Graham McIntire
b4f8b40b7f
- Remove PVC volume mount from k8s/deployment.yaml - Delete k8s/mib-pvc.yaml (no longer needed) - Update .gitignore to commit MIB files to git - Add mix import_mibs task to copy MIBs from LibreNMS - Add all MIB files from priv/mibs/ to git This fixes the multi-attach volume error in Kubernetes where new pods couldn't start because the RWO (ReadWriteOnce) PVC was attached to the old pod. MIBs are now part of the Docker image and can be used by all pods simultaneously.
728 lines
31 KiB
Text
728 lines
31 KiB
Text
ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
transmission
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
adsl2TCMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200610040000Z"
|
|
ORGANIZATION "ADSLMIB Working Group"
|
|
CONTACT-INFO
|
|
"WG-email: adslmib@ietf.org
|
|
Info: https://www1.ietf.org/mailman/listinfo/adslmib
|
|
|
|
Chair: Mike Sneed
|
|
Sand Channel Systems
|
|
Postal: P.O. Box 37324
|
|
Raleigh NC 27627-732
|
|
Email: sneedmike@hotmail.com
|
|
Phone: +1 206 600 7022
|
|
|
|
Co-Chair & Co-editor:
|
|
Menachem Dodge
|
|
ECI Telecom Ltd.
|
|
Postal: 30 Hasivim St.
|
|
Petach Tikva 49517,
|
|
Israel.
|
|
Email: mbdodge@ieee.org
|
|
Phone: +972 3 926 8421
|
|
Co-editor: Moti Morgenstern
|
|
ECI Telecom Ltd.
|
|
Postal: 30 Hasivim St.
|
|
Petach Tikva 49517,
|
|
Israel.
|
|
Email: moti.morgenstern@ecitele.com
|
|
Phone: +972 3 926 6258
|
|
|
|
Co-editor: Scott Baillie
|
|
NEC Australia
|
|
Postal: 649-655 Springvale Road,
|
|
Mulgrave, Victoria 3170,
|
|
Australia.
|
|
Email: scott.baillie@nec.com.au
|
|
Phone: +61 3 9264 3986
|
|
|
|
Co-editor: Umberto Bonollo
|
|
NEC Australia
|
|
Postal: 649-655 Springvale Road,
|
|
Mulgrave, Victoria 3170,
|
|
Australia.
|
|
Email: umberto.bonollo@nec.com.au
|
|
Phone: +61 3 9264 3385"
|
|
DESCRIPTION
|
|
"This MIB Module provides Textual Conventions to be
|
|
used by the ADSL2-LINE-MIB module for the purpose of
|
|
managing ADSL, ADSL2, and ADSL2+ lines.
|
|
|
|
Copyright (C) The Internet Society (2006). This version of
|
|
this MIB module is part of RFC 4706: see the RFC itself for
|
|
full legal notices."
|
|
REVISION "200610040000Z"
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 4706."
|
|
::= { transmission 238 2 }
|
|
|
|
|
|
|
|
-- adsl2MIB 2
|
|
--
|
|
-- ----------------------------------------------
|
|
-- Textual Conventions --
|
|
-- ----------------------------------------------
|
|
|
|
Adsl2Unit ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a transceiver as being either an ATU-C or
|
|
an ATU-R. An ADSL line consists of two transceivers, an ATU-C
|
|
and an ATU-R. Attributes with this syntax reference the two
|
|
sides of a line. Specified as an INTEGER, the two values
|
|
are:
|
|
|
|
atuc(1) -- Central office ADSL terminal unit (ATU-C).
|
|
atur(2) -- Remote ADSL terminal unit (ATU-R)."
|
|
SYNTAX INTEGER {
|
|
atuc(1),
|
|
atur(2)
|
|
}
|
|
|
|
Adsl2Direction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the direction of a band as being
|
|
either upstream or downstream. Specified as an INTEGER,
|
|
the two values are:
|
|
upstream(1), and
|
|
downstream(2)."
