Adds a vendor-agnostic radio-state extractor that lets the frequency-
aware rules actually fire on production data without per-vendor
plumbing for each profile.
- Towerops.Snmp.RadioState — pure module that maps a frequency in MHz
to the corresponding 802.11 channel across 2.4 GHz, 5 GHz, and 6 GHz
bands; reads the freshest "frequency" sensor (already emitted by
Cambium/MikroTik/AirOS/Mimosa/Exalt/etc. profiles) and persists the
AP-level current_frequency_mhz, current_channel, last_radio_seen_at
fields onto snmp_devices.
- DevicePollerWorker now calls RadioState.update_from_sensors/1 after
each sensor poll so frequency-aware rules read a single canonical
source instead of joining sensors at query time.
- Towerops.Recommendations.Rules.OwnFleetChannelConflict — new rule
that needs no neighbor-scan collection: detects when 2+ of our own
APs at the same site share a channel (self-interference). One
insight per (site, channel) with a clickable list of conflicting
APs and their channel widths. Critical when 3+ APs share a channel.
- Insight.@valid_types extended with own_fleet_channel_conflict.
- UI: amber card showing channel, frequency, AP count, and the linked
list of conflicting devices.
Wired into the existing hourly RecommendationsRunWorker. LLM
enrichment automatically applies via the Phase 1 worker.
Two new multi-source rules using data we already collect, both wired
into the existing hourly RecommendationsRunWorker.
SectorOverload — fires when a Preseem-monitored AP has <25% free
airtime AND active subscribers. Critical urgency when free airtime
drops below 15%, OR when free airtime <25% AND QoE <50. Reuses the
airtime/subscriber/QoE data already pulled by PreseemSyncWorker so
no new collection is needed. UI: orange evidence card with free
airtime, subscriber count, QoE score, and AP model.
CpeRealign — fires when a wireless client has BOTH signal_strength
<=-78 dBm AND SNR <=18 dB seen in the last 2 hours. This is the
classic alignment / obstruction signature, distinct from the
existing single-metric wireless_signal_weak / wireless_snr_low
alerts produced by WirelessInsightWorker. One insight per (AP, CPE)
pair via a metadata.dedup_key. Critical when signal <=-88 OR SNR
<=10. UI: rose evidence card with signal, SNR, TX/RX rate, distance,
hostname.
Insights.insert_insight_if_new/1 dedup logic now prefers a
metadata.dedup_key over device_id when explicitly set, allowing
per-CPE insights without collapsing multiple CPEs on the same AP
into a single insight. Existing rules without dedup_key are
unaffected.
Insight.@valid_types extended with sector_overload and cpe_realign.
LLM enrichment automatically applies to both new types via the
existing Phase 1 worker — no extra wiring.
Also adds k8s/secrets.yaml to .gitignore so operators can drop a
local Secret manifest with real values, kubectl apply manually, and
never accidentally commit it. Documented in k8s/README.md.
When a wireless AP has a strong same-channel neighbor (RSSI >= -75 dBm)
and a measurably cleaner alternative channel exists in the same band,
the system now emits an ap_frequency_change insight with a specific
recommended channel and the top interfering BSSIDs as evidence.
- New schema wireless_neighbor_scans (append-only) storing observed
neighboring APs per device: bssid, ssid, channel, frequency_mhz,
channel_width_mhz, rssi_dbm, is_own_fleet, seen_at
- New columns on snmp_devices: current_channel, current_frequency_mhz,
current_channel_width_mhz, last_radio_seen_at — populated by vendor
SNMP profiles for APs that expose wireless OIDs
- Towerops.Recommendations.Rules.FrequencyChange — pure rule that scores
each candidate channel using sum-of-linear-power over the last 24h of
neighbor scans, recommends the cleanest if it beats the current by at
least 6 dB. Critical urgency when current score >= 100.
- Towerops.Workers.RecommendationsRunWorker — hourly Oban cron, iterates
organizations and runs all rules, uses insert_insight_if_new/1 for
idempotent upsert
- LiveView /insights renders a purple frequency-change card with current
vs recommended channel, dB-cleaner badge, and a top-offender list
(BSSID, SSID, RSSI, own-fleet flag)
- LLM enrichment automatically applies to the new insight type
Also fixes two pre-existing flaky tests that surfaced in CI:
- test/towerops_web/live/agent_live_test.exs:567 — now sets an explicit
Req.Test transport_error stub for ReleaseChecker and uses Req.Test.allow
so the LiveView process inherits it. Previously relied on absence of a
stub, which leaked across tests and produced different behavior under
full-suite parallel runs.
- test/towerops_web/telemetry_test.exs:140 — relaxes the "no log" check
to refute the specific messages the function under test would emit,
rather than asserting an empty capture_log/1 buffer (which catches
stray logs from concurrent tests, e.g. Postgrex sandbox disconnects).
