Flip the cron from every-3-hours to every-hour now that a full
f00-f18 chain runs in ~45-60 min instead of ~170 min. With the
:propagation queue's concurrency-of-2, a slow chain won't block
the next one — they interleave, and the file store's last-writer
-wins semantics give the newer run_time's analysis data naturally.
Add ScoresFile.retain_window/2 that deletes any file whose
valid_time falls outside [run_time, run_time + 18h]. Call it at
fh=18 of the chain so leftover files from the previous chain
(specifically the old f00 whose valid_time the new chain doesn't
overwrite because it advanced by one hour) are discarded
immediately instead of waiting for the 2h prune cron.
The step transition path is extracted to handle_step_transition/2
to keep the nesting under credo's limit and make the final-step
logic easier to read.
Full cutover: the propagation_scores Postgres table is gone, and
the binary files under /data/scores are the sole source of truth
for the map render path. Three stacked changes:
1. New migration drops the propagation_scores table and its indexes
(the earlier tuning migrations for it were already applied and
are now no-ops against a missing table, which is fine — Ecto
just runs them on fresh environments).
2. Propagation context is gutted of every GridScore reference.
replace_scores/2 writes files only. upsert_scores/2 is deleted.
load_scores_from_db, available_valid_times_from_db,
point_detail_from_db, point_forecast_from_db, fetch_factors,
coalesce_factors, the Postgres side of prune_old_scores, and
the Postgres fallbacks in latest/earliest_valid_time are all
removed. point_detail always returns an empty factors map now
since factor breakdowns were retired with the table.
3. Deleted modules:
- Propagation.GridScore (the schema)
- Propagation.ScorerDiff (read factors from the table)
- Propagation.AsosNudge (helper for AsosAdjustmentWorker)
- Workers.AsosAdjustmentWorker (its cron was already disabled)
- Mix.Tasks.ScorerDiff (wrapper around the deleted module)
And their tests. AdminTaskWorker's scorer_diff task is a
logging no-op so any queued Oban rows drain cleanly.
Release.scorer_diff stays as a stub that tells the operator.
propagation_prune_worker_test rewritten to exercise ScoresFile
pruning. propagation_test.exs rewritten to use replace_scores +
ScoresFile throughout (no more GridScore / upsert_scores paths).
PropagationGridWorker.merge_commercial_link_data/2 called
Commercial.link_degradation_at twice per grid cell (once to count,
once to merge), and each call re-ran enabled_links plus two sample
queries per in-range link. That was ~500k SQL queries per forecast
hour — fine for the DB but catastrophic for log volume in dev
iex sessions trying to watch a chain step run.
Split into two new functions:
* build_link_lookup/2 does all the DB work up front — one
enabled_links query + one link_degradation per enabled link
(~10 queries total).
* link_degradation_from_lookup/3 is pure: takes a (lat, lon)
and the precomputed lookup, returns the aggregate or nil.
The worker now calls build_link_lookup once per forecast hour and
the per-cell path is haversine-only. Net: 500k queries → ~10.
PipelineStatus freshness detection moves off oban_jobs.completed_at
onto ScoresFile.latest_valid_time(). The on-disk files ARE the data
the map renders from, so the chip's "Up to date · Nm ago" and the
2h stale threshold now track actual data presence. Running-state
detection still comes from oban_jobs since the chain step is still
an Oban row. Tests updated to seed a ScoresFile instead of a
completed Oban row for the idle/stale cases.
Read-side cutover for the binary scores store and a companion
cleanup that removes the biggest remaining DB write from the hot
path.
Propagation.scores_at/3, available_valid_times/1, latest_valid_time/0,
latest_valid_time/1, earliest_valid_time/1, point_detail/4, and
point_forecast/3 all now prefer ScoresFile and fall back to the
propagation_scores table when a file is missing. The map render
path reads from /data/scores first; Postgres stays as a safety
net while dual-write is on. point_detail still pulls factors from
Postgres (analysis-hour rows only) and coalesces nil to an empty
map so the JS popup iterates cleanly.
replace_scores/2 is now gated by a postgres_writes_enabled? flag
(runtime env MICROWAVEPROP_SCORES_POSTGRES=false, or the
:propagation_scores_postgres app env key) so the binary-only path
can be benchmarked locally without the DB insert. Default stays
true.
