The Stationary-stations summary was rendering whatever the user typed
verbatim ('aa5c 33.1889, -96.4517'). Switch to a pair of helpers that
uppercase the callsign (covering legacy mixed-case rows) and synthesize
a 6-char Maidenhead grid from lat/lon when no grid was stored. Bare
coordinates no longer appear in this list — the grid carries the same
location info in a more amateur-radio-native form.
The path-profile worker now also looks up the propagation grid score for
the path midpoint at the mission's band before flipping status to
:complete, so the row never appears 'done' until both terrain and
propagation prediction have run. The show table renders that score as a
red/yellow/green badge in a new Propagation column.
Each rover-location group heading is now a link to /rover-locations/:id
so the user can jump straight to the spot's detail page from the
mission view.
Path table now shows callsign on top with grid muted below, and the
detail-only Min clearance / Diffraction columns are gone. The verdict
badge matched lowercase 'clear/blocked/marginal' but the worker stores
uppercase 'CLEAR/BLOCKED/FRESNEL_PARTIAL/FRESNEL_MINOR' from
TerrainAnalysis, so every cell silently rendered empty. Updated the
guard clauses to the actual upstream strings and added Fresnel variants.
show.ex (rover-planning) and show.ex (rover-locations) auth + delete
flows go from nested case/case/case to a `with` ladder fed by a single
`authenticated/1` clause that returns `{:ok, user}` or
`{:error, :unauthenticated}`. The else block enumerates the small set
of failure tuples instead of rebuilding nested error returns.
Other idiomatic-Elixir tightening:
- `progress_summary/1` reduces with a `tally_path/2` multi-clause
helper (status as a head pattern, not three Enum.count passes).
- `paths_by_rover_location/1` extracts `group_to_pair/1`,
`station_position/1`, and `group_lat/1` so each transformation is a
pattern match instead of an anonymous fn with `&& fallbacks`.
- `error_summary/1` is two clauses (empty vs populated errors)
instead of a pipe-into-case.
- Drag-to-edit show.ex consolidates the working-coords assigns into
`assign_working_coords/3`.
Bug fix uncovered while writing tests: `add_station` on a fresh
/rover-planning/new form was a visual no-op on the first click —
cast_assoc replaced the unseeded default Station struct with the new
params row instead of appending. Now the initial changeset is built
from `%{"stations" => %{"0" => %{"position" => "0"}}}` so add_station
appends from the get-go. Regression test added at
test/microwaveprop_web/live/rover_planning_live_test.exs.
New test branches:
- form: add_station appends on first click + remove_station drops
the targeted row.
- rover-planning show: add_rover_site whitespace-input rejection,
delete_rover_site permission denial.
- rover-locations show: save_edit rejects unauthenticated drivers.
Suite: 3228 tests, 0 failures. Credo strict: 0 issues.
A new "Rover sites" section between Stationary stations and Path
profiles lists the candidate rover locations the mission scores
against, with:
- An add form that takes the same flexible input as station inputs
(callsign, Maidenhead grid, or `lat,lon`); on submit it creates a
global :good rover-location and re-runs the path matrix.
- A per-row trash button visible to the location's owner / admins
that deletes the location and re-runs the matrix.
`RoverPlanning.candidate_rover_locations/1` is now public so the show
page can list exactly what the worker enqueues against. Add/remove
both call `replace_mission_paths/1` so the matrix stays consistent
with the rover-site set.
Anonymous visitors see a sign-in prompt instead of the form.
When a user types raw "lat,lon" coordinates into a station input,
LocationResolver populates only `lat` / `lon` — `callsign` and `grid`
stay blank. The path-profiles "Station" cell was falling through to
"33.189, -96.452" instead of showing a useful grid.
Now `station_label/1` (display) and `station_endpoint/1` (path-URL
destination) derive a 6-/8-char Maidenhead grid from the stored
lat/lon when no grid is on the row, matching the rest of the page's
grid-first presentation.
- Rows in each rover-location group are now phx-click handlers that
navigate to /path with source (rover-loc as 10-char Maidenhead grid),
destination (callsign > grid > coords), band, and rover/station
heights pre-filled — one click takes you to a ready-to-compute Path
Calculator screen.
- Station label now shows "AA5C · EM12kp" when both callsign and grid
resolved, instead of falling back to lat/lon. Bare-grid and
bare-coord stations keep their existing labels.
- Group heading uses Maidenhead.from_latlon(lat, lon, 10) so the
10-char grid is shown in full instead of being truncated to 6
characters.
The flat path table forced you to scan column 1 to mentally group rows
when standing at a specific rover spot. Each rover location now gets
its own card with a heading (grid + lat/lon + notes) and an inner
station-by-station table, so the paths to the fixed stations from the
spot you're at are read in one place.
Sorted by latitude (north → south) so the same location keeps the same
slot across re-renders. `rover_label/1` is removed (its content now
lives in the group heading).
- add_station no longer seeds `"input" => ""` in params, so used_input?/1
treats the new row as untouched and hides the validate_required error
until the user types.
- Show page's format_distance/format_db/format_meters helpers coerce with
`* 1.0` because JSONB returns bare zeros as integers, which crashed
Float.round/2 (FunctionClauseError on /rover-planning/:id render).
- Lat/lon row uses items-start + mt-6 trash so the inputs stay aligned
even when the callsign cell grows from validation feedback.
The hidden 'false' shadow input was rendered after the checkbox, so when
both were submitted the 'false' value overwrote the checkbox 'true' in
the resulting params map. Move the hidden input before the checkbox so
the checked value wins (matching the core_components checkbox pattern).
Renames the rover-location status enum and every label that referenced
it. Existing rows are migrated in place. Also touches the consumers:
- Rover.Location enum + default
- RoverLocationsLive index, status filter, form, show, badges
- Rover.Compute and rover_live (only_ideal_locations → only_good_locations)
- RoverPlanning context candidate filter (status == :good)
- RoverPlanning.Show / Form copy
- All rover-related tests
Adds a new globally-scoped, owner-mutable rover-mission tracker:
- /rover-planning paginated table (LiveTable) with View/Edit/Delete
- /rover-planning/new + /:id/edit form: name, band, antenna heights,
notes, "only check against known good locations" toggle (default on),
and a dynamic list of stationary stations entered as callsigns,
Maidenhead grids, or lat,lon pairs (Station changeset geocodes via
LocationResolver, lat/lon stays editable after add)
- /rover-planning/:id show page renders the station list, scope, and a
matrix of computed path profiles (distance, min clearance, diffraction,
verdict) populated as the worker completes each pairing
After save, RoverPlanning enqueues one RoverPathProfileWorker job per
(rover-location × station) pairing. The worker mirrors PathLive's
synchronous compute (ElevationClient + TerrainAnalysis at the mission's
band + heights) and stores the result on the matching path row.
PubSub broadcast on completion lets the show page live-refresh.
Admins can edit/delete any mission; owners can edit their own.