Adds an optional plain-language summary and recommended action to every
active insight. A new Oban cron worker runs every 5 minutes, picks up
unenriched insights, and asks the configured LLM to restate the finding
and suggest one specific action grounded in the structured metadata.
- Migration: adds llm_summary, recommended_action, llm_model,
llm_enriched_at columns to preseem_insights
- Towerops.LLM context with swappable behaviour; real client uses Req
with the standard Req.Test plug for test isolation
- MockClient + InsightPrompt module (builds chat messages, parses JSON
with code-fence stripping and a raw-text fallback)
- Worker logs and skips on rate limits / missing key / parse errors so
insights still render without an AI summary when the LLM is unavailable
- Optional towerops-llm k8s secret with example template; deployment.yaml
references it as optional in both init and main containers
- UI renders summary + recommended action callout on /insights and on
the org-level insights page
ePMP devices were not reporting firmware_version because the YAML's
cambiumCurrentuImageVersion.0 OID returns empty on ePMP3000 firmware.
Add detect_version/1 to the Epmp vendor module with two-OID fallback:
cambiumCurrentSWInfo.0 (verbose, ePMP3000-friendly) → cambiumCurrentuImageVersion.0
(short, ePMP1000/2000), with a regex to extract the version triplet
from whatever the device returns.
ePMP3000 also has a sysObjectID quirk where some firmware reports the
generic NetSNMP-on-Linux ID (.1.3.6.1.4.1.8072.3.2.10) instead of the
Cambium enterprise OID, causing devices to misclassify as the linux
profile. Add a second discovery block to the epmp profile that matches
NetSNMP-OID + PREEMPT_RT armv7l kernel signature + a confirming snmpget
against the Cambium ePMP MIB tree, so detection runs in pass-2
(conditional non-generic) before linux falls through in pass-3.
Updates all docs, UI copy, release checker, proto go_package,
container image refs, and tests to point at
codeberg.org/towerops-agent/towerops-agent. Also deletes stray
empty package.json/package-lock.json (Phoenix uses esbuild — no
npm) and an unused test_encode_decode.exs scratch file.
Closes the cnHeat-parity gap on modes and clutter:
Backend
- Towerops.Coverages.Buildings.for_bbox/1 — PostGIS ST_Intersects
query that returns each building polygon as a compact
%{height_m, coords} map ready for in-memory point-in-polygon
testing, so the per-pixel hot loop never round-trips to
Postgres.
- Towerops.Coverages.Profile.sample/5 — accepts an optional
:clutter list and adds the building rooftop height to terrain
whenever a sample point falls inside a polygon. Pure ray-cast
PIP for portability.
- Towerops.Workers.CoverageWorker — fetches buildings once per
job and computes BOTH LOS and NLOS variants per SM-height
tier (12 PNGs total). LOS passes clutter: [] (height-above-
clutter view), NLOS passes the prefetched list (height-above-
ground view with rooftop diffraction). Pixel-loop signature
bundled into a ctx map to keep the function arity within
Credo's max-8 limit.
- Towerops.Workers.MsBuildingsImportWorker — streams Microsoft
GlobalMLBuildingFootprints GeoJSONSeq exports line-by-line,
upserts into coverage_buildings in 500-row batches via
insert_all + ON CONFLICT (source, ms_footprint_id). Handles
Polygon and MultiPolygon geometries; stable-hashes the bbox
when an explicit feature id is missing so re-imports are
idempotent. Public import_file/2 lets ops drive a state at
a time from IEx.
- Schema: nlos_tiers JSONB column on coverages, status_changeset
whitelist, payload exposed via list_ready_for_organization.
Frontend
- LOS / NLOS toggle pills above the height slider (left panel).
Selecting NLOS swaps each L.imageOverlay's URL via setUrl to
the matching nlos_tiers PNG, drops the cached pixel data, and
re-decodes for the RSSI filter; falls back to the other
mode's tiers when one is empty so older coverages still
render. coverage_hooks chunk: 22 KB → 25 KB.
Vertical 'Height above clutter' slider on the left of the map now
matches cnHeat's experience: pick an SM install height, the heatmap
re-renders to show only the coverage achievable from that height.
Backend
- New JSONB height_tiers column on coverages keyed by string metres
→ relative PNG path.
- CoverageWorker runs compute_pixels once per tier in
[1.83, 3.05, 4.57, 6.10, 9.14, 12.19] m (~6/10/15/20/30/40 ft)
by varying receiver_height_m on a copied struct. Each tier
writes its own raster + PNG via Raster.write/4 with a per-height
filename suffix; the default 3.05 m tier also populates the
legacy raster_path / png_path so existing show pages keep
working.
