mod mikrotik;
mod ping;
mod proto;
pub mod secret;
mod snmp;
mod ssh;
#[cfg(feature = "tui")]
mod tui;
mod version;
mod websocket_client;

use clap::Parser;
use std::env;
use std::sync::atomic::{AtomicBool, Ordering};
use std::sync::Arc;
use std::time::Duration;
use tokio::sync::watch;
use tokio::time::sleep;
use tracing_subscriber::EnvFilter;
use websocket_client::AgentClient;

fn init_logger(suppress_stdout: bool) {
    // Use LOG_LEVEL env var (fall back to RUST_LOG for backwards compatibility)
    let filter = env::var("LOG_LEVEL")
        .or_else(|_| env::var("RUST_LOG"))
        .unwrap_or_else(|_| "info".to_string());

    let builder = tracing_subscriber::fmt()
        .with_env_filter(EnvFilter::new(&filter))
        .with_target(false);

    if suppress_stdout {
        // Route to sink when TUI is active (using closure to create MakeWriter)
        builder.with_writer(std::io::sink).init();
    } else {
        builder.init();
    }
}

/// Determine if TUI should be enabled based on CLI flags and TTY detection
#[cfg(feature = "tui")]
fn should_enable_tui(args: &Args) -> bool {
    // If explicitly disabled, never enable
    if args.no_tui {
        return false;
    }

    // If explicitly enabled, always enable
    if let Some(explicit) = args.tui {
        return explicit;
    }

    // Auto-detect: check if stdout is a TTY
    use std::io::IsTerminal;
    std::io::stdout().is_terminal()
}

#[cfg(not(feature = "tui"))]
fn should_enable_tui(_args: &Args) -> bool {
    false
}

/// Convert HTTP(S) URL to WebSocket URL
fn convert_to_websocket_url(url: &str) -> String {
    if url.starts_with("http://") {
        url.replace("http://", "ws://")
    } else if url.starts_with("https://") {
        url.replace("https://", "wss://")
    } else if url.starts_with("ws://") || url.starts_with("wss://") {
        url.to_string()
    } else {
        // Default to wss:// for bare domains
        format!("wss://{}", url)
    }
}

#[derive(Parser)]
#[command(name = "towerops-agent")]
#[command(about = "Towerops remote SNMP polling agent", long_about = None)]
struct Args {
    /// API URL (e.g., wss://towerops.net or https://towerops.net)
    #[arg(
        long,
        env = "TOWEROPS_API_URL",
        required_unless_present = "mikrotik_test"
    )]
    api_url: Option<String>,

    /// Agent authentication token
    #[arg(
        long,
        env = "TOWEROPS_AGENT_TOKEN",
        required_unless_present = "mikrotik_test"
    )]
    token: Option<String>,

    /// UDP port for SNMP trap listener
    #[arg(long, env = "TRAP_PORT", default_value_t = snmp::DEFAULT_TRAP_PORT)]
    trap_port: u16,

    /// Enable SNMP trap listener
    #[arg(long, env = "TRAP_ENABLED", default_value_t = false)]
    trap_enabled: bool,

    /// Run MikroTik API test instead of normal agent operation
    #[arg(long)]
    mikrotik_test: bool,

    /// MikroTik device IP address (for --mikrotik-test)
    #[arg(long, required_if_eq("mikrotik_test", "true"))]
    mikrotik_ip: Option<String>,

    /// MikroTik username (for --mikrotik-test)
    #[arg(long, default_value = "admin")]
    mikrotik_user: String,

    /// MikroTik password (for --mikrotik-test)
    #[arg(long, default_value = "")]
    mikrotik_pass: String,

    /// MikroTik API port (for --mikrotik-test)
    #[arg(long, default_value_t = 8729)]
    mikrotik_port: u16,

    /// Use plain TCP instead of SSL (port 8728) - WARNING: credentials sent in plaintext
    #[arg(long, default_value_t = false)]
    mikrotik_plain: bool,

