Phase 1: Foundation Types (100% complete)
- query_helpers: SQL LIKE sanitization with pipe operators
- numeric: Integer parsing with pattern matching guards
- result: Pure Elixir Result monad (map, and_then, unwrap_or)
Phase 2: Ecto Domain Types (100% complete)
- ip_address: IPv4/IPv6 validation using :inet directly
- mac_address: Multi-format MAC parsing (colon/hyphen/dot/compact)
- snmp_oid: OID parsing/manipulation with recursive pattern matching
All 198 tests passing across converted modules.
API changed from Gleam-style {:some/:none to idiomatic {:ok/:error.
Refactored parse_numeric_oid to use with statement, reducing nesting depth.
Reviewed-on: graham/towerops-web#196
The wrap detection only applied the 2^32 correction when the previous
counter was in the upper half of the 32-bit range (> 2^31). On fast
links, counters wrap regardless of where in the range they sit. Three
graph rendering paths had no wrap detection at all, just max(0).
Consolidated all bps calculations into a single public
Capacity.calculate_bps/3 that always tries the 2^32 correction for
negative deltas. 64-bit HC counter resets remain clamped to zero since
the corrected delta stays negative.
Reviewed-on: graham/towerops-web#163
For devices with device_role="backhaul", traffic graphs now show capacity
reference lines that update over time based on which interfaces are active.
Features:
- Calculates total capacity per timestamp from active monitored interfaces
- Uses configured_capacity_bps if set, falls back to if_speed
- Capacity adjusts as interfaces go up/down throughout the time period
- Shows as dashed lines at +capacity (inbound) and -capacity (outbound)
- Matches the existing 0-axis graph style
Implementation:
- Small graph (device detail page): Updated build_traffic_json_datasets/2
and add_capacity_datasets/3 in device_live/show.ex
- Full-page graph: Updated build_traffic_datasets/2 and
add_capacity_to_full_graph/4 in graph_live/show.ex
The capacity lines provide visual reference for backhaul link saturation,
showing how close actual throughput is to maximum capacity at each point
in time.
Reviewed-on: graham/towerops-web#113
Set up mix_gleam archive, gleam_stdlib, and gleeunit deps. Add Gleam
compiler to all Dockerfiles, CI workflows, nix shell, and .tool-versions.
Rewrite Numeric, QueryHelpers, and URLValidator from Elixir to Gleam with
full ExUnit test coverage. Update all callers to use the Gleam modules
directly via :towerops@module syntax. Remove duplicate sanitize_like/1
private functions in snmp.ex and trace.ex.
Reviewed-on: graham/towerops-web#98
Chart.js was showing integer-rounded values like '2' instead of '2.1 ms'. Uses toFixed(1) in tick callbacks for proper decimal display with units.
Reviewed-on: graham/towerops-web#76
DNS check graph now shows two datasets: Response Time (ms) on left y-axis and Status (Up/Down) on right y-axis with stepped green fill. Also adds space before units in chart labels.
Reviewed-on: graham/towerops-web#74
This commit implements the unified checks architecture that consolidates
SNMP monitoring with HTTP/TCP/DNS checks under a single "check" abstraction,
enabling consistent graphing, alerting, and management across all check types.
Database Changes:
- Add source_type and source_id to checks table for tracking auto-discovered
vs manually created checks
- Add value field to check_results for storing numeric sensor readings
- Maintain backward compatibility with existing check_results data
New SNMP Executors:
- SnmpSensorExecutor: Poll sensor OIDs and return formatted values with
status determination (OK/WARNING/CRITICAL based on limits)
- SnmpInterfaceExecutor: Poll interface stats (bandwidth, packets, errors)
- SnmpProcessorExecutor: Poll CPU/processor usage
- SnmpStorageExecutor: Poll disk/memory usage with percentage calculations
Check Execution Worker:
- CheckExecutorWorker: Unified Oban worker that dispatches to appropriate
executor based on check_type (snmp_sensor, snmp_interface, http, tcp, etc.)