Frontend
- Vertical range slider (writing-mode: vertical-lr) anchored
centre-left. Step picks one of HEIGHT_TIERS_FT; label updates
to '6 ft'..'40 ft'.
- pngForCoverage/2 picks the closest available tier from the
payload's height_tiers map, falling back to the original png
for coverages not yet recomputed.
- On slider change the JS swaps each L.imageOverlay's URL via
setUrl, drops the cached pixel data, and re-decodes so the RSSI
filter still applies. coverage_hooks chunk: 20 KB → 22 KB.
Earlier commit a9aa8bf9 had the message but only the test tweak made
it through pre-commit stashing. This is the implementation:
- lib/towerops/lidar/sources/usgs_ned.ex
- lib/towerops/lidar.ex (mosaic_from_ned + get_elevation_from_ned
fallback paths)
- lib/towerops/coverages/building.ex + migration scaffolding
- lib/towerops/workers/coverage_worker.ex error message
- test_helper.exs and the lidar test changes
Sourced 198 vendor-published MSI Planet pattern files via the
wireless-planning.com aggregator (data1.mlinkplanner.com). Real
patterns now ship for: Cambium (6), Ubiquiti (154), RF Elements
(27), MARS (5), MTI Wireless (1), Tarana (2), Ruckus (1), RFE (2).
Files dropped into priv/antennas/<vendor>-<part>.msi; the existing
boot loader picks them up and they override the synthesized catalog
entries by slug where the slugs match.
Parser improvements to handle real-world MSI file quirks:
- File-extension filter now accepts .ant/.msi (case-insensitive).
- Slug normalisation: spaces, +, and other non-alnum collapse to
hyphens.
- Header parser splits on whitespace runs (tab or space) — different
vendor tools produce different delimiters.
- New parse_frequency_mhz/1 handles "5500", "5 GHz", "5GHz",
"5.6GHz", "5500 MHz", "5150-5850" (centre frequency), and
"5.45 - 5.85 GHz" formats. Replaces the old integer-only parse.
- 2 MARS files with non-360 angular resolution and 1 with
angle-less pattern lines were excluded; the rest parse cleanly.
Total registry now 305 antennas: 198 real vendor patterns + 107
synthesized catalog entries (used as fallback for SKUs without
public .msi files: Cambium ePMP/PMP variants, Tarana G1/G2,
ALPHA, ITELITE, KP Performance, RADWIN, Mimosa, etc.).
Leaflet auto-load fix:
- The location-picker map wasn't appearing because the form page
didn't have the inline <script> tag the existing site map uses
to load Leaflet. AGENTS.md forbids inline <script> in templates,
so I added an ensureLeaflet() helper in app.ts that lazy-loads
/vendor/leaflet/leaflet.{js,css} on first hook mount and caches
the promise. SitesMap, CoverageMap, and CoverageLocationPicker
all use it now — no inline scripts needed.
After picking a site in the coverage form, a new optional dropdown
lets the user attach the coverage to one of the devices at that site.
The dropdown reloads on every site change. If the site has no devices
yet, a hint replaces it.
Schema: nullable device_id FK on coverages (on_delete: nilify_all so
deleting a device leaves the coverage standing). Filtered by both
site_id and organization_id when loading the dropdown options.
Show page lists the attached device by name (or IP) when set.
The compute pipeline now actually runs: per-pixel path loss over LIDAR
terrain, antenna pattern lookup, real GeoTIFF + colored PNG output,
Leaflet imageOverlay rendering with opacity slider and dBm legend.
Propagation:
- Towerops.Coverages.Propagation: Friis FSPL + Bullington single-knife-edge
diffraction (ITU-R P.526). Pure Elixir, closed-form, no NIF dependency.
Clean signature so a future ITM/Longley-Rice backend can drop in.
- Towerops.Coverages.Profile: AAIGrid sampler with elevation_at, sample
along great circle, haversine distance.
- Towerops.Coverages.Raster: Float32 GeoTIFF via gdal_translate (with VRT
wrapper) and colored PNG via gdaldem color-relief. Outputs to
priv/static/coverage/<org>/<id>/, served by existing Plug.Static.
Worker:
- Towerops.Workers.CoverageWorker now does the full pipeline: bbox compute
-> Towerops.Lidar.get_elevation_grid -> per-pixel Task.async_stream
(parallel = schedulers) running antenna pattern lookup + propagation +
RSSI threshold check, write rasters. Configurable terrain source via
:coverage_terrain_module application env so tests can stub. Friendly
failure messages for :no_tile, :grid_too_large, :nodata,
:unknown_antenna, :missing_location.