    /// Run SNMPv3 test instead of normal agent operation
    #[arg(long)]
    snmpv3_test: bool,

    /// Device IP address (for --snmpv3-test)
    #[arg(long, required_if_eq("snmpv3_test", "true"))]
    snmpv3_ip: Option<String>,

    /// SNMPv3 username (for --snmpv3-test)
    #[arg(long, default_value = "")]
    snmpv3_user: String,

    /// SNMPv3 auth password (for --snmpv3-test)
    #[arg(long, default_value = "")]
    snmpv3_auth_pass: String,

    /// SNMPv3 priv password (for --snmpv3-test)
    #[arg(long, default_value = "")]
    snmpv3_priv_pass: String,

    /// Enable TUI mode (auto-detects TTY by default)
    #[arg(long, env = "TOWEROPS_TUI")]
    tui: Option<bool>,

    /// Force disable TUI even if TTY is available
    #[arg(long, env = "TOWEROPS_NO_TUI", default_value_t = false)]
    no_tui: bool,
}

fn main() {
    // Build Tokio runtime with larger stack size for SNMPv3 crypto operations
    let runtime = tokio::runtime::Builder::new_multi_thread()
        .enable_all()
        .thread_stack_size(8 * 1024 * 1024) // 8MB stack (default is 2MB)
        .build()
        .expect("Failed to build Tokio runtime");

    runtime.block_on(async_main())
}

async fn async_main() {
    let args = Args::parse();

    // Determine if TUI should be enabled (before initializing logger)
    let tui_enabled = should_enable_tui(&args);

    // Initialize logging (suppress stdout if TUI is enabled)
    init_logger(tui_enabled);

    // Handle MikroTik test mode
    if args.mikrotik_test {
        run_mikrotik_test(&args).await;
        return;
    }

    // Handle SNMPv3 test mode
    if args.snmpv3_test {
        run_snmpv3_test(&args).await;
        return;
    }

    tracing::info!("Towerops agent starting");

    // Check for newer Docker image version
    version::check_for_updates();

    // Start SNMP trap listener if enabled
    if args.trap_enabled {
        let trap_port = args.trap_port;
        tokio::spawn(async move {
            let (trap_tx, mut trap_rx) = tokio::sync::mpsc::channel::<snmp::SnmpTrap>(100);
            let trap_listener = snmp::TrapListener::new(trap_port);

            // Spawn the listener
            tokio::spawn(async move {
                trap_listener.run(trap_tx).await;
            });

            // Log received traps
            while let Some(trap) = trap_rx.recv().await {
                tracing::info!("{}", trap);
            }
        });
    }

    // Convert HTTP(S) URL to WebSocket URL
    let ws_url = convert_to_websocket_url(args.api_url.as_ref().unwrap());

    tracing::info!("WebSocket URL: {}", ws_url);

    // Shared connection state
    // Starts as false (not connected), updated when WebSocket connects/disconnects
    let connected = Arc::new(AtomicBool::new(false));

    // Create shutdown signal channel
    let (shutdown_tx, shutdown_rx) = watch::channel(false);

    // Spawn signal handler for graceful shutdown
    let shutdown_tx_clone = shutdown_tx.clone();
    tokio::spawn(async move {
        wait_for_shutdown_signal().await;
        tracing::info!("Shutdown signal received, initiating graceful shutdown...");
        let _ = shutdown_tx_clone.send(true);
    });

    // Setup TUI if enabled
    #[cfg(feature = "tui")]
    let (event_bus, _tui_handle) = if tui_enabled {
        use std::sync::Mutex;

        // Get hostname for TUI state
        let hostname = hostname::get()
            .ok()
            .and_then(|h| h.into_string().ok())
            .unwrap_or_else(|| "unknown".to_string());

        // Create event bus and shared state
        let event_bus = tui::EventBus::new(100);
        let agent_state = Arc::new(Mutex::new(tui::AgentState::new(
            hostname,
            env!("CARGO_PKG_VERSION").to_string(),
        )));