- Self-schedules next execution with distributed polling offsets
- Records results in check_results TimescaleDB hypertable
- Updates check state (OK/WARNING/CRITICAL/UNKNOWN)
Discovery Integration:
- Auto-creates checks during SNMP discovery for sensors, interfaces,
processors, and storage
- Links checks to source entities via source_id for data lookup
- Enables/disables checks based on discovery results
UI Enhancements:
- Checks tab on device detail page with grouped display
- FormComponent for adding manual HTTP/TCP/DNS checks
- Empty state with "Run Discovery" prompt
- Check status badges and last checked times
Graphing:
- Update GraphLive to accept check_id parameter
- Query check_results table for time-series data
- Support all check types (SNMP, HTTP response times, etc.)
Testing:
- Comprehensive test suite for SnmpSensorExecutor (5 tests)
- Test suite for CheckExecutorWorker (7 tests)
- Test coverage for discovery check creation (6 tests)
- Remove deprecated monitoring_test.exs testing old API
Bug Fixes:
- Fix SNMP executors reading credentials from correct Device schema fields
(device.snmp_version instead of device.snmp_device.version)
- Update agent channel test to query MonitoringCheck table directly
Code Quality:
- Extract add_snmp_credentials helper to reduce cyclomatic complexity
- Use map-based lookups for sensor formatting and check type grouping
- Apply pattern matching in dispatcher to reduce complexity
- All credo checks passing with no issues
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
live poll mode used get_device_assignment which only checks direct
device-level assignments. devices with agent assigned at site or
org level fell through to direct Phoenix SNMP. replaced with
get_effective_agent_token which walks the full cascade.
Display latency values with single decimal precision (e.g., 114.1ms)
for improved readability in graphs. This ensures consistency between
the raw chart data and tooltip formatting.
Changes:
- Fix traffic graph to handle nil interface octets gracefully
- Add comprehensive tests for nil octets scenarios
- Fix agent polling query to support devices assigned directly to org (left join on sites)
- Fix test SNMP connection to inherit credentials from site/org
- Refactor agent_channel process_polling_result to reduce nesting (Credo)
- Add alias for JobCleanupTask in application.ex (Credo)
This fixes crashes when interface stats have nil octets and ensures
devices without a site assignment can be polled by agents.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Added Logger.require for debug logging
- Refactored fetch_latest_agent_data to reduce nesting depth
- Added debug logging to trace agent assignment detection
- Check for nil/stale sensor readings and log appropriately
- Use actual reading timestamp instead of current time for data points
This will help diagnose why live polling shows 0 values and why
Phoenix SNMP disabled messages appear for agent-assigned devices.
Modified GraphLive live polling to check for agent assignments and use
agent-collected sensor data from the database instead of doing direct
SNMP polling. This respects the agent assignment and prevents Phoenix
from bypassing the agent for live graph updates.
Also refactored handle_params to reduce nesting depth.
Devices can belong directly to organizations without sites. Fixed
perform_live_poll to check device.organization_id instead of
device.site.organization_id which caused BadMapError when site is nil.
Also removed unused Repo alias.
- Created new on_mount hook :load_default_organization that automatically loads user's first organization
- Moved sites and devices routes to root path (/ sites, /devices) instead of /orgs/:org_slug
- Updated all navigation links and route references throughout the app
- Dashboard, alerts, and agents still use org-specific routes (/orgs/:org_slug)
- Users can still switch organizations via org selector for other pages
- Pass range parameter to SensorChart hook via data-range attribute
- Calculate x-axis min/max dynamically based on selected range (1h, 6h, 12h, 24h, 7d, 30d)
- Show date + time on x-axis labels for ranges > 24 hours
- Show time only for ranges <= 24 hours
- Fixes issue where 7d and 30d graphs showed incorrect time range
Updated all references to use the more technically accurate term 'ICMP Latency'
instead of 'Ping Latency' in:
- Graph titles and labels
- HTML comments
- Test assertions
- Add Monitoring.get_latency_data/2 to query successful checks with response times
- Support 'latency' sensor type in GraphLive.Show with configurable time ranges
- Add latency chart to device show page alongside other metric charts
- Add comprehensive tests for get_latency_data/2 (limit, since, failed checks)
- All 813 tests passing with no Credo warnings
