The single Era5MonthBatchWorker pinned an Oban slot for the full 30-45
min a CDS month-tile takes to assemble, and lost the work entirely on a
rolling deploy because the in-flight Task died with the pod. This splits
the flow into two tiny workers and persists the CDS job IDs so deploys
survive.
New pipeline:
1. Era5SubmitWorker (:era5_submit queue) — POSTs both CDS requests in
parallel, writes an `era5_cds_jobs` row with the returned job IDs,
and enqueues an Era5PollWorker scheduled +5 min. ~1s of real work.
Short-circuits when the month-tile is already cached or when a row
already exists (in-flight from a previous attempt).
2. Era5PollWorker (:era5_poll queue) — reads the row, calls
Era5Client.check_status/1 for both CDS job IDs, and:
- returns {:snooze, 300} if either job is still running (Oban
re-schedules without counting an attempt and releases the slot
immediately — a pod can keep dozens of tile-months in flight
without pinning workers)
- streams both GRIB files to disk via Req into: File.stream!,
decodes via Wgrib2.extract_grid_messages_from_file, bulk-inserts
via Era5BatchClient.decode_and_insert/6, deletes the row, and
DELETEs both completed jobs from CDS to free server-side quota
- if either leg CDS-reports failed, deletes the row + both CDS
jobs and returns {:error, reason}
Era5Client gains four testable building blocks:
submit_job/2 (bare POST → {:ok, job_id})
check_status/1 (GET → :running | {:done, src} | {:failed, reason})
download_source_to_file/3 (streams {:url, href} or writes {:body, bin})
delete_job/1 (DELETE /jobs/:id, treats 200/202/204/404 as :ok)
All Req calls now route through `era5_req_options` so tests can stub
CDS responses via Req.Test.stub(Era5Client, fn).
Era5MonthBatchWorker is retained as a thin forwarder to Era5SubmitWorker
so any jobs already in the :era5_batch queue on prod pods drain cleanly
on the next rolling deploy. Safe to delete in a follow-up.
Adds era5_cds_jobs table with a unique index on
(year, month, tile_lat, tile_lon) so duplicate submits collapse.
New queue config in runtime.exs:
era5_submit: local_limit 4, rate_limit 30/hour (burst protection)
era5_poll: local_limit 20 (polls are cheap GETs)
era5_batch: kept at 1 for legacy job drain, delete next cycle
IEM's RAOB endpoint stopped keeping Canadian stations current — most
stalled around Sep 2024 — which leaves a gap in refractivity/ducting
calibration over all the CW*/CY* stations already in weather_stations.
MSC's own tephi CSV is fixed-width and rendering-focused; the WMO TEMP
bulletins would need a full decoder. University of Wyoming serves the
same stations in a clean space-delimited format, is current, and
accepts the 3-letter station code (drop the leading C from Canadian
ICAO). Its output shape matches IemClient.parse_raob_json/1 exactly,
so it drops straight into Weather.upsert_sounding/2.
- New UwyoSoundingClient with URL builder, Req-based fetch_sounding,
and a fixed-width parse_sounding_html that extracts PRES/HGHT/TEMP/
DWPT/DRCT/SKNT from the <PRE> block and DateTime from the <H2> header.
- New CanadianSoundingFetchWorker: Oban batch worker that finds all
sounding stations whose code starts with C, picks the most recently
publishable 00Z or 12Z slot (90 min publish delay), calls UWYO per
station, and upserts with SoundingParams-derived refractivity/
ducting fields.
- Oban cron at 01:30Z and 13:30Z (dev + prod) to drive the worker.
- Req.Test plug wiring in config/test.exs.
- Captured Goose Bay fixture as test/support/fixtures/uwyo_sounding_yyr.html.
Also drops two implementation plans under docs/plans/:
- 2026-04-13-rdps-vertical-profiles.md: ~2 day plan for RDPS 10 km
Canadian ducting outside HRRR's Lambert footprint.
- 2026-04-13-hrdps-canadian-prop-grid.md: ~5 day plan for the full
HRDPS 2.5 km Canadian prop grid. Explicitly recommends doing RDPS
first.
TDD throughout, 19 new tests, 1318/1318 passing, credo strict clean.
