Two new multi-source rules using data we already collect, both wired
into the existing hourly RecommendationsRunWorker.
SectorOverload — fires when a Preseem-monitored AP has <25% free
airtime AND active subscribers. Critical urgency when free airtime
drops below 15%, OR when free airtime <25% AND QoE <50. Reuses the
airtime/subscriber/QoE data already pulled by PreseemSyncWorker so
no new collection is needed. UI: orange evidence card with free
airtime, subscriber count, QoE score, and AP model.
CpeRealign — fires when a wireless client has BOTH signal_strength
<=-78 dBm AND SNR <=18 dB seen in the last 2 hours. This is the
classic alignment / obstruction signature, distinct from the
existing single-metric wireless_signal_weak / wireless_snr_low
alerts produced by WirelessInsightWorker. One insight per (AP, CPE)
pair via a metadata.dedup_key. Critical when signal <=-88 OR SNR
<=10. UI: rose evidence card with signal, SNR, TX/RX rate, distance,
hostname.
Insights.insert_insight_if_new/1 dedup logic now prefers a
metadata.dedup_key over device_id when explicitly set, allowing
per-CPE insights without collapsing multiple CPEs on the same AP
into a single insight. Existing rules without dedup_key are
unaffected.
Insight.@valid_types extended with sector_overload and cpe_realign.
LLM enrichment automatically applies to both new types via the
existing Phase 1 worker — no extra wiring.
Also adds k8s/secrets.yaml to .gitignore so operators can drop a
local Secret manifest with real values, kubectl apply manually, and
never accidentally commit it. Documented in k8s/README.md.
When a wireless AP has a strong same-channel neighbor (RSSI >= -75 dBm)
and a measurably cleaner alternative channel exists in the same band,
the system now emits an ap_frequency_change insight with a specific
recommended channel and the top interfering BSSIDs as evidence.
- New schema wireless_neighbor_scans (append-only) storing observed
neighboring APs per device: bssid, ssid, channel, frequency_mhz,
channel_width_mhz, rssi_dbm, is_own_fleet, seen_at
- New columns on snmp_devices: current_channel, current_frequency_mhz,
current_channel_width_mhz, last_radio_seen_at — populated by vendor
SNMP profiles for APs that expose wireless OIDs
- Towerops.Recommendations.Rules.FrequencyChange — pure rule that scores
each candidate channel using sum-of-linear-power over the last 24h of
neighbor scans, recommends the cleanest if it beats the current by at
least 6 dB. Critical urgency when current score >= 100.
- Towerops.Workers.RecommendationsRunWorker — hourly Oban cron, iterates
organizations and runs all rules, uses insert_insight_if_new/1 for
idempotent upsert
- LiveView /insights renders a purple frequency-change card with current
vs recommended channel, dB-cleaner badge, and a top-offender list
(BSSID, SSID, RSSI, own-fleet flag)
- LLM enrichment automatically applies to the new insight type
Also fixes two pre-existing flaky tests that surfaced in CI:
- test/towerops_web/live/agent_live_test.exs:567 — now sets an explicit
Req.Test transport_error stub for ReleaseChecker and uses Req.Test.allow
so the LiveView process inherits it. Previously relied on absence of a
stub, which leaked across tests and produced different behavior under
full-suite parallel runs.
- test/towerops_web/telemetry_test.exs:140 — relaxes the "no log" check
to refute the specific messages the function under test would emit,
rather than asserting an empty capture_log/1 buffer (which catches
stray logs from concurrent tests, e.g. Postgrex sandbox disconnects).
Adds an optional plain-language summary and recommended action to every
active insight. A new Oban cron worker runs every 5 minutes, picks up
unenriched insights, and asks the configured LLM to restate the finding
and suggest one specific action grounded in the structured metadata.