Bundled antenna catalog (~95 entries):
- AntennaCatalog with compact specs for every antenna in the request list:
Cambium, ALPHA, Antel, ITELITE, KP Performance, L-com, MARS, MikroTik,
Mimosa, MTI, RADWIN, RF Elements, Ruckus, Tarana, Simulate, Ubiquiti.
- Antenna.from_spec/1 synthesizes 360+360 attenuation patterns from
gain+beamwidth (cosine-squared main lobe, smooth transition,
front-to-back floor with mild ripple). Real .ant files in priv/antennas/
override the catalog by slug. Test fixtures moved to test/support.
Schema (migration add_radio_fields_to_coverages):
- tx_power_dbm replaces eirp_dbm; EIRP is now derived as
tx_power + antenna.gain - cable_loss in Coverage.eirp_dbm/2 and shown
live in the form header.
- cable_loss_db, sm_gain_dbi, latitude_override, longitude_override,
height_above_rooftop_m, tx_clearance_m, foliage_tuning (0-100 slider).
- Coverage.location/1 returns {lat, lon} from override or parent site.
UI:
- form.html.heex: cnHeat-style grouped form (Identity / Location /
Mounting / RF / Coverage extent), foliage tuning range slider,
computed EIRP badge in the header.
- show.html.heex: Leaflet map area with L.imageOverlay heatmap,
opacity slider, dBm color legend, antenna marker with directional
wedge for azimuth.
- assets/js/app.ts: CoverageMap hook registered.
Tests: 24 new (propagation reference values, profile sampling,
worker end-to-end with stubbed terrain that writes real GeoTIFF + PNG,
org-mismatch job-cancel guard). Full suite: 10815 tests.
End-to-end CRUD scaffold for per-site, per-antenna RF coverage
prediction. Schema, context, antenna registry, Oban worker stub, and
three LiveViews are wired up; the actual ITM + LIDAR + buildings
compute pipeline lands in a follow-up.
- Migration + Coverage schema with full validation (RF params, pixel-
budget cap, antenna_slug existence). organization_id excluded from
cast (programmatic-only).
- Coverages context: org-scoped CRUD, validate_site_in_organization
rejects cross-tenant site_id refs at insert/update, queue_compute
with PubSub broadcast on per-coverage and per-org topics.
- MSI Planet .ant parser + persistent_term registry loaded at boot
from priv/antennas/. Two synthetic .ant fixtures (omni + 90deg
sector) bundled.
- CoverageWorker on new :coverage Oban queue (concurrency 2). Job
args carry organization_id; worker refuses to run on org mismatch.
Stub flips status to "failed" with "compute not yet implemented"
so the UI flow is exercisable.
- LiveViews: index (org-wide, live status updates), form (antenna
picker grouped by manufacturer), show (status banners, params
panel, map placeholder). Sidebar nav link added.
- Routes /coverage, /coverage/new, /coverage/:id, /coverage/:id/edit
under :require_authenticated_user_with_default_org.
- 41 new tests covering schema validation, .ant parsing, context
CRUD with cross-org guards, Oban job enqueue.
Catalog-only system for LIDAR-derived 1m DEMs covering Texas. We do not
mirror raster data — the DB stores tile metadata (URL + footprint
geometry) and elevation values are streamed on-demand from public USGS
3DEP / TNRIS Cloud-Optimized GeoTIFFs via GDAL /vsicurl/ HTTP byte-range
reads. Used for future tower coverage line-of-sight calculations.
- Enable PostGIS extension; tile footprints indexed via GiST
- Catalog sync from USGS 3DEP (primary) and TNRIS (fallback for gaps)
- Tile dedup by ST_Contains so TNRIS doesn't duplicate 3DEP coverage
- Single-point reads via gdallocationinfo with tile fallthrough on nodata
- Grid retrieval via gdal_translate AAIGrid with multi-tile mosaicing
- Monthly Oban cron worker keeps catalog fresh
- gdal-bin added to runtime image; geo_postgis dep added
unpkg.com fetches were intermittently failing in production, leaving
the /sites-map page without a working map. Vendoring Leaflet (JS, CSS,
marker/layer images) under priv/static/vendor/leaflet/ removes the
runtime CDN dependency, the matching CSP relaxation, and the SRI hash
churn on future updates.
Add 'vendor' to ToweropsWeb.static_paths/0 so Plug.Static serves the
new tree, and revert script-src/style-src to no longer list unpkg.com.
connect-src still allows *.tile.openstreetmap.org for tile fetches.
The 1.7 upgrade migration added the new oban_workflows tracking but left
behind legacy state from earlier versions that the upgrade guide
strongly recommends removing
(https://oban.pro/docs/pro/v1-7.html):
- The uniq_key / partition_key GENERATED ALWAYS columns. The Smart
engine no longer reads them; uniqueness and partition lookups now
use expression indexes on meta. Keeping the columns imposes write
overhead on every oban_jobs insert/update and was contributing to
intermittent transaction-rollback errors.