Instead of shelling out to https://gridmap.org/locate/:callsign for
callsign → lat/lon lookups, ports the resolver pipeline from gridmap-web
into this project so the whole flow runs in-process.
New modules:
- Microwaveprop.Qrz — cache facade over the QRZ.com XML callsign API.
Looks up from qrz_callsigns first, falls back to a live fetch, and
upserts the result with a configurable cache_ttl_hours (default
168h / 7 days).
- Microwaveprop.Qrz.Client — HTTP/XML client against
https://xmldata.qrz.com/xml/current/. Holds the session key in an
Agent, transparently re-logs-in on :session_expired, and parses
responses via xmerl.
- Microwaveprop.Qrz.Callsign — Ecto schema for the qrz_callsigns
cache table, binary_id primary key per project convention.
- Microwaveprop.Qrz.Record — slim struct with only the 11 fields
we actually consume (identity, name, grid, address, lat/lon).
The full XML payload stays in the raw :data jsonb column for
anyone who wants the other ~40 QRZ fields.
- Microwaveprop.Geocoder — Req-based client against the Google Maps
Geocoding API. Only called as a fallback when QRZ has no explicit
<lat>/<lon> for the callsign.
- Microwaveprop.CallsignLocation — orchestrator. Reads the
callsign_locations cache, on miss calls Qrz then either uses QRZ's
coords directly or geocodes the formatted address, snaps to an
8-char Maidenhead grid via Microwaveprop.Radio.Maidenhead, and
upserts the result.
Microwaveprop.Radio.CallsignClient.locate/1 is rewritten to delegate
to CallsignLocation.lookup/1 and shape the response back to the
existing {:ok, %{callsign, gridsquare, lat, lon}} contract so the
callers in PathLive and RoverLive don't change.
Wiring:
- priv/repo/migrations/20260413000000_create_qrz_callsigns_and_callsign_locations.exs
creates qrz_callsigns and callsign_locations with unique indexes
on :callsign.
- Microwaveprop.Qrz.Client added to the application supervision tree
so the session Agent is started.
- :xmerl added to extra_applications so the release bundles it.
- config/test.exs wires Req.Test plugs for Microwaveprop.Qrz.Client
and Microwaveprop.Geocoder, forces cache_ttl_hours: 0 so the cache
never short-circuits test-level stubs, and supplies dummy QRZ
credentials.
- config/runtime.exs pulls QRZ_USERNAME / QRZ_PASSWORD / QRZ_AGENT
and GOOGLE_API_KEY from the environment so prod and dev can
configure both upstream keys out of band.
Tests (ported verbatim from gridmap-web):
- test/microwaveprop/qrz/callsign_test.exs — schema/changeset
- test/microwaveprop/qrz_test.exs — cache hit, cache miss, TTL
behavior, upsert on stale, error passthrough, case-insensitive
input
- test/microwaveprop/geocoder_test.exs — success, zero results,
request denied, transport error
- test/microwaveprop/callsign_location_test.exs — end-to-end flow
including the QRZ-lat/lon shortcut and the missing-address error
path
All 1294 tests still pass. Credo strict clean.
Adds Microwaveprop.Propagation.AsosNudge: a pure IDW bias-field module
that takes ASOS observations + HRRR profiles and returns re-scored grid
rows for every cell within 250km of a reporting station. Upper-air
fields (min_refractivity_gradient, pwat_mm, hpbl_m, profile, duct
metadata) pass through unchanged so HRRR's signal isn't clobbered.
The old AsosAdjustmentWorker was unwired and buggy — nil'd out ~22% of
the scoring weight and wrote orphan timestamps. Replaced with a slim
worker that queries the latest HRRR valid_time, fetches live ASOS
currents, calls AsosNudge.compute/3, and upserts onto
(lat, lon, valid_time, band_mhz) so nudged values overwrite the HRRR
hour cleanly instead of polluting available_valid_times. After each
upsert it warms ScoreCache and broadcasts propagation:updated so live
/map clients refresh.
Cron hooked up every 10 minutes in config.exs and dev.exs. Also cleaned
up the stale "dev has propagation disabled" note in CLAUDE.md.
13 new AsosNudge unit tests cover: residual computation (co-located,
out-of-grid, nil fields), IDW weighting (single station, far station,
two equidistant stations, nil component handling), upper-air
preservation, and the compute/3 entry point's shape and radius filter.
