Three signal sources we already collect but weren't using:
* NEXRAD composite reflectivity → rain rate via Marshall-Palmer, taken
as max of HRRR-derived and NEXRAD-derived rate so fast convective
cells between HRRR hourly analyses can still trigger the rain penalty.
Only active on f00 — forecast hours can't see future radar. New
Scorer.dbz_to_rain_rate_mmhr/1 with 5 dBZ noise floor and 150 mm/hr
hail-safe ceiling.
* hrrr_native_profiles.best_duct_band_ghz → Scorer.score_refractivity/4
applies a 1.15× boost when the cell's native-resolution duct supports
the target band's frequency. HRRR pressure-level gradients
systematically under-read thin trapping layers the native profile can
resolve. Sub-band ducts do NOT boost — they're evidence that the
gradient we have is all there is at the target frequency.
* Commercial LOS link rx_power fading → inverse tropo sensor.
Commercial.link_degradation_at/3 computes the average 7-day-baseline
vs current delta across enabled links within 75 km, ignoring links
where link_state != 1. Scorer.commercial_link_boost/2 adds +2 to +25
to the composite score for 3+ dB of fading. ~150 km radius around
DFW is the only zone this helps today, but it's the first *measured*
signal in the algorithm vs the model-derived proxies.
Also fix a latent test bug exposed by the earlier ERA5 poll-timeout
bump: era5_batch_client_test's "uncached path returns error" tests
hung for up to an hour when run with direnv's real CDS key. New
describe-level setup explicitly unsets the env var so the tests stay
hermetic.
1,359 tests, 0 failures.
Direct queries against prod (75M HRRR profiles, 16,864 soundings, 392k
surface obs, new hrrr_native_profiles table) drive these changes:
* Reinstate shallow-BL bonus as an HPBL multiplier on the refractivity
score (1.10× <200m → 0.78× ≥2000m). The Apr 11 "shallow BL bonus
removed" conclusion was an artifact of the prior matching strategy;
with the cleaner contact↔HRRR join (n=680) the binned data goes 230 km
avg at HPBL <200m vs 100 km at ≥2000m, monotonic across all bins.
* Add 6 missing bands (142, 145, 288, 322, 403, 411 GHz) so contacts in
those bands stop being silently dropped. Coefficients extrapolate
ITU-R P.676/P.838 trends from the existing 134/241 GHz entries.
* Bump ERA5 poll timeout 10 min → 1 hour and Era5MonthBatchWorker
max_attempts 3 → 5 so CDS slowness stops discarding tiles. Also dump
the full failure body when CDS omits the message field — the prior
"ERA5 job failed: nil" was masking real error reasons in oban_jobs.
* Add scripts/recalibrate_algo.py so this analysis can be re-run any
time new data lands without manual SQL. Reads PROP_PROD_DB_URL from
.envrc, drops a Markdown report into docs/algo-reports/.
* Append a dated Part 2c to algo.md documenting the corpus expansion,
the honest accounting of historical HRRR coverage (only ~1,020 of 58k
contacts are precision-matchable), and the empty era5/rtma/climatology
tables. Update the gaseous-absorption and rain-attenuation tables to
include the new bands.
Test suite: 1,335 tests, 0 failures.
Adds Microwaveprop.Propagation.AsosNudge: a pure IDW bias-field module
that takes ASOS observations + HRRR profiles and returns re-scored grid
rows for every cell within 250km of a reporting station. Upper-air
fields (min_refractivity_gradient, pwat_mm, hpbl_m, profile, duct
metadata) pass through unchanged so HRRR's signal isn't clobbered.
The old AsosAdjustmentWorker was unwired and buggy — nil'd out ~22% of
the scoring weight and wrote orphan timestamps. Replaced with a slim
worker that queries the latest HRRR valid_time, fetches live ASOS
currents, calls AsosNudge.compute/3, and upserts onto
(lat, lon, valid_time, band_mhz) so nudged values overwrite the HRRR
hour cleanly instead of polluting available_valid_times. After each
upsert it warms ScoreCache and broadcasts propagation:updated so live
/map clients refresh.