- Migration: adds llm_summary, recommended_action, llm_model,
llm_enriched_at columns to preseem_insights
- Towerops.LLM context with swappable behaviour; real client uses Req
with the standard Req.Test plug for test isolation
- MockClient + InsightPrompt module (builds chat messages, parses JSON
with code-fence stripping and a raw-text fallback)
- Worker logs and skips on rate limits / missing key / parse errors so
insights still render without an AI summary when the LLM is unavailable
- Optional towerops-llm k8s secret with example template; deployment.yaml
references it as optional in both init and main containers
- UI renders summary + recommended action callout on /insights and on
the org-level insights page
- Adds TcpExecutor receive timeout test using a server that accepts
but never responds, exercising recv timeout branch
- Adds Preseem.get_device_qoe_data tests covering both no-APs and
with-metrics paths through the AP query + metric formatting
Adds 4 tests that drive the nil → nil fallbacks in
load_single_sensor_chart_data, load_storage_chart_data,
load_interface_errors_chart_data, and load_interface_traffic_chart_data
by navigating to graph routes with non-existent IDs.
Adds tests across five files:
- Towerops.Monitoring.CheckQuery (full coverage of all composable filter
fragments via inspect+Repo.all)
- ToweropsWeb.Admin.SecurityLive.Index change_filter event for both
permanent and temporary filter values
- Towerops.Agents.AgentCache cleanup_expired handle_info path that
prunes stale device entries while preserving :global_default
- ToweropsWeb.Api.V1.AgentReleaseWebhookController happy path
(notified/skipped/version) and error path (Codeberg 503)
- ToweropsWeb.DeviceLive.Index reorder_device / reorder_site
unauthorized branches via cross-org device/site fixtures
- New `sync_worker_perform_test.exs` drives every cron sync worker's
`perform/1` body via `Req.Test` stubs, exercising the {:error, _}
branch of `sync_integration/1` for Sonar, Splynx, Visp, and NetBox,
plus the should_sync?-skip path.
- OnboardingLive: covers `finish` event, `skip` from :agent (both
trigger complete_onboarding), and `go_to_step :agent` (which calls
the previously-untested `load_agent_token/1`).
- GaiiaInsightWorker: adds a test that drives `generate_mismatch_insights/2`
by inserting an inventory item whose ip_address disagrees with its
mapped device.
Coverage: 86.52% → 86.61%.
Adds focused tests across multiple modules to push toward the 87% threshold:
- CoreComponents: pagination/1 (multi-page, ellipsis, params),
list/1 (slot rendering), and signal_badge/1 across all RSSI bands.
- ApiDocs/GraphQLDocs controllers: bypass-the-router pattern so the
"scope-with-organization" branches are actually exercised (the public
routes are unscoped, so the org branch is unreachable via get/2).
- Mix.Tasks.Unused: text + JSON output, --only / --skip filters.
- Mix.Tasks.JobCleanupTask: prod path with phoenix snmp enabled vs
disabled (uses :job_cleanup_settle_ms = 0 to avoid the 1s sleep).
- Member resolver: success path for remove/update_role on non-owner
membership, and the changeset-error branch for an invalid role.
- Check resolver: unauthenticated fallback clauses for list / get /
create / update / delete.
- RfLinks: nil-signal sort ordering, :unknown classification for
nil/nil signal+snr, :degraded filter, capacity_utilization edge
cases (max_rate 0/missing, both rates nil).
- StatusHelpers: status_emoji + title_with_status across green / red
branches (warning is unreachable given the active-alerts query).
- ApiTokens: spawn_async_update/2 path with env != :test.
- ImpactAnalysis: to_json/1 across nil and populated levels.
- Maintenance: query helpers (default-arity wrappers, active range)
and Show LiveView delete event redirecting to /maintenance.
- Coverage map: probe_point event handler.
- InvitationQuery: default-arity pending/1.
- Remove Mox.set_mox_global() in DPW extra test; rely on $callers
instead so concurrent vendor SNMP tests stop intermittently failing
with VerificationError.