- The oban_jobs_*_old workflow/chain indexes. v1.7 renamed the
originals and built expression-based replacements; the _old indexes
are dead weight that still slow down writes.
Also extend ErrorTrackerIgnorer to drop transient
DBConnection.ConnectionError noise ("connection is closed",
"transaction rolling back"). These come from the Repo's intentional
queue-target / disconnect-on-error cycling that recovers from stale SSL
connections — Ecto retries automatically, so logging adds noise without
value.
The original equipment->device rename migration's ALTER INDEX RENAME was a
no-op (the index didn't exist by the legacy name at that point in the
migration sequence on existing databases), leaving the unique index named
agent_assignments_equipment_id_index. The schema's unique_constraint now
expects agent_assignments_device_id_index, causing a constraint violation
to surface as Ecto.ConstraintError instead of a changeset error.
Bumps vendored Oban Pro from 1.6.13 to 1.7.0, which transitively bumps
oban core to 2.22.1 (requires migrations v14) and db_connection to 2.10.0.
- mix.exs constraint: ~> 1.6 → ~> 1.7
- vendor/oban_pro/ replaced with v1.7.0 hex package
- migration 20260430142200: Oban core v12 → v14 (must run first)
- migration 20260430142241: Oban Pro 1.7.0 schema additions
Also corrects a pre-existing constraint name in AgentAssignment that was
left stale by the equipment→devices rename migration (20260117190134).
The unique index is named agent_assignments_device_id_index, but the
schema's unique_constraint/3 still pointed at the old equipment_id name,
causing the test suite to surface Ecto.ConstraintError instead of a
changeset error. Required to get the suite green for this upgrade.
Performance:
- schedule_live: preload page once instead of get_schedule!/1 per row
- alert_live + alerts: DB-side status filter; Repo.aggregate counts replace length/Enum.count over 500-row fetches on every event
- dashboard_live: drop duplicate get_device_status_counts; cap active alerts to 20 + use count_active_alerts/1
- maintenance.active_windows_for_device: 3 round-trips collapsed into one query (per-site-id branch keeps Postgres parameter types unambiguous)
- sites.build_site_tree: O(N^2) -> O(N) via group_by(parent_site_id)
- accounts.sole_owner_organizations: single group_by + having instead of per-org Repo.aggregate loop
- agents + agent_live (org + admin): count_assigned_devices_batch/1 + count_agent_polling_targets/1 (no preloads)
- alert_digest_worker: list_alerts_by_ids/1 batches digest fetch
- gaiia: distinct: true at DB; limit 50 on bidirectional ilike
Indexes:
- maintenance_windows(organization_id, starts_at, ends_at) WHERE suppress_alerts = true
- alerts(check_id) WHERE resolved_at IS NULL
Antipatterns:
- agents.delete_agent_token: PubSub.broadcast moved outside Repo.transaction so a rollback no longer leaves subscribers acting on a non-existent deletion
- integrations_controller.to_atom_keys: replaced String.to_existing_atom on user-controlled JSON keys with explicit allowlist
- 9 Task.start callsites converted to Task.Supervisor.start_child(Towerops.TaskSupervisor, ...) so background DB writes survive shutdown (test-mode discovery shims left as-is for sandbox semantics)
Three deferred followups from the chunk-4 plan, all together:
A. Restrictions editor
- Resolver: time_of_week support (weekday set + time-of-day window),
in addition to the existing time_of_day.
- New OnCall.update_layer_restrictions/2 + clear_layer_restrictions/1.
- schedule_live/show: per-layer Restrict on-call shifts form
(Always on call / Time of day / Time of week with Mon-Sun checkboxes),
changes patched live and persisted via the resolver.
B. Drag-and-drop reorder
- New OnCall.reorder_layers/2 + reorder_escalation_rules/2 (atomic
transaction; validates id count + membership).
- assets/js/sortable_list.ts: minimal HTML5 drag-and-drop hook (no
external dep; mirrors the existing DeviceListReorder pattern),
registered as SortableList in app.ts.
- schedule_live/show + escalation_policy_live/show: layer/level cards
now carry data-id + draggable + a visible drag handle. Up/down arrow
buttons remain as a fallback for users on assistive tech.
C. Unified new-schedule UX
- schedule_live/show pre-opens the Add Layer form when the schedule
has zero layers, so the new-schedule -> add-layers flow lands ready
to act on. Two existing tests updated to seed a layer first; two
new tests verify the auto-open behaviour both ways.
Full suite 10,231 / 0 failures. Format/dialyzer clean.