|
|
SYNTAX INTEGER {
|
|
upstream(1),
|
|
downstream(2)
|
|
}
|
|
|
|
Adsl2TransmissionModeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of ADSL2 line transmission modes, with one bit
|
|
per mode. The notes (F) and (L) denote Full-Rate
|
|
and Lite/splitterless, respectively:
|
|
Bit 00 : Regional Std. (ANSI T1.413) (F)
|
|
Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
|
|
Bit 02 : G.992.1 POTS non-overlapped (F)
|
|
Bit 03 : G.992.1 POTS overlapped (F)
|
|
Bit 04 : G.992.1 ISDN non-overlapped (F)
|
|
Bit 05 : G.992.1 ISDN overlapped (F)
|
|
Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
|
|
Bit 07 : G.992.1 TCM-ISDN overlapped (F)
|
|
Bit 08 : G.992.2 POTS non-overlapped (L)
|
|
Bit 09 : G.992.2 POTS overlapped (L)
|
|
Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
|
|
Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
|
|
Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1
|
|
Bit 13-17: Reserved
|
|
Bit 18 : G.992.3 POTS non-overlapped (F)
|
|
Bit 19 : G.992.3 POTS overlapped (F)
|
|
Bit 20 : G.992.3 ISDN non-overlapped (F)
|
|
Bit 21 : G.992.3 ISDN overlapped (F)
|
|
Bit 22-23: Reserved
|
|
Bit 24 : G.992.4 POTS non-overlapped (L)
|
|
Bit 25 : G.992.4 POTS overlapped (L)
|
|
Bit 26-27: Reserved
|
|
Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
|
|
Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
|
|
Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
|
|
Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
|
|
Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
|
|
Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
|
|
Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
|
|
wide U/S (F)
|
|
Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
|
|
narrow U/S(F)
|
|
Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
|
|
wide U/S (F)
|
|
Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
|
|
narrow U/S (F)
|
|
Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
|
|
Bit 39 : G.992.3 Annex M POTS overlapped (F)
|
|
Bit 40 : G.992.5 POTS non-overlapped (F)
|
|
Bit 41 : G.992.5 POTS overlapped (F)
|
|
Bit 42 : G.992.5 ISDN non-overlapped (F)
|
|
Bit 43 : G.992.5 ISDN overlapped (F)
|
|
Bit 44-45: Reserved
|
|
Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
|
|
Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
|
|
Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
|
|
Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
|
|
Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
|
|
Bit 51 : G.992.5 Annex M POTS overlapped (F)
|
|
Bit 52-55: Reserved"
|
|
SYNTAX BITS {
|
|
ansit1413(0),
|
|
etsi(1),
|
|
g9921PotsNonOverlapped(2),
|
|
g9921PotsOverlapped(3),
|
|
g9921IsdnNonOverlapped(4),
|
|
g9921isdnOverlapped(5),
|
|
g9921tcmIsdnNonOverlapped(6),
|
|
g9921tcmIsdnOverlapped(7),
|
|
g9922potsNonOverlapped(8),
|
|
g9922potsOverlapped(9),
|
|
g9922tcmIsdnNonOverlapped(10),
|
|
g9922tcmIsdnOverlapped(11),
|
|
g9921tcmIsdnSymmetric(12),
|
|
reserved1(13),
|
|
reserved2(14),
|
|
reserved3(15),
|
|
reserved4(16),
|
|
reserved5(17),
|
|
g9923PotsNonOverlapped(18),
|
|
g9923PotsOverlapped(19),
|
|
g9923IsdnNonOverlapped(20),
|
|
g9923isdnOverlapped(21),
|
|
reserved6(22),
|
|
reserved7(23),
|
|
g9924potsNonOverlapped(24),
|
|
g9924potsOverlapped(25),
|
|
reserved8(26),
|
|
reserved9(27),
|
|
g9923AnnexIAllDigNonOverlapped(28),
|
|
g9923AnnexIAllDigOverlapped(29),
|
|
g9923AnnexJAllDigNonOverlapped(30),
|
|
g9923AnnexJAllDigOverlapped(31),
|
|
g9924AnnexIAllDigNonOverlapped(32),
|
|
g9924AnnexIAllDigOverlapped(33),
|
|
g9923AnnexLMode1NonOverlapped(34),
|
|
g9923AnnexLMode2NonOverlapped(35),
|
|
g9923AnnexLMode3Overlapped(36),
|
|
g9923AnnexLMode4Overlapped(37),
|
|
g9923AnnexMPotsNonOverlapped(38),
|
|
g9923AnnexMPotsOverlapped(39),
|
|
g9925PotsNonOverlapped(40),
|
|
g9925PotsOverlapped(41),
|
|
g9925IsdnNonOverlapped(42),
|
|
g9925isdnOverlapped(43),
|
|
reserved10(44),
|
|
reserved11(45),
|
|
g9925AnnexIAllDigNonOverlapped(46),
|
|
g9925AnnexIAllDigOverlapped(47),
|
|
g9925AnnexJAllDigNonOverlapped(48),
|
|
g9925AnnexJAllDigOverlapped(49),
|
|
g9925AnnexMPotsNonOverlapped(50),
|
|
g9925AnnexMPotsOverlapped(51),
|
|
reserved12(52),
|
|
reserved13(53),
|
|
reserved14(54),
|
|
reserved15(55)
|
|
}
|
|
|
|
Adsl2RaMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the rate adaptation behavior for the line.
