Sets sensor_unit for all sensors that are missing it, fixing sensors
created before the discovery code was updated to set units properly.
Updates:
- Temperature sensors: set to '°C'
- Voltage sensors: set to 'V'
- Current sensors: set to 'mA'
- Power sensors: set to 'W'
- dBm sensors: set to 'dBm'
This ensures the device detail page displays units correctly for all
sensor types (e.g., "27 °C" instead of "27" for temperature).
The discovery code already sets these units for new sensors, so this
migration only affects existing data.
Related to:
- lib/towerops/snmp/profiles/vendors/routeros.ex:690 (°C)
- lib/towerops/snmp/profiles/vendors/routeros.ex:709 (V)
- lib/towerops/snmp/profiles/base.ex:1473-1480 (sensor_type_to_unit)
🤖 Generated with Claude Code
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Fixes voltage sensors that were incorrectly classified as temperature
sensors due to MikroTik devices reporting wrong mtxrGaugeUnit values.
Problem:
- Sensors with names like "psu1-voltage" and "psu2-voltage" were
classified as temperature sensors with divisor=1
- This caused voltage readings to display as 469V instead of 46.9V
- The RouterOS profile already has name-based override logic for new
discoveries, but existing sensors needed fixing
Solution:
- Migration identifies sensors by:
- OID pattern: 1.3.6.1.4.1.14988.1.1.3.100.1.3.%
- Type mismatch: sensor_type = 'temperature' but name contains 'voltage'
- Incorrect divisor: sensor_divisor = 1
- Updates sensor metadata: type, unit, divisor
- Corrects historical sensor_reading values by dividing by 10
Future discoveries are already protected by the name-based override
logic in lib/towerops/snmp/profiles/vendors/routeros.ex:620-630
🤖 Generated with Claude Code
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Mikrotik/RouterOS voltage sensors were showing incorrect values (469.0
instead of 46.9) because existing sensors in the database have
sensor_divisor=1 instead of the correct value of 10.
The RouterOS profile code was fixed in a previous commit to set
divisor=10 for new sensors, but existing sensors need to be updated.
Migration changes:
- Updates sensor_divisor from 1 to 10 for Mikrotik voltage sensors
- Identifies Mikrotik sensors by OID prefix: 1.3.6.1.4.1.14988.1.1.3.100.1.3
- Divides all historical sensor_reading values by 10 to correct the data
- Both up and down migrations included for full reversibility
After this migration:
- Voltage will show as 46.9V instead of 469.0V
- Historical graphs will show correct voltage values
Replaces etcd-based distributed locking with Oban's PostgreSQL-backed job queue.
This simplifies the architecture by eliminating the need for a separate etcd cluster
while providing better reliability and observability.
Changes:
- Add Oban dependency and migration (oban_jobs table)
- Create DevicePollerCoordinator and DeviceMonitorCoordinator Oban workers
- Remove EtcdCoordinator and EtcdLock modules
- Update application supervisor to start Oban
- Configure Oban with pollers (50 workers) and monitors (50 workers) queues
- Remove etcd StatefulSet from Kubernetes manifests
- Update monitoring supervisor documentation
Benefits:
- Simpler architecture (no etcd cluster to manage)
- PostgreSQL-based (uses existing database)
- Built-in uniqueness prevents duplicate jobs cluster-wide
- Better observability with Oban Web UI
- Automatic job rescue on node crashes
- Easier local development (no etcd required)
What was removed:
- etcd StatefulSet (3 pods)
- EtcdCoordinator module (320 lines)
- EtcdLock module (158 lines)
- eetcd dependency
All 3,686 tests passing.
- Create snmp_physical_entities table with migration
- Add PhysicalEntity schema with entity_class validation
- Support parent/child hierarchy via parent_entity_id
- Implement discover_physical_entities/1 in Base profile
- Discover chassis, modules, PSUs, fans from ENTITY-MIB
- Map entity class integers to string names
- Add 10 schema tests and 4 discovery tests
- Fix flaky AlertNotifier test with unique names and mailbox clearing
- Create snmp_ip_addresses table with migration
- Add IpAddress schema with ip_type validation (ipv4/ipv6)
- Add prefix_length validation based on ip_type
- Implement discover_ip_addresses/1 in Base profile
- Extract IP addresses from IP-MIB ipAdEntTable
- Support multiple IPs per interface with subnet masks
- Add 12 schema tests and 4 discovery tests
- Changed ping module to use microsecond timer resolution instead of millisecond
- Prevents 0ms readings for very fast pings (localhost, local network)
- Updated response_time_ms to float type to store decimal precision
- Migration converts existing integer values to float
Changes profile import endpoint to use standard API token authentication:
API Token Changes:
- Add user_id to api_tokens table (tracks who created the token)
- Update ApiTokens.verify_token/1 to return user along with org_id
- Update ApiAuth plug to assign current_user from token
Profile Import Changes:
- Move endpoint from /api/v1/admin/profiles/import to /api/v1/profiles/import
- Check user.is_superuser in controller instead of using RequireSuperuser plug
- Use api_v1 pipeline (Bearer token auth) instead of browser session
- Update documentation to show API token usage
Security:
- Only API tokens created by superusers can import profiles
- Returns 403 Forbidden if token user is not a superuser
- Logs import attempts with user email for audit trail
This provides a consistent API experience using Bearer tokens
instead of requiring browser session cookies.