ScheduleLive.Index
- Name search input above the date nav (phx-debounce 300ms).
- Standard <.pagination> footer (10 per page) under the gantt cards.
- Both reflected in URL params (?search= and ?page=) for shareable
links; defaults are stripped from the URL.
- Refactored: load_schedules_with_timeline/3 -> hydrate_schedules/3
so filter/paginate/hydrate are clearly separate steps.
Tests
- 2 new ExUnit integration tests (search filter narrows results +
search input renders).
- e2e/tests/schedules.spec.ts: switched from table-row selectors to
card-link selectors (schedules tab is now gantt cards, not a table),
added smoke tests for date nav controls + search input + REPEAT
footer + Services sidebar, renamed "Add Rule" -> "Add Level".
Full suite 10,216 / 0 failures. Format/dialyzer clean.
OnCall context
- move_layer/2: up/down position swap for schedule layers, mirror of
move_escalation_rule/2 (tested for both directions + boundary no-op).
ScheduleLive.Show
- New move_layer event handler.
- Up/down arrow buttons on each layer card; the top arrow is disabled on
the first layer, the bottom on the last (matches the escalation policy
level reorder UX shipped in chunk 1).
- Replaced two per-hour walks (build_layer_spans + build_final_spans -
~672 resolve calls per render at 14 days) with Resolver.resolve_range/3
+ a small segments_to_spans/3 mapper. Per-layer view wraps each layer
in a temporary single-layer %Schedule{} so the resolver code path is
shared and overrides don't bleed into the per-layer strip.
Tests: 3 new context tests for move_layer, 1 new integration test for
the layer reorder UI. Full suite 10,214 / 0 failures. Format/dialyzer
clean.
Resolver
- Resolver.resolve_range/3: returns the contiguous on-call segments for a
schedule across [start_at, end_at). Walks layer handoffs + override
boundaries, drops gap segments, and merges adjacent same-user segments.
UserColor module
- New Towerops.OnCall.UserColor with deterministic id -> color mapping
(Tailwind class + matching #RRGGBB hex). Refactored ScheduleLive.Show
to use it instead of its own per-page index palette so the same person
gets the same color across the schedules list and detail pages.
ScheduleLive.Index
- Date navigation: Today / prev / next + 1/2/4-week range selector.
- URL-driven: ?start=YYYY-MM-DD&range=N for shareable views; falls back
to defaults on malformed values.
- Per-row card: schedule name link, on-call-now avatar swatch, day-of-week
header strip, gantt strip rendered as a CSS grid with one column per day,
Today marker overlay.
Tests: 5 new resolver tests, 9 new UserColor tests, 5 new ScheduleLive
integration tests. Full suite: 10,210 / 0 failures. Format/dialyzer clean.
Also: cleaned up two stale inline comments in k8s/deployment.yaml that
disagreed with the values they sat next to (replicas/maxSurge).
Chunk 1 of the on-call/escalation redesign plan
(docs/plans/2026-04-28-on-call-pagerduty-style-redesign.md):
Schema
- on_call.ex: list_devices_using_policy/2 (direct + org-default inheritance)
- on_call.ex: move_escalation_rule/2 for up/down level reordering
- list_escalation_policies/1 now preloads :rules
Show page
- Levels rendered as numbered cards with up/down/delete controls
- "Notify the following users immediately and escalate after N minutes."
- REPEAT footer surfaces repeat_count inline (no longer a standalone column)
- Right-side Services sidebar lists devices using the policy
- Header line shows the handoff notifications mode (when in use by a service /
always / never)
Edit form
- Removed standalone Repeat Count input
- Added handoff notifications mode select
- Added inline "If no one acknowledges, repeat this policy N time(s)" block
Index views (policies tab + standalone)
- Replaced Repeat Count column with a Levels (rule count) column
Other
- rate_limit.ex: bind unmatched :ets.new/2 + schedule_clean/1 returns to fix
dialyzer :unmatched_returns warning under the project's strict flags.
All 10,191 tests pass; mix format clean; mix compile --warnings-as-errors clean;
mix dialyzer passes.
Oban 2.18+ introduced the 'suspended' job state for pausing jobs.
Oban.Met.Reporter queries for jobs in this state, causing errors when
the database enum doesn't include it:
ERROR 22P02 (invalid_text_representation) invalid input value
for enum oban_job_state: "suspended"
This migration adds 'suspended' to the oban_job_state enum type.
Required by recent Oban dependency updates (commit 0399b30d).
Note: Uses @disable_ddl_transaction since ALTER TYPE ADD VALUE cannot
run inside a transaction in PostgreSQL.
Reviewed-on: graham/towerops-web#199
The recent dependency update to phoenix_pubsub_redis 3.1.0 introduced
breaking changes in the configuration API. The new version no longer
accepts connection options at the top level - they must be nested in
:redis_opts.