|
|
The three possible behaviors are:
|
|
manual(1) - No Rate-Adaptation. The initialization
|
|
process attempts to synchronize to a
|
|
specified rate.
|
|
raInit(2) - Rate-Adaptation during initialization process
|
|
only, which attempts to synchronize to a rate
|
|
between minimum and maximum specified values.
|
|
dynamicRa(3) - Dynamic Rate-Adaptation during initialization
|
|
process as well as during SHOWTIME."
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
raInit(2),
|
|
dynamicRa(3)
|
|
}
|
|
|
|
Adsl2InitResult ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the result of a full initialization attempt; the
|
|
six possible result values are:
|
|
noFail(0) - Successful initialization.
|
|
configError(1) - Configuration failure.
|
|
configNotFeasible(2) - Configuration details not supported.
|
|
commFail(3) - Communication failure.
|
|
noPeerAtu(4) - Peer ATU not detected.
|
|
otherCause(5) - Other initialization failure reason.
|
|
|
|
The values used are as defined in ITU-T G.997.1,
|
|
paragraph 7.5.1.3"
|
|
SYNTAX INTEGER {
|
|
noFail(0),
|
|
configError(1),
|
|
configNotFeasible(2),
|
|
commFail(3),
|
|
noPeerAtu(4),
|
|
otherCause(5)
|
|
}
|
|
|
|
Adsl2OperationModes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ADSL2 management model specified includes an ADSL Mode
|
|
attribute that identifies an instance of ADSL Mode-Specific
|
|
PSD Configuration object in the ADSL Line Profile. The
|
|
following classes of ADSL operating mode are defined.
|
|
The notes (F) and (L) denote Full-Rate and Lite/splitterless
|
|
respectively:
|
|
|
|
+-------+--------------------------------------------------+
|
|
| Value | ADSL operation mode description |
|
|
+-------+--------------------------------------------------+
|
|
|
|
1 - The default/generic PSD configuration. Default
|
|
configuration will be used when no other matching
|
|
mode-specific configuration can be found.
|
|
2 - ADSL family. The attributes included in the Mode-
|
|
Specific PSD Configuration are irrelevant for
|
|
ITU-T G.992.1 and G.992.2 ADSL modes. Hence, it
|
|
is possible to map those modes to this generic
|
|
class.
|
|
3-7 - Unused. Reserved for future ITU-T specification.
|
|
8 - G.992.3 POTS non-overlapped (F)
|
|
9 - G.992.3 POTS overlapped (F)
|
|
10 - G.992.3 ISDN non-overlapped (F)
|
|
11 - G.992.3 ISDN overlapped (F)
|
|
12-13 - Unused. Reserved for future ITU-T specification.
|
|
14 - G.992.4 POTS non-overlapped (L)
|
|
15 - G.992.4 POTS overlapped (L)
|
|
16-17 - Unused. Reserved for future ITU-T specification.