PropagationGridWorker no longer calls store_hrrr_profiles —
persisting 92k grid rows × 19 forecast hours of JSONB profiles
was ~12 min of wall time per chain for a table only
AsosAdjustmentWorker read from. Per-contact HRRR enrichment
through HrrrFetchWorker still writes its own (is_grid_point:
false) rows. AsosAdjustmentWorker is disabled in all three cron
configs since its data source is gone.
DataCase resets the scores tree between tests so per-test
ScoresFile writes don't leak across cases, and ScoresFileTest
switches to async: false because it mutates the global
:propagation_scores_dir env.
First step of the disk-backed scores migration from the DuckDB plan
doc. Ended up shipping the raw-binary variant instead of Parquet
because the data is disposable after ~2h — the ecosystem benefits
of Parquet only pay off for long-lived datasets, and the binary
path has zero new dependencies.
Microwaveprop.Propagation.ScoresFile writes one file per
(band_mhz, valid_time) tuple under the configured scores dir,
default /data/scores in prod and priv/dev_scores in dev. Layout is
a 33-byte header plus a dense n_rows × n_cols uint8 array (255 is
the no-data sentinel). The whole CONUS grid serializes to ~93 KB
per band, and writes use the temp-then-rename pattern so NFSv4
concurrent readers never see a partial file.
Propagation.replace_scores/2 now materializes the score stream
once and dual-writes: Postgres on the primary path, then one
ScoresFile per band as a best-effort follow-up (any file error is
logged but doesn't fail the DB write, so we can verify the file
path in prod before cutting readers over).
Propagation.prune_old_scores/0 also clears expired score files so
the existing 15-minute prune cron covers both storage layers.
Dev configuration points at priv/dev_scores/, added to .gitignore.
Test configuration points at a per-run tmp directory.
The :propagation Oban queue runs with concurrency 2, so the grid
worker chain step and the 10-minute ASOS nudge can (and do) execute
in parallel. PipelineStatus.current/0 used to return only the
most-recently-started worker, which made the chip label flip to
"ASOS nudge" at every :00 / :10 tick even though HRRR was still
chugging through forecast hours behind it.
Replace the single :detail field with a list of running_detail
maps, each tagged with :grid or :asos so the chip can:
- Render one sub-line per currently-executing worker
- Sort them deterministically (grid before asos) so the eye
doesn't see rows swap
- Still override the grid entry with the forecast-hour progress
label when a propagation_pipeline_progress broadcast arrives
The scoring+upsert phase was ~4m40s per forecast hour and dominated
wall time. Three stacked optimizations attack it from different
angles.
replace_scores/2 is a new hot-path writer that does DELETE WHERE
valid_time = $1 followed by a plain insert_all (no ON CONFLICT
resolution). The chain worker rewrites the full (valid_time, all
bands) slice every forecast hour, so conflict detection was pure
waste. AsosAdjustmentWorker still uses upsert_scores because it
only rewrites the subset of cells near a station.
factors is now nullable. Forecast hours f01-f18 pass factors: nil
so the JSONB encode + toast write is skipped entirely — roughly
halves the data volume per run. point_detail/4 coalesces nil to
an empty map so the JS popup renders without a TypeError, and
scorer_diff only pulls the most recent valid_time that still has
factors (the f00 row).
propagation_scores is now UNLOGGED, so inserts bypass WAL entirely.
Durability tradeoff: an unclean shutdown truncates the table, but
PropagationGridWorker rebuilds it from HRRR every 3h so a lost
table is re-populated within one cron cycle.
Also adds docs/plans/2026-04-14-duckdb-scores-storage.md — a
speculative plan for a flat-file / DuckDB rewrite with explicit
trigger conditions for when to pick it up (partitioning deferred
too; revisit only if these three don't solve it).
Era5SubmitWorker was counting era5_cds_jobs rows 1:1 against the CDS
150-job ceiling, but each row holds TWO CDS job IDs (single-level +
pressure-level). Prod hit 74 rows = 148 in-flight jobs and got stuck
in a reject→resubmit spiral. The cap guard now multiplies row count
by 2 to match what CDS sees.
Era5PollWorker @stuck_after_seconds goes from 4h to 18h. CDS
single-level routinely sits at 'accepted' for 12+h under load while
pressure finishes in ~90 min; the 4h threshold was firing on normal
slow runs and feeding the same spiral.