        // Spawn TUI task
        match tui::TuiApp::new(agent_state.clone(), event_bus.subscribe()) {
            Ok(mut tui_app) => {
                let shutdown_rx_clone = shutdown_rx.clone();
                let tui_handle = tokio::spawn(async move {
                    if let Err(e) = tui_app.run(shutdown_rx_clone).await {
                        eprintln!("TUI task failed: {}", e);
                    }
                    // When TUI exits (user presses 'q'), trigger shutdown
                    let _ = shutdown_tx.send(true);
                });

                (Some(event_bus), Some(tui_handle))
            }
            Err(e) => {
                eprintln!("Failed to initialize TUI: {}", e);
                eprintln!("Falling back to log mode");
                (None, None)
            }
        }
    } else {
        (None, None)
    };

    #[cfg(not(feature = "tui"))]
    let event_bus: Option<()> = None;

    // Retry loop with exponential backoff
    let mut retry_delay = Duration::from_secs(1);
    let max_retry_delay = Duration::from_secs(60);
    let mut attempt = 0;

    let token = secret::SecretString::new(args.token.as_ref().unwrap().clone());

    loop {
        // Check if shutdown was requested
        if *shutdown_rx.borrow() {
            tracing::info!("Shutdown requested, exiting main loop");
            break;
        }

        attempt += 1;

        if attempt > 1 {
            tracing::info!(
                "Retry attempt {} - waiting {} seconds before reconnecting",
                attempt,
                retry_delay.as_secs()
            );
            sleep(retry_delay).await;

            // Exponential backoff: double the delay, capped at max
            retry_delay = std::cmp::min(retry_delay * 2, max_retry_delay);
        }

        // Connect to Towerops server via WebSocket
        #[cfg(feature = "tui")]
        let mut client = match AgentClient::connect(&ws_url, &token, event_bus.clone()).await {
            Ok(client) => {
                tracing::info!("Successfully connected to server");
                // Mark as connected for health check
                connected.store(true, Ordering::Relaxed);
                // Reset retry delay on successful connection
                retry_delay = Duration::from_secs(1);
                attempt = 0;
                client
            }
            Err(e) => {
                tracing::error!("Failed to connect to server: {}", e);
                // Mark as disconnected for health check
                connected.store(false, Ordering::Relaxed);
                continue;
            }
        };

        #[cfg(not(feature = "tui"))]
        let mut client = match AgentClient::connect(&ws_url, &token).await {
            Ok(client) => {
                tracing::info!("Successfully connected to server");
                // Mark as connected for health check
                connected.store(true, Ordering::Relaxed);
                // Reset retry delay on successful connection
                retry_delay = Duration::from_secs(1);
                attempt = 0;
                client
            }
            Err(e) => {
                tracing::error!("Failed to connect to server: {}", e);
                // Mark as disconnected for health check
                connected.store(false, Ordering::Relaxed);
                continue;
            }
        };

        // Run the agent event loop with shutdown signal
        match client.run(shutdown_rx.clone()).await {
            Ok(()) => {
                // Clean shutdown requested
                if *shutdown_rx.borrow() {
                    tracing::info!("Agent shutdown complete");
                    break;
                }
            }
            Err(e) => {
                tracing::error!("Agent disconnected: {}", e);
            }
        }