Drive-by Styler formatting touched a handful of unrelated files from
`mix format`.
- Add contacts_inserted_at_desc_id_desc_idx so /contacts list runs as an
Index Scan (~0.4ms) instead of a Seq Scan + top-N heapsort (~77ms on
58k rows)
- Add Microwaveprop.Cache: tiny ETS-backed TTL cache for memoizing
expensive-but-stale-tolerant values
- Cache total_entries for unsearched /contacts page loads (30s TTL,
invalidated on insert)
- Cache the entire /contacts/map payload (pre-encoded JSON + band list),
moving load_contacts into Radio.contact_map_payload; invalidated on
new contact insert. Mount goes from ~150-300ms to ~5ms.
- Fix /map overlay blinking on load: reuse the Leaflet GridLayer across
renderScores calls and just redraw() against the updated ScoreGrid,
instead of removeLayer + new layer which flashed between tile regens
- Make mode optional on submission: schema change (null: true),
submission_changeset no longer requires it, blank strings normalise to
nil, CSV import accepts 6-column (no mode) or 7-column layouts
- core_components .input adds a red asterisk to labels when required,
giving users a visual cue for which fields must be filled on /submit
The ownership_timeout controls how long a process can hold a checkout,
but the per-query Postgrex timeout (default 15s) is separate. Oban
inline mode chains workers synchronously, so individual queries can
exceed 15s under concurrent test load.
Generated Accounts context, User schema, and controllers via
phx.gen.auth. Adapted it for password-only login with required
email confirmation:
- Users have callsign (unique, uppercased), name, email, password
- Registration form fields: callsign, name, email, password, confirm
- Magic-link login path removed; login is email + password only
- After register, a confirmation email is sent and login is blocked
until the account is confirmed via the token URL
- Confirmation link logs the user in on first use
- SMTP2GO configured as the outgoing mailer in k8s prod
- Add enqueue_for_qso/1 to directly enqueue weather/HRRR/terrain/IEMRE
jobs for a single user-submitted QSO (no cron, no bulk processing)
- Submit flow calls enqueue_for_qso instead of generic enqueue worker
- Add enrichment queues to prod config for on-demand processing
- Guard against HRRR fill values in store_hrrr_profiles (fixes badarith)
- Filter QSOs without pos2 in build_terrain_jobs
Replaces the one-shot startup Task with a GenServer that checks every
5 minutes whether propagation scores are older than 2 hours. If stale,
enqueues a PropagationGridWorker job (with dedup check to avoid double
queuing). Disabled in test env to avoid SQL Sandbox conflicts.
When a local .hgt tile is missing, download it from the public AWS S3
skadi bucket, decompress with zlib, and write to the tiles directory
before retrying the lookup. Falls back to Open-Meteo/OpenTopo APIs if
the download fails.
Eliminates the external wgrib2 C tool dependency that blocked HRRR
processing. Implements Lambert Conformal projection, simple packing
(Template 5.0), complex packing with spatial differencing (Template 5.3),
and GRIB2 section parsing — enough to extract point values from HRRR
grid data using only Elixir.
Fetch elevation data along the path between two stations via the
Open-Meteo Elevation API (with Open-Topo-Data fallback), compute
Fresnel zone clearance, earth bulge, and knife-edge diffraction loss,
and store the results per QSO.
- terrain_profiles table with migration and TerrainProfile schema
- ElevationClient with batched API calls and fallback
- TerrainAnalysis with Fresnel/diffraction physics (ITU-R P.526-15)
- TerrainProfileWorker on Oban :terrain queue
- QsoWeatherEnqueueWorker enqueues terrain jobs automatically
- QSO show page displays verdict badge and collapsible elevation table
- Reorder show page: terrain, soundings, solar, HRRR, surface obs
- Fix Dockerfile wgrib2 build (add cmake dependency)
IEM was returning 503s under 10 concurrent workers. Three fixes:
- Req transient retry with exponential backoff on IEM requests
- WeatherFetchWorker Oban job retries failed ASOS/RAOB fetches 2-3h later
with random jitter to avoid thundering herd
- Import script concurrency reduced 10→5, weather queue capped at 3
