- Add one-line moduledocs to 18 LiveViews that were carrying
@moduledoc false. Each line names the route and summarizes what
the page does so a future reader knows where to look before
opening the file.
- Add MapLive handle_event tests for toggle_radar, select_time /
set_selected_time, point_detail, map_bounds, retry_initial_scores.
Assertions focus on socket-state transitions and "didn't crash"
rather than raw HTML — map_bounds in particular has no visible
render-side effect (it push_events the new scores to the JS hook).
- Rust pipeline: integration-shaped test that hand-builds a 2-cell
surface + pressure grid, runs merge → cell_to_conditions →
precompute_band_invariants → composite_score_with → write_atomic
→ decode, asserting header + body length round-trip. Closes the
'pipeline's happy path is only covered by unit tests' gap.
Band toggles previously roundtripped through LiveView and rebuilt every
polyline + popup + hover handler on each click. Now the hook builds one
L.LayerGroup per band once after the initial fetch; toggling is just
addLayer/removeLayer on the map (O(bands), not O(contacts)). Checkbox
and All/None events are handled directly in the hook via delegated
document listeners — no LV roundtrip. Callsign filter still roundtrips
(debounced) since it's cross-cutting, and now iterates pre-built
polylines without recreating them.
The US 9cm amateur allocation was cut from 3300-3500 to 3300-3450 MHz
in 2020, so 3456 (the legacy weak-signal calling frequency) is no
longer in-band. Move the canonical key to 3400, migrate existing
contacts, and keep 3456 input resolving to 3400 via the
nearest-band snap so historical ADIF/CSV logs still import cleanly.
Profile page:
* New MicrowavepropWeb.UserProfileLive at /u/:callsign is a public
page showing a user's contacts and beacons. Resolves case-
insensitively so /u/w5isp and /u/W5ISP are the same thing; unknown
callsigns redirect to /. Uses daisyUI card / stats / table
components with an avatar-placeholder initial and hero icons.
* Accounts.get_user_by_callsign/1 (case-insensitive) plus
Radio.list_contacts_for_user/1 and Beacons.list_beacons_for_user/1
back the page. Beacons list includes both approved and pending so
owners see their drafts.
* The top nav bar and the three LiveView sidebars (MapLive,
WeatherMapLive, ContactMapLive) now render the logged-in callsign
as a navigate link to /u/:callsign instead of a static label.
* Nine new tests cover the lookup, the LiveView render, and the
ownership-scoped queries.
Flexible band input:
* New Microwaveprop.Radio.BandResolver module converts any of:
ADIF wavelength labels ("33cm", "1.25cm", "6mm", case/whitespace
insensitive), numeric frequency strings ("903.100", "10368.000"),
and canonical MHz integers into the one of the site's known bands.
Returns the nearest allowed band for numeric inputs >= 900 MHz,
nil otherwise.
* 902 MHz is added to Contact.@allowed_bands, ContactEdit.@allowed_bands,
AdifImport.@allowed_bands, and the BandResolver list so "33cm"
round-trips end-to-end.
* AdifImport and CsvImport now delegate band resolution to
BandResolver, and Radio.create_contact/2 normalizes the :band attr
on the way in so the manual form and any API callers benefit too.
CsvImport's "invalid band" tests previously used 99999 MHz which
the new resolver snaps to the nearest allowed band; swapped to
"notaband" which is truly unresolvable.
Contacts and beacons list UX:
* Remove the "Submitted" column from /contacts — it duplicated info
already visible on the detail page and was pushing the real
columns off narrow viewports. submitted_cell/1 and its three
column-specific tests go with it.
* Hide the Lat / Lon columns from /beacons — six decimal places of
coordinates weren't useful next to the grid square and took a
disproportionate amount of row width.
Adds Microwaveprop.Propagation.AsosNudge: a pure IDW bias-field module
that takes ASOS observations + HRRR profiles and returns re-scored grid
rows for every cell within 250km of a reporting station. Upper-air
fields (min_refractivity_gradient, pwat_mm, hpbl_m, profile, duct
metadata) pass through unchanged so HRRR's signal isn't clobbered.