|
|
18 - G.992.3 Annex I All-Digital non-overlapped (F)
|
|
19 - G.992.3 Annex I All-Digital overlapped (F)
|
|
20 - G.992.3 Annex J All-Digital non-overlapped (F)
|
|
21 - G.992.3 Annex J All-Digital overlapped (F)
|
|
22 - G.992.4 Annex I All-Digital non-overlapped (L)
|
|
23 - G.992.4 Annex I All-Digital overlapped (L)
|
|
24 - G.992.3 Annex L POTS non-overlapped, mode 1,
|
|
wide U/S (F)
|
|
25 - G.992.3 Annex L POTS non-overlapped, mode 2,
|
|
narrow U/S(F)
|
|
26 - G.992.3 Annex L POTS overlapped, mode 3,
|
|
wide U/S (F)
|
|
27 - G.992.3 Annex L POTS overlapped, mode 4,
|
|
narrow U/S (F)
|
|
28 - G.992.3 Annex M POTS non-overlapped (F)
|
|
29 - G.992.3 Annex M POTS overlapped (F)
|
|
30 - G.992.5 POTS non-overlapped (F)
|
|
31 - G.992.5 POTS overlapped (F)
|
|
32 - G.992.5 ISDN non-overlapped (F)
|
|
33 - G.992.5 ISDN overlapped (F)
|
|
34-35 - Unused. Reserved for future ITU-T specification.
|
|
36 - G.992.5 Annex I All-Digital non-overlapped (F)
|
|
37 - G.992.5 Annex I All-Digital overlapped (F)
|
|
38 - G.992.5 Annex J All-Digital non-overlapped (F)
|
|
39 - G.992.5 Annex J All-Digital overlapped (F)
|
|
40 - G.992.5 Annex M POTS non-overlapped (F)
|
|
41 - G.992.5 Annex M POTS overlapped (F)"
|
|
SYNTAX INTEGER {
|
|
defMode(1),
|
|
adsl(2),
|
|
g9923PotsNonOverlapped(8),
|
|
g9923PotsOverlapped(9),
|
|
g9923IsdnNonOverlapped(10),
|
|
g9923isdnOverlapped(11),
|
|
g9924potsNonOverlapped(14),
|
|
g9924potsOverlapped(15),
|
|
g9923AnnexIAllDigNonOverlapped(18),
|
|
g9923AnnexIAllDigOverlapped(19),
|
|
g9923AnnexJAllDigNonOverlapped(20),
|
|
g9923AnnexJAllDigOverlapped(21),
|
|
g9924AnnexIAllDigNonOverlapped(22),
|
|
g9924AnnexIAllDigOverlapped(23),
|
|
g9923AnnexLMode1NonOverlapped(24),
|
|
g9923AnnexLMode2NonOverlapped(25),
|
|
g9923AnnexLMode3Overlapped(26),
|
|
g9923AnnexLMode4Overlapped(27),
|
|
g9923AnnexMPotsNonOverlapped(28),
|
|
g9923AnnexMPotsOverlapped(29),
|
|
g9925PotsNonOverlapped(30),
|
|
g9925PotsOverlapped(31),
|
|
g9925IsdnNonOverlapped(32),
|
|
g9925isdnOverlapped(33),
|
|
g9925AnnexIAllDigNonOverlapped(36),
|
|
g9925AnnexIAllDigOverlapped(37),
|
|
g9925AnnexJAllDigNonOverlapped(38),
|
|
g9925AnnexJAllDigOverlapped(39),
|
|
g9925AnnexMPotsNonOverlapped(40),
|
|
g9925AnnexMPotsOverlapped(41)
|
|
}
|
|
|
|
Adsl2PowerMngState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax uniquely identify each power
|
|
management state defined for the ADSL/ADSL2 or ADSL2+ link.
|
|
The possible values are:
|
|
l0(1) - L0 - Full power management state.
|
|
l1(2) - L1 - Low power management state (for G.992.2).
|
|
l2(3) - L2 - Low power management state (for G.992.3,
|
|
G.992.4, and G.992.5).
|
|
l3(4) - L3 - Idle power management state."