PipelineStatus now returns `label` + `detail` separately so the map
chip can render "Updating propagation" on one line and the
sub-detail ("HRRR run" / "ASOS nudge" / "+3h" / "now") on a second
line below it. running_label/1 is renamed to running_detail/1 and
returns just the sub-part.
PropagationGridWorker now broadcasts a {:propagation_pipeline_progress,
%{forecast_hour:, valid_time:}} message on the propagation:pipeline
PubSub topic at the start of each process_forecast_hour/4 call.
MapLive subscribes on mount, stashes the last message in the new
:pipeline_progress assign, and clears it on the refresh tick whenever
PipelineStatus flips out of :running.
The chip component consults a new PipelineStatus.running_label/1
helper that formats the payload as "Updating propagation · now" for
f00 and "Updating propagation · +Nh" for f01-f18, falling back to
the base running label until the first progress message arrives.
Covered by unit tests on the formatter and an integration test in
MapLiveTest that seeds an executing grid job, broadcasts progress,
and asserts the rendered chip.
The running label "Updating propagation (HRRR run)" didn't fit in
the 224 px desktop sidebar alongside the NTMS title block, so it
was being truncated. Move the chip to the bottom of the sidebar
(below the auth menu) where it can use the full sidebar width,
let the text wrap naturally instead of truncating, and drop the
trailing ellipsis. Mobile chip stays at the top since the mobile
layout collapses menu + auth into a dropdown.
Adds a small chip below the NTMS title in both the mobile and
desktop sidebars of /map that collapses PropagationGridWorker +
AsosAdjustmentWorker Oban state into one of four states —
running / idle / stale / unknown — with a plain-language label
("Updating propagation (HRRR run)…", "Up to date · 12m ago").
The chip refreshes on a 15s timer and whenever the pipeline
broadcasts propagation:updated, so a long HRRR sweep is visible
from the moment a visitor opens the page.
Three signal sources we already collect but weren't using:
* NEXRAD composite reflectivity → rain rate via Marshall-Palmer, taken
as max of HRRR-derived and NEXRAD-derived rate so fast convective
cells between HRRR hourly analyses can still trigger the rain penalty.
Only active on f00 — forecast hours can't see future radar. New
Scorer.dbz_to_rain_rate_mmhr/1 with 5 dBZ noise floor and 150 mm/hr
hail-safe ceiling.
* hrrr_native_profiles.best_duct_band_ghz → Scorer.score_refractivity/4
applies a 1.15× boost when the cell's native-resolution duct supports
the target band's frequency. HRRR pressure-level gradients
systematically under-read thin trapping layers the native profile can
resolve. Sub-band ducts do NOT boost — they're evidence that the
gradient we have is all there is at the target frequency.
* Commercial LOS link rx_power fading → inverse tropo sensor.
Commercial.link_degradation_at/3 computes the average 7-day-baseline
vs current delta across enabled links within 75 km, ignoring links
where link_state != 1. Scorer.commercial_link_boost/2 adds +2 to +25
to the composite score for 3+ dB of fading. ~150 km radius around
DFW is the only zone this helps today, but it's the first *measured*
signal in the algorithm vs the model-derived proxies.
Also fix a latent test bug exposed by the earlier ERA5 poll-timeout
bump: era5_batch_client_test's "uncached path returns error" tests
hung for up to an hour when run with direnv's real CDS key. New
describe-level setup explicitly unsets the env var so the tests stay
hermetic.
1,359 tests, 0 failures.
Direct queries against prod (75M HRRR profiles, 16,864 soundings, 392k
surface obs, new hrrr_native_profiles table) drive these changes:
* Reinstate shallow-BL bonus as an HPBL multiplier on the refractivity
score (1.10× <200m → 0.78× ≥2000m). The Apr 11 "shallow BL bonus
removed" conclusion was an artifact of the prior matching strategy;
with the cleaner contact↔HRRR join (n=680) the binned data goes 230 km
avg at HPBL <200m vs 100 km at ≥2000m, monotonic across all bins.
* Add 6 missing bands (142, 145, 288, 322, 403, 411 GHz) so contacts in
those bands stop being silently dropped. Coefficients extrapolate
ITU-R P.676/P.838 trends from the existing 134/241 GHz entries.