Enhance dynamic profile to poll OS definitions from SNMP:
- Add serial_number field to snmp_devices table
- Update Dynamic profile to query profile_os_definitions
- Poll SNMP OIDs for version and serial fields
- Display actual firmware version instead of profile name
For ePMP devices, this will now query:
- CAMBIUM-PMP80211-MIB::cambiumCurrentuImageVersion.0 for firmware
- CAMBIUM-PMP80211-MIB::cambiumEPMPMSN.0 for serial number
The Operating System field will now show actual version like
'Cambium 4.7.1' instead of 'Cambium epmp'.
The Alert schema was updated to use :device_down and :device_up enum values,
but existing database records still had 'equipment_down' and 'equipment_up' values.
Added migration to update all existing alert records to use the new naming
convention.
Created API token system for programmatic access:
- API tokens table with organization scoping
- ApiTokens context for token management
- ApiAuth plug for Bearer token authentication
- Tokens shown once on creation, then hashed for security
Implemented RESTful API v1 endpoints:
- SitesController: CRUD operations for sites
- DevicesController: CRUD operations for devices
- All operations scoped to authenticated organization
- Proper authorization checks via site ownership
Technical details:
- Tokens prefixed with "towerops_" for easy identification
- SHA-256 hashing for token storage
- Last used timestamp tracking (async update)
- Optional token expiration support
- Standard JSON error responses (40x status codes)
Routes:
- /api/v1/sites (GET, POST, PATCH, DELETE)
- /api/v1/devices (GET, POST, PATCH, DELETE)
Authentication:
- Authorization: Bearer towerops_xxxxx header required
- Returns 401 for invalid/expired tokens
- Returns 403 for unauthorized resource access
- Make device name field optional when SNMP is enabled (ICMP Only mode still requires name)
- Add database migration to make name column nullable
- Add conditional validation: name required only when snmp_enabled is false
- Update SNMP discovery to populate device name from sysName when empty
- Add helper text explaining SNMP name population behavior in form
- Add comprehensive tests for device name SNMP population
- Update test mocks to account for NetSnmp profile sensor discovery
Implements a hierarchical SNMP community configuration system where settings
can be defined at the organization level (global default), overridden at the
site level, or overridden at the equipment level.
Changes:
- Migration: Add snmp_version and snmp_community to organizations and sites
- Organization schema: Add SNMP fields with default version "2c"
- Site schema: Add SNMP fields that override organization defaults
- Equipment context: Add get_snmp_config/1 with hierarchical fallback logic
- Discovery: Use Equipment.get_snmp_config instead of equipment.snmp_community
- PollerWorker: Use Equipment.get_snmp_config instead of equipment.snmp_community
The fallback order is:
1. Equipment-level (highest priority)
2. Site-level
3. Organization-level (default)
All 785 tests passing.
Removed 20260115010756_add_agent_query_composite_indexes.exs which
was a duplicate of 20260115010646_add_composite_indexes_for_agent_queries.exs.
Both had already run but the duplicate one used create_if_not_exists
so it didn't fail. Cleaned up to avoid confusion.
Extracted 5 shared helper functions into ToweropsWeb.AgentLive.Helpers:
- agent_status/1 - Determines online/warning/offline/never status
- status_badge_class/1 - Returns Tailwind CSS classes for status badges
- status_dot_class/1 - Returns CSS classes for animated status dots
- format_last_seen/1 - Formats DateTime as human-readable time ago
- format_uptime/1 - Formats uptime seconds as days/hours/minutes
Removed duplicate code from:
- lib/towerops_web/live/agent_live/index.ex
- lib/towerops_web/live/agent_live/show.ex
Both modules now import the shared helpers, following DRY principle.
This reduces code duplication and makes status formatting consistent
across all agent-related pages.