|
|
SYNTAX INTEGER {
|
|
l0(1),
|
|
l1(2),
|
|
l2(3),
|
|
l3(4)
|
|
}
|
|
|
|
Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are configuration parameters
|
|
that reference the desired power management state for the
|
|
ADSL/ADSL2 or ADSL2+ link:
|
|
l3toL0(0) - Perform a transition from L3 to L0
|
|
(Full power management state).
|
|
l0toL2(2) - Perform a transition from L0 to L2
|
|
(Low power management state).
|
|
l0orL2toL3(3) - Perform a transition into L3 (Idle
|
|
power management state).
|
|
|
|
The values used are as defined in ITU-T G.997.1,
|
|
paragraph 7.3.1.1.3"
|
|
SYNTAX INTEGER {
|
|
l3toL0(0),
|
|
l0toL2(2),
|
|
l0orL2toL3(3)
|
|
}
|
|
|
|
Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are configuration parameters
|
|
that reference the power modes/states into which the ATU-C or
|
|
ATU-R may autonomously transit.
|
|
|
|
It is a BITS structure that allows control of the following
|
|
transit options:
|
|
allowTransitionsToIdle(0) - XTU may autonomously transit
|
|
to idle (L3) state.
|
|
allowTransitionsToLowPower(1) - XTU may autonomously transit
|
|
to low-power (L2) state."
|
|
SYNTAX BITS {
|
|
allowTransitionsToIdle(0),
|
|
allowTransitionsToLowPower(1)
|
|
}
|
|
|
|
Adsl2LineLdsf ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are configuration parameters
|
|
that control the Loop Diagnostic mode for the ADSL/ADSL2 or
|
|
ADSL2+ link. The possible values are:
|
|
inhibit(0) - Inhibit Loop Diagnostic mode.
|
|
force(1) - Force/Initiate Loop Diagnostic mode.
|
|
|
|
The values used are as defined in ITU-T G.997.1,
|
|
paragraph 7.3.1.1.8"
|
|
SYNTAX INTEGER {
|
|
inhibit(0),
|
|
force(1)
|
|
}
|
|
|
|
Adsl2LdsfResult ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible failure reasons associated with performing
|
|
a Dual Ended Loop Test (DELT) on a DSL line.
|
|
Possible values are:
|
|
none(1) - The default value in case LDSF was never
|
|
requested for the associated line.
|
|
success(2) - The recent command completed
|
|
successfully.
|
|
inProgress(3) - The Loop Diagnostics process is in
|
|
progress.
|
|
unsupported(4) - The NE or the line card doesn't support
|
|
LDSF.
|
|
cannotRun(5) - The NE cannot initiate the command, due
|
|
to a nonspecific reason.
|
|
aborted(6) - The Loop Diagnostics process aborted.
|
|
failed(7) - The Loop Diagnostics process failed.
|
|
illegalMode(8) - The NE cannot initiate the command, due
|
|
to the specific mode of the relevant
|
|
line.
|
|
adminUp(9) - The NE cannot initiate the command, as
|
|
the relevant line is administratively
|
|
'Up'.
|
|
tableFull(10) - The NE cannot initiate the command, due
|
|
to reaching the maximum number of rows
|
|
in the results table.
|
|
noResources(11) - The NE cannot initiate the command, due
|
|
to lack of internal memory resources."
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
success(2),
|
|
inProgress(3),
|
|
unsupported(4),
|
|
cannotRun(5),
|
|
aborted(6),
|
|
failed(7),
|
|
illegalMode(8),
|
|
adminUp(9),
|
|
tableFull(10),
|
|
noResources(11)
|
|
}
|
|
|
|
Adsl2SymbolProtection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are configuration parameters
|
|
that reference the minimum-length impulse noise protection
|
|
(INP) in terms of number of symbols. The possible values are:
|
|
noProtection (i.e., INP not required), halfSymbol (i.e., INP
|
|
length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol."
