The grid-cached profile is trimmed to 13 levels (1000→700 mb) for
memory reasons, so the skew-T plot showed nothing above 700 mb.
HrrrClient.fetch_profile/4 now accepts a forecast_hour opt; SkewtLive
issues a per-point fetch against the same cycle the cached row came
from to get the full 1000→100 mb set, falling back to the cached
truncated cell on any failure.
Time selection no longer round-trips through the URL — `select_time`
updates state in-process and triggers a focused :load_skewt_time
async, so refreshing or sharing a /skewt?q=... link always lands on
the most recent analysis hour.
URL-parameter loads (`/skewt?q=…`) were blocking the initial mount
on three serial steps: geocoder/grid resolve, ProfilesFile or
HrrrProfileLookup read, and the SkewtParams/SoundingParams/SkewtSvg
derivation. The address path in particular hits an external API,
which made the page take "forever" to load on first paint.
Restructure SkewtLive so the page chrome (header, search bar) renders
synchronously on mount, and the heavy work runs in a single
`start_async(:load_skewt, …)` task that calls SkewtLocationResolver,
walks the on-disk profile store with a DB fallback, and produces the
SVG. A new `loading?` assign drives a small spinner + "Resolving
location and loading HRRR profile…" message that shows while the task
is in flight; previous data stays on screen so navigation between
forecast hours doesn't blank out the diagram.
handle_async/3 covers three landings:
* `{:ok, {:ok, result}}` — apply assigns from the resolver
* `{:ok, {:error, reason}}` — surface as the existing error alert
(geocoder failure, unknown callsign, etc.)
* `{:exit, reason}` — log a warning and show a generic retry message
start_async/3 cancels any prior task with the same name on each call,
so a rapid-fire URL patch (e.g. clicking through forecast-hour
buttons before the first response returns) never lands stale data.
Tests: extended SkewtLiveTest from 3 to 4 cases — the URL-param
initial render now asserts the chrome + spinner appear pre-async,
and a separate case `render_async/2`s the view to confirm the
location label arrives once the task completes. 4/4 green.
Three additions that bring the diagram closer to the SPC sounding
viewer's full-information chart:
* Wet-bulb temperature trace, plotted as a thinner blue line under
the dewpoint trace. Comes from a Stipanuk-style bracket between
the level's dewpoint and dry-bulb temperatures (already used by
`SkewtParams` for the wet-bulb-zero level — now public so the
renderer can call it per level).
* Environment virtual-temperature trace and parcel virtual-T
trajectory, both as thin pinkish dashed lines. The parcel
virtual-T is the actual buoyancy curve CAPE integrates against,
so showing it next to the dry-bulb parcel ascent makes the
moisture correction visible. New `SkewtParams.virtual_temp_c/2`
and `/3` helpers, plus `SkewtParams.mixing_ratio/2`.
* Critical-level rail on the right edge. Each of LCL / LFC / EL /
0 °C / WBZ that resolves on the current profile gets a short
horizontal tick at the right of the plot and a `<label> <p> mb`
tag just outside it — matches the SPC chart's `143 mb (mix)` /
`158 mb (mix)` annotation column. SkewtLive computes the
pressures (and converts the height-keyed 0 °C and WBZ from
SkewtParams back to pressure via `pressure_at_height/2`) before
handing them to `SkewtSvg.render/2`.
Wind-derived overlays (hodograph, wind barbs) remain off — HRRR
profile data is wind-free above 10 m AGL.
mix test: 27 / 27 across the four /skewt-related test files,
2,902 / 2,902 + 221 properties on the full suite. mix credo --strict
clean (one cyclomatic-complexity refactor extracted along the way).
Two changes that bring /skewt visually and analytically into parity
with the NOAA SPC sounding viewer
(https://www.spc.noaa.gov/exper/soundings/):
NOAA-style line set
-------------------
Updated the SkewtSvg style block to match the public SPC chart:
* Temperature trace ........ pure red (#ff0000) at 2.5 px stroke
* Dewpoint trace ........... pure green (#00aa00) at 2.5 px stroke
* Isotherms ................ dashed teal (#14b8a6)
* Dry adiabats ............. solid orange (#f59e0b)
* Moist (saturated) adiabats dashed sky-blue (#38bdf8)
* Mixing-ratio lines ....... dotted darker green (#16a34a), with
labels at 700 mb showing the g/kg
value, drawn only below 600 mb (matches
the SPC chart's lower-band number row)
* Parcel ascent ............ new dashed grey (#475569) line, drawn
whenever SkewtParams.derive returns a
non-empty parcel_trace
The mixing-ratio set is the SPC standard (0.4 / 0.7 / 1 / 2 / 3 / 5 /
8 / 12 / 16 / 20 g/kg) instead of the prior arbitrary set.
SkewtParams: SPC parcel-theory + indices module
-----------------------------------------------
New `Microwaveprop.Weather.SkewtParams` derives the parameter set that
ships in the SPC `*.txt` companion file:
* LCL pressure / temperature / height (Bolton 1980 eq 22)
* LFC pressure / height
* EL pressure / height
* SBCAPE, SBCIN (J/kg, virtual-temperature integration with
surface parcel)
* 3 km CAPE
* Lifted Index (parcel ↔ environment T at 500 mb)
* Freezing level (T = 0 °C height) and Wet-Bulb Zero
* DCAPE (downdraft CAPE — picks the min-θₑ source level in
400–700 mb, descends moist-adiabatically to surface)
* Layer lapse rates: sfc–3 km, 700–500 mb, 850–500 mb
* `parcel_trace` — pressure/temperature trajectory used by
SkewtSvg to draw the dashed parcel-ascent overlay
Wind-derived indices (SRH, BWD, Bunkers motion, SCP, STP, SHIP) are
deliberately *not* produced and the LiveView surfaces a one-line note
explaining why: HRRR persists wind only at 10 m AGL, so per-pressure-
level shear can't be computed from this data source.
