultAlarmDestDomain,
|
|
dot1agCfmMdFaulAlarmDestAddress,
|
|
dot1agCfmMdRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Maintenance Domain Group."
|
|
::={dot1agCfmGroups 4}
|
|
|
|
dot1agCfmMaGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmMaTableNextIndex,
|
|
dot1agCfmMaName,
|
|
dot1agCfmMaFormat,
|
|
dot1agCfmMaMhfCreation,
|
|
dot1agCfmMaCcmInterval,
|
|
dot1agCfmMaRowStatus,
|
|
dot1agCfmMaVlanRowStatus,
|
|
dot1agCfmMaFaultAlarmDestDomain,
|
|
dot1agCfmMaFaulAlarmDestAddress,
|
|
dot1agCfmMaMoreThanOneVid,
|
|
dot1agCfmMaMepListRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the MA group."
|
|
::= { dot1agCfmGroups 5}
|
|
|
|
dot1agCfmMepGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmMepIfIndex,
|
|
dot1agCfmMepDirection,
|
|
dot1agCfmMepPrimaryVid,
|
|
dot1agCfmMepActive,
|
|
dot1agCfmMepFngState,
|
|
dot1agCfmMepCciEnabled,
|
|
dot1agCfmMepCcmLtmPriority,
|
|
dot1agCfmMepMacAddress,
|
|
dot1agCfmMepFaultAlarmDestDomain,
|
|
dot1agCfmMepFaulAlarmDestAddress,
|
|
dot1agCfmMepLowPrDef,
|
|
dot1agCfmMepFngAlarmTime,
|
|
dot1agCfmMepFngResetTime,
|
|
dot1agCfmMepHighestPrDefect,
|
|
dot1agCfmMepSomeRdiDefect,
|
|
dot1agCfmMepErrMacStatus,
|
|
dot1agCfmMepSomeRMepCcmDefect,
|
|
dot1agCfmMepErrorCcmDefect,
|
|
dot1agCfmMepXconCcmDefect,
|
|
dot1agCfmMepErrorCcmLastFailure,
|
|
dot1agCfmMepXconCcmLastFailure,
|
|
dot1agCfmMepRCcmSequenceErrors,
|
|
dot1agCfmMepCciSentCcms,
|
|
dot1agCfmMepNextLbmTransId,
|
|
dot1agCfmMepLbrIn,
|
|
dot1agCfmMepLbrInOutOfOrder,
|
|
dot1agCfmMepLbrBadMsdu,
|
|
dot1agCfmMepLtmNextSeqNumber,
|
|
dot1agCfmMepUnexpLtrIn,
|
|
dot1agCfmMepLbrOut,
|
|
dot1agCfmMepTransmitLbmStatus,
|
|
dot1agCfmMepTransmitLbmDestMacAddress,
|
|
dot1agCfmMepTransmitLbmDestMepId,
|
|
dot1agCfmMepTransmitLbmDestIsMepId,
|
|
dot1agCfmMepTransmitLbmMessages,
|
|
dot1agCfmMepTransmitLbmDataTlv,
|
|
dot1agCfmMepTransmitLbmVlanPriority,
|
|
dot1agCfmMepTransmitLbmVlanDropEnable,
|
|
dot1agCfmMepTransmitLbmResultOK,
|
|
dot1agCfmMepTransmitLbmSeqNumber,
|
|
dot1agCfmMepTransmitLtmStatus,
|
|
dot1agCfmMepTransmitLtmFlags,
|
|
dot1agCfmMepTransmitLtmTargetMacAddress,
|
|
dot1agCfmMepTransmitLtmTargetMepId,
|
|
dot1agCfmMepTransmitLtmTargetIsMepId,
|
|
dot1agCfmMepTransmitLtmTtl,
|
|
dot1agCfmMepTransmitLtmResult,
|
|
dot1agCfmMepTransmitLtmSeqNumber,
|
|
dot1agCfmMepTransmitLtmEgressIdentifier,
|
|
dot1agCfmMepRowStatus,
|
|
dot1agCfmLtrForwarded,
|
|
dot1agCfmLtrRelay,
|
|
dot1agCfmLtrChassisIdSubtype,
|
|
dot1agCfmLtrChassisId,
|
|
dot1agCfmLtrManAddress,
|
|
dot1agCfmLtrManAddressType,
|
|
dot1agCfmLtrIngress,
|
|
dot1agCfmLtrIngressMac,
|
|
dot1agCfmLtrIngressPortIdSubtype,
|
|
dot1agCfmLtrIngressPortId,
|
|
dot1agCfmLtrEgress,
|
|
dot1agCfmLtrEgressMac,
|
|
dot1agCfmLtrEgressPortIdSubtype,
|
|
dot1agCfmLtrEgressPortId,
|
|
dot1agCfmLtrTerminalMep,
|
|
dot1agCfmLtrLastEgressIdentifier,
|
|
dot1agCfmLtrNextEgressIdentifier,
|
|
dot1agCfmLtrTtl,
|
|
dot1agCfmLtrOrganizationSpecificTlv
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the MEP group."
|
|
::= { dot1agCfmGroups 6 }
|
|
|
|
dot1agCfmMepDbGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1agCfmMepDbRMepState,
|
|
dot1agCfmMepDbRMepFailedOkTime,
|
|
dot1agCfmMepDbMacAddress,
|
|
dot1agCfmMepDbRdi,
|
|
dot1agCfmMepDbPortStatusTlv,
|
|
dot1agCfmMepDbInterfaceStatusTlv,
|
|
dot1agCfmMepDbChassisIdSubtype,
|
|
dot1agCfmMepDbChassisId,
|
|
dot1agCfmMepDbManAddress,
|
|
dot1agCfmMepDbManAddressType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the MEP group."
|
|
::= { dot1agCfmGroups 7 }
|
|
|
|
dot1agCfmNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
dot1agCfmFaultAlarm
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Notifications group."
|
|
::= { dot1agCfmGroups 8 }
|
|
|
|
-- ******************************************************************
|
|
-- MIB Module Compliance statements
|
|
-- ******************************************************************
|
|
|
|
dot1agCfmCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the CFM MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
dot1agCfmStackGroup,
|
|
dot1agCfmDefaultMdLevelGroup,
|
|
dot1agCfmConfigErrorListGroup,
|
|
dot1agCfmMdGroup,
|
|
dot1agCfmMaGroup,
|
|
dot1agCfmMepGroup,
|
|
dot1agCfmMepDbGroup,
|
|
dot1agCfmNotificationsGroup
|
|
}
|
|
|
|
OBJECT dot1agCfmMdRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4),
|
|
destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT dot1agCfmMaRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4),
|
|
destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT dot1agCfmMaVlanRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4),
|
|
destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT dot1agCfmMaMepListRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4),
|
|
destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT dot1agCfmMepRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4),
|
|
destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
::= { dot1agCfmCompliances 1 }
|
|
|
|
END
|