Contact detail now searches for soundings in progressively wider radii
(150 → 300 → 600 → 1000 km) before declaring "No soundings found".
When even 1000 km turns up nothing, enqueue WeatherFetchWorker RAOB
jobs for every station at the widest non-empty radius. The worker
passes the contact_id through so it can PubSub back to
contact_enrichment:<id> as each sounding lands, and the LiveView
rehydrates without a refresh.
Also adds Weather.soundings_with_widening_radius/1 and
ContactWeatherEnqueueWorker.enqueue_raob_fetch_with_widening/1 so the
same logic can be reused from other callers.
Classifies every contact's likely non-LOS propagation mechanism and
persists the result on contacts.propagation_mechanism. Mechanism is
determined in priority order:
1. user_declared_prop_mode (ADIF PROP_MODE from the operator log)
2. EME — moon-ephemeris check, ≥2m band, >1800 km path
3. aurora — Kp≥5 + high-lat path, 50-432 MHz
4. sporadic-E — foEs × 5 ≥ band_mhz, 400-2500 km path
5. meteor_scatter — ±3 days of a shower peak, VHF/UHF
6. rain_scatter — common-volume radar heavy rain, 5-11 GHz ≤800 km
7. tropo_duct — HRRR native_best_duct ≥ band or ducting_detected
8. line_of_sight — ≤50 km path
9. troposcatter — default
Persisted via MechanismClassifyWorker (queue: :mechanism, unique on
contact_id). Submit-time enqueue path includes :mechanism by default;
BackfillEnqueueWorker cron now handles :mechanism alongside existing
types so prod continuously backfills any contact with
propagation_mechanism_status in (:pending, :queued, :failed). Also
added :radar to the cron's type list so common-volume radar backfill
runs automatically rather than only via `mix radar_backfill`.
New modules:
- Microwaveprop.Propagation.MoonEphemeris — Meeus low-precision moon
position, accuracy ±1° — enough for the mutual-visibility EME test
- Microwaveprop.Propagation.MechanismClassifier — plug-in priority
chain over the evidence map
- Microwaveprop.Workers.MechanismClassifyWorker — assembles inputs
from HRRR / native profiles / common-volume radar / solar_indices /
ionosonde + calls the classifier
ADIF importer now reads PROP_MODE into user_declared_prop_mode so
operator-tagged mechanisms (EME/ES/MS/RS/AS/AUR) become ground truth.
Status page NARR progress counted `hrrr_status = :unavailable` as the
candidate set, which swept in ~13.6K post-2014 HRRR retry rows and
showed "0 / 13,652". Candidate eligibility is qso_timestamp-based, not
hrrr_status-based — switch both the numerator and denominator to
`qso_timestamp < NarrClient.coverage_end()` so pre-2014 rows are
counted whether their hrrr_status is :queued, :unavailable, or
:complete.
ContactWeatherEnqueueWorker: short-circuit hrrr_points_for_contact/1
for pre-coverage timestamps and mark the contact :unavailable when no
HRRR jobs are built. Was producing a ping-pong where reconcile flipped
pre-2014 :queued → :unavailable and the same cron run flipped it back
to :queued from a rebuilt HRRR job that could never land data.
Post-2014 contacts with hrrr_status=:unavailable were being dispatched to
NARR, which 404s because NCEI's archive ends 2014-10-02. 14K of the 14.3K
candidates in prod are post-2014 — these are HRRR's responsibility.
- NarrClient.in_coverage?/1 returns true only inside 1979-01-01 → 2014-10-02
- narr_jobs_for_contact and maybe_enqueue_narr (contact_live) bail out of
coverage returning []
- BackfillEnqueueWorker.type_filter scopes :narr to qso_timestamp <
coverage_end so the cron doesn't keep picking post-2014 candidates
Swap the body of era5_jobs_for_contact/1 to enqueue NarrFetchWorker
instead of Era5FetchWorker, and snap qso_timestamp via
NarrClient.snap_to_analysis_hour/1 so it lands on a 3-hourly NARR
analysis slot (00/03/06/09/12/15/18/21 UTC) — NarrFetchWorker raises
on anything else.
The :era5 type key, the era5_jobs_for_contact function name, and
the era5_status field are kept as historical artifacts — they
still refer to the era5_profiles table, which is reused 1:1 by
NARR. A schema rename is a follow-up PR.
The CDS Era5* workers (Era5FetchWorker, Era5SubmitWorker,
Era5PollWorker, Era5MonthBatchWorker, Era5BatchClient) are now
unreachable from the live submission flow. They stay in tree until
the deletion follow-up PR.
- Replace %Struct{} with Struct.t() in all @spec annotations
- Replace length(x) > 0 with x != [] in test assertions
- Fix multi-line spec struct references in weather.ex
The Era5FetchWorker now declares an Oban unique constraint on
{lat, lon, valid_time} for any job in available/scheduled/executing/
retryable, so two backfill runs targeting the same contact grid point
can no longer spawn parallel CDS requests for the same hour.
Because Oban OSS insert_all doesn't honor unique, ERA5 jobs are now
routed through Oban.insert/1 from ContactWeatherEnqueueWorker and the
era5_backfill mix task. Other worker types still use insert_all.
Backfill dashboard now has checkboxes to select which enrichment types
to process (HRRR, Weather, Terrain, IEMRE). Prevents weather jobs from
flooding the queue when only HRRR needs work.
enqueue_for_contact unconditionally marked contacts as :queued even
when no HRRR jobs were needed (profiles already exist). Workers never
updated contact status to :complete after storing profiles. Contacts
got stuck and were never re-processed.
- Mark :complete when no jobs generated (data already exists)
- Include :queued in backfill enrichable states for reconciliation
- Fix score_pressure crash on nil pressure_mb (coastal HRRR points)
- Set 10-min timeout on grid score upsert transaction (was :infinity)
- Single DELETE for prune_old_scores instead of N queries in a loop
- Remove dead load_hrrr_refractivity that loaded 95k rows into nil map
- Pass selected_time to point_detail to skip latest_valid_time sub-query
- Batch station existence checks (1 query per path point, not per station)
- Batch solar index upserts via insert_all in chunks of 500
- Batch backfill_distances via single UPDATE FROM VALUES statement
- Add is_grid_point boolean + partial index to hrrr_profiles (replaces
non-sargable modular arithmetic filter on every weather map query)
- Add partial index on contacts(qso_timestamp) WHERE pos1 IS NOT NULL
- Move backfill enqueue to Oban worker so UI returns immediately
- Migration renames table, column, all indexes, and FK constraints
- Contact schema now references "contacts" table
- TerrainProfile foreign key renamed from qso_id to contact_id
- All code and tests updated to use contact_id
- Radio.ensure_positions!/1 computes pos1/pos2/distance from grids
- Called in contact show page mount and enqueue_for_contact
- Migration backfills positions for existing contacts missing them
- Migration corrects enrichment statuses based on actual data presence
- Backfill dashboard includes contacts with grids but no positions
Rename all modules, functions, variables, routes, and UI text from
qso/qsos to contact/contacts. Database table stays as "qsos" to avoid
migration. Add /qsos -> /contacts redirects for old URLs.