* Bump ERA5 poll timeout 10 min → 1 hour and Era5MonthBatchWorker
max_attempts 3 → 5 so CDS slowness stops discarding tiles. Also dump
the full failure body when CDS omits the message field — the prior
"ERA5 job failed: nil" was masking real error reasons in oban_jobs.
* Add scripts/recalibrate_algo.py so this analysis can be re-run any
time new data lands without manual SQL. Reads PROP_PROD_DB_URL from
.envrc, drops a Markdown report into docs/algo-reports/.
* Append a dated Part 2c to algo.md documenting the corpus expansion,
the honest accounting of historical HRRR coverage (only ~1,020 of 58k
contacts are precision-matchable), and the empty era5/rtma/climatology
tables. Update the gaseous-absorption and rain-attenuation tables to
include the new bands.
Test suite: 1,335 tests, 0 failures.
MRMS
----
Layer the NOAA MRMS PrecipRate product onto the score grid so rain fade
updates every 2 minutes instead of every hour alongside HRRR. New modules:
- Microwaveprop.Weather.MrmsClient: fetches the latest .grib2.gz off the
NCEP mirror (Req auto-decompresses so no gunzip step), writes the raw
GRIB2 to a temp file, and calls the existing wgrib2 wrapper with the
0.125 propagation grid spec to get interpolated cells. Returns a
%{{lat, lon} => mm_per_hour} map with missing-value sentinels dropped.
- Microwaveprop.Weather.MrmsCache: ETS-backed GenServer mirroring
ScoreCache/GridCache. Caches a single "current" entry keyed by
valid_time with PubSub broadcast so peer nodes stay in sync and only
the Oban leader pays the fetch + regrid cost.
- Microwaveprop.Workers.MrmsFetchWorker: cron every 2 minutes, short-
circuits when the cached valid_time already matches the newest file.
Microwaveprop.Propagation.AsosNudge.compute/4 now takes an optional
rain_grid. When a cell has MRMS rain >= 0.1 mm/hr it gets patched onto
the HRRR profile's `precip_mm` field (the scorer already reads it there)
and the cell is re-scored even with no ASOS station nearby. Cells with
MRMS rain below the threshold aren't touched so dry cells keep their
raw HRRR scores (which have the wind/sky/native-gradient signal that
isn't persisted on HrrrProfile rows and would otherwise be lost).
AsosAdjustmentWorker pulls MrmsCache on every tick and passes the grid
through to AsosNudge.compute/4. Also skips the IemClient error branch
that can never happen and handles the ASOS-empty + MRMS-empty case
explicitly. MrmsCache wired into the supervision tree; MrmsFetchWorker
cron entry added to config.exs and dev.exs.
Four new AsosNudge cases cover MRMS-only re-scoring, threshold gating,
and the wet/dry score delta.
Beacons 500
-----------
Beacon.format_freq/1 and format_mw/1 crashed on whole-number floats
(e.g. 24192.0) because `frac == 0.0` could become false under float
rounding while `trim_trailing_zeros/1` stripped the decimal point,
leaving a 1-element list that couldn't be destructured as [_, frac].
Shared format_number/1 helper handles integer input directly and
pattern-matches both the "int-only" and "int + frac" shapes.
Added stream_data property tests covering the whole microwave range for
both integers and floats to catch this class of bug before prod.
UTC clock flash
---------------
The /weather and /map UTC clocks were empty until the JS hook mounted
post-WebSocket, producing a several-second blank spot on initial load
and a clobber risk on sidebar re-renders. Mount now computes a
server-rendered `initial_utc_clock` string and the template seeds the
element with that plus `phx-update="ignore"` so LiveView morphdom won't
overwrite what the hook writes.
Adds Microwaveprop.Propagation.AsosNudge: a pure IDW bias-field module
that takes ASOS observations + HRRR profiles and returns re-scored grid
rows for every cell within 250km of a reporting station. Upper-air
fields (min_refractivity_gradient, pwat_mm, hpbl_m, profile, duct
metadata) pass through unchanged so HRRR's signal isn't clobbered.
The old AsosAdjustmentWorker was unwired and buggy — nil'd out ~22% of
the scoring weight and wrote orphan timestamps. Replaced with a slim
worker that queries the latest HRRR valid_time, fetches live ASOS
currents, calls AsosNudge.compute/3, and upserts onto
(lat, lon, valid_time, band_mhz) so nudged values overwrite the HRRR
hour cleanly instead of polluting available_valid_times. After each
upsert it warms ScoreCache and broadcasts propagation:updated so live
/map clients refresh.