Changes:
- Move Redix connection options into :redis_opts keyword list
- Keep only :node_name at top level per v3.1.0 requirements
- Maintains all resilience settings (timeouts, backoff, keepalive)
Before (invalid for v3.1.0):
[node_name: node(), host: "...", port: 6379, timeout: 5000, ...]
After (valid for v3.1.0):
[node_name: node(), redis_opts: [host: "...", port: 6379, timeout: 5000, ...]]
This fixes the production crash with error:
NimbleOptions.ValidationError: unknown options [:timeout, :backoff_initial,
:backoff_max, :exit_on_disconnection, :sync_connect]
Related: commit 0399b30d (Update Elixir dependencies)
Reviewed-on: graham/towerops-web#197
Fixes FunctionClauseError when DashboardLive receives {:alert_changed, org_id}
message broadcast by user_auth hooks.
The user_auth module subscribes all LiveViews to the
"organization:#{org_id}:alerts" topic and broadcasts {:alert_changed, org_id}
messages when alerts are created or resolved. DashboardLive was missing a
handle_info/2 clause to handle this message format, causing crashes in
production.
Solution:
- Added handle_info/2 clause for {:alert_changed, _org_id} message
- Uses existing debounced reload pattern to update dashboard
- Added test to verify message is handled without crashing
- Updated both technical and user-facing changelogs
All tests pass. The fix follows the same pattern used in AlertLive.Index
and DeviceLive.Show.
Reviewed-on: graham/towerops-web#189
Add complete memory pool monitoring using HOST-RESOURCES-MIB.
Tracks RAM/swap usage with historical data and real-time updates.
- Add Mempool and MempoolReading schemas
- Integrate discovery and polling with concurrent Task.async_stream
- Add 7 context API functions for querying mempools
- 24 new tests, all 8754 tests passing (0 failures)
Implements C1 from findings_librenms.md
Reviewed-on: graham/towerops-web#184
- Drop index if exists before creating to handle manual creation
- Prevents duplicate_table error when index was created manually
Reviewed-on: graham/towerops-web#179
- Add @disable_ddl_transaction and @disable_migration_lock for concurrent index
- Increase statement_timeout to 10min for DELETE operation on large tables
- Use concurrently: true on index creation to avoid table locks
- Refactor detect_airfiber_counter_overrides to fix credo nesting warning
- Prevents timeout errors in production deployment
Reviewed-on: graham/towerops-web#178
- Clamp negative counter deltas to zero instead of attempting 32-bit wrap
correction (matches LibreNMS behavior — wraps are indistinguishable from
HC counter resets, so discard the ambiguous data point)
- Add rate sanity check: discard values exceeding 400 Gbps as counter anomalies
- Add 4-byte binary decoding for 32-bit SNMP counters in decode_snmp_value
- Track HC vs standard counter usage per interface stat (is_hc field)
- Add migration for is_hc column on snmp_interface_stats
- Update tests to match new clamping behavior
Reviewed-on: graham/towerops-web#168
Missing indexes detected on 7 foreign key columns:
- on_call_overrides.user_id
- on_call_layer_members.user_id
- site_outages.site_id
- escalation_targets.user_id
- notification_digests.organization_id
- on_call_notifications.user_id
- alerts.site_outage_id (already existed, skipped)
Without indexes, PostgreSQL must perform sequential scans for:
- Referential integrity checks on DELETE/UPDATE of parent rows
- JOIN operations on these columns
- Can cause lock contention and slow queries
Indexes created with CONCURRENTLY option to avoid blocking production
tables during deployment.
Migration uses @disable_ddl_transaction and @disable_migration_lock
to ensure indexes are built without holding locks.
Reviewed-on: graham/towerops-web#167
Add data_retention_days field to organizations (default 365, range 30-730).
DataRetentionWorker runs nightly at 1 AM to purge expired time-series data
across 8 tables, respecting each org's retention setting.
TimescaleDB global retention bumped from 90 to 730 days as safety net.
Resolved alerts are cleaned up; unresolved alerts kept regardless of age.
Reviewed-on: graham/towerops-web#144
- Capacity: Sensor values (Rx/Tx Capacity) now represent total device
capacity, not per-interface. Previous bug applied the same sensor value
to all interfaces and summed them (e.g., 773.6 Mbps × 5 = 3.87 Gbps).
- Wireless sensors: Changed Float.round/2 to :erlang.float_to_binary/2
to prevent scientific notation in frequency display (was showing
"2.41e4 MHz" instead of "24100.0 MHz").