        // Mark as disconnected for health check
        connected.store(false, Ordering::Relaxed);
        // Loop will retry with backoff (unless shutdown was requested)
    }

    tracing::info!("Towerops agent stopped");
}

/// Run SNMPv3 test
async fn run_snmpv3_test(args: &Args) {
    use snmp::V3Config;

    let ip = args.snmpv3_ip.as_ref().expect("--snmpv3-ip required");
    let username = &args.snmpv3_user;
    let auth_pass = &args.snmpv3_auth_pass;
    let priv_pass = &args.snmpv3_priv_pass;

    println!("Testing SNMPv3 device at {}...", ip);
    println!("  Username: {}", username);
    println!(
        "  Auth Password: {}",
        if auth_pass.is_empty() {
            "(empty)"
        } else {
            "(set)"
        }
    );
    println!(
        "  Priv Password: {}",
        if priv_pass.is_empty() {
            "(empty)"
        } else {
            "(set)"
        }
    );

    let v3_config = V3Config {
        username: username.clone(),
        auth_password: if !auth_pass.is_empty() {
            Some(zeroize::Zeroizing::new(auth_pass.clone()))
        } else {
            None
        },
        priv_password: if !priv_pass.is_empty() {
            Some(zeroize::Zeroizing::new(priv_pass.clone()))
        } else {
            None
        },
        auth_protocol: Some("SHA".to_string()),
        priv_protocol: Some("AES".to_string()),
        security_level: "authPriv".to_string(),
    };

    let snmp_client = snmp::SnmpClient::new();

    println!("\nTest 1: Get sysDescr.0 (1.3.6.1.2.1.1.1.0)");
    match snmp_client
        .get(
            ip,
            "",
            "3",
            161,
            "1.3.6.1.2.1.1.1.0",
            Some(v3_config.clone()),
        )
        .await
    {
        Ok(value) => println!("  Result: {:?}", value),
        Err(e) => println!("  Error: {}", e),
    }

    println!("\nTest 2: Get sysUpTime.0 (1.3.6.1.2.1.1.3.0)");
    match snmp_client
        .get(
            ip,
            "",
            "3",
            161,
            "1.3.6.1.2.1.1.3.0",
            Some(v3_config.clone()),
        )
        .await
    {
        Ok(value) => println!("  Result: {:?}", value),
        Err(e) => println!("  Error: {}", e),
    }

    println!("\nTest 3: Walk interfaces (1.3.6.1.2.1.2.2.1)");
    match snmp_client
        .walk(
            ip,
            "",
            "3",
            161,
            "1.3.6.1.2.1.2.2.1",
            Some(v3_config.clone()),
        )
        .await
    {
        Ok(values) => println!("  Found {} values", values.len()),
        Err(e) => println!("  Error: {}", e),
    }

    println!("\nTest complete.");
}

/// Run MikroTik API test
async fn run_mikrotik_test(args: &Args) {
    use mikrotik::MikrotikClient;
    use secret::SecretString;

    let ip = args.mikrotik_ip.as_ref().expect("--mikrotik-ip required");
    let port = args.mikrotik_port;
    let username = &args.mikrotik_user;
    let password = SecretString::new(&args.mikrotik_pass);

    println!("Connecting to MikroTik device at {}:{}...", ip, port);
    println!("  Username: {}", username);
    println!(
        "  Password: {}",
        if password.expose().is_empty() {
            "(empty)"
        } else {
            "(set)"
        }
    );

    // Quick TCP connectivity check first
    print!("  Testing TCP connectivity... ");
    match tokio::time::timeout(
        std::time::Duration::from_secs(5),
        tokio::net::TcpStream::connect(format!("{}:{}", ip, port)),
    )
    .await
    {
        Ok(Ok(_)) => println!("OK"),
        Ok(Err(e)) => {
            println!("FAILED");
            eprintln!("\nTCP connection failed: {}", e);
            eprintln!("Make sure the API-SSL service is enabled on the router:");
            eprintln!("  /ip service set api-ssl disabled=no");
            std::process::exit(1);
        }
        Err(_) => {
            println!("TIMEOUT");
            eprintln!("\nTCP connection timed out after 5 seconds.");
            eprintln!("Check network connectivity and firewall rules.");
            std::process::exit(1);
        }
    }

    let use_plain = args.mikrotik_plain;
    if use_plain {
        print!("  Connecting (plain TCP) and authenticating... ");
    } else {
        print!("  Establishing TLS and authenticating... ");
    }