Cron hooked up every 10 minutes in config.exs and dev.exs. Also cleaned
up the stale "dev has propagation disabled" note in CLAUDE.md.
13 new AsosNudge unit tests cover: residual computation (co-located,
out-of-grid, nil fields), IDW weighting (single station, far station,
two equidistant stations, nil component handling), upper-air
preservation, and the compute/3 entry point's shape and radius filter.
Drive-by Styler formatting touched a handful of unrelated files from
`mix format`.
- ScoreCache stores {band, valid_time} as %{{lat, lon} => score} map so
point lookups are O(1); adds fetch_point/4 and valid_times/1
- available_valid_times/1 reads directly from ScoreCache when warm,
falls back to DB on cold start
- point_forecast/3 iterates cached valid_times and uses fetch_point/4
instead of hitting the DB per click
- NexradCache: node-local ETS cache of decoded n0q PNG pixel buffers
keyed by 5-minute rounded timestamp; skips ~1-5s HTTP+decode on
concurrent/repeat clicks within the same window
- MapLive: start_async the rain_scatter fetch so point_detail renders
immediately with a pending marker; push rain_scatter_update when
NEXRAD resolves
- MapLive: preload all 18 remaining forecast hours for the current
viewport after mount/band change/propagation_updated; client caches
them and renders timeline scrubs instantly without a server roundtrip.
Adds set_selected_time event for fast-path state sync.
- Propagation map JS: forecastCache map + drawScatterMarkers helper,
timeline click uses preloaded cache when available
- Add ScoreCache GenServer with node-local ETS table keyed by
{band, valid_time}, subscribed to "propagation:cache" PubSub topic so
every pod stays in sync with a single hourly compute
- scores_at/3 checks cache first, falls back to DB and populates on miss
- PropagationGridWorker warms and broadcasts the cache for each band
after every forecast hour upsert; prunes >2h old entries
- Replace per-pixel string-keyed Map with flat Int8Array over the CONUS
grid in propagation_map_hook.ts to eliminate allocations in the tile
rasterization hot loop (interpolateScore / propagationReach)
Aliases: add module aliases for 9 nested module references
Apply: replace apply/3 with direct module attribute calls
Line length: break 1 long spec line
Refactoring: extract helpers to reduce complexity and nesting
in show.ex, radio.ex, weather workers, terrain, duct detection,
backfill dashboard, contact map, and mix tasks
- Replace %Struct{} with Struct.t() in all @spec annotations
- Replace length(x) > 0 with x != [] in test assertions
- Fix multi-line spec struct references in weather.ex
Registered users can suggest edits to any contact's core fields
(callsigns, grids, band, mode, timestamp). Edits enter an admin
approval queue with field-by-field diff view. On approve, changes
are applied and enrichment re-enqueued if grids/band changed.
Users receive email notification on approve or reject.
Also updates dependabot.yml for mix ecosystem.
When clicking a grid point, fetches the latest NEXRAD composite
reflectivity and identifies rain cells within 300 km that could
enable rain scatter contacts. Shows:
- Scatter classification (excellent/good/marginal/none)
- Top 3 cells with dBZ, distance, bearing, and relative signal
- Colored circle markers on the map at rain cell locations
- Markers sized by reflectivity, colored by intensity
Uses simplified bistatic radar equation accounting for reflectivity,
frequency-dependent scattering (Rayleigh/Mie), and R^4 path loss.
NEXRAD cells sampled every ~5 km within bounding box for efficiency.
- Stream profile storage and score upsert instead of materializing
full 20k+ item lists (propagation_grid_worker, propagation.ex)
- GC between forecast hours and store/compute phases to reclaim
~400 MB of grid data between steps
- Single-pass field extraction in scorer.ex path_integrated_conditions
instead of 6 separate Enum traversals
- Eliminate intermediate merged map in fetch_grid by combining
merge + profile build into one pipe
- Fix UUID bug: bingenerate → generate in native grid worker
(same issue previously fixed in nexrad_worker)
Add Propagation.Region module with 8 CONUS climate zones (gulf_coast,
southeast, southern_plains, corn_belt, northeast, desert_southwest,
pacific_northwest, mountain_west) and per-region monthly seasonal
adjustment multipliers.