LiveView panel restructured into grouped sections (Surface, Convective
parcel, Levels, Lapse rates, Moisture/stability, Refractivity) so the
layout matches the SPC viewer's order. The Levels rows show pressure
*and* height ("872 mb · 1,140 m") for quick cross-reference between
the diagram axis and the readout.
Tests: 8/8 new SkewtParamsTest cases (LCL Bolton check, saturated-air
edge case, full field-set presence, summer profile produces SBCAPE > 0
and LI < 0, capped profile produces SBCAPE = 0 and LI > 0, freezing
level interpolated correctly, sfc–3 km lapse rate, empty profile no
crash). 25/25 across all skewt-related test files. mix test green
(2,902 / 2,902 + 221 properties), mix credo --strict clean, mix
assets.build clean.
Two follow-ups to the earlier /skewt work:
1. Interactive crosshair (matches the SPC-viewer feel from the
reference screenshot). Mousing over the diagram now drops a
horizontal pressure cursor with a top-left readout box showing the
pressure at the cursor's altitude (mb), the height in m and ft,
and the linearly interpolated temperature and dewpoint at that
level. Two coloured dots track the T and Td traces along the
cursor so the user can read the spread visually.
Mechanics: SkewtSvg.geometry/0 exposes the plot geometry (left,
right, top, bottom, p_bottom, p_top, t_min, t_max, skew) as JSON;
SkewtSvg emits an initially-hidden <g class="skewt-cursor"> layer.
A new Skewt hook in assets/js/app.ts inverts pressure_y to recover
pressure from the cursor's viewBox-Y, walks the (descending-pres-
sorted) profile to interp T/Td/height, and updates the elements.
The hook also handles mouseleave to hide the cursor and uses the
SVG's screen-CTM so the math stays correct under any container
aspect-ratio resize.
2. DB fallback for `available_valid_times`/`load_profile`. When the
on-disk `ProfilesFile` has nothing for the location-and-window
(true on dev, transient on prod between chain runs), SkewtLive
now falls back to `HrrrProfileLookup.{list_valid_times_near,
read_point_near}/3` against the `hrrr_profiles` Postgres table.
The lookup uses the same ±0.07° spatial tolerance and the
`(lat, lon, valid_time)` unique index that `Weather.find_nearest_
hrrr/3` already relies on, so the queries are index-only.
Returned shape matches `ProfilesFile.read_point/3` so SkewtLive
reads from either source transparently. NaiveDateTime → UTC
normalisation is centralised in `ensure_utc/1` so the LiveView
sees `%DateTime{time_zone: "Etc/UTC"}` regardless of which side
produced the value.
Tests: 6/6 new HrrrProfileLookupTest cases (list/limit/tolerance,
read nearest cell, nil for far cells, picks closest among matches),
3/3 SkewtLiveTest still green, 2,894 total Elixir tests + 221
properties green via mix test (one pre-existing flaky test in
admin/contact_edit_live re-runs clean). mix credo --strict clean.
mix assets.build clean.
The /skewt page was empty in prod because Phase 2 of the Rust cutover
moved f01..f18 grid scoring to Rust but left profile-file writing only
on the analysis (f00) path. Result: /data/scores/profiles/ accumulated
one file per chain run instead of nineteen, so SkewtLive only ever saw
the analysis hour — and that hour falls outside the 1 h past cutoff
within an hour of the chain finishing, leaving the page empty most of
the time.
Two surgical fixes:
* `pipeline::run_chain_step` now builds `profile_entries` alongside
`prepared` from the merged grid in a single iter pass, then spawns
`profiles_file::write_atomic` on the blocking pool to overlap the
NFS write with the score-band scoring/write fan-out — same pattern
`run_analysis_step` already uses. `ChainStepStats` gains
`profile_cells_written` so the worker log line is symmetric with
the analysis step's existing field and a future failure mode that
drops the profile would show up as a divergence.
* `SkewtLive.available_valid_times/0` widens the past cutoff from
1 h to 3 h. The chain's analysis hour can be ~70 min old by the
time the next chain finishes (and ~2 h on a missed cycle), so the
1 h cutoff was leaving the page blank during normal transients.
18 h forward window unchanged.
Cosmetic: cargo fmt picked up trivial rewrites in decoder/fetcher/
native_duct/hrrr_point_worker that had drifted; rolled in.
Verification: cargo build --release, cargo clippy --lib --bins -D
warnings, cargo test --lib (134/134), mix test
test/microwaveprop_web/live/skewt_live_test.exs (3/3) all green.
Single search bar accepts an address, Maidenhead grid square, or
callsign; resolves it to lat/lon via Geocoder / Maidenhead /
CallsignLocation (cheapest classification first), snaps to the HRRR
grid via the existing ProfilesFile reader, and renders an SVG
Skew-T-Log-P with isobars, skewed isotherms, dry/moist adiabats, and
mixing-ratio lines. A button row picks between every available
forecast hour (now → f18); default is the most recent analysis.
Right pane lists derived stability and refractivity stats from
SoundingParams.derive (PWAT, BL depth, K-index, lifted index, min
dN/dh, ducting status + per-duct base/top/ΔM).
Renderer is server-side SVG so the page works without JS and serializes
into the LiveView payload as a single tag. Wind barbs are deliberately
omitted — HRRR's persisted profile carries wind only at 10 m AGL.