|
|
SYNTAX INTEGER {
|
|
noProtection(1),
|
|
halfSymbol(2),
|
|
singleSymbol(3),
|
|
twoSymbols(4),
|
|
threeSymbols(5),
|
|
fourSymbols(6),
|
|
fiveSymbols(7),
|
|
sixSymbols(8),
|
|
sevenSymbols(9),
|
|
eightSymbols(10),
|
|
nineSymbols(11),
|
|
tenSymbols(12),
|
|
elevenSymbols(13),
|
|
twelveSymbols(14),
|
|
thirteeSymbols(15),
|
|
fourteenSymbols(16),
|
|
fifteenSymbols(17),
|
|
sixteenSymbols(18)
|
|
}
|
|
|
|
Adsl2MaxBer ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are configuration parameters
|
|
that reference the maximum Bit Error Rate (BER).
|
|
The possible values are:
|
|
|
|
eminus3(1) - Maximum BER=E^-3
|
|
eminus5(2) - Maximum BER=E^-5
|
|
eminus7(3) - Maximum BER=E^-7"
|
|
SYNTAX INTEGER {
|
|
eminus3(1),
|
|
eminus5(2),
|
|
eminus7(3)
|
|
}
|
|
|
|
Adsl2ScMaskDs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each one of the 512 bits in this OCTET
|
|
STRING array represents the corresponding bin
|
|
in the downstream direction. A value of one
|
|
indicates that the bin is not in use."
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
|
|
Adsl2ScMaskUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each one of the 64 bits in this OCTET
|
|
STRING array represents the corresponding bin
|
|
in the upstream direction. A value of one
|
|
indicates that the bin is not in use."
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
|
|
Adsl2RfiDs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each one of the 512 bits in this OCTET
|
|
STRING array represents the corresponding bin
|
|
in the downstream direction. A value of one
|
|
indicates that the bin is part of a notch
|
|
filter."
|
|
SYNTAX OCTET STRING (SIZE (0..64))
|
|
|
|
Adsl2PsdMaskDs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to
|
|
32 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets: The first
|
|
two octets hold the index of the sub-carrier
|
|
associated with the breakpoint. The third octet
|
|
holds the PSD reduction at the breakpoint from 0
|
|
(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
|
|
0.5 dBm/Hz."
|
|
SYNTAX OCTET STRING (SIZE (0..96))
|
|
|
|
Adsl2PsdMaskUs ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to
|
|
4 PSD Mask breakpoints.
|
|
Each breakpoint occupies 3 octets: The first
|
|
two octets hold the index of the sub-carrier
|
|
associated with the breakpoint. The third octet
|
|
holds the PSD reduction at the breakpoint from 0
|
|
(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
|
|
0.5 dBm/Hz."
|
|
SYNTAX OCTET STRING (SIZE (0..12))
|
|
|
|
Adsl2Tssi ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a structure that represents up to
|
|
32 transmit spectrum shaping (TSSi) breakpoints.
|
|
Each breakpoint occupies 3 octets: The first
|
|
two octets hold the index of the sub-carrier
|
|
associated with the breakpoint. The third octet
|
|
holds the shaping parameter at the breakpoint. It
|
|
is a value from 0 to 127 (units of -0.5 dB). The
|
|
special value 127 indicates that the sub-carrier
|
|
is not transmitted."
|
|
SYNTAX OCTET STRING (SIZE (0..96))
|
|
|
|
Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter represents the last successfully
|
|
transmitted initialization state in the last full
|
|
initialization performed on the line. States are
|
|
per the specific xDSL technology and are numbered
|
|
from 0 (if G.994.1 is used) or 1 (if G.994.1 is
|
|
not used) up to Showtime."