The scorer's score_season now takes lat/lon and applies a regional
multiplier from Region.seasonal_adjustment on top of the band's
seasonal_base + seasonal_adj. Gulf coast August gets a 1.15x boost
(drier, better for ducting) while Corn Belt August gets a 0.80x
penalty (corn evapotranspiration = miserable dewpoints).
Adjustments are hand-tuned starting points from the meteorologist's
qualitative guidance. Phase 9 recalibration will refine them from
backtest data.
Duct module (Propagation.Duct):
- refractivity_profile/1: ITU-R P.453 N at each native level
- m_profile/1: modified refractivity M = N + 157*h(km)
- detect_ducts/1: find contiguous regions where dM/dh < 0, returning
base/top height, thickness, and M-deficit per duct
- min_trapped_frequency_ghz/1: waveguide approximation (Bean & Dutton)
for the minimum frequency a duct of given geometry can trap
- analyze/1: full pipeline from native profile to duct list + best
trapped frequency across all ducts
Derive task updated to also compute ducts JSONB and best_duct_band_ghz
alongside the Phase 2 turbulence fields.
Backtest features: duct_thickness, best_duct_freq, duct_usable_10ghz,
duct_usable_24ghz, duct_usable_47ghz.
Real-data validation: 2022-08-20 12Z TX profile shows 0 ducts (M
increases monotonically) — correct for a well-mixed boundary layer
on a turbulent August afternoon (Ri=0.16).
Inversion detection module (Propagation.Inversion):
- find_inversion_top/1 walks the native profile to locate the first
temperature inversion (surface-based or elevated)
- bulk_richardson/3 computes the Richardson number across the
inversion layer (Ri < 0.25 = turbulent, > 1 = laminar/good)
- shear_magnitude/3 computes the wind shear vector magnitude
- potential_temperature/2 for θ = T*(P0/P)^0.286
Theta-e module (Weather.ThetaE):
- Bolton (1980) equivalent potential temperature
- dewpoint_from_spfh/2 via Magnus-Tetens inversion
- theta_e_jump/3 for the thermodynamic decoupling metric
mix hrrr_native_derive_fields populates inversion_top_m,
bulk_richardson, theta_e_jump_k, and shear_at_top_ms on existing
hrrr_native_profiles rows.
First real data: 2022-08-20 12Z TX profile shows inversion at
186 m, Ri = 0.16 (turbulent), θ_e jump = 0.33 K — consistent with
marginal propagation conditions at that hour.
New BandConfig entries for 902, 1296, 2304, 3456, 5760 MHz:
- All beneficial humidity effect (like 10 GHz)
- Near-zero gaseous absorption and rain attenuation
- Ranges: 902 MHz typical 400 km, 5760 MHz typical 220 km
- Same seasonal curves as 10 GHz (ducting-driven)
BandConfig.band_options/0 generates dropdown options from configs.
All pages (path, rover, submit) use centralized band_options instead
of hardcoded lists. Map page already used BandConfig.all_bands().
10 GHz remains the default on all pages.
Contact scoring now uses all HRRR profiles along the path instead of
just pos1. Aggregation strategy:
- Best along path for beneficial factors (refractivity, pressure)
- Worst along path for harmful factors (rain, wind)
- Average for neutral factors (temp, dewpoint, PWAT, BL depth)
Scorer.path_integrated_conditions/2 merges multiple profiles into a
single conditions map. Falls back gracefully to single-profile scoring
when only one profile is available.