    let connect_result = if use_plain {
        MikrotikClient::connect_plain(ip, port, username, &password).await
    } else {
        MikrotikClient::connect(ip, port, username, &password).await
    };

    let mut client = match connect_result {
        Ok(client) => {
            println!("OK");
            client
        }
        Err(e) => {
            println!("FAILED");
            eprintln!("\nError: {}", e);
            eprintln!("\nTroubleshooting tips:");
            if use_plain {
                eprintln!("  1. Verify the API service (non-SSL) is enabled:");
                eprintln!("     /ip service set api disabled=no");
            } else {
                eprintln!("  1. Verify the API-SSL service is enabled:");
                eprintln!("     /ip service set api-ssl disabled=no");
            }
            eprintln!("  2. Verify the username/password are correct");
            eprintln!("  3. Check if the user has API access permission:");
            eprintln!("     /user print");
            std::process::exit(1);
        }
    };

    println!("\nRunning /system/identity/print...");
    match client.execute("/system/identity/print", &[]).await {
        Ok(response) => {
            if let Some(err) = response.error {
                eprintln!("Command error: {}", err);
            } else if let Some(sentence) = response.sentences.first() {
                if let Some(name) = sentence.attributes.get("name") {
                    println!("Device identity: {}", name);
                } else {
                    println!("Response: {:?}", sentence.attributes);
                }
            } else {
                println!("No response data received");
            }
        }
        Err(e) => {
            eprintln!("Command failed: {}", e);
        }
    }

    println!("\nRunning /system/resource/print...");
    match client.execute("/system/resource/print", &[]).await {
        Ok(response) => {
            if let Some(err) = response.error {
                eprintln!("Command error: {}", err);
            } else if let Some(sentence) = response.sentences.first() {
                println!("System resources:");
                for (key, value) in &sentence.attributes {
                    println!("  {}: {}", key, value);
                }
            } else {
                println!("No response data received");
            }
        }
        Err(e) => {
            eprintln!("Command failed: {}", e);
        }
    }

    let _ = client.close().await;
    println!("\nTest complete.");
}

/// Wait for SIGTERM or SIGINT shutdown signal.
async fn wait_for_shutdown_signal() {
    #[cfg(unix)]
    {
        use tokio::signal::unix::{signal, SignalKind};

        let mut sigterm =
            signal(SignalKind::terminate()).expect("Failed to register SIGTERM handler");
        let mut sigint =
            signal(SignalKind::interrupt()).expect("Failed to register SIGINT handler");

        tokio::select! {
            _ = sigterm.recv() => {
                tracing::info!("Received SIGTERM");
            }
            _ = sigint.recv() => {
                tracing::info!("Received SIGINT");
            }
        }
    }

    #[cfg(not(unix))]
    {
        // On non-Unix platforms, just wait for Ctrl+C
        tokio::signal::ctrl_c()
            .await
            .expect("Failed to register Ctrl+C handler");
        tracing::info!("Received Ctrl+C");
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn test_convert_http_to_websocket() {
        assert_eq!(
            convert_to_websocket_url("http://localhost:4000"),
            "ws://localhost:4000"
        );
    }

    #[test]
    fn test_convert_https_to_websocket() {
        assert_eq!(
            convert_to_websocket_url("https://towerops.net"),
            "wss://towerops.net"
        );
    }

    #[test]
    fn test_websocket_url_unchanged() {
        assert_eq!(
            convert_to_websocket_url("ws://localhost:4000"),
            "ws://localhost:4000"
        );
        assert_eq!(
            convert_to_websocket_url("wss://towerops.net"),
            "wss://towerops.net"
        );
    }

    #[test]
    fn test_bare_domain_gets_wss() {
        assert_eq!(
            convert_to_websocket_url("towerops.net"),
            "wss://towerops.net"
        );
        assert_eq!(
            convert_to_websocket_url("localhost:4000"),
            "wss://localhost:4000"
        );
    }
}