|
|
SYNTAX INTEGER {
|
|
atucG9941(0),
|
|
atucQuiet1(1),
|
|
atucComb1(2),
|
|
atucQuiet2(3),
|
|
atucComb2(4),
|
|
atucIcomb1(5),
|
|
atucLineprob(6),
|
|
atucQuiet3(7),
|
|
atucComb3(8),
|
|
atucIComb2(9),
|
|
atucMsgfmt(10),
|
|
atucMsgpcb(11),
|
|
atucQuiet4(12),
|
|
atucReverb1(13),
|
|
atucTref1(14),
|
|
atucReverb2(15),
|
|
atucEct(16),
|
|
atucReverb3(17),
|
|
atucTref2(18),
|
|
atucReverb4(19),
|
|
atucSegue1(20),
|
|
atucMsg1(21),
|
|
atucReverb5(22),
|
|
atucSegue2(23),
|
|
atucMedley(24),
|
|
atucExchmarker(25),
|
|
atucMsg2(26),
|
|
atucReverb6(27),
|
|
atucSegue3(28),
|
|
atucParams(29),
|
|
atucReverb7(30),
|
|
atucSegue4(31),
|
|
atucShowtime(32),
|
|
aturG9941(100),
|
|
aturQuiet1(101),
|
|
aturComb1(102),
|
|
aturQuiet2(103),
|
|
aturComb2(104),
|
|
aturIcomb1(105),
|
|
aturLineprob(106),
|
|
aturQuiet3(107),
|
|
aturComb3(108),
|
|
aturIcomb2(109),
|
|
aturMsgfmt(110),
|
|
aturMsgpcb(111),
|
|
aturReverb1(112),
|
|
aturQuiet4(113),
|
|
aturReverb2(114),
|
|
aturQuiet5(115),
|
|
aturReverb3(116),
|
|
aturEct(117),
|
|
aturReverb4(118),
|
|
aturSegue1(119),
|
|
aturReverb5(120),
|
|
aturSegue2(121),
|
|
aturMsg1(122),
|
|
aturMedley(123),
|
|
aturExchmarker(124),
|
|
aturMsg2(125),
|
|
aturReverb6(126),
|
|
aturSegue3(127),
|
|
aturParams(128),
|
|
aturReverb7(129),
|
|
aturSegue4(130),
|
|
aturShowtime(131)
|
|
}
|
|
|
|
Adsl2LineStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are status parameters
|
|
that reflect the failure status for a given endpoint of
|
|
ADSL/ADSL2 or ADSL2+ link.
|
|
|
|
This BITS structure can report the following failures:
|
|
|
|
noDefect(0) - This bit position positively reports
|
|
that no defect or failure exists.
|
|
lossOfFrame(1) - Loss of frame synchronization.
|
|
lossOfSignal(2) - Loss of signal.
|
|
lossOfPower(3) - Loss of power. Usually this failure may
|
|
be reported for ATU-Rs only.
|
|
initFailure(4) - Recent initialization process failed.
|
|
Never active on ATU-R."
|
|
SYNTAX BITS {
|
|
noDefect(0),
|
|
lossOfFrame(1),
|
|
lossOfSignal(2),
|
|
lossOfPower(3),
|
|
initFailure(4)
|
|
}
|
|
|
|
Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are status parameters that
|
|
reflect the failure status for Transmission Convergence (TC)
|
|
layer of a given ATM interface (data path over an ADSL/ADSL2
|
|
or ADSL2+ link).
|
|
|
|
This BITS structure can report the following failures:
|
|
noDefect(0) - This bit position positively
|
|
reports that no defect or failure
|
|
exists.
|
|
noCellDelineation(1) - The link was successfully
|
|
initialized, but cell delineation
|
|
was never acquired on the
|
|
associated ATM data path.
|
|
lossOfCellDelineation(2) - Loss of cell delineation on the
|
|
associated ATM data path."
|
|
SYNTAX BITS {
|
|
noDefect(0),
|
|
noCellDelineation(1),
|
|
lossOfCellDelineation(2)
|
|
}
|
|
|
|
Adsl2ChPtmStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Attributes with this syntax are status parameters that
|
|
reflect the failure status for a given PTM interface (packet
|
|
data path over an ADSL/ADSL2 or ADSL2+ link).
|
|
|
|
This BITS structure can report the following failures:
|
|
noDefect(0) - This bit position positively
|
|
reports that no defect or failure exists.
|
|
outOfSync(1) - Out of synchronization."
|
|
SYNTAX BITS {
|
|
noDefect(0),
|
|
outOfSync(1)
|
|
}
|
|
|
|
END
|
|
|
|
|
|
|