Files:
- lib/towerops_web/live/device_live/show.ex
- lib/towerops_web/live/device_live/show.html.heex
- CHANGELOG.txt
- priv/static/changelog.txt
Reviewed-on: graham/towerops-web#116
- Removed device_role_source assignment in sanitize_device_role/1
- Updated structure.sql to reflect database schema without device_role_source column
- Fixes ERROR 42703 (undefined_column) in production workers
The form was still trying to set device_role_source in params even though
the database column was dropped, causing runtime errors in:
- AgentLatencyEvaluator
- CapacityInsightWorker
- WirelessInsightWorker
All device roles are now manually set with default value 'other'.
Reviewed-on: graham/towerops-web#110
- Reduce device type options from 10 to 6 (server, switch, router, access_point, backhaul, other)
- Change label from "Device Role" to "Device Type"
- Disable auto-detection - device type is now required and manual-only
- Add migration to map existing device roles to new simplified set
- Update REST API to include device_role and device_role_source fields
- Automatically set device_role_source to "manual" when device_role is provided
- Update wireless detection to include "backhaul" type
- Enhance display formatting for "Access Point"
Breaking Changes:
- Auto-inference of device type has been disabled
- device_role is now a required field in forms
- GraphQL/REST API consumers will see changed device_role values after migration
Files Changed:
- lib/towerops_web/live/device_live/form.html.heex
- lib/towerops/topology.ex
- lib/towerops/snmp/discovery.ex
- lib/towerops/devices/device.ex
- lib/towerops_web/live/device_live/index.ex
- lib/towerops_web/controllers/api/v1/devices_controller.ex
- priv/repo/migrations/20260322152809_migrate_device_roles_to_simplified_set.exs
- test/towerops/topology_test.exs
- test/towerops_web/live/device_live/form_test.exs
Reviewed-on: graham/towerops-web#109
## Summary
- **Ping checks never scheduled**: `ensure_default_ping_check` created check records but never called `schedule_check`, so auto-created ping checks never executed
- **Skipped checks permanently orphaned**: `CheckExecutorWorker` only rescheduled checks that actually executed — skipped checks (agent-assigned, SNMP disabled) broke the scheduling chain permanently
- **No recovery mechanism**: `JobHealthCheckWorker` only recovered `DeviceMonitorWorker` jobs, not `CheckExecutorWorker` jobs — any lost check job was gone forever
## Changes
- `monitoring.ex`: Call `schedule_check` after creating ping check in `ensure_default_ping_check`
- `check_executor_worker.ex`: Reschedule skipped-but-enabled checks so conditions are re-evaluated next cycle
- `job_health_check_worker.ex`: Recover orphaned `CheckExecutorWorker` jobs for enabled checks (runs every 10 min)
- `devices.ex`: Wrap `ensure_default_ping_check` in try/rescue for deadlock resilience
## Test plan
- [x] New tests: ping check scheduling on creation, no duplicate scheduling on idempotent call
- [x] Updated tests: skipped checks now assert rescheduling instead of orphaning
- [x] New tests: health check worker recovers orphaned check executor jobs, skips disabled checks
- [x] All 177 targeted tests pass
- [x] Compile clean with warnings-as-errors
- [x] Pre-commit hooks pass (credo, format)
Reviewed-on: graham/towerops-web#71
## Summary
- Every device now automatically gets an ICMP ping check (`source_type: "auto_discovery"`) when created via `Monitoring.ensure_default_ping_check/1`
- When a device IP changes, the ping check host config is synced automatically
- Backfill migration inserts ICMP Ping checks for all existing devices that don't have one
- Fixes checkbox alignment in the Add Service Check modal (verify SSL / follow redirects)
## Test plan
- [x] 4 new tests for `ensure_default_ping_check/1` (create, idempotent, IP update, no-op)
- [x] 3 new tests for device lifecycle (auto-create on device create, sync on IP change, no-op when IP unchanged)
- [x] 13 existing tests updated to account for auto-created ping check
- [x] Full test suite passes (`mix precommit`)
- [ ] Verify backfill migration on staging
- [ ] Create device in UI, confirm ping check appears in service checks list
- [ ] Verify checkbox alignment in Add Service Check modal
Reviewed-on: graham/towerops-web#68
add ssl check executor that connects via TLS, reads peer certificate
expiry, and returns OK/WARNING/CRITICAL based on configurable
warning_days threshold. includes protobuf config, liveview form fields,
agent channel encoding, oban worker dispatch, and unit tests.
Reviewed-on: graham/towerops-web#64
- REST CRUD at /api/v1/checks for HTTP, TCP, DNS, ping checks
- GraphQL queries (checks, check) and mutations (create/update/delete)
- ping executor using system ping with macOS/Linux parsing
- check config validation for ping type (requires host)
- API documentation updated with checks resource section
Reviewed-on: graham/towerops-web#52