Cron hooked up every 10 minutes in config.exs and dev.exs. Also cleaned
up the stale "dev has propagation disabled" note in CLAUDE.md.
13 new AsosNudge unit tests cover: residual computation (co-located,
out-of-grid, nil fields), IDW weighting (single station, far station,
two equidistant stations, nil component handling), upper-air
preservation, and the compute/3 entry point's shape and radius filter.
Drive-by Styler formatting touched a handful of unrelated files from
`mix format`.
- ScoreCache stores {band, valid_time} as %{{lat, lon} => score} map so
point lookups are O(1); adds fetch_point/4 and valid_times/1
- available_valid_times/1 reads directly from ScoreCache when warm,
falls back to DB on cold start
- point_forecast/3 iterates cached valid_times and uses fetch_point/4
instead of hitting the DB per click
- NexradCache: node-local ETS cache of decoded n0q PNG pixel buffers
keyed by 5-minute rounded timestamp; skips ~1-5s HTTP+decode on
concurrent/repeat clicks within the same window
- MapLive: start_async the rain_scatter fetch so point_detail renders
immediately with a pending marker; push rain_scatter_update when
NEXRAD resolves
- MapLive: preload all 18 remaining forecast hours for the current
viewport after mount/band change/propagation_updated; client caches
them and renders timeline scrubs instantly without a server roundtrip.
Adds set_selected_time event for fast-path state sync.
- Propagation map JS: forecastCache map + drawScatterMarkers helper,
timeline click uses preloaded cache when available
- Add ScoreCache GenServer with node-local ETS table keyed by
{band, valid_time}, subscribed to "propagation:cache" PubSub topic so
every pod stays in sync with a single hourly compute
- scores_at/3 checks cache first, falls back to DB and populates on miss
- PropagationGridWorker warms and broadcasts the cache for each band
after every forecast hour upsert; prunes >2h old entries
- Replace per-pixel string-keyed Map with flat Int8Array over the CONUS
grid in propagation_map_hook.ts to eliminate allocations in the tile
rasterization hot loop (interpolateScore / propagationReach)
New BandConfig entries for 902, 1296, 2304, 3456, 5760 MHz:
- All beneficial humidity effect (like 10 GHz)
- Near-zero gaseous absorption and rain attenuation
- Ranges: 902 MHz typical 400 km, 5760 MHz typical 220 km
- Same seasonal curves as 10 GHz (ducting-driven)
BandConfig.band_options/0 generates dropdown options from configs.
All pages (path, rover, submit) use centralized band_options instead
of hardcoded lists. Map page already used BandConfig.all_bands().
10 GHz remains the default on all pages.
ML Integration:
- Load trained model at app startup, cache compiled predict fn in persistent_term
- Grid worker uses batched ML prediction (10K chunks) when model loaded,
falls back to algorithm scorer when not
- ML score replaces composite, algorithm factor scores preserved for detail view
- Fix process explosion: single EXLA call per chunk instead of per-grid-point
QSO Features:
- Callsign search (ILIKE on station1/station2) with trigram indexes
- Reciprocal QSO grouping (same pair, same band, same hour)
- Wider layout (max-w-7xl) for data table pages
- QSO Training Data link on map page
Infrastructure:
- Re-enable hourly propagation grid worker in dev
- Track ML model weights in git for Docker builds
- Add btree indexes on qsos (timestamp, band, distance_km)
- Remove nav icons from layout header
Score time-of-day per grid point using longitude/15 solar offset instead of
hardcoded CST/CDT. Add PWAT as 10th scoring factor. Refine pressure thresholds.
Update ML model and training pipeline to use local solar time.
Vendor Leaflet 1.9.4 (JS, CSS, marker images) and wire it into
the esbuild/Tailwind asset pipeline. Create MapLive with band
selector buttons, auto-refresh, and a colocated JS hook that
renders propagation scores as color-coded circle markers with a
legend. Stub Propagation context and BandConfig modules provide
the data interface for the scoring pipeline.
Add nav bar with links to Map, QSOs, and Submit pages.