- Make ToweropsWeb.Plugs.GraphQLIntrospectionTest async: false. It
mutates Application.put_env(:towerops, :env, :prod), which polluted
every async vendor test that reads :env via
Towerops.Snmp.Client.phoenix_snmp_disabled/0.
- Bump test pool queue_target/queue_interval. AgentChannelTest spawns
many `:proc_lib` channel processes that hold sandbox connections;
the default 50ms queue caused intermittent
'could not checkout the connection' errors.
- Tag real-System.cmd("ping") tests as :network so they're excluded
by default. Saves ~20s on every full run.
- Make JobCleanupTask's internal 1s settle sleep configurable via
:job_cleanup_settle_ms; the test overrides it to 0.
Plus the pending CoverageLive.Form edit-save / EIRP recompute and
TraceLive deep-link tests from before the compact.
The current ApiDocs/GraphQLDocs templates don't surface the sample_token
back into the rendered HTML, so the previous assertions were checking
for strings that don't exist. Drop them down to a 'page renders' check.
The controller branches that compute sample_token still get exercised.
Add focused tests across many modules to push overall coverage from
75.45% to ~77%.
New test files:
- test/towerops/snmp/topology_test.exs
- test/towerops/vault_test.exs
- test/towerops/workers/check_worker_test.exs
- test/towerops_web/graphql/resolvers/happy_path_test.exs
- test/towerops_web/graphql/schema_test.exs
- test/towerops_web/live/reports_live_test.exs
Expanded existing tests for: Airos vendor, ProfileWatcher, StormDetector,
LLDP, GpsSync, MikrotikBackupWorker, AdminController, MibController,
MobileController, GeoipController, OnboardingLive, UserResetPasswordLive,
SessionManager, Telemetry, CoverageLive.Show.
Also fix a pre-existing dead test in ApplicationSettingTest where the
schema default for value_type made the 'invalid without value_type' test
unreachable.
Apply Testing LiveView course patterns (live/2, has_element?,
render_click, form/3). Add tests for MobileQRLive, WeathermapLive,
StatusPageLive, controllers, plugs, and pure function modules.
Expand proto decode coverage to 85.24%.
Dialyzer:
* Add Lidar.Tile @type, narrow several @specs to match success-typing,
prefix discarded function returns with `_ =`, fix the broken
File.stream! call in the ms-buildings worker (it was causing dialyzer
to mark every private fun unreachable), broaden Antenna.spec key
types from `float()` to `number()` to match catalog int literals.
* Add :geo, :geo_postgis, :db_connection to plt_add_apps so the dep
PLT actually contains the modules we use.
* Result: 0 unsuppressed dialyzer warnings (was 50+ in project code).
Tree canopy:
* Replace the dead landfire.gov URL with the ETH Zurich Global
Canopy Height 10 m product. ETH publishes proper COGs with
overviews on libdrive.ethz.ch — confirmed working with
/vsicurl/ byte-range reads. The module now picks the 3°×3° tile
containing the bbox centroid, with both a `:metres` decoder
(ETH Byte raster, NoData=255) and a `:landfire_evh` decoder for
operators self-hosting LANDFIRE EVH COGs.
* Re-enable canopy by default now that there's a working source.
Tests (+105 tests, 0 failures):
* CoverageLive Index/Show/Form/Map — empty/loaded/auth states,
LiveView event handlers, formatters.
* Coverages.Building changeset + helpers.
* Coverages.TreeCanopy provider tile-URL builder and decoders.
* Workers.MsBuildingsImportWorker (full import flow incl. blank
lines, MultiPolygon, idempotency, hash fallback) — also fixed
the partial-index ON CONFLICT bug that prevented imports from
ever working: the unique index has WHERE ms_footprint_id IS
NOT NULL, so the worker now uses an :unsafe_fragment conflict
target that includes the predicate.
* GraphQLDocsController smoke test (was 0%).
Coverage rose from 73.19% → 74% with the major project modules I
touched all moved from 0% / <50% to >75%.