The old AsosAdjustmentWorker was unwired and buggy — nil'd out ~22% of
the scoring weight and wrote orphan timestamps. Replaced with a slim
worker that queries the latest HRRR valid_time, fetches live ASOS
currents, calls AsosNudge.compute/3, and upserts onto
(lat, lon, valid_time, band_mhz) so nudged values overwrite the HRRR
hour cleanly instead of polluting available_valid_times. After each
upsert it warms ScoreCache and broadcasts propagation:updated so live
/map clients refresh.
Cron hooked up every 10 minutes in config.exs and dev.exs. Also cleaned
up the stale "dev has propagation disabled" note in CLAUDE.md.
13 new AsosNudge unit tests cover: residual computation (co-located,
out-of-grid, nil fields), IDW weighting (single station, far station,
two equidistant stations, nil component handling), upper-air
preservation, and the compute/3 entry point's shape and radius filter.
Drive-by Styler formatting touched a handful of unrelated files from
`mix format`.
- Add ContactMapController serving /api/contacts/map with pre-gzipped
JSON from Microwaveprop.Cache. Browsers handle Content-Encoding: gzip
natively; payload drops from 5.7 MB raw to 1.5 MB on the wire (73%).
Cache TTL 10 min, invalidated on contact insert alongside the other
contact-map cache keys.
- Move contact map payload out of the LiveView's initial HTML entirely.
Shell renders with the filter chrome (count + band list); the hook
fetches contacts from the HTTP endpoint in parallel with map init.
This also avoids Phoenix.Socket's 64 KB frame limit (push_event would
have required chunked transfer or a global frame size bump).
- Parallelize ContactLive.Show hydrate: five independent DB loads
(weather, solar, hrrr_path, terrain, iemre) now run concurrently via
Task.async + Task.await_many. Total latency drops from sum(each) to
max(each), cutting contact show hydrate time roughly 5x.
- Add contacts_inserted_at_desc_id_desc_idx so /contacts list runs as an
Index Scan (~0.4ms) instead of a Seq Scan + top-N heapsort (~77ms on
58k rows)
- Add Microwaveprop.Cache: tiny ETS-backed TTL cache for memoizing
expensive-but-stale-tolerant values
- Cache total_entries for unsearched /contacts page loads (30s TTL,
invalidated on insert)
- Cache the entire /contacts/map payload (pre-encoded JSON + band list),
moving load_contacts into Radio.contact_map_payload; invalidated on
new contact insert. Mount goes from ~150-300ms to ~5ms.
- Fix /map overlay blinking on load: reuse the Leaflet GridLayer across
renderScores calls and just redraw() against the updated ScoreGrid,
instead of removeLayer + new layer which flashed between tile regens
- Make mode optional on submission: schema change (null: true),
submission_changeset no longer requires it, blank strings normalise to
nil, CSV import accepts 6-column (no mode) or 7-column layouts
- core_components .input adds a red asterisk to labels when required,
giving users a visual cue for which fields must be filled on /submit
Aliases: add module aliases for 9 nested module references
Apply: replace apply/3 with direct module attribute calls
Line length: break 1 long spec line
Refactoring: extract helpers to reduce complexity and nesting
in show.ex, radio.ex, weather workers, terrain, duct detection,
backfill dashboard, contact map, and mix tasks
Replace the JS-built Leaflet control panel with a server-side
sidebar (desktop) and mobile floating controls. Band checkboxes,
callsign filter, and nav links now match the main propagation map
layout. Filter state managed by LiveView, pushed to JS via events.
Registered users can suggest edits to any contact's core fields
(callsigns, grids, band, mode, timestamp). Edits enter an admin
approval queue with field-by-field diff view. On approve, changes
are applied and enrichment re-enqueued if grids/band changed.
Users receive email notification on approve or reject.
Also updates dependabot.yml for mix ecosystem.
- Callsign input filters contacts where either station matches
(case-insensitive substring match, debounced 300ms)
- Band checkboxes now show per-band count of visible contacts
- All/None buttons for quick band selection
- Header count updates dynamically with filters
- Complete rewrite: rebuilds map on any filter change instead of
toggling individual layers (simpler, handles cross-filter correctly)
- Leaflet map on contact detail pages showing both station locations
- SRTM elevation profile with Chart.js: terrain, LOS, Fresnel zone
- Path info: distance, azimuth, elevation angle in both directions
- Compact 4-column grid layout for contact details
- Contact map page with all contacts plotted
- Rename QSOs to Contacts in page header
- Wrap algo page in standard layout