- Fix score_pressure crash on nil pressure_mb (coastal HRRR points)
- Set 10-min timeout on grid score upsert transaction (was :infinity)
- Single DELETE for prune_old_scores instead of N queries in a loop
- Remove dead load_hrrr_refractivity that loaded 95k rows into nil map
- Pass selected_time to point_detail to skip latest_valid_time sub-query
- Batch station existence checks (1 query per path point, not per station)
- Batch solar index upserts via insert_all in chunks of 500
- Batch backfill_distances via single UPDATE FROM VALUES statement
- Add is_grid_point boolean + partial index to hrrr_profiles (replaces
non-sargable modular arithmetic filter on every weather map query)
- Add partial index on contacts(qso_timestamp) WHERE pos1 IS NOT NULL
- Move backfill enqueue to Oban worker so UI returns immediately
- Nx, Axon, EXLA, Polaris deps restricted to only: [:dev, :test]
- model.ex and training mix tasks moved to lib_ml/ (compiled via
elixirc_paths in dev/test only)
- load_ml_model uses Code.ensure_loaded? + apply/3 to avoid
compile-time references to ML modules in production
- Verified: MIX_ENV=prod compiles clean with no ML warnings
ML Integration:
- Load trained model at app startup, cache compiled predict fn in persistent_term
- Grid worker uses batched ML prediction (10K chunks) when model loaded,
falls back to algorithm scorer when not
- ML score replaces composite, algorithm factor scores preserved for detail view
- Fix process explosion: single EXLA call per chunk instead of per-grid-point
QSO Features:
- Callsign search (ILIKE on station1/station2) with trigram indexes
- Reciprocal QSO grouping (same pair, same band, same hour)
- Wider layout (max-w-7xl) for data table pages
- QSO Training Data link on map page
Infrastructure:
- Re-enable hourly propagation grid worker in dev
- Track ML model weights in git for Docker builds
- Add btree indexes on qsos (timestamp, band, distance_km)
- Remove nav icons from layout header
Add SFI, Kp max (solar), K-index, lifted index (sounding stability),
and ducting_detected (HRRR) as model features. Training now joins to
solar_indices and nearest sounding (within 6 hours) for both phases.
Model can learn solar/geomagnetic effects if they exist in the data.
- 15 features: add surface_refractivity and latitude
- Bigger network: 128→64→32 (3 hidden layers)
- Phase 1: pretrain on 500K stratified algorithm scores (all seasons/locations)
- Phase 2: fine-tune on 57K real QSO-HRRR matched data (percentile target)
- Lower LR (0.0003) for fine-tuning to preserve pretrained knowledge
- Model.train accepts :initial_state option for transfer learning
- 3 hidden layers instead of 2 for better feature interaction learning
- Target is within-band distance percentile (0-1) instead of raw
normalized distance — reduces noise from operator/equipment variation
Raw features had vastly different scales (pressure ~1013, sin/cos ~[-1,1])
causing gradient explosion. Normalize all atmospheric features to ~[0,1]
using known physical bounds. Add Polaris dep for optimizer.
Solar time (longitude/15) replaces fixed CDT/CST offset for time-of-day
scoring. Correlation analysis shows dramatic improvement at higher
frequencies: 24 GHz rho jumps from 0.056 (UTC) to 0.188 (solar), and
75 GHz corrects from spurious -0.39 to physically correct +0.24.
Score time-of-day per grid point using longitude/15 solar offset instead of
hardcoded CST/CDT. Add PWAT as 10th scoring factor. Refine pressure thresholds.
Update ML model and training pipeline to use local solar time.
Previous thresholds (-500 to -60) were calibrated for radiosonde data.
HRRR profiles have coarser vertical resolution, with gradients clustering
between -40 and -130 N/km (median -70). Nearly all grid points were
falling through to the default score of 42, wasting the refractivity
factor. New thresholds (-200 to -40) spread across HRRR percentiles.
- Add enqueue_for_qso/1 to directly enqueue weather/HRRR/terrain/IEMRE
jobs for a single user-submitted QSO (no cron, no bulk processing)
- Submit flow calls enqueue_for_qso instead of generic enqueue worker
- Add enrichment queues to prod config for on-demand processing
- Guard against HRRR fill values in store_hrrr_profiles (fixes badarith)
- Filter QSOs without pos2 in build_terrain_jobs
Replaces the one-shot startup Task with a GenServer that checks every
5 minutes whether propagation scores are older than 2 hours. If stale,
enqueues a PropagationGridWorker job (with dedup check to avoid double
queuing). Disabled in test env to avoid SQL Sandbox conflicts.
Replace circle markers with a canvas tile layer that renders smooth,
flowing colored regions using bilinear interpolation between grid
points. Colors interpolate between tiers for gradients. ~95k grid
points at 0.125 degree resolution with wgrib2 extraction.
Add Wgrib2 module that shells out to wgrib2 binary for fast GRIB2
grid extraction using -lola (nearest-neighbor to regular lat-lon grid).
Falls back to pure-Elixir decoder if wgrib2 is not installed.
Also: parallel GRIB2 range downloads, merge adjacent byte ranges,
skip corrupt messages instead of failing, pressure fetch is optional.
